Brønsted Acid Catalyzed Tandem Defunctionalization of Biorenewable Ferulic acid and Derivates into Bio-Catechol

An efficient conversion of biorenewable ferulic acid into bio-catechol has been developed. The transformation comprises two consecutive defunctionalizations of the substrate, that is, C−O (demethylation) and C−C (de-2-carboxyvinylation) bond cleavage, occurring in one step. The process only requires heating of ferulic acid with HCl (or H₂SO₄) as catalyst in pressurized hot water (250 °C, 50 bar N₂). The versatility is shown on a variety of other (biorenewable) substrates yielding up to 84 % di- (catechol, resorcinol, hydroquinone) and trihydroxybenzenes (pyrogallol, hydroxyquinol), in most cases just requiring simple extraction as work-up.     

DPPH (= 2,2‐Diphenyl‐1‐picrylhydrazyl = 2,2‐Diphenyl‐1‐(2,4,6‐trinitrophenyl)hydrazyl) Radical‐Scavenging Reaction of Protocatechuic Acid Esters (= 3,4‐Dihydroxybenzoates) in Alcohols: Formation of Bis‐alcohol Adduct

Protocatechuic acid esters (= 3,4‐dihydroxybenzoates) scavenge ca. 5 equiv. of radical in alcoholic solvents, whereas they consume only 2 equiv. of radical in nonalcoholic solvents. While the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents as compared to that in nonalcoholic solvents is due to a nucleophilic addition of an alcohol molecule at C(2) of an intermediate o‐quinone structure, thus regenerating a catechol (= benzene‐1,2‐diol) structure, it is still unclear why protocatechuic acid esters scavenge more than 4 equiv. of radical (C(2) refers to the protocatechuic acid numbering). Therefore, to elucidate the oxidation mechanism beyond the formation of the C(2) alcohol adduct, 3,4‐dihydroxy‐2‐methoxybenzoic acid methyl ester ( 4 ), the C(2) MeOH adduct, which is an oxidation product of methyl protocatechuate ( 1 ) in MeOH, was oxidized by the DPPH radical (= 2,2‐diphenyl‐1‐picrylhydrazyl) or o‐chloranil (= 3,4,5,6‐tetrachlorocyclohexa‐3,5‐diene‐1,2‐dione) in CD₃OD/(D₆)acetone 3 : 1). The oxidation mixtures were directly analyzed by NMR. Oxidation with both the DPPH radical and o‐chloranil produced a C(2),C(6) bis‐methanol adduct ( 7 ), which could scavenge additional 2 equiv. of radical. Calculations of LUMO electron densities of o‐quinones corroborated the regioselective nucleophilic addition of alcohol molecules with o‐quinones. Our results strongly suggest that the regeneration of a catechol structure via a nucleophilic addition of an alcohol molecule with a o‐quinone is a key reaction for the high radical‐scavenging activity of protocatechuic acid esters in alcoholic solvents.     

Unconventional Assembly of Bimetallic Au–Ni Janus Nanoparticles on Chemically Modified Silica Spheres

This paper reports that Janus Au?Ni nanoparticles (JANNPs) can self‐assemble onto silica spheres in a novel way, which is different from that of single‐component isotropic nanoparticles. JANNPs modified with octadecylamine (ODA) assemble onto catechol‐modified silica spheres (SiO₂?OH) to form a very special core–loop complex structure and finally the core–loop assemblies link each other to form large assemblies through capillary force and the hydrophobic interaction of the alkyl chains of ODA. The nanocomposites disassemble in the presence of vanillin and oleic acid because of the breakage of the catechol–metal link. Vanillin‐induced disassembly enables the JANNPs to reassemble into a core–loop structure upon ODA addition. The assembly of SiO₂?OH and isotropic Ni or Fe₃O₄ particles generates traditional core–satellite structures. This unconventional self‐assembly can be attributed to the synergistic effect of Janus specificity and capillary force, which is also confirmed by the assembly of thiol‐terminated silica spheres (SH?SiO₂) with anisotropic JANNPs, isotropic Au, and Ni nanoparticles. These results can guide the development of novel composite materials using Janus nanoparticles as the primary building blocks.     

Hexa­methyl­enetetra­mine–4‐nitro­catechol–water (1/2/1)

In the title adduct, 1,3,5,7‐tetra­aza­tri­cyclo[3.3.1.1^3,7]dec­ane–4‐nitro­benzene‐1,2‐diol–water (1/2/1), C₆H₁₂N₄·2C₆H₅NO₄·H₂O, the hexa­methyl­ene­tetra­mine mol­ecule acts as an acceptor of intermolecular O—H?N hydrogen‐bonding interactions from the water mol­ecule and the hydroxy groups of one of the two symmetry‐independent 4‐nitro­catechol mol­ecules. The structure is built from molecular layers which are stabilized by three intermolecular O—H?O, two intermolecular O—H?N and four intermolecular C—H?O hydrogen bonds. The layers are further interconnected by one additional intermolecular O—H?N and two intermolecular C—H?O hydrogen bonds.     

Semi‐Crystalline Polar Polyethylene: Ester‐Functionalized Linear Polyolefins Enabled by a Functional‐Group‐Tolerant,Cationic Nickel Catalyst

A dibenzobarrelene‐bridged, α‐diimine Ni^II catalyst (rac‐ 3 ) was synthesized and shown to have exceptional behavior for the polymerization of ethylene. The catalyst afforded high molecular weight polyethylenes with narrow dispersities and degrees of branching much lower than those made by related α‐diimine nickel catalysts. Catalyst rac‐ 3 demonstrated living behavior at room temperature, produced linear polyethylene (T_m=135 °C) at ?20 °C, and, most importantly, was able to copolymerize ethylene with the biorenewable polar monomer methyl 10‐undecenoate to yield highly linear ester‐functionalized polyethylene.     

The chain‐breaking antioxidant activity of phenolic compounds with different numbers of O‐H groups as determined during the oxidation of styrene

The technique based on monitoring oxygen consumption was applied to test 18 polyphenols (PP) and model phenolics as a chain‐breaking antioxidant during the oxidation of styrene initiated by 2,2′‐azobis(2,4‐dimethylvaleronitril) at 37°C. The chain‐breaking capability of PP was characterized by two parameters: the rate constant k₁ for the reaction of antioxidants with the peroxy radical produced from styrene and the stoichiometric coefficient of inhibition, f, which shows how many kinetic chains are terminated by one molecule of PP. Rate constants k₁ × 10⁵ (in M^?1 s^?1) were found to be 10 (catechol), 27 (pyrogallol), 34 (3,6‐di‐tert‐Bu‐catechol), 4.3 (protocatechic acid), 12 (gallic acid), 15 (caffeic acid), <0.01 (chrysin), 1.3 (kaempferol), 19 (quercetin), 5.3 (baicalein), 16 (epicatechin), 32 (epigallocatechin), 9.0 (dihydroquercetin), 3.3 (resveratrol), and 16 (nordihydroguaiaretic acid). The value of k₁ increases when going from one to two and three adjacent O‐H groups in a benzene ring (catechol and pyrogallol derivatives, respectively). At the same time, two O‐H groups in metaposition in a A‐ring of flavonoids actually do not participate in the inhibition. For the majority of PP, f is near to 2 independent of the number of OH groups. The correlation of k₁ with the structure of PP and the O? H bond dissociation enthalpy has been discussed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 92–100, 2009     

Towards Truly Sustainable Polymers: A Metal‐Free Recyclable Polyester from Biorenewable Non‐Strained γ‐Butyrolactone

The first effective organopolymerization of the biorenewable “non‐polymerizable” γ‐butyrolactone (γ‐BL) to a high‐molecular‐weight metal‐free recyclable polyester is reported. The superbase tert‐Bu‐P₄ is found to directly initiate this polymerization through deprotonation of γ‐BL to generate reactive enolate species. When combined with a suitable alcohol, the tert‐Bu‐P₄‐based system rapidly converts γ‐BL into polyesters with high monomer conversions (up to 90 %), high molecular weights (M_n up to 26.7 kg mol^?1), and complete recyclability (quantitative γ‐BL recovery).     

Copper‐based Metal‐organic Framework Applied in the Development of an Electrochemical Biomimetic Sensor for Catechol Determination

In this study, the synthesis and characterization of a Cu‐based metal‐organic framework (MOF) [Cu₃(BTC)₂(H₂O)₃]_n (where BTC=benzene‐1,3,5‐tricarboxylate), known as HKUST‐1, were performed. The Cu‐MOF was applied in the modification of a carbon paste to obtain a biomimetic sensor for the electrochemical determination of catechol. Kinetic assays confirmed that the Cu‐MOF acts as a catalyst for the oxidation of catechol and it can be considered as a catechol oxidase mimetic. Under optimized conditions, the calibration curve for catechol presented a linear range of 8.0×10⁻⁷ to 3.2×10⁻⁵ mol L⁻¹, with detection limit of=1.0×10⁻⁷ mol L⁻¹. The sensor demonstrated good intra‐day repeatability and inter‐electrode reproducibility (relative standard deviations of 3.8 % (n=10) and 4.3 % (n=6), respectively). In the selectivity study, an adequate peak‐to‐peak separation was observed for hydroquinone and uric acid in relation to catechol, demonstrating that this sensor has the potential for use in the simultaneous determination of these compounds. This sensor was successfully applied in the determination of catechol in water samples.     

An Enantioselective Bidentate Auxiliary Directed Palladium‐Catalyzed Benzylic C−H Arylation of Amines Using a BINOL Phosphate Ligand

A new enantioselective palladium(II)‐catalyzed benzylic C?H arylation reaction of amines is enabled by the bidentate picolinamide (PA) directing group. This reaction provides the first example of enantioselective benzylic γ‐C?H arylations of alkyl amines, and proceeds with up to 97 % ee. The 2,2′‐dihydroxy‐1,1′‐binaphthyl (BINOL) phosphoric acid ligand, Cs₂CO₃, and solvent‐free conditions are essential for high enantioselectivity. Mechanistic studies suggest that multiple BINOL ligands are involved in the stereodetermining C?H palladation step.     

Proline‐Tetrazole‐Catalyzed Enantioselective N‐Nitroso Aldol Reaction of Aldehydes with In Situ Generated Nitrosocarbonyl Compounds

A highly enantioselective method (up to 98 % ee) for the preparation of β‐amino alcohols was achieved by using the readily available proline‐tetrazole as the catalyst for the N‐nitroso aldol reaction of aldehydes with in situ generated nitrosocarbonyl compounds. The key to success of this reaction is the use of MnO₂ as an oxidant and catechol as a Brønsted acid additive.     

Polysulfone ionomers functionalized with benzoyl(difluoromethylenephosphonic acid) side chains for proton‐conducting fuel‐cell membranes

Polysulfones carrying benzoyl(difluoromethylenephosphonic acid) side chains were prepared and investigated for use as proton‐conducting fuel‐cell membranes. In the first step, polysulfones were lithiated and reacted with methyl iodobenzoates to prepare p‐ and o‐iodobenzoyl polysulfones. Next, the phosphonated polysulfones were prepared via CuBr‐mediated cross‐coupling reactions between the iodinated polymer and [(diethoxyphosphinyl)difluoromethyl]zinc bromide. Finally, dealkylation with bromotrimethylsilane afforded highly acidic ? CF₂? PO₃H₂ derivatives. The replacement of the iodine atoms by ? CF₂? PO₃Et₂ units was almost quantitative in the case of o‐iodobenzoyl polysulfone. Membranes based on ionomers having 0.90 mmol of phosphonic acid units/g of dry polymer took up 6 wt % water when immersed at room temperature, and conductivities up to 5 mS cm^?1 at 100 °C were recorded. This level of conductivity was comparable to that reached by a membrane based on a sulfonated polysulfone having 0.86 mmol of sulfonic acid/g of dry polymer. Thermogravimetry revealed that the aryl? CF₂? PO₃H₂ arrangement decomposed at approximately 230 °C via cleavage of the C? P bond. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 269–283, 2007.     

A Kinetic Study on Catechol‐Based Belousov–Zhabotinsky Reaction

The present investigation pertains to the kinetic study on bromate‐driven and manganese ion catalyzed Belousov–Zhabotinsky oscillatory chemical reaction having catechol (1,2‐dihydroxybenzene) as the organic substrate in aqueous acid media at 30 ± 0.1^oC under stirred conditions. Although some polyphenols as chemical oscillators are known in the literature but the role of catechol has been marginalized. The reaction system with catechol shows long‐time series of periodic as well as aperiodic oscillations, which were monitored potentiometrically in the oxidation reduction potential (ORP) mode under batch conditions. The various oscillatory parameters such as induction time (t_in), time period (t_p), amplitude (A), and number of oscillations (N) were obtained by drawing a plot between redox potential (mV) versus time (s). It is found that the oscillatory parameters of the system vary with the concentration of the reacting species. The reaction system was also studied in different aqueous acid media, but the detailed studies with respect to experimental parameters have been made in aqueous sulfuric acid medium as it showed a broad oscillatory window and better oscillatory characteristics. Moreover, the oscillatory parameters in general and induction time in particular vary significantly with temperature (15 to 45 ± 0.1^oC). The activation parameters of the system have also been calculated. The oscillatory behavior of the reaction system was also confirmed spectrophotometrically. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 141–151, 2013     

Intermolecular interactions in the chiral and racemic forms of 3‐­hydroxy‐2‐(1‐oxoisoindolin‐2‐yl)­butanoic acid derived from threonine

The title compounds, C₁₂H₁₃NO₄, are derived from l ‐threonine and dl ‐threonine, respectively. Hydro­gen bonding in the chiral derivative, (2S/3R)‐3‐hydroxy‐2‐(1‐oxoisoindolin‐2‐yl)­butanoic acid, consists of O—H_acid?O_alkyl—H?O=C_indole chains [O?O 2.659 (3) and 2.718 (3) Å], Csp³—H?O and three C—H?π_arene interactions. In the (2R,3S/2S,3R) racemate, conventional carboxylic acid hydrogen bonding as cyclical (O—H?O=C)₂ [graph set R₂²(8)] is present, with O_alkyl—H?O=C_indole, Csp³—H?O and C—H?π_arene interactions. The COOH group geometry differs between the two forms, with C—O, C=O, C—C—O and C—C=O bond lengths and angles of 1.322 (3) and 1.193 (3) Å, and 109.7 (2) and 125.4 (3)°, respectively, in the chiral structure, and 1.2961 (17) and 1.2210 (18) Å, and 113.29 (12) and 122.63 (13)°, respectively, in the racemate structure. The O—C=O angles of 124.9 (3) and 124.05 (14)° are similar. The differences arise from the contrasting COOH hydrogen‐bonding environments in the two structures.     

Alkali‐Metal ortho‐Hydroxyphenolates: Syntheses and Crystal Structures from Powder X‐Ray Diffraction

Colorless and highly air‐ and moisture‐sensitive powders of M[o‐C₆H₄O(OH)] with M = K, Rb, or Cs have been synthesized from reaction mixtures of the appropriate alkali metal and catechol in thf. All compounds were structurally characterized by means of powder X‐ray diffraction using the Rietveld profile refinement technique including restraints for the C—C/C—O bond distances and the C—C—C angles. The atomic arrangements of M[o‐C₆H₄O(OH)] (K: monoclinic P2₁/c; Rb/Cs: orthorhombic Pbcm) are characterized by polymeric chains of [M₁^[4]O₂^[2]η⁶] units connected by hydrogen bonds, thereby making up layered structures similar to the one of catechol. The coordinatively unsaturated alkali metals are forming edge‐sharing MO₄ pyramids and exhibit asymmetrical η⁶‐interactions with the phenylene rings. The symmetry of the unit cells increases with increasing size of the cation, and this results in a decrease of the monoclinic angle from 118.5° (catechol) to 93.7° (K compound), eventually leading to orthorhombic cells for the Rb and Cs compounds.     

Nitro‐substituted iron(II) tridentate bis(imino)pyridine complexes as high‐temperature catalysts for the production of α‐olefins

A new series of nitro‐substituted bis(imino)pyridine ligands {2,6‐bis[1‐(2‐methyl‐4‐nitrophenylimino)ethyl]pyridine, 2,6‐bis[1‐(4‐nitrophenylimino)ethyl]pyridine, (1‐{6‐[1‐(4‐nitro‐phenylimino)‐ethyl]‐pyridin‐2‐yl}‐ethylidene)‐(2,4,6‐trimethyl‐phenyl)‐amine, and 2,6‐bis[1‐(2‐methyl‐3‐nitrophenylimino)ethyl]pyridine} and their corresponding Fe(II) complexes [{p‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐ Me? p‐NO₂}FeCl₂ ( 10 ), L₂FeCl₂ ( 11 ), {m‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? m‐NO₂}FeCl₂ ( 12 ), and {p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Mes}FeCl₂ ( 14 )] were synthesized. According to X‐ray analysis, there were shortenings of the axial Fe? N bond lengths (up to 0.014 Å) in para‐nitro‐substituted complex 10 and (up to 0.015 Å) in meta‐nitro‐substituted complex 12 versus the Fe(II) complex without nitro groups [{o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me}FeCl₂ ( 1 )]. Complexes 10 , 12 , and 14 afforded very active catalysts for the production of α‐olefins and were more temperature‐stable and had longer lifetimes than parent non‐nitro‐substituted Fe(II) complex 1 . The reaction between FeCl₂ and a sterically less hindered ligand [p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Ph? p‐NO₂] resulted in the formation of octahedral complex 11 . A para‐dialkylamino‐substituted bis(imino)pyridine ligand [p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂] and the corresponding Fe(II) complex [{p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂}FeCl₂ ( 16 )] were synthesized to evaluate the effect of enhanced electron donation of the ligand on the catalytic performance. According to X‐ray analysis, there was a shortening (up to 0.043 Å) of the axial Fe? N bond lengths in para‐diethylamino‐substituted complex 16 in comparison with parent Fe(II) complex 1 . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2615–2635, 2006     

(–)‐Dioxosantadienic acid: hydrogen‐bonding patterns in a bicyclic sesquiterpenoid keto acid and its mono­hydrate

The an­hydrous form, (I), of the title compound, (?)‐2‐(1,2,3,4,4a,7‐hexa­hydro‐4a,8‐di­methyl‐1,7‐dioxo‐2‐naphthyl)­propionic acid, C₁₅H₁₈O₄, derived from a naturally occurring sesquiterpenoid, has two mol­ecules in the asymmetric unit, (I) and (I′), differing in the conformations of the saturated ring and the carboxyl group. The compound aggregates as carboxyl‐to‐ketone hydrogen‐bonding catemers [O?O = 2.776 (3) and 2.775 (3) Å]. Two crystallographically independent sets of single‐strand hydrogen‐bonding helices with opposite end‐to‐end orientation pass through the cell in the b direction, one consisting exclusively of mol­ecules of (I) and the other entirely of (I′). Three C—H?O=C close contacts are found in (I). The monohydrate, C₁₅H₁₈O₄·H₂O, (II), with two mol­ecules of (I) plus two water mol­ecules in its asymmetric unit, forms a complex three‐dimensional hydrogen‐bonding network including acid‐to‐water, water‐to‐acid, water‐to‐ketone, water‐to‐water and acid‐to‐acid hydrogen bonds, plus three C—H?O=C close contacts. In both (I) and (II), only the ketone remote from the acid is involved in hydrogen bonding.     

()‐12‐Oxotri­cyclo­[6.2.2.01,6]­dodec­ane‐10‐carboxyl­ic acid: hydrogen bonding in a tricyclic δ‐keto acid

The ring system of the title compound, C₁₃H₁₈O₃, was synthesized by addition of ethyl acryl­ate to the dien­amine of 2‐octalone. The keto acid aggregates in the solid as acid‐to‐acid dimers [O?O = 2.663 (2) Å and O—H?O = 170 (3)°] whose centrosymmetric hydrogen bonds lie across the a edges and the center of the chosen cell. Three intermolecular C—H?O close contacts within 2.7 Å were found involving the ketone group.     

A new route for the synthesis of phosphate esters: 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide

Podand‐type ligands are an interesting class of acyclic ligands which can form host–guest complexes with many transition metals and can undergo conformational changes. Organic phosphates are components of many biological molecules. A new route for the synthesis of phosphate esters with a retained six‐membered ring has been used to prepare 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, C₆H₄{O[cyclo‐P(O)OCH₂CMe₂CH₂O]}₂ or C₁₆H₂₄O₈P₂, (1), 2‐[(2′‐hydroxybiphenyl‐2‐yl)oxy]‐5,5‐dimethyl‐1,3,2‐dioxaphosphinane 2‐oxide, [cyclo‐P(O)OCH₂CMe₂CH₂O](2,2′‐OC₆H₄–C₆H₄OH), (2), and oxybis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, O[cyclo‐P(O)OCH₂CMe₂CH₂O]₂, (3). Compound (1) is novel, whereas the results for compounds (2) and (3) have been reported previously, but we record here our results for compound (3), which we find are more precise and accurate than those currently reported in the literature. In (1), two cyclo‐P(O)OCH₂CMe₂CH₂O groups are linked through a catechol group. The conformations about the two catechol O atoms are quite different, viz. one C—C—O—P torsion angle is −169.11 (11)° and indicates a trans arrangement, whereas the other C—C—O—P torsion angle is 92.48 (16)°, showing a gauche conformation. Both six‐membered POCCCO rings have good chair‐shape conformations. In both the trans and gauche conformations, the catechol O atoms are in the axial sites and the short P=O bonds are equatorially bound.     

Designing catechol‐end functionalized poly(DMAm‐co‐NIPAM) by RAFT with tunable LCSTs

Providing catechol‐end functionality to controlled structure lower critical solution temperature (LCST) copolymers is attractive, given the versatility of catechol chemistry for tethering to nanostructures. Controlled polymer chain lengths with catechol RAFT end groups are of interest to provide tunable LCST behavior to nanoparticles, although these polymerizations are relatively unexplored. Herein, the reactivity ratios for the RAFT copolymerization of N,N‐dimethylacrylamide (DMAm) and N‐isopropylacrylamide (NIPAM) pairs based on catechol‐end RAFT agents using an in situ NMR technique were first determined. Several catechol‐end poly(DMAm‐co‐NIPAM) samples were then prepared using the RAFT agent to provide copolymer. The reactivity ratios for the DMAm‐NIPAM pair were r_DMAm = 1.28–1.31 and r_NIPAM = 0.48–0.51. All the poly(DMAm‐co‐NIPAM) samples were found to have M_n values ≤ 26 kDa and Ð < 1.08 with LCST values ranging from 31 to 92°C, while maintaining a short range of glass transition temperature (T_g = 118–137°C). The difference in LCST values for the catechol functionalized poly(DMAm‐co‐NIPAM) based on 0.5 wt% aqueous buffered solutions at pH 5.5 and 8.5 was found to be <3.0°C. These conditions are suitable for subsequent catechol‐induced coordination and nucleophilic addition chemistry for covalent and noncovalent linkages during subsequent post‐modification. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4062–4070     

Synthesis of ϵ‐Caprolactam from Cyclohexanone Oxime Using Zeolites Hβ, HZSM‐5, and Alumina Pillared Montmorillonite

The Beckmann rearrangement of cyclohexanone oxime (CHO) to ?‐caprolactam (?‐C) was studied in a plug flow reactor at 300–400°C under atmospheric pressure by using Hβ, ZSM‐5, and alumina pillared montmorillonite. With Hβ(X) Y zeolites, raising the SiO₂/Al₂O₃ molar ratio (X) results in the enhancement of catalyst acid strength with concomitant decrease of the total acid amount. In creasing the calcination temperature (Y) causes remarkable diminution of catalyst surface area, acid strength, and acid amount. A similar trend was found for AlPMY catalysts. In there action of CHO, the initial catalytic activity correlates well with the total acid amount of various catalysts except for Hβ(10) Y (Y > 600°C). The reaction proceeds on both Brönsted and Lewis acid sites and the catalyst deactivation most likely occurs at the strong Brönsted acid sites. The effect of solvents in the feed on the catalytic results was also investigated; it was found that polar solvents such as ethanol or n‐butanol give high ?‐C yield and longer catalyst life time. In the reaction of CHO/C₂H₅OH over Hβ(10)800 at 400°C and W/F 74.6 gh/mol, the CHO conversion and ?‐C yield remain 100% and 92%, respectively, for at least 20 h time‐on‐stream. The reaction paths and the mechanism for ?‐C formation are proposed.