Über einige Komplexboride von Übergangsmetallen

Zusammenfassung Dreistofflegierungen in dem Kombinationen {Mo, W}-{Fe, Co, Ni}-B; {V, Nb, Ta, Mo, W}-B-Al werden vornehmlich auf die Existenz von Komplexboriden hin untersucht. Die isotypen Phasen Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ und W₂NiB₂ sind strukturell mit Mo₂FeB₂ verwandt, aber doch von dieser Phase verschieden. Gefunden werden außerdem die isotypen Phasen MoCoB und WCoB. Das Problem der -Phase wird diskutiert. In manchen Fällen tritt ein Zwischenzustand auf, der vermutlich durch Stapelfehler einer Unterzelle (c/3 in hexagonaler Aufstellung) hervorgerufen wird. Neben dem Auftreten ternärer Phasen bei Nb-B-Al und Ta-B-Al wird eine ausgeprägte Mischphasenbildung: (Nb, Al)B₂ und (Ta, Al)B₂ beobachtet. Der Dreistoff: Mo-B-Al ist durch die ternäre Phase MoBAl gekennzeichmet, ferner tritt der durch Al stabilisierte CrB-Typ auf (Mo_0,45B_0,50Al_0,05). Die Gleichgewichtsverhältnisse in denT-B-Al-Dreistoffen werden abgeschätzt.

---

Alloys of the combinations {Mo, W}-{Fe, Co, Ni}-B, {V, Nb, Ta, Mo, W}-B-Al have been examined with respect to the existence of complex borides. The phases of the approximate formula Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ and W₂NiB₂ have been found to be isotypic. They do however not correspond to Mo₂FeB₂ having U₃Si₂ structure. Two other complex borides of formula MoCoB and WCoB have been detected having the same crystal structure. The problem of the -phases which partially contain boron will be discussed considering the supposedly occurring stacking faults of a subcell unit (c=c/3 for hexagonal symmetry). Besides formation of ternary compounds for: Nb-B-Al and Ta-B-Al an extended solid solution (Nb, Al)B₂ and (Ta, Al)B₂ has been observed. The Mo-B-Al-system is characterized by the ternary phase of formula MoBAl. Mo-monoboride having CrB-type has been found to be stabilized by a small amount of Al, thus Mo_0,45B_0,50Al_0,05 being formed. The phase equilibria within the ternary systems have been established for the major part.

---

---

Mit 4 Abbildungen     

Donorstärken in 1,2-Dichloräthan

Zusammenfassung Kalorimetrische und spektrophotometrische Untersuchungen über die Donorstärke einer Anzahl nicht-wäßriger Lösungsmittel zeigen, daß die relative Reihung der Donorstärken unabhängig von der Natur des Akzeptors ist. Die Donorreihung lautet gegenüber SbCl₅, Jod und Phenol folgendermaßen: Pyridin > Dimethylsulfoxid > Dimethylacetamid Dimethylformamid > > Trimethylphosphat Diphenylphosphoroxychlorid > Diäthyläther > Aceton > Propandiol-1,2-carbonat > Acetonitril > > Selenoxychlorid Phosphoroxychlorid Benzoylchlorid > > Thionylchlorid > Sulfurylchlorid.

---

Calorimetric and spectrophotometric work on the donor strength of various non-aqueous solvents have shown that the relative order of donor strength is independent from the nature of the acceptor. The order of donor strength towards SbCl₅, I₂ and phenole is pyridine > dimethylsulfoxide > dimethylacetamide dimethylformamide > trimethylphosphate diphenylphosphonic chloride > diethyl ether > acetone > propane diol-1,2-carbonate > acetonitrile > selenium oxychloride phosphorus oxychloride benzoyl chloride > thionyl chloride > sulfuryl chloride.

---

---

Mit 1 Abbildung     

Simple screening method for the fast determination of clenbuterol in animal feeds

Summary A simple method for the determination of clenbuterol is described. It is extracted from the sample at pH 3 and then at pH 11, followed by partitioning the analyte into water at pH 3 and reextraction into ethyl acetate at pH 9. Clenbuterol is oxidized with KMnO₄ to clenbuteron for GC-determination. Recoveries for 0.01– 1.0 mg/kg were between 70% and 110% (standard deviation ±14%, n = 18).

---

Eine einfache Screening-Methode zur schnellen Bestimmung von Clenbuterol in tierischen Futtermitteln

     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.     

Purification of americium from bulk quantities of plutonium loading effluent using trilaurylamine

Four litres of Am solution containing 81.5 mg/l Am and 0.6 mg/l Pu could be purified by a two-step procedure involving solvent extraction and extraction chromatography with trilaurylamine. The final product contained a maximum concentration of 9 g/l Pu.     

Determination of239,240Pu and241Am in environmental samples

An accurate and reliable method has been developed and routinely carried out for the sequential determination of^239,240Pu and²⁴¹Am in environmental samples. After suitable pretreatment.^239,240Pu and²⁴¹Am are separated from other elements by means of the anion exchange resin method. Americium-241 is purified by coprecipitation with calcium oxalate and then ion exchanged in mixed media of the mineral acid-methanol. In the analysis,²⁴²Pu (or²³⁶Pu) and²⁴⁴Cm are used as chemical yield monitors. The recoveries of the yield monitors in the analyses of some kinds of environmental samples were 7080% for plutonium and 7686% for curium. The concentration of^239,240Pu in the coastal sea water were 7.022 Bq/l and that of²⁴¹Am was 1.26.3 Bq/l. The mean concentrations of^239,240Pu in the edible parts of the marine products ranged from 0.22 to 7.4 mBq/kg · fresh and those of²⁴¹Am ranged from 0.11 to 2.6 mBq/kg · fresh.     

Ab initio investigation of the electron structure in bis-Cu+ acetylene and vinylidene complexes

[Cu(-C₂H₂)₂]⁺, [Cu(-CCH₂)₂]⁺ and [Cu(-C₂H₂) (-CCH₂]⁺ complexes have been studied by the ab initio double-zeta basis set method. It has been established that all calculated compounds are stable to decomposition into two C₂H₂ molecules and Cu⁺ cation and into one C₂H₂ molecules and the respective monocomplex. Calculation results suggest the possibility of intramolecular acetylene-vinylidene rearrangement in the coordination sphere of Cu⁺.

---

ab initio : [Cu(-C₂H₂)₂]⁺, [Cu(-CCH₂)₂]⁺, [Cu(-C₂H₂) (-CCH₂)]⁺. C₂H₂ Cu⁺ C₂H₂ . - Cu⁺.

     

Strategies to vectorize conventional SCF-Cl algorithms

Recent high-performance computers, especially supercomputers, achieve very high-speed operations but bring about serious I/O problems in quantum chemical computations. Strategies to vectorize conventional SCF-CI algorithms are discussed relating to the I/O problems. The conventional SCF-CI algorithm which is proposed here reduces I/O processing by eliminating all sorting routines and redundant integral files and generates directly nonzero and nonredundant PK integrals with a vectorizable canonically-ordered list. The new implementation has been undertaken and successfully realized as a program system named GSCF3. The vector to scalar acceleration rate of GSCF3 on the HITAC S-810 are as follows: 2.5 5 in the AO integral evaluation, 5 12 in the SCF calculation, 15 30 in the four-index integral transformation, 10 20 in the CI matrix diagonalization, and overall 510 through SCF-CI.     

Reaction of triphenyl phosphite ozonide with thioacetals

Kinetic regularities in the reaction of triphenyl phosphite ozonide with several thioacetals in CH₂Cl₂ solution at –15°C have been studied. The consumption rate of ozonides is described by the kinetic equation W=k₀[(C₆H₅O)₃P·O₃]+k₁[(C₆H₅O)₃P·O₃][R₁R₂C(SR₃)₂] Rate constants k₀ and k₁ for the thioacetals: (CH₃H₇S)₂CH₂, (C₆H₅S)₂CH₂, (C₆H₅CH₂S)₂CH, (n=C₁₂H₂₅–S)₂CH₂, (C₃H₇S)₂C(H)CH₃, (C₃H₇S)₂C(H)C₆H₅, (C₃H₇S)₂C(CH₃)C₆H₅ and (C₃H₇S)₂C(H)C₁₀H₉, increases with increasing the electron-donating power of subtituents R_i.

---

CH₂Cl₂ –15°C. : W=k₀[(C₆H₅O)₃P·O₃]+k₁[(C₆H₅O)₃P·O₃][R₁R₂C(SR₃)₂] k₀ k₁ (C₃H₇S)₂CH₂, (C₆H₅S)₂CH₂, (C₆H₅CH₂S)₂CH₂, (n-C₁₂H₂₅S)₂CH₂, (C₃H₇S)₂C(H)CH₃, (C₃H₇S)₂C(H)C₆H₅, (C₃H₇S)₂C(CH₃)C₆H₅, (C₃H₇S)₂C(H)C₁₀H₉. .

     

Acid-base properties of supported vanadium oxide catalyst

Reduction of V₂O₅/Al₂O₃ and V₂O₅/silica-alumina produced Lewis acid sites which could strongly adsorb CO (heat of adsorption: 90 kJ/mol). Such strong acid sites were not formed in the cases of V₂O₅/SiO₂ and V₂O₅/MgO. V₂O₅ loaded on Al₂O₃ interacted with the basic sites of alumina but not with the acidic sites, while the V₂O₅ on silica-alumina interacted with the acidic sites of the silica-alumina and decreased its acidity.

---

V₂O₅/Al₂O₃ V₂O₅/SiO₂–Al₂O₃ , CO ( 90 /). V₂O₅/SiO₂ V₂O₅/MgO . V₂O₅, Al₂O₃, , , V₂O₅ SiO₂–Al₂O₃ - .

     

Plutonium removal by ion exchange chromatography

A study of Pu recovery at trace level from U solutions by ion exchange technique is presented. Plutonium retention >99.5% onto strong anionic resin, AG-X8, from nitric acid solutions and a 92% recovery using 0.4M HNO₃ at 60°C as eluent, were obtained. Uranium interference in Pu sorption from mixed U/Pu nitrate solutions with low U/Pu ratio (25) was not verified. However, for high U/Pu ratio solutions (10000), uranium interference in Pu retention on the resin, decreases to 59%. Selecting the loading conditions and using AG-X4 resin, 99% Pu retention was achieved. The Pu product is still contaminated with U and another purification cycle is recomended. A scheme for U/Pu first cycle separation is proposed.     

Thermische Zersetzung des Lithiumhexacyanoferrats(III)

Zusammenfassung Die thermische Zersetzung von Lithiumhexacyanoferrat (III) in Luft führt in drei Temperaturbereichen, d.h. zwischen 250 und 400°, 500 und 650° und 925 und 1000° zur Bildung ferromagnetischer Produkte. Durch Röntgendiffraktionsuntersuchung und magnetische Messungen wurde bewiesen, daß im ersten Temperaturbereich-Fe₂O₃ die für die ferromagnetischen Eigenschaften der Zersetzungsprodukte verantwortliche Phase ist, während in den anderen Bereichen diese Eigenschaften durch Lithiumferrit der Formel Li_0.5Fe_2.5O₄ verursacht werden.

---

The thermal decomposition of lithium hexacyanoferrate (III) in air leads to the formation of ferromagnetic products in three temperature ranges, namely 250–400°, 500–650° and 925–1000°. By X-ray diffraction studies and magnetic measurements it has been proved that in the first temperature region-Fe₂O₃ is the phase responsible for the ferromagnetic properties of the decomposition products, whereas in the other regions these properties are due to the presence of the lithium ferrite Li_0.5Fe_2.5O₄.

---

Résumé La décomposition thermique du ferricyanure de lithium dans l'air conduit à des produits ferromagnétiques dans trois intervalles de température: 250–400°, 500–650° et 925–1000°. Par diffraction des rayons X et mesures magnétiques, on montre que lors de la première étape de décomposition c'est l'oxyde-Fe₂O₃ qui est responsable des propriétés ferromagnétiques des produits de décomposition, tandis que pour les deux autres étapes, le ferromagnétisme est dû à la présence de ferrite de lithium de formule Li_0.5Fe_2.5O₄.

---

-()- : 250–400°, 500–650° 925–1000°. - , , , , -Fe₂O₃. Li_0.5Fe_2.5O₄.

     

Studies on double malonates. III. Thermal decomposition of sodium lanthanide malonates,Na5Ln(C3H2O4)4.7.5H2O,where Ln=Gd,Tb or Ho

The double malonates of gadolinium, terbium and holmium with sodium, of the type Na₅Ln(C₃H₂O₄)₄.7.5H₂O, have been studied by means of thermal analysis. A mechanism of thermal dehydration and decomposition has been proposed on the basis of the results obtained.

---

Zusammenfassung Doppelmalonate von Gadolinium, Terbium und Holmium mit Natrium des Typs Na₅Ln(C₃H₂O₄)₄.7,5 H₂O wurden mittels thermischer Analyse untersucht. Für die thermische Dehydratisierung und Zersetzung wird ein auf den erhaltenen Ergebnissen basierender Mechanismus vorgeschlagen.

---

, Na₅Ln(C₃H₂O₄)₄.7.5H₂O. .

---

---

Part II. Communicated     

A rapid separation of Sr from Ca by solvent extraction with dicarbollides in the presence of EDTA and polyethylene glycols

A typical composition of the solvent extraction system suitable for a rapid separation (3 min shaking) of Ca and Sr (separation factors 5000) in both tracer and macroconcentrations involves: organic phase–0.11M Li-dicarbollide and 1.65% Slovafol 909 in a mixture of 40% vol. CCl₄ and 60% nitrobenzene; aqueous phase–0.15M EDTA, 0.1M (H, Li)Ac (acetate buffer), pH5.2. Replacing Slovafol 909 (suitable for the preconcentration of RdSr) by polyethylene glycol 400 enhances the distribution ratioD _Sr by a factor of 7 and by a factor of 2. Using Na salts instead of Li ones IowersD _Sr by a factor of 100 and does not affect the value. When separating macroamounts of Ca from Sr traces, care must be exercised to ensure the desired pH value and free EDTA concentration.     

Effect of heating rate on the thermal decomposition of lead dioxide

Experimental data are presented on the kinetics and mechanism of PbO₂ decomposition at heating rates varying from 0 to 2.5 · 10³ °/sec. The studies were carried out with a time-of-flight mass spectrometer MSKH-4, a Paulik-Paulik-Erdey derivatograph and an X-ray diffractometer DRON-0.5At low heating rates (0 to 0.2 °/s) oxygen is evolved in four stages: PbO₂ PbO_1.56 PbO_1.44 PbO. At extremely high heating rates (2 · 10²–2.5 · 10³ °/s) the number of stages is reduced to two: PbO₂ PbO_1.4 PbO. An attempt is made to connect the observed change in the decomposition mechanism of PbO₂ with the crystal structure formation of the lead oxides.

---

Zusammenfassung Versuchsergebnisse bezüglich der Kinetik und des Mechanismus der Zersetzung von PbO₂ bei Aufheizgeschwindigkeiten zwischen 0 und 2.5 · 10³°/s werden mitgeteilt. Die Untersuchungen wurden mittels eines time-of-flight Massenspektrometers MSKH-4, eines Derivatographen des Typs Paulik-Paulik-Erdey und eines Röntgendiffraktometers DRON-0.5 durchgeführt.Bei niedrigen Aufheizgeschwindigkeiten (0 bis 0.2 °/sec) wird Sauerstoff in vier Stufen entwickelt: PbO₂ PbO_1.56 PbO_1.44 PbO. Bei extrem hohen Aufheizgeschwindigkeiten (2 · 10² – 2.5 · 10³°/s) wird die Zahl der Stufen auf zwei herabgesetzt: PbO₂ PbO_1.4 PbO. Es wird versucht die beobachtete Ánderung in dem Zersetzungsmechanismus von PbO₂ mit der Kristallstrukturbildung der Bleioxide in Verbindung zu bringen.

---

Résumé On présente des résultats expérimentaux concernant la cinétique et le mécanisme de la décomposition de PbO₂ pour des vitesses de chauffage allant de 0 à 2.5 · 10³°/s. Les études ont été effectuées à l'aide d'un spectromètre de masse du type MSKH-4, d'un Dérivatograph du type Paulik-Paulik-Erdey et d'un diffractomètre des rayons X du type DRON-0,5.Aux faibles vitesses de chauffage (0 à 0.2°/s) l'oxygène se dégage en quatre étapes: PbO₂ PbO_1.56 PbO_1.44 PbO. Aux vitesses de chauffage très élevées (2 · 10² à 2.5 · 10³°/s) le nombre des étapes se réduit à deux: PbO₂ PbO_1.4 PbO. On essaye de relier le changement observé dans le mécanisme de décomposition de PbO₂à la structure cristalline des oxydes de plomb.

---

PbO₂ 2.5 · 10³°/c. — — MCX — 4, — — — 0.5. (0–0.2°/c) : PbO₂ PbO_1.56. PbO_1.44 PbO. (2 · 10²–2.5 · 10³°/c) : PbO₂ PbO_1.4 PbO. PbO₂ .

     

Ligand exchange between bis-acetylacetonato cobalt(II) and organotin compounds SnR2Cl2 (R=Ph, Et), II. Mechanism of ligand exchange between acetylacetonate complexes of Co(II)

Ligand exchange between the compounds Co(AA)₂Py₂ and Co(AA)Clpy_x (x=1 or 3) formed in the, system, CO(AA)₂–SnR₂Cl₂(R=Ph, Et) in chloroform with pyridine has been established to be catalyzed by SnR₂Cl₂. An interpretation of the catalytic action of SnR₂Cl₂ is suggested.

---

, Co(AA₂py₂ Co(AA)Clpy_x (x=1 3) (Co(AA)₂–SnR₂Cl₂ (R=Ph, Et) , SnR₂Cl₂. SnR₂Cl₂.

     

Role of Water on Fast Proton Conduction in Sol-Gel Glasses

Fast proton-conducting P2O5-ZrO2-SiO2 glasses were prepared by sol-gel processing of metal alkoxides. Glasses heated to 150 to 400°C exhibited room temperature conductivities of 10–4 S/cm, larger by 2 order of magnitude than that of as-prepared gel, 3 × 10–7 S/cm at 30°C. The conductivity increased quadratically with the increasing product of proton and molecular water concentration. These high conductivities were regarded as fast proton transfer accelerated by molecular water bonded with the hydroxyl groups.     

Insertion of 3d- and 4f-Elements into Silver Iodide

The interaction of manganese and some 4f-metals (M) with silver iodide is studied. The samples are obtained by sputtering M onto the surface of polycrystalline AgI films (0.2 m, 300 K) in a vacuum. Optical absorption in the samples is interpreted as the insertion of M ions into AgI with the formation of dopants AgI:M. A new phase with an optical bandgap of 3.7 eV emerges in the samples with elevated concentrations of La, Ce, Pr, Nd, Sm, or Dy (n _M/n _Ag 0.1). X-ray diffraction patterns for such samples with Sm correspond to structures with large interfacial distances, for example, 0.99, 0.87, 0.76, and 0.67 nm. In air, AgI forms in the samples with a new phase; this process is hindered by the sputtered protective coatings. According to optical absorption data, X-ray diffraction, and local microanalysis the Mn insertion into AgI is followed by the formation of a new phase (2Ag:Mn:4I), which may belong with solid electrolytes Ag₂MI₄, where nonmagnetic M are known (Zn, Cd, Sn, Hg, Pb).     

Comparative study of measured and critically evaluated resonance integral to thermal cross-section ratios. Part II

The present paper deals with the experimental determination and the critical evaluation of Q_o, the ratio of the resonance integral (I_o) to the 2200 m.s^–1 cross-section (_o) for 57 analytically interesting (n, ) reactions, including a revision and updating of formerly published results for 13 isotopes. Full account is given for deviations from the ideal epithermal neutron flux distribution. The Budapest-Gent cooperative determinations, yielding parallel but independent results, lead to recommended Q_o-values with an average uncertainty as low as 3%. Finally, with the aid of independently evaluated or measured _o-data, a list of recommended I_o-values is given.