Submillimeter measurements of N2 and air broadening of hypochlorous acid

The pressure induced broadening of a several pure rotational transitions of hypochlorous acid, HOCl, have been measured as a function of temperature. This set of rotational transitions is the dominant feature of the submillimeter spectrum in the range where several remote sensing instruments currently operate. Additional features throughout the submillimeter spectrum have been recorded at the full-resolution of the room temperature Doppler linewidth using multiplier chains in the 110- wavelengths.     

The static and dynamic properties of PuCoGa5 and NpCoGa5 investigated by neutron scattering experiments

Neutron scattering results on single crystals shed light on the static and dynamic properties of the superconductor () PuCoGa₅ and its isostructural but antiferromagnetic () homologue NpCoGa₅. By polarized neutron diffraction the magnetization density in the paramagnetic state of both compounds has been inferred. The microscopic magnetization of NpCoGa₅ is consistent with the orbital and spin components of a localized Np³⁺ magnetic moment. In the case of PuCoGa₅ the microscopic magnetization is small, temperature-independent and cannot be described as a localized Pu³⁺ magnetic moment. For NpCoGa₅ a dynamic magnetic signal has been observed by three-axis spectroscopy in the antiferromagnetically ordered state. The magnetic signal is strongest at the antiferromagnetic zone center and an energy transfer of about 5 meV. Magnetic fluctuations persist at this position in the paramagnetic state. The dynamic response is similar to the dynamic response observed in other actinide intermetallic compounds. This supports the possibility that magnetic fluctuations could also be present in the paramagnetic superconductor PuCoGa₅.     

Near-infrared diode laser spectroscopy of the HCSi radical

The , , and band spectra of HCSi radical were investigated by means of near-infrared diode laser spectroscopy to determine precise molecular constants for the and states. The detailed analysis of the rotationally resolved band spectra, studied for the first time in the present investigation, leads to the precise determination of molecular constants for the state associated with the Renner-Teller interaction. We obtained −0.15126663(53) and 495.00698(30) cm⁻¹ as the Renner-Teller parameter ε and the bending vibrational frequency ω₂, respectively. Based on the molecular constants for the and states, the rotational levels of the state were analyzed to obtain molecular constants and information on upper state perturbations. Using the available spectroscopic data, valence force fields for both the and states were estimated to aid in understanding the vibrational energy levels of the HCSi radical.     

High pressure structural studies on SrRuO3

We have performed room temperature high pressure structural studies on the ferromagnetic perovskite SrRuO₃ to 34 GPa. We have also used three different pressure media (silicone fluid, 4:1 methanol:ethanol and argon) to test for possible effects of pressure media on compression data. The orthorhombic perovskite structure is stable to the highest pressure, and the data can be fit with a bulk modulus of with a pressure derivative of for all of the pressure media. We have also examined the high pressure behavior of the RuO₆ octahedra using a model that assumes the octahedra are not distorted. Various tilt angles around the ideal cubic perovskite axes are found and can be used to estimate the Ru-O-Ru bond angle that is known to be directly related to the ferromagnetic Curie temperature. For all pressure media, there appears to be a minimum in the Ru-O-Ru bond angle around 15 GPa. Implications for the observed high pressure magnetic behavior of SrRuO₃ will be discussed.     

Fe monolayers on InAs(0 0 1): An in situ study of surface, interface and volume magnetic anisotropy

The magnetic anisotropy of epitaxial Fe films with thicknesses in the range of 2-142 monolayers (ML) grown on {4×2} reconstructed InAs(0 0 1) was investigated by in situ ferromagnetic resonance. The easy magnetization direction was found to be parallel to the -direction for Fe films below 4 ML, while it rotates by 45^° toward the -direction. It is observed that both surface-interface and volume contribution to the perpendicular anisotropy favor an easy axis perpendicular to the film plane. The cubic surface-interface anisotropy is relatively large with easy axes along -directions in contrast to the volume contribution which favors easy axes along the -directions. The volume contribution is found to be larger than the Fe bulk cubic anisotropy. A thickness independent uniaxial anisotropy has been found in films with a thickness of 2 up to 142 ML.     

Molecular beam epitaxy of superconducting Pr2CuO4 films

Recent reports on superconductivity in parent compounds [RE = Pr, Nd, Sm, Eu, Gd] prepared by metal-organic decomposition (MOD) shed new light on the electronic and magnetic phase diagram of electron-doped cuprates. A thorough reduction process is the key to inducing superconductivity in square-planar coordinated cuprates. In this work, Pr₂CuO₄ films were grown epitaxially by molecular beam epitaxy (MBE) on (001)SrTiO₃, (110)GdScO₃ and (110)DyScO₃ substrates. A modified two-step reduction process is required in order to obtain single-phase superconducting samples. The optimized superconducting properties are , while the room-temperature resistivity is about . Hence, we show that even amorphous Pr₂CuO_y films deposited on (110)DyScO₃ become superconducting after the application of the two-step annealing process. These results indicate that superconductivity is induced to Pr₂CuO₄ by systematic optimization of the reduction conditions, irrespective of the synthesis route.     

Prospects of reactor neutrino experiments

Since the energy of a reactor neutrino is a few MeV, all , and oscillations are accessible by reactor neutrino experiments. KamLAND observed the oscillation and currently Double Chooz, RENO and Dayabay experiments are under construction aiming to detect oscillation. There are still good prospects for future reactor neutrino experiments after them. For example, there is room to further improve sin²2θ₁₃ accuracy at a baseline of ∼1.5 km, a very precise sin²2θ₁₂ measurement and the determination of mass hierarchy may be possible at a baseline ∼50 km, and if KamLAND is enlarged to the SuperKamiokande size, better measurement of and sin²2θ₁₂ will be anticipated. It is important to take into account such possibilities when planning future neutrino program after θ₁₃ is measured by current experiments.     

Specific heat of EuIn2P2 at high magnetic fields

We have carried out specific heat measurements on EuIn₂P₂ at high magnetic fields perpendicular to the c-axis in the hexagonal crystal structure in order to understand its thermal properties. The temperature dependence of the specific heat exhibits a clear λ-type anomaly due to a magnetic transition at , indicating that the magnetic transition is of second-order. The λ-type anomaly becomes markedly broader with increasing the magnetic field. This remarkable field-dependence is consistent with the results of previous magnetization measurements which suggest that Eu²⁺ magnetic moments align ferromagnetically perpendicular to the c-axis below T_C. In addition, a hump in the specific heat is observed around 7 K, which can be ascribed to the Zeeman splitting of the Eu²⁺ multiplet by internal magnetic fields.     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

Etching and forward transfer of fused silica in solid-phase by femtosecond laser-induced solid etching (LISE)

We present a femtosecond laser-based technique for etching and forward transfer of bulk transparent materials in solid-phase. Femtosecond laser pulses with were focused through a fused silica block onto an absorbing thin film of Cr. A constraining Si wafer was pressed into tight contact with the Cr film to prevent lift-off of the film. A combination of the high temperature and pressure of the Cr, and compressive stress from the Si, resulted in etching of smooth features from the fused silica by cracking. Unlike in conventional ablative or chemical etching, the silica was removed from the bulk as single solid-phase pieces which could be collected on the Si. Using this so-called laser-induced solid etching (LISE) technique, 1-2 m deep pits and channels have been produced in the silica surface, and corresponding dots and lines deposited on the Si. The threshold fluence for etching was found to be with duration pulses. The morphology of the etched features are investigated as functions of fluence and exposure to multiple pulses.     

Thickness and temperature dependence of the dynamic magnetic behavior in disordered FePt films

We present in this work an investigation of the magnetic behavior of FePt films as a function of film thickness and thermal treatment. The films have been sputter-deposited on oxidized Si (1 0 0) crystals and are ferromagnetic at room temperature. Using ferromagnetic resonance techniques at 9.5 GHz we have studied a series of four films with a thickness in the range . The resonance spectra of these films were measured at and also above room temperature. The high temperature measurements produce irreversible changes in the samples which depend on the maximum temperature reached during the experiment. For relatively low measuring temperatures () the magnetic properties are generally improved, probably due to the release of stress formed during film fabrication. For larger temperatures () the absorption linewidth gradually broadens and the line could be hardly observed at room temperature if the measuring temperature exceeded . This behavior is due to the partial transformation of the metastable FCC phase to the ordered L1₀ high anisotropy phase. These data are consistent with the results found in samples annealed outside the resonant cavity.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

Potential energy curve of Be2 in its ground electronic state

The potential energy curve of Be₂ in its ground electronic state is constructed by morphing accurate MR-CI ab initio potentials from the literature to available experimental ro-vibrational data within the framework of the reduced potential curve (RPC) approach of Jen? and Plíva [Adv. At. Mol. Phys. 19 (1983) 265-307]. The resulting potential energy curves are in close harmony with experiment allowing thus for reliable prediction of the so-far experimentally unprobed part of the molecular potential energy function.     

Fluorescence of the C60-pyridine system in electrochemistry reduction processes

Three groups of strong fluorescence peaks of C₆₀, centered at 440, 575 and 700 nm, are observed in the supersaturated C₆₀-pyridine solution, and the onsite fluorescence spectra of this C₆₀-pyridine system in the first and second electrochemistry reduction processes are obtained for the first time. The results indicate that the fluorescence peaks centered at 440 nm originate from C₆₀ molecules dissolved in supersaturated C₆₀-pyridine solution, while fluorescence bands centered at 575 and 700 nm are emitted from undissolved C₆₀. It is also proved that a strong charge transfer interaction, which is significant for the symmetry increase of , as well as the formation of a transmission channel of energy, occurs between and pyridine, as is supported by surface-enhanced Raman scattering (SERS) spectra as well.     

Terahertz spectroscopy of oxygen, O2, in its Σg and Δ electronic states : THz Spectroscopy of O2

High precision rotational spectra of isotopic oxygen O₂ (with or ) in its electronic ground state have been measured in selected frequency regions between 0.4 and 2.0 THz. The main isotopic species, , was also investigated in its first excited electronic state . The new data, analyzed together with previous measurements, yielded improved spectroscopic parameters.