Thermodynamic characteristics of the protolytic equilibria of tetramethylenediamine-N,N,N′,N′-tetraacetic acid

The stepwise dissociation constants of tetramethylenediamine-N,N,N′,N′-tetraacetic acid (H₄L) are determined by means of potentiometry at 298.15 K and ionic strength values of 0.1, 0.5, and 1.0 (KNO₃). The heat effects of the dissociation of the betaine groups of the complexone are measured by direct calorimetry. The standard thermodynamic characteristics of the protolytic equilibria of H₄L are calculated via combined use of the results from thermochemical and potentiometric studies performed under identical experimental conditions. Our results are compared with the corresponding data on relative compounds.     

New method of the synthesis of N,N′-diphenyl-1,4-benzoquinone diimine

A method of synthesis of N,N′-diphenyl-1,4-benzoquinone diimine by oxidation of N,N′-diphenyl-1,4-phenylenediamine with potassium permanganate in acetone at room temperature was developed. The procedure of isolation and exhaustive purification of the product includes recrystallization from a number of solvents and elimination of impurities on a short column packed with silica gel.     

Physicochemical studies of the structure of N,N′-dinitrourea and its salts

The properties and behavior of dinitrourea and its potassium and dipotassium salts in different solvents have been studied by IR and UV spectroscopy. In different media, dinitrourea can exist in several tautomeric forms. An XRD study of the potassium and dipotassium salts of dinitrourea revealed a tendency toward equalization of the bond lengths of the C-N⁻-NO₂ fragments compared with those of C-NH-NO₂, which agrees with the results of quantum-chemical calculations.     

Calorimetric study of the reaction between formic acid and N,N,N′,N′-tetramethylethylenediamine from the aspect of thermal energy storage

The attack by formic acid on the nitrogen electron pairs of N,N,N,N-tetramethylethylenediamine leads to the stoichiometric salt or to many other complexes with different molar fractions. Physical and thermodynamic parameters of two adducts, obtained by calorimetric study, are discussed in terms of their use as potential phase change materials in thermal energy storage because of their large heat of fusion between 288 and 333 K.

---

Zusammenfassung Bei der Einwirkung von Ameisensäure auf die Elektronenpaare von N,N,N,N-Tetramethylethylendiamin entsteht ein stöchiometrisches Salz oder mehrere andere Komplexe mit unterschiedlichem Molenbruch. Es werden physikalische und thermodynamische Parameter zweier bei der kalorimetrischen Untersuchung erhaltenen Addukte hinsichtlich ihrer Verwendung als potentielle Phasenwechselsubstanzen bei der thermischen Energiespeicherung diskutiert, da sie im Bereich 288–333 K eine große Schmelz-wärme besitzen.

     

The structure effect of N,N,N′,N′-alkylamide in the extraction of uranium and thorium

In this paper, nine N,N,N,N-tetraalkyldiamides have been synthesized and the extracting ability for uranium and thorium under different conditions has been studied. All results were compared with those obtained by using tributyl phosphate (TBP) under exactly the same conditions. The extracting ability of thorium and uranium for different N,N,N,N-tetraalkyldiamides is discussed.     

Elucidating the N−N and C−N Bond-breaking Mechanism in the Photoinduced Formation of Nitrile Imine

In this study, we revealed the significance of chemical bonding for the photochemically induced mechanism of 2-phenyl tetrazole derivatives generating nitrile imines. The correlated electron localization function shows that the formation of imine nitrile involves two key bond events: (i) the heterolytic C−N breakage taking place in the T₁ state and (ii) the homolytic N−N rupture occurring in the T₂ excited state. In particular, a cation-radical specie results from the C−N cleavage, whereas the N−N rupture creates a biradical resonant form of imine nitrile. Additionally, we noticed that the substantial pair delocalization of the C−C-N bonded structure could play a significant role in the conversion of the biradical imine nitrile into both the propargylic and allenic forms via the T₁→S₀ deactivation.     

Biosynthesis of the N–N-Bond-Containing Compound l-Alanosine

The formation of a N−N bond is a unique biochemical transformation, and nature employs diverse biosynthetic strategies to activate nitrogen for bond formation. Among molecules that contain a N−N bond, biosynthetic routes to diazeniumdiolates remain enigmatic. We here report the biosynthetic pathway for the diazeniumdiolate-containing amino acid l -alanosine. Our work reveals that the two nitrogen atoms in the diazeniumdiolate of l -alanosine arise from glutamic acid and aspartic acid, and we clarify the early steps of the biosynthetic pathway by using both in vitro and in vivo approaches. Our work demonstrates a peptidyl-carrier-protein-based mechanism for activation of the precursor l -diaminopropionate, and we also show that nitric oxide can participate in non-enzymatic diazeniumdiolate formation. Furthermore, we demonstrate that the gene alnA, which encodes a fusion protein with an N-terminal cupin domain and a C-terminal AraC-like DNA-binding domain, is required for alanosine biosynthesis.     

Thermodynamics of the Extraction of U(VI) by N,N′-Didecanoylpiperazine

A novel extractant, N, N-didecanoylpiperazine (DDPEZ), was synthesized for the first time. The extraction of U(VI) by DDPEZ from aqueous nitric acid media in carbon tetrachloride has been studied. The dependence of extraction distribution ratio on concentration of aqueous nitric acid, extractant, salting-out agent and temperature was investigated and the enthalpy of the extraction was calculated.     

Synthesis of guanidines via the I2 mediated desulfurization of N,N′-di-Boc-thiourea

The I₂ mediated desulfurization of N,N′-di-Boc-thiourea was developed. Various primary amines, including sterically and electronically deactivated primary amines, were transformed into the corresponding bis-Boc protected guanidines under mild conditions.     

The effect of structure and phase transformation on the mechanical properties of Re₂N and the stability of Mn₂N

First‐principles calculations were carried out on recently synthesized Re₂ and Re₃ as well as hypothetical Tc and Mn nitrides. It is found that structure and covalent bonds play an important role in determining mechanical properties. Under a large strain along (0001)〈101 0〉direction, Re₂N undergoes a phase transformation with a slight increase in ideal shear strength. On the other hand, it is transformed into a phase with weaker mechanical properties, if the strain is along Re₂〈1 21 0〉 direction. Mn₂N can be synthesized under moderate conditions due to its more negative formation energy. Re₂N, Re₃N, and Mn₂N show structure‐related mechanical property under larger strains to ReB₂ but exhibit much lower ideal strengths, which is attributed to the larger ionicity of cation–anion bond. Three‐dimensional framework of strong covalent bonds is thus highly recommended to design superhard materials. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Eco-friendly N–N coupling of aminofuroxans into azofuroxans under the action of electrogenerated hypohalites

1. Download high-res image (110KB)
2. Download full-size image

     

Calorimetric study of the solubilization of ethylenediamine,N,N-dimethylaminoethylamine and N,N,N′,N′-tetramethylethylenediamine by reversed AOT micelles

Distribution constants and standard enthalpies of transfer of ethylenediamine (en), N,N-dimethylaminoethylamine (dmen) and N,N,N,N-tetramethylethylenediamine (tmen) partitioned between n-heptane and water containing reversed sodium bis(2-ethylhexyl) sulfosuccinate (AOT) micelles as a function of the molar concentration ratio R (R=[water]/[AOT]) were evaluated by a calorimetric method. The results show that en, dmen and tmen molecules, solubilized in the reversed micelles, are distributed between the micellar aqueous core and the micellar palisade layer. An analysis of the thermodynamic parameters of the partition process demonstrates the peculiar solvent properties of the water containing reversed AOT micelles.     

Experimental and theoretical study of the dissociation enthalpy of the N–O bond on 2-hydroxypyridine N-oxide: theoretical analysis of the energetics of the N–O bond for hydroxypyrydine N-oxide isomers

The standard (p^∘=0.1 MPa) molar enthalpy of formation of crystalline 2-hydroxypyridine N-oxide was measured, at T=298.15 K, by static bomb calorimetry and the standard molar enthalpy of sublimation, at T=298.15 K, was obtained using Calvet microcalorimetry. These values were used to derive the standard molar enthalpy of formation of 2-hydroxypyridine N-oxide in gaseous phase, and to evaluate the dissociation enthalpy of the N–O bond. Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional have been performed for the three isomers of hydroxypyridine N-oxide in order to confirm the experimental trend for the dissociation enthalpy of the (N–O) bond.     

FT-IR study of the conformation and proton acceptor ability of N-tertiobutoxycarbonylsarcosine N′-methylamide and N-tertiobutoxycarbonylsarcosine N′,N′-dimethylacetamide

Two model dipeptides, N-tertiobutoxycarbonylsarcosine N′-methylamide (BSMA) and N-tertiobutoxycarbonylsarcosine N′,N′-dimethylamide (BSDA) are investigated by FT-IR spectrometry. The conformation of BSMA is very sensitive to the environment. In solvents of weak polarity (carbon tetrachloride, cyclohexane), BSMA accomodates the extended and seven-membered ring conformation, but in 1,2-dichloroethane, the C₇ conformers are greatly destabilized. Hydrogen bonding between BSMA or BSDA and phenols is studied in carbon tetrachloride. The thermodynamic data (equilibrium constants and enthalpies of complex formation) show that the BSMA complexes are stronger than the BSDA complexes. The spectroscopic data suggest that for BSMA, complex formation occurs at the O atom of the amide function while for BSDA about 50% of the complexes are formed on the O atom of the urethane group. The differences between the two sarcosine dipeptides are discussed in terms of cooperative and steric effects. It can be concluded that the global polarity of the medium exerts a greater influence on the conformation of the C₇ dipeptides than the specific interactions taking place on a given site of the molecule.     

Crystal Structure of the Addition Compound of N,N′-Bi(2-pyridylmethyl)-Oxamide and the Complex of Copper with 1,10-Phenanthroline

ＩｎｔｒｏｄｕｃｔｉｏｎＨｅｔｅｒｏｂｉｎｕｃｌｅａｒｃｏｍｐｌｅｘｅｓａｒｅｅｒｙｖｅｒｙｉｍｐｏｒｔａｎｔｉｎａｎａｔｅｍｐｔｔｏｍｉｍｉｃｔｈｅｓｔｒｕｃｔｕｒａｌａｎｄｆｕｎｃｔｉｏｎａｌｐｒｏｐｅｒｔｉｅｓｏｆｂｉｏｌｏｇｉｃａｌｓｙｓｔｅ...     

Structure of intermediates in the Hantzsch reaction of phenylchloropyruvic acid derivatives with N,N′-diphenylthiourea

The intermediates in the Hantzsch reaction of the methyl ester and diethylamide of phenylchloropyruvic acid with N,N-diphenylthiourea are derivatives of 2-phenylimino-3,5-diphenyl-4-hydroxythiazoline-4-carboxylic acid. They exist as an equilibrium mixture of two diastereomers in solution.A. E. Arbuzov Institute of Organic and Physical Chemistry of the Kazan Scientific Center, Russian Academy of Sciences, Kazan' 420088; Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 975–980, July, 1999.     

Thermodynamic modeling of the deposition of Si—C—N films from the gas phase during the decomposition of organosilicon compounds

Thermodynamic modeling of the process of chemical vapor deposition (CVD) of SiC_x and SiC_xN_y films from the gas phase was carried out using organosilicon compounds (EtN(SiMe₃)₂, PhN(SiMe₃)₂, and PhSiMe₃) at reactor pressures of 0.01 and 10 Torr in the temperature range of 500–1200 K. It was established that regions of existence of two phase complexes, namely, SiC + Si₃N₄ + C and SiC + C, were present on the CVD diagrams calculated for the EtN(SiMe₃)₂—He and PhN(SiMe₃)₂—He systems. The CVD diagrams calculated for the EtN(SiMe₃)₂—NH₃, PhN(SiMe₃)₂—NH₃, and PhSiMe₃—NH₃ systems have regions of existence of three phase complexes, namely, Si₃N₄ + C, SiC + Si₃N₄ + C, and SiC + C. The composition of the obtained silicon-containing films was calculated.     

Synthesis of Fully Protected N‐Arylglycosylamines and Factors Affecting the Configuration of C1‐Substituents of N‐Arylglycosylamines

Abstract

An efficient method was reported for preparation of N‐arylglycosylamines in aqueous THF under reflux in good yields. The factors affecting the configuration of C₁‐substituents of N‐aryglycosylamines was investigated, that is, the influence of solvents, substituents of aromatic amines, and protecting groups of monosaccharides on the ratio of α‐ and β‐N‐arylglycosylamines.