Spectroscopic and Crystallographic Characterization of the R3N+−C−H⋅⋅⋅X Interaction

As appreciation for nonclassical hydrogen bonds has progressively increased, so have efforts to characterize these interesting interactions. Whereas several kinds of C−H hydrogen bonds have been well-studied, much less is known about the R₃N⁺−C−H⋅⋅⋅X variety. Herein, we present crystallographic and spectroscopic evidence for the existence of these interactions, with special relevance to Selectfluor chemistry. Of particular note is the propensity for Lewis bases to engage in nonclassical hydrogen bonding over halogen bonding with the electrophilic F atom of Selectfluor. Further, the first examples of ¹H NMR experiments detailing R₃N⁺−C−H⋅⋅⋅X (X=O, N) hydrogen bonds are described.     

Halogen‐ and Hydrogen‐Bonded Salts and Co‐crystals Formed from 4‐Halo‐2,3,5,6‐tetrafluorophenol and Cyclic Secondary and Tertiary Amines: Orthogonal and Non‐orthogonal Halogen and Hydrogen Bonding,and Synthetic Analogues of Halogen‐Bonded Biological Systems

Co‐crystallisation of, in particular, 4‐iodotetrafluorophenol with a series of secondary and tertiary cyclic amines results in deprotonation of the phenol and formation of the corresponding ammonium phenate. Careful examination of the X‐ray single‐crystal structures shows that the phenate anion develops a C?O double bond and that the C?C bond lengths in the ring suggest a Meissenheimer‐like delocalisation. This delocalisation is supported by the geometry of the phenate anion optimised at the MP2(Full) level of theory within the aug‐cc‐pVDZ basis (aug‐cc‐pVDZ‐PP on I) and by natural bond orbital (NBO) analyses. With sp² hybridisation at the phenate oxygen atom, there is strong preference for the formation of two non‐covalent interactions with the oxygen sp² lone pairs and, in the case of secondary amines, this occurs through hydrogen bonding to the ammonium hydrogen atoms. However, where tertiary amines are concerned, there are insufficient hydrogen atoms available and so an electrophilic iodine atom from a neighbouring 4‐iodotetrafluorophenate group forms an I???O halogen bond to give the second interaction. However, in some co‐crystals with secondary amines, it is also found that in addition to the two hydrogen bonds forming with the phenate oxygen sp² lone pairs, there is an additional intermolecular I???O halogen bond in which the electrophilic iodine atom interacts with the C?O π‐system. All attempts to reproduce this behaviour with 4‐bromotetrafluorophenol were unsuccessful. These structural motifs are significant as they reproduce extremely well, in low‐molar‐mass synthetic systems, motifs found by Ho and co‐workers when examining halogen‐bonding interactions in biological systems. The analogy is cemented through the structures of co‐crystals of 1,4‐diiodotetrafluorobenzene with acetamide and with N‐methylbenzamide, which, as designed models, demonstrate the orthogonality of hydrogen and halogen bonding proposed in Ho’s biological study.     

Complementary,Cooperative Ditopic Halogen Bonding and Electron Donor-Acceptor π-π Complexation in the Formation of Cocrystals

This study expands and combines concepts from two of our earlier studies. One study reported the complementary halogen bonding and π-π charge transfer complexation observed between isomeric electron rich 4-N,N-dimethylaminophenylethynylpyridines and the electron poor halogen bond donor, 1-(3,5-dinitrophenylethynyl)-2,3,5,6-tetrafluoro-4-iodobenzene while the second study elaborated the ditopic halogen bonding of activated pyrimidines. Leveraging our understanding on the combination of these non-covalent interactions, we describe cocrystallization featuring ditopic halogen bonding and π-stacking. Specifically, red cocrystals are formed between the ditopic electron poor halogen bond donor 1-(3,5-dinitrophenylethynyl)-2,4,6-triflouro-3,5-diiodobenzene and each of electron rich pyrimidines 2- and 5-(4-N,N-dimethyl-aminophenylethynyl)pyrimidine. The X-ray single crystal structures of these cocrystals are described in terms of halogen bonding and electron donor-acceptor π-complexation. Computations confirm that the donor-acceptor π-stacking interactions are consistently stronger than the halogen bonding interactions and that there is cooperativity between π-stacking and halogen bonding in the crystals.     

Halogen Bonding Between Anions: Association of Anion Radicals of Tetraiodo-p-benzoquinone with Iodide Anions

Halogen bonding between two negatively charged species, tetraiodo-p-benzoquinone anion radicals (I₄Q^−.) and iodide anions, was observed and characterized for the first time. X-ray structural and EPR/UV–Vis spectral studies revealed that the anion–anion bonding led to the formation of crystals comprising 2D layers of I₄Q^−. anion radicals linked by iodides and separated by Et₄N⁺ counter-ions. Computational analysis suggested that the seemingly antielectrostatic halogen bonds in these systems were formed via a combination of several factors. First, an attenuation of the interionic repulsion by the solvent facilitated close approach of the anions leading to their mutual polarization. This resulted in the appearance of positively charged areas (σ-holes) on the surface of the iodine substituents in I₄Q^−. responsible for the attractive interaction. Finally, the solid-state associations were also stabilized by multicenter (4:4) halogen bonding between I₄Q^−. and iodide.     

Design of two series of 1:1 cocrystals involving 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine and carboxylic acids

Two series of a total of ten cocrystals involving 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine with various carboxylic acids have been prepared and characterized by single‐crystal X‐ray diffraction. The pyrimidine unit used for the cocrystals offers two ring N atoms (positions N1 and N3) as proton‐accepting sites. Depending upon the site of protonation, two types of cations are possible [Rajam et al. (2017). Acta Cryst. C 73 , 862–868]. In a parallel arrangement, two series of cocrystals are possible depending upon the hydrogen bonding of the carboxyl group with position N1 or N3. In one series of cocrystals, i.e. 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–3‐bromothiophene‐2‐carboxylic acid (1/1), 1 , 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–5‐chlorothiophene‐2‐carboxylic acid (1/1), 2 , 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–2,4‐dichlorobenzoic acid (1/1), 3 , and 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–2‐aminobenzoic acid (1/1), 4 , the carboxyl hydroxy group (–OH) is hydrogen bonded to position N1 (O—H…N1) of the corresponding pyrimidine unit (single point supramolecular synthon). The inversion‐related stacked pyrimidines are doubly bridged by the carboxyl groups via N—H…O and O—H…N hydrogen bonds to form a large cage‐like tetrameric unit with an R₄²(20) graph‐set ring motif. These tetrameric units are further connected via base pairing through a pair of N—H…N hydrogen bonds, generating R₂²(8) motifs (supramolecular homosynthon). In the other series of cocrystals, i.e. 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–5‐methylthiophene‐2‐carboxylic acid (1/1), 5 , 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–benzoic acid (1/1), 6 , 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–2‐methylbenzoic acid (1/1), 7 , 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–3‐methylbenzoic acid (1/1), 8 , 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–4‐methylbenzoic acid (1/1), 9 , and 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–4‐aminobenzoic acid (1/1), 10 , the carboxyl group interacts with position N3 and the adjacent 4‐amino group of the corresponding pyrimidine ring via O—H…N and N—H…O hydrogen bonds to generate the robust R₂²(8) supramolecular heterosynthon. These heterosynthons are further connected by N—H…N hydrogen‐bond interactions in a linear fashion to form a chain‐like arrangement. In cocrystal 1 , a Br…Br halogen bond is present, in cocrystals 2 and 3 , Cl…Cl halogen bonds are present, and in cocrystals 5 , 6 and 7 , Cl…O halogen bonds are present. In all of the ten cocrystals, π–π stacking interactions are observed.     

Cocrystal Formation Precedes the Mechanochemically Acetate-Assisted C−H Activation with [Cp*RhCl2]2

This work reports the experimentally studied mechanochemical formation of rhodacycles by ball milling pyridine- and quinoline-derived substrates and [Cp*RhCl₂]₂ in the presence of NaOAc. Ex-situ analysis of the mechanochemical reactions using powder X-ray diffraction (PXRD), solid-state UV-vis spectroscopy and ATR-FTIR spectroscopy revealed the formation of unexpected cocrystals between the substrates and the rhodium dimer prior to the C−H activation step. This sequence of events differs from the generally accepted steps in solution in which cleavage of [Cp*RhCl₂]₂ is initiated by acetate ions. Additionally, the mechanochemical approach enabled the synthesis of the six-membered rhodacycle [Cp*Rh(2-benzilpyridine)Cl], a metal complex repeatedly reported as inaccessible in solution. Altogether, the results of this investigation clarify some of the fundamental aspects of mechanochemical cyclometallations.     

Thermal Expansion Properties and Mechanochemical Synthesis of Stoichiometric Cocrystals Containing Tetrabromobenzene as a Hydrogen- and Halogen-Bond Donor

The solution and mechanochemical synthesis of two cocrystals that differ in the stoichiometric ratio of the components (stoichiometric cocrystals) is reported. The components in the stoichiometric cocrystals interact through hydrogen or hydrogen/halogen bonds and differ in π-stacking arrangements. The difference in structure and noncovalent interactions affords dramatically different thermal expansion behaviors in the two cocrystals. At certain molar ratios, the cocrystals are obtained concomitantly; however, by varying the ratios, a single stoichiometric cocrystal is achieved using mechanochemistry.     

Weak hydrogen and halogen bonding in 4‐[(2,2‐difluoroethoxy)methyl]pyridinium iodide and 4‐[(3‐chloro‐2,2,3,3‐tetrafluoropropoxy)methyl]pyridinium iodide

To enable a comparison between a C—H…X hydrogen bond and a halogen bond, the structures of two fluorous‐substituted pyridinium iodide salts have been determined. 4‐[(2,2‐Difluoroethoxy)methyl]pyridinium iodide, C₈H₁₀F₂NO⁺·I⁻, (1), has a –CH₂OCH₂CF₂H substituent at the para position of the pyridinium ring and 4‐[(3‐chloro‐2,2,3,3‐tetrafluoropropoxy)methyl]pyridinium iodide, C₉H₉ClF₄NO⁺·I⁻, (2), has a –CH₂OCH₂CF₂CF₂Cl substituent at the para position of the pyridinium ring. In salt (1), the iodide anion is involved in one N—H…I and three C—H…I hydrogen bonds, which, together with C—H…F hydrogen bonds, link the cations and anions into a three‐dimensional network. For salt (2), the iodide anion is involved in one N—H…I hydrogen bond, two C—H…I hydrogen bonds and one C—Cl…I halogen bond; additional C—H…F and C—F…F interactions link the cations and anions into a three‐dimensional arrangement.     

A Halogen‐Bonding Bis‐triazolium Rotaxane for Halide‐Selective Anion Recognition

A systematic study on the anion‐binding properties of acyclic halogen‐ and hydrogen‐bonding bis‐triazolium carbazole receptors is described. The halide‐binding potency of halogen‐bonding bis‐iodotriazolium carbazole receptors was found to be far superior to their hydrogen‐bonding bis‐triazolium‐based analogues. This led to the synthesis of a mixed halogen‐ and hydrogen‐bonding rotaxane host containing a bis‐iodotriazolium carbazole axle component. The rotaxane’s anion recognition properties, determined by ¹H NMR titration experiments in a competitive aqueous solvent mixture, demonstrated the preorganised halogen‐bonding interlocked host cavity to be halide‐selective, with a strong binding affinity for bromide.     

5-amino-2-methylpyridinium hydrogen fumarate: An XRD and NMR crystallography analysis

Single-crystal X-ray diffraction structures of the 5-amino-2-methylpyridinium hydrogen fumarate salt have been solved at 150 and 300 K (CCDC 1952142 and 1952143). A base–acid–base–acid ring is formed through pyridinium-carboxylate and amine-carboxylate hydrogen bonds that hold together chains formed from hydrogen-bonded hydrogen fumarate ions. ¹H and ¹³C chemical shifts as well as ¹⁴N shifts that additionally depend on the quadrupolar interaction are determined by experimental magic angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) and gauge-including projector-augmented wave (GIPAW) calculation. Two-dimensional homonuclear ¹H-¹H double-quantum (DQ) MAS and heteronuclear ¹H-¹³C and ¹⁴N-¹H spectra are presented. Only small differences of up to 0.1 and 0.6 ppm for ¹H and ¹³C are observed between GIPAW calculations starting with the two structures solved at 150 and 300 K (after geometry optimisation of atomic positions, but not unit cell parameters). A comparison of GIPAW-calculated ¹H chemical shifts for isolated molecules and the full crystal structures is indicative of hydrogen bonding strength.     

Halogen bonding in complexes of proteins and non-natural amino acids

In this work, we have analyzed the influence of halogen bonding to the stability of 44 complexes of proteins and non-natural amino acids. Fluorine- and chlorine-containing non-natural amino acids are more prevalent in the dataset, and an even larger number of contacts made by iodine-containing ligands are found. Only few halogen bonds with the hydroxyl oxygens and carboxylate side chains are found in the dataset. Halogen bonds with the nitrogen-containing side chains have higher occurrence than other acceptors. Backbone carbonyl oxygens and nitrogens are to a substantial extent involved in our dataset. We have observed a small percentage of interactions involving water as hydrogen bond donors. Additionally, most of the interacting residues comprising the interfaces also show a great degree of conservation. There is a clear interaction hot spot at distances of 3.5–3.7 Å and Θ₁ angles of 100–120°. There is also a cluster of contacts featuring short distances (2.6–2.9 Å) but only nearly optimal Θ₁ angles (140–160°). 51.3% of stabilizing residues are involved in building halogen bonds with the non-natural amino acids. We discovered three types of structural motifs significantly over-represented: beta-turn-ir, beta-turn-il and niche-4r. The halogen-bonding statistics of the dataset do not show any preference for α-helices (36%), β-sheets (36%), or turns/coils (28%) structures. Most of the amino acid residues that were involved in halogen bonds prefer to be in the solvent excluded environment (buried). Furthermore, we have shown that in amino acid–protein complexes halogen atoms can sometimes be involved in hydrogen bonding interactions with hydrogen bonding-donors. The results from this study might be used for the rational design of halogenated ligands as inhibitors and drugs, and in biomolecular engineering.     

Tuning the Halogen/Hydrogen Bond Competition: A Spectroscopic and Conceptual DFT Study of Some Model Complexes Involving CHF2I

Insight into the key factors driving the competition of halogen and hydrogen bonds is obtained by studying the affinity of the Lewis bases trimethylamine (TMA), dimethyl ether (DME), and methyl fluoride (MF) towards difluoroiodomethane (CHF₂I). Analysis of the infrared and Raman spectra of solutions in liquid krypton containing mixtures of TMA and CHF₂I and of DME and CHF₂I reveals that for these Lewis bases hydrogen and halogen‐bonded complexes appear simultaneously. In contrast, only a hydrogen‐bonded complex is formed for the mixtures of CHF₂I and MF. The complexation enthalpies for the C?H ??? Y hydrogen‐bonded complexes with TMA, DME, and MF are determined to be ?14.7(2), ?10.5(5) and ?5.1(6) kJ mol^?1, respectively. The values for the C?I ??? Y halogen‐bonded isomers are ?19.0(3) kJ mol^?1 for TMA and ?9.9(8) kJ mol^?1 for DME. Generalization of the observed trends suggests that, at least for the bases studied here, softer Lewis bases such as TMA favor halogen bonding, whereas harder bases such as MF show a substantial preference for hydrogen bonding.     

Engineering Crystals Using sp3-C Centred Tetrel Bonding Interactions

1,1,2,2-Tetracyanocyclopropane derivatives 1 and 2 were designed and synthesized to probe the utility of sp³-C centred tetrel bonding interactions in crystal engineering. The crystal packing of 1 and 2 and their 1,4-dioxane cocrystals is dominated by sp³-C(CN)₂⋅⋅⋅O interactions, has significant C⋅⋅⋅O van der Waals overlap (≤0.266 Å) and DFT calculations indicate interaction energies of up to −11.0 kcal mol⁻¹. A cocrystal of 2 with 1,4-thioxane reveals that the cyclopropane synthon prefers interacting with O over S. Computational analyses revealed that the electropositive C₂(CN)₄ pocket in 1 and 2 can be seen as a strongly directional ‘tetrel-bond donor’, similar to halogen bond or hydrogen bond donors. This disclosure is expected to have implications for the utility of such ‘tetrel bond donors’ in molecular disciplines such as crystal engineering, supramolecular chemistry, molecular recognition and medicinal chemistry.     

Halogen‐ and Hydrogen‐Bonding Catenanes for Halide‐Anion Recognition

Halogen‐bonding (XB) interactions were exploited in the solution‐phase assembly of anion‐templated pseudorotaxanes between an isophthalamide‐containing macrocycle and bromo‐ or iodo‐functionalised pyridinium threading components. ¹H NMR spectroscopic titration investigations demonstrated that such XB interpenetrated assemblies are more stable than analogous hydrogen bonding (HB) pseudorotaxanes. The stability of the anion‐templated halogen‐bonded pseudorotaxane architectures was exploited in the preparation of new halogen‐bonding interlocked catenane species through a Grubbs’ ring‐closing metathesis (RCM) clipping methodology. The catenanes’ anion recognition properties in the competitive CDCl₃/CD₃OD 1:1 solvent mixture revealed selectivity for the heavier halides iodide and bromide over chloride and acetate.     

Halogen Bonding Between Anions: Association of Anion Radicals of Tetraiodo‐p‐benzoquinone with Iodide Anions

Halogen bonding between two negatively charged species, tetraiodo‐p‐benzoquinone anion radicals (I₄Q^?.) and iodide anions, was observed and characterized for the first time. X‐ray structural and EPR/UV–Vis spectral studies revealed that the anion–anion bonding led to the formation of crystals comprising 2D layers of I₄Q^?. anion radicals linked by iodides and separated by Et₄N⁺ counter‐ions. Computational analysis suggested that the seemingly antielectrostatic halogen bonds in these systems were formed via a combination of several factors. First, an attenuation of the interionic repulsion by the solvent facilitated close approach of the anions leading to their mutual polarization. This resulted in the appearance of positively charged areas (σ‐holes) on the surface of the iodine substituents in I₄Q^?. responsible for the attractive interaction. Finally, the solid‐state associations were also stabilized by multicenter (4:4) halogen bonding between I₄Q^?. and iodide.     

A Chiral Halogen‐Bonding [3]Rotaxane for the Recognition and Sensing of Biologically Relevant Dicarboxylate Anions

The unprecedented application of a chiral halogen‐bonding [3]rotaxane host system for the discrimination of stereo‐ and E/Z geometric isomers of a dicarboxylate anion guest is described. Synthesised by a chloride anion templation strategy, the [3]rotaxane host recognises dicarboxylates through the formation of 1:1 stoichiometric sandwich complexes. This process was analysed by molecular dynamics simulations, which revealed the critical synergy of halogen and hydrogen bonding interactions in anion discrimination. In addition, the centrally located chiral (S)‐BINOL motif of the [3]rotaxane axle component facilitates the complexed dicarboxylate species to be sensed via a fluorescence response.     

Halotriazolium Axle Functionalised [2]Rotaxanes for Anion Recognition: Investigating the Effects of Halogen‐Bond Donor and Preorganisation

The anion‐templated synthesis of three novel halogen‐bonding 5‐halo‐1,2,3‐triazolium axle containing [2]rotaxanes is described, and the effects of altering the nature of the halogen‐bond donor atom together with the degree of inter‐component preorganisation on the anion‐recognition properties of the interlocked host investigated. The ability of the bromotriazolium motif to direct the halide‐anion‐templated assembly of interpenetrated [2]pseudorotaxanes was studied initially; bromide was found to be the most effective template. As a consequence, bromide anion templation was used to synthesise the first bromotriazolium axle containing [2]rotaxane, the anion‐binding properties of which, determined by ¹H NMR spectroscopic titration experiments, revealed enhanced bromide and iodide recognition relative to a hydrogen‐bonding protic triazolium rotaxane analogue. Two halogen‐bonding [2]rotaxanes with bromo‐ and iodotriazolium motifs integrated into shortened axles designed to increase inter‐component preorganisation were also synthesised. Anion ¹H NMR spectroscopic titration experiments demonstrated that these rotaxanes were able to bind halide anions even more strongly, with the iodotriazolium axle integrated rotaxane capable of recognising halides in aqueous solvent media. Importantly, these observations suggest that a halogen‐bonding interlocked host binding domain, in combination with increased inter‐component preorganisation, are requisite design features for a potent anion receptor.     

Comparison of Hydrogen and Gold Bonding in [XHX]−, [XAuX]−, and Isoelectronic [NgHNg]+, [NgAuNg]+ (X=Halogen,Ng=Noble Gas)

Quantum chemical calculations at the MP2/aug‐cc‐pVTZ and CCSD(T)/aug‐cc‐pVTZ levels have been carried out for the title compounds. The electronic structures were analyzed with a variety of charge and energy partitioning methods. All molecules possess linear equilibrium structures with D_∞h symmetry. The total bond dissociation energies (BDEs) of the strongly bonded halogen anions [XHX]^? and [XAuX]^? decrease from [FHF]^? to [IHI]^? and from [FAuF]^? to [IAuI]^?. The BDEs of the noble gas compounds [NgHNg]⁺ and [NgAuNg]⁺ become larger for the heavier atoms. The central hydrogen and gold atoms carry partial positive charges in the cations and even in the anions, except for [IAuI]^?, in which case the gold atom has a small negative charge of ?0.03 e. The molecular electrostatic potentials reveal that the regions of the most positive or negative charges may not agree with the partial charges of the atoms, because the spatial distribution of the electronic charge needs to be considered. The bonding analysis with the QTAIM method suggests a significant covalent character for the hydrogen bonds to the noble gas atoms in [NgHNg]⁺ and to the halogen atoms in [XHX]^?. The covalent character of the bonding in the gold systems [NgAuNg]⁺ and [XAuX]^? is smaller than in the hydrogen compound. The energy decomposition analysis suggests that the lighter hydrogen systems possess dative bonds X^?→H⁺←X^? or Ng→H⁺←Ng while the heavier homologues exhibit electron sharing through two‐electron, three‐center bonds. Dative bonds X^?→Au⁺←X^? and Ng→Au⁺←Ng are also diagnosed for the lighter gold systems, but the heavier compounds possess electron‐shared bonds.     

Crystal Engineering Using Polyiodide Halogen and Chalcogen Bonding to Isolate the Phenothiazinium Radical Cation and Its Rare Dimer, 10-(3-Phenothiazinylidene)phenothiazinium

Utilizing facile one-electron oxidation of 10H-phenothiazine by molecular diiodine, the solid-state structure of the 10H-phenothiazinium radical cation was obtained in three cation:iodide ratios, as well as its THF and acetone solvates. Oxidation of 10H-phenothiazine with molecular diiodine in DMSO or DMF provided the structure of the radical coupling product 10-(3-phenothiazinyldene)phenothiazinium, which has not been crystallographically characterized to date. The radical cations were balanced by a mixture (I₇)⁻, (I₅)⁻, (I₃)⁻, and I⁻ anions, where a variety of chalcogen, halogen, and hydrogen bonding interactions stabilize the structures to reveal these interesting cationic species.     

Anion Receptor with Xylene Bridged Two Imidazolium Rings

A m-xylene bridged imidazolium receptor 1 has been designed and synthesized. The receptor 1 utilizes two imidazole (C–H)⁺—anion hydrogen bonds and one aromatic hydrogen—anion hydrogen bond. The major driving force of complexation between the receptor 1 and anions comes from two imidazole (C–H)⁺—anion hydrogen bonding. However, some hydrogen bonding energy between aromatic hydrogen and anion exists, although it is expected to be much smaller than that of imidazole (C–H)⁺—anion hydrogen bonds.