Spectral and electrochemical behavior of manganese dioxide nanodispersions prepared in reverse micelle

Nanodispersed aggregates of MnO₂ were prepared in the aqueous core of the H₂O/Aerosol OT (AOT)/heptane reverse micelle using the comproportionation reaction between and Mn²⁺ ions. The formed nanoparticles were characterized by transmission electron microscopy (TEM), UV–visible spectroscopy and cyclic voltammetry. The electro-oxidation of dextrose and fructose on platinum modified by reverse micellar MnO₂ deposits was studied. The oxidation of fructose was found to be much more facile than dextrose oxidation. There was a linear correlation between the steady state oxidation currents and the carbohydrate concentrations, which was shown to be useful for analytical application. The sensitivity for fructose detection was found to be about seven times higher than that of dextrose. The scope of developing an electroanalytical method for estimation of dextrose and fructose individually in their mixture was explored.     

Surfactant-assisted electrodeposition and improved electrochemical capacitance of silver-doped manganese oxide pseudocapacitor electrodes

Ag-doped MnO₂ pseudocapacitor electrodes with dendrite and foam-like structures were successfully produced for the first time using an electrodeposition method employing structure-directing agents, i.e., sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) acting through micelle formation at solid–liquid interfaces. Doping silver with MnO₂ enhanced their electronic conductance. Controlling pseudocapacitor electrode morphologies with surfactants accelerated ion transport. The specific capacitance values of the Ag-doped MnO₂ films produced with SDS and CTAB, measured in 0.5?M Na₂SO₄ at a scan rate of 5?mV?s^?1 were 551 and 557?F?g^?1, respectively. These values are about 2.7-fold higher than that of the pure MnO₂ film and about 1.4-fold higher than that of the Ag-doped MnO₂ film made without using surfactants.     

Effect of ionic and non-ionic surfactants on the reduction of water soluble colloidal MnO<Subscript>2</Subscript> by glycolic acid

Kinetics of the redox reaction between colloidal MnO₂ and glycolic acid have been studied spectrophotometrically by monitoring the decay in the absorbance of colloidal MnO₂ in absence and presence of surfactants. Anionic sodium dodecyl sulfate has no effect, non-ionic Triton X-100 catalyzed the reaction and experiments were not possible in presence of cationic cetyltrimethylammonium bromide due to the precipitation of MnO₂.The reaction followed the same type of kinetic behavior, i.e., fractional-, first- and fractional-order dependencies, respectively, in [glycolic acid], [MnO₂] and [H⁺ ] in both the media. Effects of gum arabic and manganese(II) have also been studied and discussed. Mechanisms in accordance with the experimental data are proposed for the reaction.     

Antagonism in (conventional anionic–gemini anionic) mixed micelle catalyzed oxidation of D‐fructose by alkaline chloramine‐T: A kinetic study

The catalytic effect of individual conventional anionic surfactant, namely, sodium lauryl sulfate (NaLS), anionic gemini surfactant, namely, sodium salt of bis(1‐dodecenyl succinamic acid) (NaBDS), and mixed surfactant (NaLS + NaBDS) on the rate of oxidation of D ‐fructose by alkaline chloramine‐T has been investigated. The reaction always showed a first‐order dependence of rate with respect to each fructose, alkali, and chloramine‐T. The rate was proportional to (k′+k″ [surfactant]), where k′ and k″ are the rate constants in the absence and presence of the surfactant, respectively. The binding parameters have been evaluated. The observed catalytic effect of mixed micelle on the rate of oxidation was always less than the algebraic sum of the catalytic effect of two surfactants when they were taken separately, suggesting an antagonism (negative synergism) in mixed micelle. The antagonism has also been confirmed by determining critical micelle concentration and interaction parameter (β^m) of mixed micelle under the experimental conditions of kinetics, that is, in alkaline medium. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 123–132, 2009     

MMA在胶束水溶液中的光敏聚合

应用动力学方法研究了二苯甲酮/三乙胺引发MMA在胶束水溶液中的光敏聚合反应,结果表明表面活性剂的胶束对聚合反应具有催化作用,以离子型胶束的效果显著,可使反应的量子收率提高4—5倍。聚合速度和产物分子量随胶速浓度而增加,用紫外光谱和~1H—NMR测定了BP/TEA/MMA在离子型胶束中增溶位置,结果表明反应发生在胶束-水界面层。由于增溶于离子胶束中的单体分子具有一定取向性,提高了PMMA的立构有序性。     

Mn Oxide‐Silver Composite Nanowires for Improved Thermal Stability,SERS and Electrical Conductivity

Redox transformation reaction between aqueous AgNO₃ and Mn(CH₃COO)₂ at low temperature (～80 °C) has been adopted for industrial‐scale production of uniform Ag–MnOOH composite nanowires for the first time. Varying amounts of incorporated Ag in the composite retain the 1D morphology of the composite. Nanowires upon annealing evolve Ag–MnO₂ nanocomposites, once again with the retention of the parental morphology. Just 4 % of silver incorporation in the composite demonstrates metal‐like conducting performance from the corresponding semiconducting material. Transition of MnO₂ to Mn₂O₃ to Mn₃O₄ takes place upon heat treatment in relation to successive increase in Ag concentrations in the nanowires. The composites offer resistance to the observed oxide transformation. This is evidenced from the progressive increase in transition temperature. In situ Raman, ex situ thermal and XRD analysis corroborate the fact. The composite with 12 % Ag offers resistance to the transformation of MnO₂, which is also verified from laser heating. Importantly, Ag nanoparticle incorporation is proved to offer a thermally stable and better surface enhanced Raman scattering (SERS) platform than the individual components. Both the Ag–MnOOH and Ag–MnO₂ nanocomposites with 8 atomic % Ag show the best SERS enhancement (enhancement factor ～10¹⁰). The observed enhancement relates to charge transfer as well as electromagnetic effects.     

Ascorbic acid sensor based on ion-sensitive field-effect transistor modified with MnO2 nanoparticles

An ascorbic acid (AA) sensor based on an ion-sensitive field-effect transistor (ISFET) was prepared by modifying the sensitive area of the transducer with MnO₂ nanoparticles. An additional Nafion membrane coated on top of the sensor was used to immobilize the MnO₂ nanoparticles and restrict the amount of ascorbic acid entering the membrane. The reaction of the MnO₂ nanoparticles with ascorbic acid produced a local pH change, which was correlated with the ascorbic acid concentration and could be monitored by the ISFET. The linear range of the ascorbic acid sensor was 0.02-1.27 mM, and the detection limit was 0.01 mM. The effects of buffer concentration, pH, and ionic strength on the sensor performance were also examined. In addition, the sensor has good stability and reproducibility, and the construction and renewal of the sensor are simple and inexpensive.     

Interaction of the Amphiphilic Drug Amitriptyline Hydrochloride with Gemini and Conventional Surfactants: A Physicochemical Approach

Pyrene fluorescence measurements were carried out on various binary mixtures of the antidepressant amphiphilic drug amitriptyline hydrochloride (AMT) with conventional (TTAB and CTAB) and gemini surfactants (14-4-14 and 16-4-16). In all cases mixed micellar aggregates were formed and the mixed critical micelle concentration (cmc) of various mixtures was computed from the I ₁/I ₃ versus total surfactant concentration plots. In the region where mixed micelles are formed, the interaction of the amphiphlic drug and four surfactants showed synergistic behavior. The results were analyzed using an interaction parameter, β, which characterize the interaction in the mixed micelle and is introduced by a regular solution theory. The β values are negative in all binary mixtures, and their magnitudes increase with increasing hydrophobicity of the amphiphile. The micellar mole fraction of AMT in the mixed micelle (x ₁) and in the ideal sate (x _ideal) were evaluated and their values (x ₁ > x _ideal) suggest that the contribution of the AMT component is greater in binary mixtures as compared to that in the ideal state. Activity coefficients (f ₁ and f ₂) and excess Gibbs energy (G _ex) were also calculated. The values of micelle aggregation numbers (N _agg) and various other parameters like the Stern–Volmer constant (K _sv), micropolarity and dielectric constant of mixed systems have also been evaluated from the ratios of respective peak intensities (I ₁/I ₃ or I ₀/I ₁).     

Protonated and layered transition metal oxides as solid acids for dehydration of biomass-based fructose into 5-hydroxymethylfurfural

A serial of protonated and layered transition metal oxides, including layered HTa WO_6, HNbMoO_6 as well as HNb WO_6, were synthesized by solid-state reaction and ion-exchange. The layered HTa WO_6 has been systematically studied as a solid acid to realize the dehydration of fructose to 5-hydroxymethylfurfural(HMF). The transition metal oxide samples were characterized with ICP-OES, EDS, XRD, XPS, SEM, TGA,FT-IR, N2adsorption–desorption and NH3-TPD. The influential factors such as reaction temperature, reaction time, solvent, catalyst amount and substrate concentration were deeply investigated. The optimized fructose conversion rate of 99% with HMF yield of 67% were achieved after 30 min at 140 °C in dimethylsulfoxide.     

Quadrivalent uranium as a reducing agent in potentiometric titrations: Estimation of dichromate,permanganate, bromate and tellurate

Quadrivalent uranium can further be used for the estimation of K₂Cr₂O₇ KmnO₄ (in acid or alkali), H₂TeO₄ and KbrO₃ either alone or in conjunction with Fe⁺³, Ce⁺⁴ and V⁺⁵ The reaction proceeds rapidly in dilute acid solutions and especially when Fe⁺³ iron is used as a catalyst. Reduction of aqueous KmnO₄ gives MnO₂ which then dissolves in the acid of the reagent and undergoes reduction to Mn⁺². In acid solutions no MnO₂ separates. In alkaline medium (1.5–3N NaOH) KmnO₄ is reduced absolutely to MnO₂.     

MnO<Subscript>2</Subscript> Nanoparticles and Carbon Nanofibers Nanocomposites with High Sensing Performance Toward Glucose

By combining the advantages of manganese dioxide nanoparticles (MnO₂ NPs) and carbon nanofibers (CNFs), a biosensing electrode surface as a high-performance enzyme biosensor is designed in this work. MnO₂ NPs and CNFs nanocomposites (MnO₂–CNFs) were prepared by using a simple hydrothermal method and then were characterized by scanning electron microscopy, powder X-ray diffraction, fourier transform infrared spectroscopy, energy dispersive spectrometry and electrochemisty. The results showed that MnO₂ NPs are uniformly attached to the surface of CNFs. Meanwhile, the MnO₂–CNFs nanocomposites as a supporting matrix can provide an efficient and advantageous platform for electrochemical sensing applications. On the basis of the improved sensitivity of MnO₂–CNFs modified electrode toward H₂O₂ at low overpotential, a MnO₂–CNFs based glucose biosensor was fabricated by monitoring H₂O₂ produced by an enzymatic reaction between glucose oxidase and glucose. The constructed biosensor exhibited a linear calibration graph for glucose in a concentration range of 0.08–4.6 mM and a low detection limit of 0.015 mM. In addition, the biosensor showed other excellent characteristics, such as high sensitivity and selectivity, short response time, and the relative low apparent Michaelis–Menten constant. Analysis of human urine spiked with glucose at different concentration levels yielded recoveries between 101.0 and 104.8%.     

Porous chitosan–MnO2 nanohybrid: a green and biodegradable heterogeneous catalyst for aerobic oxidation of alkylarenes and alcohols

A porous chitosan–manganese dioxide (PC–MnO₂) nanohybrid was synthesized using an in situ reduction method, in which potassium permanganate solution and nanoporous chitosan acted as precursor and reducing agent. The chemical and structural properties of PC–MnO₂ were characterized using scanning and transmission electron microscopies, X‐ray diffraction, thermogravimetric analysis and Fourier transform infrared spectroscopy. Highly dispersed MnO₂ nanoparticles in a matrix of porous chitosan showed high catalytic activity for selective aerobic oxidation of alkylarenes and alcohols without using any bases or expensive oxidants. Short reaction time, ease of product separation by filtration and recyclability of the catalyst make it environmentally and economically favoured for the synthesis of versatile aldehydes and ketones. Copyright © 2015 John Wiley & Sons, Ltd.     

Micellization of anionic gemini surfactants and their interaction with polyacrylamide

A series of anionic gemini surfactants have been synthesized. The surface properties and micellization process of as-prepared sulfonate gemini surfactants (SGS) and carboxylate gemini surfactant (CGS) have been studied by surface tension measurement and isothermal titration microcalorimetry. Meanwhile, the interaction of these five surfactants with polyacrylamide (PAM) was investigated using surface tension, steady-state fluorescence measurement, and isothermal titration microcalorimetry. The results show that the critical micelle concentrations (CMCs) of above-mentioned surfactants are more than 1 order of magnitude lower than those of corresponding single chain surfactants. Moreover, the enthalpy of micelle formation (ΔH _mic) for the investigated gemini surfactants is negative. In the surfactant–PAM systems, the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SGS onto PAM is stronger than that of CGS, resulting from more compact structure of SGS aggregates. With increasing surfactant hydrophobicity, the values of ΔH _agg become more exothermic and a ΔS _agg decrease was observed. Therefore, the interaction between SGS and PAM is enthalpy-driven.     

Study of the ligand substitution reaction Fe (CN)5H2O3− + pyrazine in micellar solutions

The ligand substitution reaction Fe(CN)₅H₂O³⁻ + pyrazine → Fe(CN)₅ pyrazine³⁻ + H₂O has been studied in sodium dodecyl sulfate SDS, hexadecyltrimethylammonium bromide, CTAB, and salt aqueous solutions at 298.2 K. Kinetics were studied in dilute and concentrated salt solutions and in SDS and CTAB solutions at surfactant concentrations below and above the critical micelle concentration. Experimental results show that salt effects can be explained by considering the interaction between the cations present in the working media which come from the background electrolyte, and the Fe(CN)₅H₂O³⁻ species in the vicinity of the cyanide ligands. This interaction makes the release of the aqua ligand from the inner-coordination shell of the iron(II) complex to the bulk more difficult resulting in a decrease of the reaction rate when the electrolyte concentration increases. Kinetic data in surfactant solutions show that not only micellized surfactants are operative kinetically, but also nonmicellized surfactants are influencing the reactivity. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 377–384, 1997     

Choline biosensors based on a bi-electrocatalytic property of MnO2 nanoparticles modified electrodes to H2O2

An interesting mode of reactivity of MnO₂ nanoparticles modified electrode in the presence of H₂O₂ is reported. The MnO₂ nanoparticles modified electrodes show a bi-direction electrocatalytic ability toward the reduction/oxidation of H₂O₂. Based on this property, a choline biosensor was fabricated via a direct and facile electrochemical deposition of a biocomposite that was made of chitosan hydrogel, choline oxidase (ChOx) and MnO₂ nanoparticles onto a glassy carbon (GC) electrode. The biocomposite is homogeneous and easily prepared and provides a shelter for the enzyme to retain its bioactivity. The results of square wave voltammetry showed that the electrocatalytic reduction currents increased linearly with the increase of choline chloride concentration in the range of 1.0 × 10⁻⁵ –2.1 × 10⁻³ M and no obvious interference from ascorbic acid and uric acid was observed. Good reproducibility and stability were obtained. A possible reaction mechanism was proposed.     

Photogenic MnO2/Ag metal nanocomposites and their dye adsorbing activities

• Manganese dioxide/silver (MnO₂/Ag) nanoparticles were fabricated by using KMnO₄-NaBH₄ redox reaction at room temperature. The optical and structural properties of MnO₂/Ag were determined using UV–visible and Fourier transform infrared spectroscopies. The morphology was established with scanning and transmission electron microcopies, and X-ray diffraction. MnO₂/Ag showed excellent adsorbing activity to the removal of Congo red. The various kinetic models were used to determine the rate of dye removal. Congo red adsorption onto MnO₂Ag proceeds through the pseudo-second-order kinetic model. Langmuir adsorption capacity (Q⁰_max = 97.1 mg/g), and sorption intensity (n = 1.6) were estimated with Langmuir and Freundlich adsorption isotherm models for 250 mg/L Congo red. Elovich model suggest the adsorption of Congo red with the MnO₂Ag proceeds through the film diffusion. The positive values of enthalpy changes (ΔH⁰), entropy changes (ΔS⁰), and negative Gibbs free energy changes (ΔG⁰) showed that the Congo red adsorption process was endothermic, spontaneous, and chemisorption process followed with physical mechanism. The results showed that the removal efficiency decreases from 98% to 89% after the six consecutive experiments.

     

Hydrolysis of 2,4-Dinitrochlorobenzene Catalyzed by Cationic Micelles

Micellar catalysis by nine cationic surfactants of the basic hydrolysis of 2,4-dinitrochlorobenzene(DNCB) was studied. The results obtained are as follows: (I) The second-order constants k₂ for the hydrolysis reaction of DNCB catalized by the cationic micelles increase by a factor of 11–100 than that in water. Plots of k₂ against the surfactant concentration show an S-type curve, and the catalytic effect is observed below the critical micelle concentration(CMC) of the surfactants. (2) For a series of surfactants, there is an optimal chain length for the alkyl of the surfactants to show the greatest catalytic effect. (3) The hydrolysis rate of DNCB decreases as the base concentration increases. (4) For the surfactants with the same hydrophilic and hydrophobic groups, chlorides have advantage over bromides in enhancing the reaction rate. These results can be interpreted in term of the changes in CMC, micelle size, solubilization capacity of the micelles, binding degree of counterion et al.     

Stability of manganese dioxide by guar gum in the absence or presence of surfactants

Stability of the manganese dioxide (MnO₂) suspensions by non-ionic guar gum (GG) in the absence or presence of the surfactants: anionic sodium dodecyl sulphate (SDS), cationic hexadecyltrimethylammonium bromide (CTAB) and non-ionic Triton X-100 (t-octylphenoxypolyethoxyethanol) and their equimolar mixtures (SDS/TX-100; CTAB/TX-100) was measured using turbidity. The obtained results of the manganese dioxide suspensions stability were discussed together with the adsorption data and with the data concerning the thicknesses of the adsorption layers. In order to gain more information about the structure of the electric double layer surface charge density and the zeta potential measurements were performed. The obtained results show that the addition of guar gum to the MnO₂ suspensions increases MnO₂ stability. The larger this increase is, the higher is the concentration of the polymer (concentration range 10–200 ppm). Moreover, the addition of single surfactants also causes the increase in the effectiveness of stabilizing the manganese dioxide suspensions. The reason for that is formation of multilayer complexes between the polymer and the surfactants. In such a system both the adsorption of polymer and the thickness of polymer adsorption layer increase. The greatest increase in the stability of MnO₂/GG suspensions was provided by the mixture of anionic and non-ionic surfactants due to a strong synergistic effect. Also, mixing the polymer and two surfactants reduces the stability of the suspension.     

Effect of surfactant micelles on the kinetics of oxidation of D‐fructose by cerium(IV) in sulfuric acid medium

Kinetics of the oxidation of D ‐fructose by cerium(IV) has been investigated both in the absence and presence of surfactants (cetyltrimethylammonium bromide, CTAB, and sodium dodecyl sulfate, SDS) in sulfuric acid medium. The reaction exhibits first‐order kinetics each in [cerium(IV)] and [D ‐fructose] and inverse first order in [H₂SO₄]. The Arrhenius equation is found to be valid for the reaction between 30–50°C. A detailed mechanism with the associated reaction kinetics is presented and discussed. While SDS has no effect, CTAB increases the reaction rate with the same kinetic behavior in its presence. The catalytic role of CTAB micelles is discussed in terms of the pseudophase model proposed by Menger and Portnoy. The association constant K_s that equals to 286 mol^?1 dm³ is found for the association of cerium(IV) with the positive head group of CTAB micelles. The effect of inorganic electrolytes (Na₂SO₄, NaNO₃, NaCl) has also been studied and discussed. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 18–25, 2006