Shear-induced orientation of a rigid surfactant mesophase

An optically clear, crystalline, gel-like mesophase is formed by the addition of water to a micellar solution consisting of a mixture of 0.85 M anionic surfactant sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and a 0.42 M zwitterionic surfactant phosphatidylcholine (lecithin) in isooctane. At 25 degrees C and water to AOT molar ratio of 70, the system has a columnar hexagonal microstructure with randomly oriented domains. The shear-induced orientation and subsequent relaxation of this structure were investigated by rheological characterization and small-angle neutron scattering (SANS). The rheological response implies that the domains align under shear, and remain aligned for several hours after cessation of shear. Shear-SANS confirms this picture. The sheared gel mesophase retains its alignment as the temperature is increased to 57 degrees C, indicating the potential to conduct templated polymer and polymer-ceramic composite materials synthesis in aligned systems.     

Shear-induced alignment and nanowire silica synthesis in a rigid crystalline surfactant mesophase

Highly aligned stringlike silica nanostructures are obtained through templated synthesis in the columnar hexagonal structure of a rigid crystalline surfactant mesophase. A two-step procedure is used to first shear-align the surfactant mesophase and then conduct synthesis under quiescent conditions in the mesophase. The mesophase retains its alignment for extended periods, allowing materials synthesis to be decoupled from the application of shear. The observations have significant implications in the control of ceramic microstructure morphology and transitions from nonaligned to aligned nanowire type structures.     

Memory effects across surfactant mesophases

We report a detailed analysis of deuteron NMR spectra of micellar, lamellar, cubic, and hexagonal mesophases in the aqueous non-ionic surfactant system C(12)E(6)/water. Samples are prepared with and without shear. Particular attention is paid to an interesting temperature-driven phase sequence that includes all of the above phases that are studied before and after shear parallel or perpendicular to the magnetic field direction. Surprising memory effects are found across mesophase transitions. These memory effects provide clues to the structure of the various phases.     

表面活性剂胶束形状随浓度转变的核磁共振研究

运用核磁共振一维氢谱和自扩散实验方法研究了聚乙烯乙二醇异辛酚醚(TX-100)、十二烷基苯磺酸钠(SDBS)和十四烷基三甲基溴化铵(TTAB)三种不同类型的表面活性剂在重水溶液中的胶束形状转变, 发现它们在临界胶束浓度以上的各自相应浓度都有胶束形状的变化(由球状转变为椭球状或棒状). 在常温常压和没有其他添加剂的情况下, 表面活性剂溶液浓度高于其临界胶束浓度时, 球状胶束开始形成. 核磁共振一维氢谱和自扩散实验的结果显示, 当溶液浓度继续增加到一定程度时, 溶液中表面活性剂分子的化学位移和自扩散系数的变化速率都有明显的转折, 这说明溶液中球状胶束开始发生转变. 进一步通过仔细分析对比核磁共振一维氢谱中各基团谱峰, 发现表面活性剂胶束亲水表面上的质子的化学位移变化速率要远高于其疏水内核中的质子, 据此推测胶束形状很可能由球状转变为椭球状或棒状.     

Novel organogelators based on pyrazine-2,5-dicarboxylic acid derivatives and their mesomorphic behaviors

A series of new low molecular organogelators (LMOGs) with thermotropic mesophase were synthesized via the reaction of 3,6-dimethyl-pyrazine-2,5-dicarboxylic acid with p-alkoxyl anilines. These compounds readily formed stable gels in a variety of organic solvents and their self-assembly behavior, structure–property relationship were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), ¹H nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FTIR) and ultra-violet–visible spectroscopy (UV). The results showed a combination of intra-hydrogen bonding, π–π stacking and van der Waals interaction resulted in the aggregation of the organogelators to form three-dimension fibrous networks. The gels formed were multi-responsive to environmental stimuli, such as temperature, fluorinion, and shear stress. More importantly, all the organogelators exhibited thermotropic hexagonal column mesophase as revealed by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and variable temperature XRD studies. A control compound was synthesized and its gelling ability was also checked.     

The phase diagram of the lyotropic nematic mesophase in the TTAB/NaBr/water system

The phase diagram of the nematic mesophase present in the tetradecyltrimethylammonium bromide/sodium bromide/water ternary system was determined. A calamitic nematic mesophase (N_C) was observed which extends to very high concentrations of electrolyte. The order parameters of the surfactant head group in the mesophases were studied by the NMR quadrupolar splitting of the deuterated surfactant. On increasing the temperature of nematic mesophases with low electrolyte concentrations, a phase separation occurs with the formation of a more highly ordered hexagonal phase and an isotropic phase. Diffusion measurements of the isotropic micellar solution by the NMR PFG method were used to estimate hydrodynamic radii at low surfactant concentrations and to study micelle diffusion as the concentration of the surfactant was increased to the liquid crystalline region. At higher surfactant concentrations, the diffusion coefficient reached a limiting value. The calamitic nematic mesophase in this surfactant/electrolyte/water system appears to be formed by long wormlike micelles.     

Synthesis of surfactant-templated silica films with orthogonally aligned hexagonal mesophase

Thin silica films with orthogonally aligned hexagonal close-packed cylindrical structure are synthesized by dip coating silica precursors and poly(ethylene oxide)-polyproplyene oxide (PEO-PPO) triblock surfactants (P123) onto modified glass slides. All films cast from this sol display 2D hexagonal pore structures (a approximately 6.2 nm) under transmission electron microscopy (TEM). However, X-ray diffraction (XRD) shows that confining freshly deposited films between two chemically neutral modified slides completely aligns the pores toward the direction orthogonal to the substrate. Equally effective alignment is obtained by using slides modified with either a random PEO-PPO copolymer or P123 itself. The channels in films cast onto unmodified slides, onto modified slides which are exposed to air, or onto modified slides which are exposed to unmodified glass slides align at least partially parallel to the substrate. Parallel mesophase alignment is also observed in a control experiment with a sol containing the nonionic surfactant template decaethelyne glycol hexadecyl ether (Brij-56) sandwiched between copolymer-modified slides because the surfaces are not chemically neutral toward Brij-56. This study confirms that it is possible to use substrate surface chemistry to control the orientation of mesophases in mixtures of reactive silicates and low molecular weight nonionic surfactant templates.     

In situ fluorescence probing of the chemical and structural changes during formation of hexagonal phase cetyltrimethylammonium bromide and lamellar phase CTAB/Poly(dodecylmethacrylate) sol–gel silica thin films

Surfactant-templated mesostructured sol–gel films formed by evaporation induced self assembly (EISA) exhibit highly-ordered hexagonal, lamellar, and cubic structures. The steady-state dip-coating configuration allows both the chemistry and the dynamics of the EISA process to be traced in real time because the steps involved in the formation of the mesostructured material are separated both spatially and temporally in the dip-coating direction. The dynamic processes occurring during film formation can be conveniently monitored by the combination of interferometry and fluorescence spectroscopy of incorporated molecular probes. The selected probes respond to changes in their rotational mobility and the surrounding solvent composition and report these changes through their fluorescence characteristics. By taking in situ fluorescence spectra at various positions within the progressively thinning film, changes in the solvent composition, onset of micelle formation and further organization to the final mesophase structure can be followed. The luminescence of the probe molecule is measured with a spatial resolution of 100 μm. Two categories of surfactant-templated mesostructured sol–gel films were examined. Cetyltrimethylammonium bromide (CTAB) systems assemble into a 2-D hexagonal surfactant/silica mesophase with the surfactant concentration used in this study. CTAB dodecylmethacrylate systems assemble into a lamellar mesophase, which can be further polymerized to form a poly(dodecylmethacrylate)/silica hybrid nanocomposite that mimics nacre. X-ray diffraction patterns, transmission electron microscopy images, and other techniques are used to characterize the final films.     

Formation of {Cu6[S2P(OC2H5)2]6} on Cu2S surfaces from aqueous solutions of the KS2P(OC2H5)2 collector: scanning electron microscopy and solid-state 31P cross-polarization/magic angle spinning and static 65Cu NMR studies

The interactions of synthetic chalcocite surfaces with diethyldithiophosphate, potassium salt, K[S2P(OC2H5)2], were studied by means of 31P cross-polarization/magic angle spinning (CP/MAS) NMR spectroscopy and scanning electron microscopy (SEM). To identify the species formed on the Cu2S surfaces, a polycrystalline {CuI6[S2P(OC2H5)2]6} cluster was synthesized and analyzed by SEM, powder X-ray diffraction techniques and solid-state 31P CP/MAS NMR and static 65Cu NMR spectroscopy. 31P chemical shift anisotropy (CSA) parameters, delta(cs) and eta(cs), were estimated and used for assigning the bridging type of diethyldithiophosphate ligands in the {CuI6[S2P(OC2H5)2]6} cluster. The latter data were compared to 31P CSA parameters estimated from the spinning sideband patterns in 31P NMR spectra of the collector-treated mineral surfaces: formation of polycrystalline {CuI6[S2P(OC2H5)2]6} on the Cu2S surfaces is suggested. The second-order quadrupolar line shape of 65Cu was simulated, and the NMR interaction parameters, CQ and etaQ, for the copper(I) diethyldithiophosphate cluster were obtained.     

Cubic Mesoporous Titanium Phosphonates with Multifunctionality

Cubic mesoporous titanium phosphonate materials with bridged organic groups inside the framework were synthesized by means of a one‐pot hydrothermal autoclaving process, with the assistance of cationic surfactant cetyltrimethylammonium bromide. 1‐Hydroxyethylidene‐1,1‐diphosphonic acid was used as the coupling molecule. A typical cubic mesophase with surface area of 1052 m² g^?1 and pore size of 2.6 nm was confirmed by XRD, TEM, and N₂ sorption analysis. The organophosphonate groups were homogeneously incorporated in the network of the mesoporous solids, as revealed by FTIR and magic‐angle spinning (MAS) NMR spectroscopy, and thermogravimetry and differential scanning calorimetry (TG‐DSC) measurements. The synthesized hydroxyethylidene‐bridged cubic mesoporous titanium phosphonates proved to be thermally stable up to 350 °C, with a well‐preserved hybrid framework and cubic mesoporous architecture. The obtained cubic mesophase could be transformed into a hexagonal mesophase by simply adjusting the molar ratios of the added raw materials, namely, a Ti/P molar ratio of 1:4 and a CTAB/Ti molar ratio of 1.9–2.3 for the cubic phase and Ti/P molar ratio of 3:4 and CTAB/Ti molar ratio of 0.1–0.4 for the hexagonal phase. The cubic hybrid materials could be used as efficient photocatalysts for the photodegradation of rhodamine B. Moreover, they were also used for adsorption of CO₂ and heavy metal ions and exhibited a significant capture amount of around 1.0 mmol g^?1 for CO₂ molecules at 35 °C and high adsorption capacity of 28.5 μmol g^?1 for Cu²⁺ ions with good reusability, which demonstrated their promising potential in environmental remediation.     

Adsorption of bovine alpha-lactalbumin on suspended solid nanospheres and its subsequent displacement studied by NMR spectroscopy

Detailed knowledge of the adsorption-induced conformational changes of proteins is essential to understand the process of protein adsorption. However, not much information about these conformational changes is available. Here, the adsorption of calcium-depleted (APO)- and calcium-containing (HOLO)-bovine alpha-lactalbumin (BLA) on suspended solid polystyrene nanospheres and their subsequent displacement by a surfactant are studied by NMR spectroscopy. To our knowledge, this is the first time that adsorption of proteins on solid nanospheres, with both components present in the NMR sample, is studied by this method. High-quality one-dimensional and two-dimensional 1H NMR spectra of nonadsorbed APO- and HOLO-BLA in the presence of BLA- and/or surfactant-covered solid polystyrene nanospheres in suspension are obtained using standard NMR procedures. BLA and surfactant molecules that are adsorbed on the polystyrene nanospheres give rise to extremely broadened proton resonances. This can be exploited to determine the amount of adsorbed protein and of adsorbed surfactant in a system containing protein, nanospheres, and surfactant, without disturbing the equilibrium of the system. Two-dimensional 1H NMR spectroscopy shows that the chemical shifts of the backbone amide protons of HOLO-BLA after its adsorption and subsequent displacement from polystyrene nanospheres by the surfactant 3-[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate (CHAPS) are identical to those of native HOLO-BLA. The adsorption-induced unfolding of BLA to a molten globule state on polystyrene nanospheres is thus fully reversible at the residue level upon CHAPS-induced displacement of BLA. The latter is the now fulfilled essential requirement that enables the future indirect study, at the residue level, of the conformational characteristics of BLA adsorbed on polystyrene nanospheres by hydrogen/deuterium exchange and NMR spectroscopy. The results presented show that NMR spectroscopy is clearly feasible to study the adsorption of BLA on suspended polystyrene nanospheres. This technique should be applicable to the study of the adsorption of other proteins on other surfaces as well.     

Pore structure, thinning effect, and lateral diffusive dynamics of oriented lipid membranes interacting with antimicrobial peptide protegrin-1: 31P and 2H solid-state NMR study

Membrane pores that are induced in oriented membranes by an antimicrobial peptide (AMP), protegrin-1 (PG-1), are investigated by (31)P and (2)H solid state NMR spectroscopy. We incorporated a well-studied peptide, protegrin-1 (PG-1), a beta-sheet AMP, to investigate AMP-induced dynamic supramolecular lipid assemblies at different peptide concentrations and membrane compositions. Anisotropic NMR line shapes specifying toroidal pores and thinned membranes, which are formed in membrane bilayers by the binding of AMPs, have been analyzed for the first time. Theoretical NMR line shapes of lipids distributed on the surface of toroidal pores and thinned membranes reproduce reasonably well the line shape characteristics of our experimentally measured (31)P and (2)H solid-state NMR spectra of oriented lipids binding with PG-1. The lateral diffusions of lipids are also analyzed from the motionally averaged one- and two-dimensional (31)P and (2)H solid-state NMR spectra of oriented lipids that are binding with AMPs.     

Characterization of a new hexasodium diphosphopentamolybdate hydrate, Na6[P2Mo5O23]x7H2O, by 23Na MQMAS NMR spectroscopy and X-ray powder diffraction

A novel hexasodium disphosphopentamolybdate hydrate, Na6[P2Mo5O23]x7H2O, has been identified using X-ray powder diffraction, 1H, 23Na, and 31P magic-angle spinning (MAS) NMR, and 23Na multiple-quantum (MQ) MAS NMR. Powder XRD reveals that the hydrate belongs to the triclinic spacegroup P1 with cell dimensions a = 10.090(3) A, b = 15.448(5) A, c = 8.460(4) A, alpha = 101.45(6) degrees, beta = 104.09(2) degrees, gamma = 90.71(5) degrees, and Z = 2. The number of water molecules of crystallization has been determined on the basis of a quantitative evaluation of the 1H MAS NMR spectrum, the crystallographic unit cell volume, and a hydrogen content analysis. The 23Na MQMAS NMR spectra of Na6[P2Mo5O23]x7H2O, obtained at three different magnetic fields, clearly resolve resonances from six different sodium sites and allow a determination of the second-order quadrupolar effect parameters and isotropic chemical shifts for the individual resonances. These data are used to determine the quadrupole coupling parameters (CQ and eta Q) from simulations of the complex line shapes of the central transitions, observed in 23Na MAS NMR spectra at the three magnetic fields. This analysis illustrates the advantages of combining MQMAS and MAS NMR at moderate and high magnetic fields for a precise determination of quadrupole coupling parameters and isotropic chemical shifts for multiple sodium sites in inorganic systems. 31P MAS NMR demonstrates the presence of two distinct P sites in the asymmetric unit of Na6[P2Mo5O23].7H2O while the 31P chemical shielding anisotropy parameters, determined for this hydrate and for Na6[P2Mo5O23]x13H2O, show that these two hydrates can easily be distinguished using 31P MAS NMR.     

Mesostructured silica containing conjugated polymers formed within the channels of anodic alumina membranes from tetrahydrofuran-based solution

The synthesis of mesostructured silica from a tetrahydrofuran (THF)-based sol gel was carried out in the channels of an anodic alumina membrane (AAM) using the evaporation-induced self-assembly (EISA) method. Two different nonionic surfactants were used as structure-directing agents, the triblock copolymer Pluronic P123 and the oligomer surfactant Brij56. The effect of the relative humidity and surfactant concentration on the type of mesophase and orientation of the in-channel mesostructures was studied using transmission electron microscopy (TEM) and grazing incidence small angel X-ray scattering (GISAXS). The in-channel structures obtained in this study were primarily of the 2D hexagonal phase with a circular orientation in which the hexagonally packed cylinders form a spiral-like shape from the channel wall inward. In addition, a columnar orientation of the hexagonal phase, in which the axes of the hexagonally packed cylinders are oriented parallel to the channel axes, was also observed. Finally, the use of the THF-based synthesis allowed the in situ incorporation of the highly hydrophobic yellow-emitting conjugated polymer poly[9,9-dioctylfluorene-co-benzothiadiazole] into the in-channel mesostructure upon its formation. The conjugated polymer was well distributed within the mesostructure and maintained its optical properties.     

Characterization of active phosphorus surface sites at synthetic carbonate-free fluorapatite using single-pulse 1H, 31P, and 31P CP MAS NMR

The chemically active phosphorus surface sites defined as PO(x), PO(x)H, and PO(x)H2, where x = 1, 2, or 3, and the bulk phosphorus groups of PO4(3-) at synthetic carbonate-free fluorapatite (Ca5(PO4)3F) have been studied by means of single-pulse 1H,31P, and 31P CP MAS NMR. The changes in composition and relative amounts of each surface species are evaluated as a function of pH. By combining spectra from single-pulse 1H and 31P MAS NMR and data from 31P CP MAS NMR experiments at varying contact times in the range 0.2-3.0 ms, it has been possible to distinguish between resonance lines in the NMR spectra originating from active surface sites and bulk phosphorus groups and also to assign the peaks in the NMR spectra to the specific phosphorus species. In the 31P CP MAS NMR experiments, the spinning frequency was set to 4.2 kHz; in the single-pulse 1H MAS NMR experiments, the spinning frequency was 10 kHz. The 31P CP MAS NMR spectrum of fluorapatite at pH 5.9 showed one dominating resonance line at 2.9 ppm assigned to originate from PO4(3-) groups and two weaker shoulder peaks at 5.4 and 0.8 ppm which were assigned to the unprotonated PO(x) (PO, PO2-, and PO3(2-)) and protonated PO(x)H (PO2H and PO3H-) surface sites. At pH 12.7, the intensity of the peak representing unprotonated PO(x) surface sites has increased 1.7% relative to the bulk peak, while the intensity of the peaks of the protonated species PO(x)H have decreased 1.4% relative to the bulk peak. At pH 3.5, a resonance peak at -4.5 ppm has appeared in the 31P CP MAS NMR spectrum assigned to the surface species PO(x)H2 (PO3H2). The results from the 1H MAS and 31P CP MAS NMR measurements indicated that H+, OH-, and physisorbed H2O at the surface were released during the drying process at 200 degrees C.     

Inclusion complexes between beta-cyclodextrin and a Gemini surfactant in aqueous solution: an NMR study

(1)H NMR spectra, diffusion-ordered NMR (DOSY), and 2D rotating-frame Overhauser enhancement spectroscopy (ROESY) experiments for aqueous solutions at 298 K containing the gemini surfactant, bis (dodecyl dimethylammonium)diethyl ether dibromide (12-EO(1)-12), in the absence and presence of beta-cyclodextrin (beta-CD) were used to characterize the surfactant and to determine the effects of the complexation in the micellization. For the binary system, the critical micelle concentration (cmc), the aggregation number, the stepwise micellization constant, and the size of the monomer have been obtained by studying the dependence of the chemical shifts and the self-diffusion coefficients with the concentration of surfactant. For the ternary system, the analysis of the (1)H NMR spectra and the self-diffusion coefficients reveal the formation of complexes of 1:1 and 2:1 stoichiometry (beta-CD:gemini), with a calculated stability constant for the second binding step higher than that of the first. The values of the hydrodynamic radii of the complexes were obtained from the calculated diffusion coefficients. The presence of beta-CD modifies the cmc in an extension that indicates mainly the formation of a 2:1 complex. The analysis of the chemical shifts of the surfactant indicates the nonparticipation of the complexes into the micelles. ROE enhancements depend substantially on the amount of the macrocycle added and therefore on the stoichiometry; at low concentrations of beta-CD, one of the hydrocarbon chains binds favorably with the cavity whereas the other interacts with the outer face. By contrast, at higher concentrations of beta-CD, the two hydrocarbon tails are included in two different macrocycles.     

Magnetically aligned phospholipid bilayers with large q ratios stabilize magnetic alignment with high order in the gel and L(alpha) phases

The magnetic alignment behavior ofbicelles (magnetically alignable phospholipid bilayered membranes) as a function of the q ratio (1,2-dihexanoyl-sn-glycerol phosphatidylcholine/1,2-dimyristoyl-sn-glycerol phosphatidylcholine mole ratio) and temperature was studied by spin-labeled X-band electron paramagnetic resonance (EPR) spectroscopy and solid-state 2H and 31P NMR spectroscopy. Well-aligned bicelle samples were obtained at 45 degrees C for q ratios between 2.5 and 9.5 in both the EPR and NMR spectroscopic studies. The molecular order of the system, S(mol), increased as the q ratio increased and as the temperature decreased. For higher q ratios (> or = 5.5), bicelles maintained magnetic alignment when cooled below the main phase transition temperature (approximately 30 degrees C when in the presence of lanthanide cations), which is the first time, to our knowledge, that bicelles were magnetically aligned in the gel phase. For the 9.5 q ratio sample at 25 degrees C, S(mol) was calculated to be 0.83 (from 2H NMR spectra, utilizing the isotopic label perdeuterated 1,2-dimyristoyl-sn-glycerol phosphatidylcholine) and 0.911 (from EPR spectra utilizing the spin probe 3beta-doxyl-5alpha-cholestane). The molecular ordering of the high q ratio bicelles is comparable to literature values of S(mol) for both multilamellar vesicles and macroscopically aligned phospholipid bilayers on glass plates. The order parameter S(bicelle) revealed that the greatest degree of bicelle alignment was found at higher temperatures and larger q ratios (S(bicelle) = -0.92 for q ratio 8.5 at 50 degrees C).     

Chromonic liquid crystals formed by CI Acid Red 266 and related structures

Chromonic liquid crystals are currently receiving increased attention because they have applications in a wide range of products. In this study, we have compared the chromonic mesophase behaviour of four azo dyes with similar chemical structures. Our objective is to determine if there is an obvious link between mesophase formation and dye chemical structure. Orange G does not form mesophases over the concentration range examined (saturated solution > ~20–30 wt%). The other three compounds all form nematic (N) and hexagonal (H) mesophases, but over very different concentration ranges. X-ray diffraction shows that the ordered Edicol Sunset Yellow (ESY) aggregates present in the mesophases have a single molecule cross section, while those of CI Acid Red have a cross section equivalent to six to eight molecules, probably organised in a ‘water-filled pipes’ structure. NMR quadrupole splittings of ²H₂O demonstrate that water binding to the aggregates is similar to that found for surfactant lyotropic mesophases. The sodium (²³Na) quadrupole splittings for Orange II and CI Acid Red are similar to the values found for surfactant hexagonal phases, suggesting that most sodium ions are ‘bound’ to the aggregates. This is unlike the behaviour of ESY where only one of the two sodium ions is bound.     

Thermal phase behavior of DMPG bilayers in aqueous dispersions as revealed by 2H- and 31P-NMR

The synthetic lipid 1,2-dimyristoyl-sn-3-phosphoglycerol (DMPG), when dispersed in water/NaCl exhibits a complex phase behavior caused by its almost unlimited swelling in excess water. Using deuterium ((2)H)- and phosphorus ((31)P)-NMR we have studied the molecular properties of DMPG/water/NaCl dispersions as a function of lipid and NaCl concentration. We have measured the order profile of the hydrophobic part of the lipid bilayer with deuterated DMPG while the orientation of the phosphoglycerol headgroup was deduced from the (31)P NMR chemical shielding anisotropy. At temperatures >30 °C we observe well-resolved (2)H- and (31)P NMR spectra not much different from other liquid crystalline bilayers. From the order profiles it is possible to deduce the average length of the flexible fatty acyl chain. Unusual spectra are obtained in the temperature interval of 20-25 °C, indicating one or several phase transitions. The most dramatic changes are seen at low lipid concentration and low ionic strength. Under these conditions and at 25 °C, the phosphoglycerol headgroup rotates into the hydrocarbon layer and the hydrocarbon chains show larger flexing motions than at higher temperatures. The orientation of the phosphoglycerol headgroup depends on the bilayer surface charge and correlates with the degree of dissociation of DMPG-Na(+). The larger the negative surface charge, the more the headgroup rotates toward the nonpolar region.     

Detection of peptide-phospholipid interaction sites in bilayer membranes by 13C NMR spectroscopy: observation of 2H/31P-selective 1H-depolarization under magic-angle spinning

We have developed a solid-state NMR method for observing the signals due to 13C spins of a peptide in the close vicinity of 31P and 2H spins in deuterated phospholipid bilayers. The signal intensities in 13C high-resolution NMR spectra directly indicate the depolarization of 1H by 1H-31P and 1H-2H dipolar couplings under multiple-contact cross-polarization. This method was applied to a fully 13C-, 15N-labeled 14-residue peptide, mastoparan-X (MP-X), bound to phospholipid bilayers whose fatty acyl chains are deuterated. The 13C NMR spectra for the depolarization were simulated from the chemical shifts and structure of membrane-bound MP-X previously determined and the distribution of 2H and 31P spins in lipid bilayers. The minimization of RMSD between the simulated and the experimental spectra showed that the amphiphilic alpha-helix of MP-X was located in the interface between the water layer and the hydrophobic domain of the bilayer, with nonpolar residues facing the phosphorus atoms and alkyl chains of the lipids.