Alternative difference analysis scheme combining R‐space EXAFS fit with global optimization XANES fit for X‐ray transient absorption spectroscopy

Time‐resolved X‐ray absorption spectroscopy (TR‐XAS), based on the laser‐pump/X‐ray‐probe method, is powerful in capturing the change of the geometrical and electronic structure of the absorbing atom upon excitation. TR‐XAS data analysis is generally performed on the laser‐on minus laser‐off difference spectrum. Here, a new analysis scheme is presented for the TR‐XAS difference fitting in both the extended X‐ray absorption fine‐structure (EXAFS) and the X‐ray absorption near‐edge structure (XANES) regions. R‐space EXAFS difference fitting could quickly provide the main quantitative structure change of the first shell. The XANES fitting part introduces a global non‐derivative optimization algorithm and optimizes the local structure change in a flexible way where both the core XAS calculation package and the search method in the fitting shell are changeable. The scheme was applied to the TR‐XAS difference analysis of Fe(phen)₃ spin crossover complex and yielded reliable distance change and excitation population.     

Zr and Ba edge phenomena in the scintillation intensity of fluorozirconate‐based glass‐ceramic X‐ray detectors

The energy‐dependent scintillation intensity of Eu‐doped fluorozirconate glass‐ceramic X‐ray detectors has been investigated in the energy range from 10 to 40 keV. The experiments were performed at the Advanced Photon Source, Argonne National Laboratory, USA. The glass ceramics are based on Eu‐doped fluorozirconate glasses, which were additionally doped with chlorine to initiate the nucleation of BaCl₂ nanocrystals therein. The X‐ray excited scintillation is mainly due to the 5d–4f transition of Eu²⁺ embedded in the BaCl₂ nanocrystals; Eu²⁺ in the glass does not luminesce. Upon appropriate annealing the nanocrystals grow and undergo a phase transition from a hexagonal to an orthorhombic phase of BaCl₂. The scintillation intensity is investigated as a function of the X‐ray energy, particle size and structure of the embedded nanocrystals. The scintillation intensity versus X‐ray energy dependence shows that the intensity is inversely proportional to the photoelectric absorption of the material, i.e. the more photoelectric absorption the less scintillation. At 18 and 37.4 keV a significant decrease in the scintillation intensity can be observed; this energy corresponds to the K‐edge of Zr and Ba, respectively. The glass matrix as well as the structure and size of the embedded nanocrystals have an influence on the scintillation properties of the glass ceramics.     

Pressure study of monoclinic ReO2 up to 1.2 GPa using X‐ray absorption spectroscopy and X‐ray diffraction

The crystal and local atomic structure of monoclinic ReO₂ (α‐ReO₂) under hydrostatic pressure up to 1.2 GPa was investigated for the first time using both X‐ray absorption spectroscopy and high‐resolution synchrotron X‐ray powder diffraction and a home‐built B₄C anvil pressure cell developed for this purpose. Extended X‐ray absorption fine‐structure (EXAFS) data analysis at pressures from ambient up to 1.2 GPa indicates that there are two distinct Re—Re distances and a distorted ReO₆ octahedron in the α‐ReO₂ structure. X‐ray diffraction analysis at ambient pressure revealed an unambiguous solution for the crystal structure of the α‐phase, demonstrating a modulation of the Re—Re distances. The relatively small portion of the diffraction pattern accessed in the pressure‐dependent measurements does not allow for a detailed study of the crystal structure of α‐ReO₂ under pressure. Nonetheless, a shift and reduction in the (011) Bragg peak intensity between 0.4 and 1.2 GPa is observed, with correlation to a decrease in Re—Re distance modulation, as confirmed by EXAFS analysis in the same pressure range. This behavior reveals that α‐ReO₂ is a possible inner pressure gauge for future experiments up to 1.2 GPa.     

Modelling of decay kinetics of self-trapped exciton luminescence in CdWO4 under femtosecond laser excitation in absorption saturation conditions

The analytical expressions for the three-dimensional spatial distribution of excitons and luminescence decay kinetics of wide band-gap crystals were derived taking into account the saturation effect for absorption near the centre of the incident laser beam with Gaussian transversal profile. The model is verified for the excitonic emission of CdWO₄ crystals under excitation by ultra-short laser pulses in the region of weak excitonic absorption.     

A three‐crystal spectrometer for high‐energy resolution fluorescence‐detected X‐ray absorption spectroscopy and X‐ray emission spectroscopy at SSRF

A Johann‐type spectrometer for the study of high‐energy resolution fluorescence‐detected X‐ray absorption spectroscopy, X‐ray emission spectroscopy and resonant inelastic X‐ray scattering has been developed at BL14W1 X‐ray absorption fine structure spectroscopy beamline of Shanghai Synchrotron Radiation Facility. The spectrometer consists of three crystal analyzers mounted on a vertical motion stage. The instrument is scanned vertically and covers the Bragg angle range of 71.5–88°. The energy resolution of the spectrometer ranges from sub‐eV to a few eV. The spectrometer has a solid angle of about 1.87 × 0^?3 of 4π sr, and the overall photons acquired by the detector could be 10⁵ counts per second for the standard sample. The performances of the spectrometer are illustrated by the three experiments that are difficult to perform with the conventional absorption or emission spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

X‐ray‐Raman‐scattering‐based EXAFS beyond the dipole limit

X‐ray Raman scattering (XRS) provides a bulk‐sensitive method of measuring the extended X‐ray absorption fine structure (EXAFS) of soft X‐ray absorption edges. Accurate measurements and data analysis procedures for the determination of XRS‐EXAFS of polycrystalline diamond are described. The contributions of various angular‐momentum components beyond the dipole limit to the atomic background and the EXAFS oscillations are incorporated using self‐consistent real‐space multiple‐scattering calculations. The properly extracted XRS‐EXAFS oscillations are in good agreement with calculations and earlier soft X‐ray EXAFS results. It is shown, however, that under certain conditions multiple‐scattering contributions to XRS‐EXAFS deviate from those in standard EXAFS, leading to noticeable changes in the real‐space signal at higher momentum transfers owing to non‐dipole contributions. These results pave the way for the accurate application of XRS‐EXAFS to previously inaccessible light‐element systems.     

Luminescence and scintillation of Eu2+‐doped high silica glass

High silica glass doped with Eu²⁺ ions was prepared as a scintillating material by impregnation of Eu ions into a porous silica glass followed by reduction sintering in CO atmosphere. A dominant emission band of the Eu²⁺ 5d–4f transition peaking around 430 nm was observed in the luminescence spectrum with the excitation peak around 280 nm and no emission from Eu³⁺ was present. Photoluminescence decay kinetics was governed by decay times of a few microseconds. The Eu²⁺‐doped high silica glass exhibited comparable energy resolution and slightly higher photoelectron yield with respect to the Bi₄Ge₃O₁₂ crystal in the pulse height spectra for X‐ray photon energies within 22–60 keV. Furthermore, a factor of 1.2 higher radioluminescence intensity was observed as well. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Band gap and electronic structure of MgSiN2 determined using soft X‐ray spectroscopy and density functional theory

We present a study of MgSiN₂ using soft X‐ray absorption and emission spectroscopy which directly probe the partial density of states. MgSiN₂ is new as a host lattice for luminescence materials and used in phosphor‐converted light‐emitting diodes. We compare our measurements to our full potential, all electron density funtional theory calculations. We find excellent agreement between experiment and theory and the band gap of MgSiN₂ is measured to be 5.6 ± 0.2 eV in agreement with our calculated value of 5.72 eV. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

An X‐ray Raman spectrometer for EXAFS studies on minerals: bent Laue spectrometer with 20 keV X‐rays

An X‐ray Raman spectrometer for studies of local structures in minerals is discussed. Contrary to widely adopted back‐scattering spectrometers using ≤10 keV X‐rays, a spectrometer utilizing ～20 keV X‐rays and a bent Laue analyzer is proposed. The 20 keV photons penetrate mineral samples much more deeply than 10 keV photons, so that high intensity is obtained owing to an enhancement of the scattering volume. Furthermore, a bent Laue analyzer provides a wide band‐pass and a high reflectivity, leading to a much enhanced integrated intensity. A prototype spectrometer has been constructed and performance tests carried out. The oxygen K‐edge in SiO₂ glass and crystal (α‐quartz) has been measured with energy resolutions of 4 eV (EXAFS mode) and 1.3 eV (XANES mode). Unlike methods previously adopted, it is proposed to determine the pre‐edge curve based on a theoretical Compton profile and a Monte Carlo multiple‐scattering simulation before extracting EXAFS features. It is shown that the obtained EXAFS features are reproduced fairly well by a cluster model with a minimal set of fitting parameters. The spectrometer and the data processing proposed here are readily applicable to high‐pressure studies.     

SUT‐NANOTEC‐SLRI beamline for X‐ray absorption spectroscopy

The SUT‐NANOTEC‐SLRI beamline was constructed in 2012 as the flagship of the SUT‐NANOTEC‐SLRI Joint Research Facility for Synchrotron Utilization, co‐established by Suranaree University of Technology (SUT), National Nanotechnology Center (NANOTEC) and Synchrotron Light Research Institute (SLRI). It is an intermediate‐energy X‐ray absorption spectroscopy (XAS) beamline at SLRI. The beamline delivers an unfocused monochromatic X‐ray beam of tunable photon energy (1.25–10 keV). The maximum normal incident beam size is 13 mm (width) × 1 mm (height) with a photon flux of 3 × 10⁸ to 2 × 10¹⁰ photons s^?1 (100 mA)^?1 varying across photon energies. Details of the beamline and XAS instrumentation are described. To demonstrate the beamline performance, K‐edge XANES spectra of MgO, Al₂O₃, S₈, FeS, FeSO₄, Cu, Cu₂O and CuO, and EXAFS spectra of Cu and CuO are presented.     

Characterization of Micro‐ and Nanoscale LuPO4:Pr3+,Nd3+ with Strong UV‐C Emission to Reduce X‐Ray Doses in Radiation Therapy

UV‐C emitting nanoscale scintillators can be used to sensitize cancer cells selectively against X‐rays during radiation therapy, due to the lethal DNA lesions caused by UV‐C photons. Unfortunately, nanoscale particles (NPs) show decreased UV‐C emission intensity. In this paper, the influence of different Nd³⁺ concentrations on the UV‐C emission of micro‐ and nanoscale LuPO₄:Pr³⁺ is investigated upon X‐ray irradiation and vacuum UV excitation (160 nm). Co‐doped LuPO₄ results in increased UV‐C emission independent of excitation source due to energy transfer from Nd³⁺ to Pr³⁺. The highest UV‐C emission intensity is observed for LuPO₄:Pr³⁺,Nd³⁺(1%,2.5%) upon X‐ray irradiation. Finally, LuPO₄ NPs co‐doped with different dopant concentrations are synthesized, and the biological efficacy of the combined approach (X‐rays and UV‐C) is assessed using the colony formation assay. Cell culture experiments confirm increased cell death compared to X‐rays alone due to the formation of UV‐specific DNA damages, supporting the feasibility of this approach.     

Titanium local structure in tektite probed by X‐ray absorption fine structure spectroscopy

The local structure of titanium in tektites from six strewn fields was studied by Ti K‐edge X‐ray absorption near edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS) in order to provide quantitative data on Ti—O distance and Ti coordination number. The titanium in tektites possessed different coordination environment types. XANES spectra patterns revealed resemblance to high‐temperature TiO₂–SiO₂ glass and TiO₂ anatase. All samples showed that the valence of Ti is 4+. Based on the Ti—O distances, coordination numbers and radial distribution function determined by EXAFS analyses, the tektites were classified into three types: type I, Ti occupies a four‐coordinated tetrahedral site with Ti—O distances of 1.84–1.79 Å; type II, Ti occupies a five‐coordinated trigonal bipyramidal or tetragonal pyramidal site with Ti—O distances of 1.92–1.89 Å; type III, Ti occupies a six‐coordinated octahedral site with Ti—O distances of 2.00–1.96 Å. Although Ti occupies the TiO₆ octahedral site in most titanium minerals under ambient conditions, some tektites have four‐ and five‐coordinated Ti. This study indicated that the local structure of Ti might change in impact events and the following stages.     

Efficient VUV sensitization of Eu3+ emission by Tb3+ in potassium rare‐earth double phosphate

The luminescence properties of K₃Tb(PO₄)₂ activated by Eu³⁺ were studied at excitation over the 120–300 nm wavelength range. It is demonstrated that Tb³⁺ ions, exhibiting a strong absorption band in the vacuum‐ultraviolet (VUV), can provide efficient sensitisation of Eu³⁺ emission in this wave length range, giving rise to intense red luminescence at 150 nm excitation. A proof is given for the concept of VUV sensitisation enabling the engineering of luminescence materials with enhanced conversion efficiency of VUV radiation into visible light. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Reply to the paper “comments on the theory of phase-conjugated waves”, by E. Wolf and W.H. Carter

The NH₄Br crystal is irradiated simultaneously with a modulated red light and a steady UV light in the region of the fundamental absorption band. The resulting recombination luminescence of electrons with V_K centers is phase-sensitively detected, and compared with the emission which is directly excited by UV light. From measurements of the excitation spectra for recombination luminescence, it is pointed out that the dissociation of free excitons occurs efficiently in NH₄Br.     

掺Bi钨酸镉单晶体发光特性的研究

用坩埚下降法(Bridgman)生长出了Bi离子掺杂的CdWO₄单晶.测定了晶体不同部位的吸收光谱、发射光谱和X射线电子能谱(XPS).Bi离子的掺入引起CdWO₄晶体的吸收边从345 nm红移到399 nm.在311 nm, 373 nm,808 nm和980 nm光的激发下,分别观测到中心波长为470 nm,528 nm,1078 nm和较弱的1504 nm四个不同发射带.Bi:CdWO₄单晶的XPS谱分别与Bi₂ 关键词： Bi离子 荧光光谱 X射线电子能谱 4单晶')" href="#">CdWO₄单晶     

In situ X‐ray absorption spectroscopic studies of copper in a copper‐rich sludge during electrokinetic treatments

Speciation of copper in a copper‐rich chemical‐mechanical polishing sludge during electrokinetic treatment has been studied by in situ extended X‐ray absorption fine structure (EXAFS) and X‐ray absorption near‐edge structure (XANES) spectroscopy. The least‐squares‐fitted XANES spectra indicate that the main copper species in the sludge are Cu(OH)₂ (74%), nanosize CuO (20–60 nm) (13%) and CuO (>100 nm) (13%). The average bond distance and coordination number (CN) of Cu—O are 1.96 Å and 3.5, respectively. Under electrokinetic treatment (5 V cm^?1) for 120 min, about 85% of the copper is dissolved in the electrolyte, 13% of which is migrated and enriched on the cathode. Notably the copper nanoparticles in the sludge can also migrate to the cathode under the electric field. By in situ EXAFS, it is found that during the electrokinetic treatment the bond distance and CN of Cu—O are increased by 0.1 Å and 0.9, respectively.     

Exciton and intracenter radiative recombination in ZnMnTe and CdMnTe quantum wells with optically active manganese ions

The emission spectra of Zn_1?x Mn _x Te/Zn_0.6Mg_0.4Te and Cd_1?x Mn _x Te/Cd_0.5Mg_0.5Te quantum-well structures with different manganese concentrations and quantum-well widths are studied at excitation power densities ranging from 10⁵ to 10⁷ W cm^?2. Under strong optical pumping, intracenter luminescence of Mn²⁺ ions degrades as a result of the interaction of excited managanese ions with high-density excitons. This process is accompanied by a strong broadening of the emission band of quantum-well excitons due to the exciton-exciton interaction and saturation of the exciton ground state. Under pumping at a power density of 10⁵ W cm^?2, stimulated emission of quantum-well excitons arises in CdTe/Cd_0.5Mg_0.5Te. The luminescence kinetics of the quantum-well and barrier excitons is investigated with a high temporal resolution. The effect of the quantum-well width and the managanese concentration on the kinetics and band shape of the Mn²⁺ intracenter luminescence characterized by the contribution of the manganese interface ions is determined.     

Thermo-and photostimulated luminescence of CaI2: Tl and CaI2: Pb crystals

Thermo-and photostimulated luminescence of CaI₂: Tl and CaI₂: Pb scintillation crystals under optical and X-ray excitation is studied. It is shown on the basis of the results obtained with account for the data of studies of photo-and X-ray-luminescent properties of these scintillators that Tl⁺ and Pb²⁺ ions form complex capture centers with host defects. These centers are responsible for the thermostimulated luminescence in the temperature range of 150–295 K, and the centers of charge carrier trapping are spatially separated from the centers of recombination emission. An assumption is made that thermo-and photostimulated luminescence of CaI₂: Tl and CaI₂: Pb crystals under optical excitation is observed mainly due to the delocalization of charge carriers from hydrogen-containing centers responsible for the excitation band at 236 nm and the photoluminescence of CaI₂ with a maximum at 395 nm. The luminescence of CaI₂: Tl crystals in the 510-nm band and CaI₂: Pb crystals in the 530-nm band is determined by the radiative decay of near-activator excitons.     

A high‐temperature furnace for in situ synchrotron X‐ray spectroscopy under controlled atmospheric conditions

A high‐temperature furnace with an induction heater coil has been designed and constructed for in situ X‐ray spectroscopic experiments under controlled atmospheric conditions and temperatures up to 3275 K. The multi‐purpose chamber design allows working in backscattering and normal fluorescence mode for synchrotron X‐ray absorption and emission spectroscopy. The use of the furnace is demonstrated in a study of the in situ formation of Cr oxide between 1823 K and 2023 K at logPO₂ values between ?10.0 and ?11.3 using X‐ray absorption near‐edge spectroscopy. The set‐up is of particular interest for studying liquid metals, alloys and other electrically conductive materials under extreme conditions.