Retention Mechanism of Phenolic Compounds in Subcritical Water Chromatography

The transfer enthalpies and entropies of hydroxyl and nitryl in different mobile phase systems were compared by van't Hoff curve. Results suggest that the presence of acetonitrile and methanol in the mobile phase may decrease the interaction of solute and stationary phase with respect to subcritical water, thereby reducing the contribution of enthalpy to the retention. Retention mechanisms of phenolic compound appear to be more similar in subcritical water and water/methanol systems on the PRP-1 column. Hydrogen bond in subcritical water system plays a very important role in the retention of the phenols.     

Enhanced‐fluidity liquid chromatography using mixed‐mode hydrophilic interaction liquid chromatography/strong cation‐exchange retention mechanisms

The potential of enhanced‐fluidity liquid chromatography, a subcritical chromatography technique, in mixed‐mode hydrophilic interaction/strong cation‐exchange separations is explored, using amino acids as analytes. The enhanced‐fluidity liquid mobile phases were prepared by adding liquefied CO₂ to methanol/water mixtures, which increases the diffusivity and decreases the viscosity of the mixture. The addition of CO₂ to methanol/water mixtures resulted in increased retention of the more polar amino acids. The “optimized” chromatographic performance (achieving baseline resolution of all amino acids in the shortest amount of time) of these methanol/water/CO₂ mixtures was compared to traditional acetonitrile/water and methanol/water liquid chromatography mobile phases. Methanol/water/CO₂ mixtures offered higher efficiencies and resolution of the ten amino acids relative to the methanol/water mobile phase, and decreased the required isocratic separation time by a factor of two relative to the acetonitrile/water mobile phase. Large differences in selectivity were also observed between the enhanced‐fluidity and traditional liquid mobile phases. A retention mechanism study was completed, that revealed the enhanced‐fluidity mobile phase separation was governed by a mixed‐mode retention mechanism of hydrophilic interaction/strong cation‐exchange. On the other hand, separations with acetonitrile/water and methanol/water mobile phases were strongly governed by only one retention mechanism, either hydrophilic interaction or strong cation exchange, respectively.     

Comparision of varuious bulk fluids and modifiers as near-crtical mobile phases on a polymeric column using linear solvatio energy realationships

Linear solvation energy realationships (LSERS) were used to qunatitatively compare the relative contributions of dipolarity/polarizability, hydrogen bonding, and other types of intermolecular interactions to retention and selectivity using various bulk moblie phase component. Using experimental condition which differ only by the compostion of the bulk moble phase component, the factors which cause selctivity to differ between HPLC, subcritical fluid chromatography and supercritical fluid charomatography were decovoluted. Heptance-based HPLC mobile phases showed superior selectivities towards analytes which differ in hydrogen bond donating ability, gas-to-hexadecane partion coefficint and dipolarity/ploarizability. subcritical fluid chromatography with HFC-134a (1, 1, 1, 2-tetrafluoroethane) as the bulk fluid produced superior seclectivities for which differ in hydrogen bond accepting ability and execess molar refraction properties. Many of these factors showed temperature dependences which act to attenuate or accenture the particular intermolcular interaction.     

Evaluation of ternary mobile phases for reversed-phase liquid chromatography: Effect of composition on retention mechanism

The effect of varying mobile phase composition across a ternary space between two binary compositions is examined, on four different reversed-phase stationary phases. Examined stationary phases included endcapped C8 and C18, as well as a phenyl phase and a C18 phase with an embedded polar group (EPG). Mobile phases consisting of 50% water and various fractions of methanol and acetonitrile were evaluated. Retention thermodynamics are assessed via use of the van’t Hoff relationship, and retention mechanism is characterized via LSER analysis, as mobile phase composition was varied from 50/50/0 water/methanol/acetonitrile to 50/0/50 water/methanol acetonitrile. As expected, as the fraction of acetonitrile increases in the mobile phase, retention decreases. In most cases, the driving force for this decrease in retention is a reduction of the enthalpic contribution to retention. The entropic contribution to retention actually increases with acetonitrile content, but not enough to overcome the reduction in the enthalpic contribution. In a similar fashion, as methanol is replaced with acetonitrile, the v, e, and a LSER system constants change to favor elution, while the s and c constants change to favor retention. The b system constant did not show a monotonic change with mobile phase composition. Overall changes in retention across the mobile phase composition range varied, based on the identity of the stationary phase and the composition of the mobile phase.     

Mobile phase effects in reversed-phase liquid chromatography: a comparison of acetonitrile/water and methanol/water solvents as studied by molecular simulation

Molecular simulations of water/acetonitrile and water/methanol mobile phases in contact with a C(18) stationary phase were carried out to examine the molecular-level effects of mobile phase composition on structure and retention in reversed-phase liquid chromatography. The simulations indicate that increases in the fraction of organic modifier increase the amount of solvent penetration into the stationary phase and that this intercalated solvent increases chain alignment. This effect is slightly more apparent for acetonitrile containing solvents. The retention mechanism of alkane solutes showed contributions from both partitioning and adsorption. Despite changes in chain structure and solvation, the molecular mechanism of retention for alkane solutes was not affected by solvent composition. The mechanism of retention for alcohol solutes was primarily adsorption at the interface between the mobile and stationary phase, but there were also contributions from interactions with surface silanols. The interaction between the solute and surface silanols become very important at high concentrations of acetonitrile.     

Properties of subcritical water as an eluent for reversed-phase liquid chromatography—Disruption of the hydrogen-bond network at elevated temperature and its consequences

The use of subcritical water as an eluent for reversed-phase liquid chromatography is further explored. Shape selectivity as well as thermodynamic values for solute transfer were measured and compared to those seen with traditional ambient methanol/water and acetonitrile/water mobile phases. Linear solvation energy analysis was also used to analyze extrapolated values of the retention factor in pure water at ambient temperatures (k^′_w${k^{\prime }}_w$) for subcritical water and ambient hydroorganic mobile phases. Results indicate that it is likely that a large disruption in the hydrogen-bonding network of water at high temperatures causes unique chromatographic selectivity, as well as prohibits accurate extrapolation from high temperature to ambient conditions using pure water. Additionally, subcritical water was not found to be a suitable mobile phase for determining k^′_w${k^{\prime }}_w$ for use in estimating octanol/water partition coefficients.     

Thermodynamic and kinetic characterization of a bridged-ethylene hybrid C18 stationary phase

In this study, a series of polycyclic aromatic hydrocarbons (PAHs) and nitrogen-containing polycyclic aromatic hydrocarbons (NPAHs) is separated on a hybrid stationary phase using methanol and acetonitrile mobile phases. Temperature is varied from 283 to 313 K in order to determine thermodynamic and kinetic parameters of the separation. Thermodynamic behavior is characterized by the retention factor and associated changes in molar enthalpy, whereas kinetic behavior is characterized by the rate constants and associated activation energies. In this study, the retention factors for the NPAHs are smaller than those for the parent PAHs in methanol, while they are more similar to the parent PAHs in acetonitrile. The changes in molar enthalpy are very similar for all solutes, yet are more negative in acetonitrile than in methanol. The rate constants for the NPAHs are smaller than those for their parent PAHs in both mobile phases. Moreover, the rate constants in acetonitrile are one to four orders of magnitude smaller than those in methanol. Based on these thermodynamic and kinetic results, the hybrid stationary phase is compared to traditional silica stationary phases. In addition, the relative contributions from the partition and adsorption mechanisms are discussed.     

Retention properties of acetone-water mobile phases on a biphenylsiloxane-bonded silica stationary phase in reversed-phase liquid chromatography

The solvation parameter model system constants and retention factors were used to interpret retention properties of 39 calibration compounds on a biphenylsiloxane-bonded stationary phase (Kinetex biphenyl) for acetone-water binary mobile phase systems containing 30–70% v/v. Variation in system constants, phase ratios, and retention factors of acetone-water binary mobile phases systems were compared with more commonly used acetonitrile and methanol mobile phase systems. Retention properties of acetone mobile phases on a Kinetex biphenyl column were more similar to that of acetonitrile than methanol mobile phases except with respect to selectivity equivalency. Importantly, selectivity differences arising between acetone and acetonitrile systems (the lower hydrogen-bond basicity of acetone-water mobile phases and differences in hydrogen-bond acidity, cavity formation and dispersion interactions) could be exploited in reversed-phase liquid chromatography method development on a Kinetex biphenyl stationary phase.     

Influence of solvent effects on retention in reversed-phase liquid chromatography and solid-phase extraction using a cyanopropylsiloxane-bonded,silica-based sorbent

Summary The solvation parameter model is used to characterize the retention properties of a cyanopropylsiloxanebonded, silica-based sorbent with methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as mobile phases. The system constants over the composition range 1 to 50 % (v/v) organic solvent indicate that retention occurs because of the relative ease of cavity formation in the solvated stationary phase compared to the same process in the predominantly aqueous mobile phase as well as from more favorable stationary phase interactions with solutes containing π- and n-electrons. The capacity of the solute for dipole-type interactions is not important whereas all hydrogen-bond-type interactions result in reduced retention. Graphing the system constants as a function of mobile phase composition provides a simple mechanism for interpreting the change in capacity of the chromatographic system for retention in terms of changes in the relative weighting of fundamental intermolecular interactions. A comparison is also made with the retention properties of an octadecylsiloxane-bonded, silica-based sorbent with 30 % (v/v) methanol in water as the mobile phase and the extraction characteristics of a porous polymer sorbent with 1 % (v/v) methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as the sample processing solvent. Changes in sorbent selectivity due to selective uptake of the processing solvent are much smaller for the cyanopropylsiloxane-bonded sorbent than the results found for a porous polymer sorbent.     

Effects of stationary-phase polarity on retention in reversed bonded phase HPLC columns

Summary Variations in retention and selectivity have been studied in cyano, phenyl and octyl reversed bonded phase HPLC columns. The retention of toluene, phenol, aniline and nitrobenzene in these columns has been measured using binary mixtures of water and methanol, acetonitrile or tetrahydrofuran mobile phases in order to determine the relative contributions of proton donor-proton acceptor and dipole-dipole interactions in the retention process. Retention and selectivity in these columns was correlated with polar group selectivities of mobile phase organic modifiers and the polarity of the bonded stationary phases. In spite of the prominent role of bonded phase volume and residual silanols in the retention process, each column exhibited some unique selectivities when used with different organic modifiers.     

Mobile phase effects on retention on a new butylimidazolium-based high-performance liquid chromatographic stationary phase

A new HPLC stationary phase based on n-butylimidazolium bromide has been characterized by a linear solvation energy relationship (LSER) approach in the binary acetonitrile/water mobile phases. The retention properties of the stationary phase were systematically evaluated in terms of intermolecular interactions between 28 test solutes and the stationary phase. The results and further comparisons with conventional reversed phase system confirm that retention properties are similar to phenyl phases in acetonitrile/water mixtures. The results obtained with acetonitrile/water mixtures are also compared with results obtained using methanol/water mixtures.     

System Maps for Retention of Small Neutral Compounds on a Superficially Porous Ethyl-Bridged,Octadecylsiloxane-Bonded Silica Stationary Phase in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an ethyl-bridged, ocatadecylsiloxane-bonded superficially porous silica stationary phase (Kinetex EVO C18) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not methanol–water mobile phase compositions. Compared with a superficially porous octadecylsiloxane-bonded silica stationary phase (Kinetex C18) with a similar morphology but different topology statistically significant differences in selectivity at the 95% confidence level are observed for neutral compounds that vary by size and hydrogen-bond basicity with other intermolecular interactions roughly similar. These selectivity differences are dampened with acetonitrile–water mobile phases, but are significant for methanol–water mobile phase compositions containing <30% (v/v) methanol. A comparison of a totally porous ethyl-bridged, octadecylsiloxane-bonded silica stationary phase (XBridge C18) with Kinetex EVO C18 indicated that they are effectively selectivity equivalent.     

Enhanced fluidity liquid chromatography for hydrophilic interaction separation of nucleosides

The application of enhanced fluidity liquid (EFL) mobile phases to improving isocratic chromatographic separation of nucleosides in hydrophilic interaction liquid chromatography (HILIC) mode is described. The EFL mobile phase was created by adding carbon dioxide to a methanol/buffer solution. Previous work has shown that EFL mobile phases typically increase the efficiency and the speed of the separation. Herein, an increase in resolution with the addition of carbon dioxide is also observed. This increase in resolution was achieved through increased selectivity and retention with minimal change in separation efficiency. The addition of CO₂ to the mobile phase effectively decreases its polarity, thereby promoting retention in HILIC. Conventional organic solvents of similar nonpolar nature cannot be used to achieve similar results because they are not miscible with methanol and water. The separation of nucleosides with methanol/aqueous buffer/CO₂ mobile phases was also compared to that using acetonitrile/buffer mobile phases. A marked decrease in the necessary separation time was noted for methanol/aqueous buffer/CO₂ mobile phases compared to acetonitrile/buffer mobile phases. There was also an unusual reversal in the elution order of uridine and adenosine when CO₂ was included in the mobile phase.     

Influence of solvent effects on retention in reversed-phase liquid chromatography and solid-phase extraction using a cyanopropylsiloxane-bonded,silica-based sorbent

Summary The solvation parameter model is used to characterize the retention properties of a cyanopropylsiloxane-bonded, silica-based sorbent with methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as mobile phases. The system constants over the composition range 1 to 50% (v/v) organic solvent indicate that retention occurs because of the relative ease of cavity formation in the solvated stationary phase compared to the same process in the predominantly aqueous mobile phase as well as from more favorable stationary phase interactions with solutes containing - and n-electrons. The capacity of the solute for dipole-type interactions is not important whereas all hydrogen-bond-type interactions result in reduced retention. Graphing the system constants as a function of mobile phase composition provides a simple mechanism for interpreting the change in capacity of the chromatographic system for retention in terms of changes in the relative weighting of fundamental intermolecular interactions. A comparison is also made with the retention properties of an octadecylsiloxane-bonded, silica-based sorbent with 30% (v/v) methanol in water as the mobile phase and the extraction characteristics of a porous polymer sorbent with 1% (v/v) methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as the sample processing solvent. Changes in sorbent selectivity due to selective uptake of the processing solvent are much smaller for the cyanopropylsiloxane-bonded sorbent than the results found for a porous polymer sorbent.     

Linear Solvation Energy Relationships in the Determination of Specificity and Selectivity of Stationary Phases

The retention of fifty structurally different compounds has been studied using linear solvation energy relationships. Investigations were performed with the use of six various stationary phases with two mobile phases (50/50 % v/v methanol/water and 50/50 % v/v acetonitrile/water). Packing materials were home-made and functionalized with octadecyl, alkylamide, cholesterol, alkyl-phosphate and phenyl molecules. This is the first attempt to compare all of these stationary phases synthesized on the same silica gel batch. Therefore, all of them may be compared in more complex and believable way, than it was performed earlier in former investigations. The phase properties (based on Abraham model) were used to the classification of stationary phases according to their interaction properties. The hydrophilic system properties s, a, b indicate stronger interactions between solute and mobile phase for most of the columns. Both e and v cause greater retention as a consequence of preferable interactions with stationary phase by electron pairs and cavity formation as well as hydrophobic bonds. However, alkyl-phosphate phase has different retention properties, as it was expressed by positive sign of s coefficient. It may be concluded that most important parameters influencing the retention of compounds are volume and hydrogen bond acceptor basicity. The LSER coefficients showed also the dependency on the type of organic modifier used as a mobile phase component.

     

Linear Solvation Energy Relationships in the Determination of Specificity and Selectivity of Stationary Phases

The retention of fifty structurally different compounds has been studied using linear solvation energy relationships. Investigations were performed with the use of six various stationary phases with two mobile phases (50/50?% v/v methanol/water and 50/50?% v/v acetonitrile/water). Packing materials were home-made and functionalized with octadecyl, alkylamide, cholesterol, alkyl-phosphate and phenyl molecules. This is the first attempt to compare all of these stationary phases synthesized on the same silica gel batch. Therefore, all of them may be compared in more complex and believable way, than it was performed earlier in former investigations. The phase properties (based on Abraham model) were used to the classification of stationary phases according to their interaction properties. The hydrophilic system properties s, a, b indicate stronger interactions between solute and mobile phase for most of the columns. Both e and v cause greater retention as a consequence of preferable interactions with stationary phase by electron pairs and cavity formation as well as hydrophobic bonds. However, alkyl-phosphate phase has different retention properties, as it was expressed by positive sign of s coefficient. It may be concluded that most important parameters influencing the retention of compounds are volume and hydrogen bond acceptor basicity. The LSER coefficients showed also the dependency on the type of organic modifier used as a mobile phase component.     

Insights into the Retention Mechanism of Small Neutral Compounds on Octylsiloxane-Bonded and Diisobutyloctadecylsiloxane-Bonded Silica Stationary Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an octylsiloxane-bonded (Kinetex C8) and diisobutyloctadecylsiloxane-bonded (Kinetex XB-C18) superficially porous silica stationary phases for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not for methanol–water mobile phases. Compared with an octadecylsiloxane-bonded silica stationary phase (Kinetex C18) retention is reduced due to a less favorable phase ratio for both the octylsiloxane-bonded and diisobutyloctadecylsiloxane-bonded silica stationary phases while selectivity differences are small and solvent dependent. Selectivity differences for neutral compounds are larger for methanol–water but significantly suppressed for acetonitrile–water mobile phases. The selectivity differences arise from small changes in all system constants with solute size and hydrogen-bond basicity being the most important due to their dominant contribution to the retention mechanism. Exchanging the octadecylsiloxane-bonded silica column for either the octylsiloxane-bonded or diisobutyloctadecylsiloxane-bonded silica column affords little scope for extending the selectivity space and is restricted to fine tuning of separations, and in some cases, to obtain faster separations due to a more favorable phase ratio. For weak bases larger differences in relative retention are expected with acetonitrile–water mobile phases on account of the additional cation exchange interactions possible that are absent for the octadecylsiloxane-bonded silica stationary phase.     

胆固醇基键合相-反相高效液相色谱法测定正辛醇/水分配系数

通过反相高效液相色谱法系统地考察了中性和弱酸性化合物在新型胆固醇基键合相色谱柱（Cholester柱）上的保留行为。以甲醇和乙腈为有机调节剂,建立了保留因子（k）与有机调节剂比例（φ）间的关系,并外推获取100%水相为流动相时的log k_w;同时进一步建立并验证了不同流动相下正辛醇/水分配系数的对数（log K_ow）和log k_φ（log k_w）间的模型,并预测了部分化合物的log K_ow。结果表明,使用Cholester柱测定log K_ow时,甲醇比乙腈更适合作为有机调节剂;对中性化合物和中性状态的酸性化合物,可以用任意甲醇比例下获取的log k_φ预测log K_ow;对存在离解的酸性化合物,依然用外推方式获取的log k_w预测log K_ow。将采用Cholester柱与文献中采用C₁₈柱、C₈柱建立的log K_ow-log k_φ模型进行对比,结果表明化合物与胆固醇基键合相存在特别的作用。     

Reversed phase liquid chromatographic separation of some mono-substituted phenols with calix[6]arene-ρ-sulfonate-modified eluents

Summary The utility of water-soluble calix[6]arene--sulfonate as a mobile phase additive has been investigated for the reversed phase liquid chromatographic separation of some monosubstituted phenol isomers. Retention factors and separation factors for regioisomers of methoxyphenol, aminophenol, and nitrophenol were measured using methanol — water and acetonitrile —water mobile phases of varying composition containing calix[6]arene--sulfonate, and the values were compared with those obtained using mobile phases containing no additive. It was observed that addition of calix[6]arene--sulfonate to both acetonitrile — water and methanol —water caused a reduction in the retention of the phenol isomers but generally increased the separation between them, thereby improving the overall separation efficiency.     

Insights into the Retention Mechanism for Small Neutral Compounds on Silica-Based Phenyl Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on phenylhexylsiloxane- and pentafluorophenylpropylsiloxane-bonded superficially porous silica stationary phases (Kinetex Phenyl-Hexyl and Kinetex F5) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation exchange) are important for the retention of weak bases for acetonitrile–water mobile phases, but virtually absent for the same compounds for methanol–water mobile phases. The selectivity of the Kinetex Phenyl-Hexyl stationary phase for small neutral compounds is similar to an octadecylsiloxane-bonded silica stationary phase with similar morphology Kinetex C-18 for both methanol–water and acetonitrile–water mobile phase compositions. The Kinetex Phenyl-Hexyl and XBridge Phenyl stationary phases with the same topology but different morphology are selectivity equivalent, confirming that solvation of the interphase region can be effective at dampening selectivity differences for modern stationary phases. Small selectivity differences observed for XTerra Phenyl (different morphology and topology) confirm previous reports that the length and type of space arm for phenylalkylsiloxane-bonded silica stationary phases can result in small changes in selectivity. The pentafluorophenylpropylsiloxane-bonded silica stationary phase (Kinetex F5) has similar separation properties to the phenylhexylsiloxane-bonded silica stationary phases, but is not selectivity equivalent. However, for method development purposes, the scope to vary separations from an octadecylsiloxane-bonded silica stationary phase (Kinetex C-18) to “phenyl phase” of the types studied here is limited for small neutral compounds. In addition, selectivity differences for the above stationary phases are enhanced by methanol–water and largely suppressed by acetonitrile–water mobile phases. For bases, larger selectivity differences are possible for the above stationary phases if electrostatic interactions are exploited, especially for acetonitrile-containing mobile phases.