Surfactant gel adsorption of platinum(II), (IV) and palladium(II) as chloro-complexes and kinetic separation of palladium from platinum using EDTA.

A micellar solution of cetylpyridinium chloride (CPC) can separate into two phases due to a temperature change or to the addition of salts. Platinum(II), (IV) and palladium(II) reacted with chloride ions to form stable anionic complexes of PtCl4(2-), PtCl6(2-) and PdCl4(2-), respectively, and were adsorbed onto the CPC gel phase. The CPC phase plays the role of an ion-exchange adsorbent for the anionic complexes. By such a procedure, the precious metals of platinum and palladium could be separated from base metals such as copper, zinc and iron. The kinetic separation was performed by a ligand exchange reaction of the palladium(II) chloro-complex with EDTA at 60 degrees C. The anionic palladium(II)-EDTA complex could not bind the opposite charged CP+ and was desorbed from the CPC phase. In the aqueous phase, the recovery of palladium(II) by the double-desorption was 101.1 +/- 1.2%. The platinum(II) and (IV) chloro-complexes were stable for at least 30 min and remained in the CPC phase.     

Propiconazole and Penconazole as Effective Extractants for Selective recovery and concentration of platinum(IV) and palladium(II) from hydrochloric acid solutions formed in leaching of spent aluminoplatinum and aluminopalladium catalysts

Selective recovery and concentration of platinum(IV) and palladium(II) from hydrochloric acid solutions of varied composition was studied using commercial reagents propiconazole and penconazole as extractants. The ranges of hydrochloric acid concentrations for effective extraction and highly selective separation of platinum metals from Al(III) and Ni(II) with propiconazole (toluene with 15 vol % n-decanol as deluent) and penconazole (chloroform) were determined. The conditions for 10-fold selective concentration of platinum metals with recovery of more than 99.9% of metal ions into the organic phase were found. The conditions for quantitative (>99%) stripping of platinum(IV) with a hydrochloric acid solution of thiourea and palladium(II) with ammonia solution were determined. The results obtained can be used for optimizing the modes of selective recovery of platinum(IV) and palladium(II) from hydrochloric acid solutions formed in leaching of alumina-supported platinum-rhenium, platinum-nickel, and palladium catalysts.     

Sorption of palladium(II) on stannous ferrocyanide

A fine-crystalline stannous ferrocyanide (SCF) has been prepared by adding tin(II) chloride to potassium hexacyanoferrate(II) solution. The material was characterized by chemical analysis, thermogravimetry, X-ray diffraction and infrared spectra. The solubility of SCF, kinetics and sorption mechanism of palladium in hydrochloric acid solutions were investigated. The palladium exchange capacity of 2.20 mM/g dry weight have been found.     

Synthesis of organo-platinum(II) and -palladium(II) complexes ofN-phenyl- andN-(p-Tolyl)pyrazole

Summary When platinum(II) chloride dissolved in acetic acid containing concentrated hydrochloric acid was refluxed withN-phenylpyrazole(liphpz) andN-(p-tolyl)pyrazole (Htlpz), complexes of composition [Pt(N-C)Cl]₂ (N-C = phpz, tlpz) were obtained, in which phpz and tlpz are coordinated through nitrogen and carbon forming a five membered metallocycle. Similar palladium(II) complexes [Pd(N-C)Cl]₂ were easily prepared by the reaction of palladium(II) chloride with Hphpz and Htlpz in methanol in the presence of lithium chloride. These [M(N-C)CI]₂ complexes reacted with tri-n-butylphosphine (PBu₃) and pyridine (py) to give the adducts [M(N-C)ClL](L = PBu₃, py). Ethylenediamine(en) and acetylacetone(Hacac) gave IPd(phpz)(en)]Cl and [Pd(phpz)(acac)] respectively. These new complexes are characterized by means of¹H-n.m.r. and i.r. spectra, and probable structures are proposed.Reprints of this article are not available.     

Studies on the extraction of platinum metals with tri-iso-octylamine from hydrochloric and hydrobromic acid: separation and determination of gold, palladium and platinum

The extraction of Pd(II), Rh(III), Ir(III), Au(III) and Pt(IV) from hydrochloric and hydrobromic acid with 5% tri-iso-octylamine solution in carbon tetrachloride has been studied. The gold extract from hydrochloric acid is yellow and absorbs at 325 nm, the palladium compound is red and absorbs at 290 nm and 467 nm, and the platinum compound is blood-red and shows absorption at 268 nm. The gold, palladium and platinum extracts from hydrobromic acid are crimson. reddish brown and blood-red, with maximum absorption at 260, 345 and 300 nm respectively. Methods have been devised for the separation of gold from platinum and for its determination and also for the simultaneous determination of palladium and platinum.     

Spectrophotometric determination of noble metals with tin(II) in bromide solutions

In presence of tin(II) bromide, noble metals give coloured products which are suitable for spcctrophotometric determinations. The colours are red (platinum), yellow-orange (rhodium), yellow-brown (palladium), yellow (iridium) and violet (gold) They are extracted, except for gold, with isoamyl alcohol Platinum, rhodium and palladium can be separated from irdium, and rhodium and platinum from palladium. Rhodium and platinum can be determined simultaneously.     

Recovery of palladium(II) and rhodium(III) chloride complexes with a complexing S,N-containing sorbent

Specific features of sorption recovery of palladium(II) and rhodium(III) chloride complexes from hydrochloric acid and chloride solutions with MITKhAT S,N-containing sorbent were revealed. The kinetic and capacity characteristics of the sorbent were determined in relation to the solution composition and kind of the metal. The most probable mechanism of sorption recovery and the composition of the forming Pd(II) and Rh(III) complexes were suggested.     

Extractive separation and spectrophotometric determination of palladium and platinum with dithizone in the presence of stannous chloride

The conditions [acid used, presence of chloride and tin(II)] for the extractive separation and spectrophotometric determination of palladium and platinum as the dithizonates Pd(HDz)(2) and Pt(HDz)(2) have been examined. In the absence of stannous chloride platinum does not undergo extraction. Conditions for the separation and determination of these metals in the presence of mercury, gold and copper, which are also extracted with dithizone into carbon tetrachloride or chloroform under the conditions suitable for palladium (1M sulphuric acid/0.1M hydrochloric acid), have been defined. The mercury and gold dithizonates are formed quickly and can be removed before the palladium and platinum compounds have had time to form. They can be decomposed with iodide. Copper dithizonate is decomposed by reduction with tin(II). The proposed procedure has been applied to the determination of palladium in technical platinum metal.     

Sensitive spectrophotometric determination of palladium with tin(II) chlorided and rhodamine-6g after flotation

Palladium is determined by reaction with tin(II) chloride and rhordamine-6G in hydrochloric acid medium, flotation of the ion-association complex, [(R6G⁺)₂Pd (SnCl^?₃)₄]·[(R6G⁺) (SnCl^?₃] with di-isopropyl ether, and dissolution in acetone for spectrophotometry. The molar absorptivity is 2.84 x 10⁵ l mol^?1 cm^?1 at 530 nm; Beer's law is obeyed in the range 0.05–0.35 μg Pd ml^?1. Other platinum metals and silver interfere. Traces of palladium in silver metal are determined after extraction of palladium with dimethylglyoxime in chloroform.     

Sorption recovery of platinum(II) and platinum(IV) chloro complexes with a heterochain sulfur-containing sorbent

The recovery of platinum(II) and platinum(IV) chloro complexes from hydrochloric acid and chloride solutions with a new heterochain S,N-containing sorbent, MITKhAT, was studied. The suggested mechanism of formation of platinum(II) mercapto-thio ether complexes in the course of sorption was confirmed by DFT calculations. The results of group and selective recovery of platinum metals with MITKhAT sorbent from simulated and real industrial solutions are reported.     

Influence of Masking Agents on the Color Reactions of Dithizone with Pd(II), Hg(II), and Ag(I) Ions after the Sorption of Their Chloride Complexes on the Fibrous Filled Anion Exchanger AV-17

The influence of masking agents (acetate, thiosulfate, tartrate, and iodide ions; thiourea; and ethylenediaminetetraacetic acid (EDTA)) in a dithizone solution on the complexation of Hg(II), Pd(II), and Ag(I) ions on the solid phase of the fibrous anion exchanger filled with AV-17 was studied. Mercury, palladium, and silver were adsorbed as chloride complexes. The possibility of the simultaneous group determination of the three elements and the selective determination of palladium in the presence of mercury and silver by measuring the diffuse reflection coefficient at two wavelengths (580 and 680 nm, respectively) was demonstrated. A mixture of dithizone with EDTA, acetate, iodide, or thiosulfate can be used for masking concomitant elements. The reaction of palladium with dithizone on the solid phase can be used for the test determination of palladium with the detection limit 0.01 mg/L.     

Radiochemical investigation of the electron exchange reaction between tin(II) and tin(IV) in hydrochloric acid solutions

This paper is concerned with the study of isotope exchange reaction between Sn(II) and Sn(IV) in hydrochloric acid solutions. The kinetics of the exchange reaction of tin in these solutions were studied by extraction of Sn(IV)-hydroxyquinolate into chloroform.¹¹³Sn tracer, initially in the Sn(IV) state, was used. The rate of exchange reaction was determined at 22°C in a wide range of hydrochloric acid concentrations (2.8–12M). The dependence of the exchange rate on the concentration of chloride and hydrogen ions in these solutions (ionic strength: I∼8 and I∼12) are given. The activation energy dependence on chloride ion concentration at I∼12 was determined. The possible mechanism of the exchange reaction between tin(II) and tin(IV) is discussed on the basis of these data.     

Chemisorption of Platinum(II) and Platinum(IV) Chloride Complexes on Fibrous Sorbents Derived from Polyacrylonitrile Modified with Aminoguanidine

Sorption of platinum(II) and platinum(IV) chloride complexes on nitrogen-containing fibrous sorbents derived from polyacrylonitrile with aminoguanidine groups (GLIPAN-3) was studied as influenced by the temperature, platinum concentration in the solution, and pH of the solution. The kinetic sorption parameters and the sorption capacities of the sorbents in hydrochloric acid and chloride solutions were determined. The sorption mechanism and the composition of platinum compounds formed in the sorbent phase were suggested.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 729–735.Original Russian Text Copyright © 2005 by Simanova, Kuznetsova, Konovalov, Shchukarev.     

Metal-Metal Interaction and Flexible Motion of Triple-Decker Polypyridyl Platinum(II) and Palladium(II) Complexes

Triple-decker polypyridyl platinum(II) and palladium(II) complexes were prepared using an N,S-bridging ligand. In solution, tight stacking structures were observed at low temperatures, whereas flexible motion was observed at room temperature. These dynamic behaviors are reflected in the electronic absorption and NMR spectra of these complexes.     

Structural Studies with Antimicrobial and Antifertility Activity of a Monofunctional Bidentate Ligand with its Boron(III), Palladium(II), and Platinum(II) Complexes

The reaction of the sulfur donor Schiff base ligand, 7-nitro-3-(indolin-2-one) hydrazinecarbo-thioamide, with phenyldihydroxyboron in benzene, palladium(II)chloride, and platinum(II) chloride, in ethanol, gave the mononuclear tetracoordinated and hexacoordinated complexes. The Schiff base ligand coordinated to the boron atom in 1:1 and 1:2 molar ratios and to the palladium and platinum metals in only 1:2 molar ratios in the presence of an acidic and basic medium. Tentative structural conclusions are drawn for reaction products based upon elemental analysis, electrical conductance, and spectral (electronic, infrared, ¹ H NMR, ¹³ C NMR, and ¹¹ B NMR) data. The antifertility activity of the ligand and its nonmetal/metal complexes are discussed with a comparative study in an effective manner.     

A simple in situ visual and tristimulus colorimetric method for the determination of trace arsenic in environmental water after its collection on a mercury(II)-impregnated paper.

A simple in situ visual and tristimulus colorimetric method for the determination of trace arsenic in environmental water after collecting arsenic on a test paper impregnated with mercury(II) bromide and rosaniline chloride by its reduction aeration has been developed. The color development on the test paper is based on the formations of AsH(HgBr)2 (yellow) and/or As(HgBr)3 (brownish yellow) by a reaction between mercury(II) bromide and arsine (AsH3), which is produced through the reduction of As(III) (arsenite ion) and/or As(V) (arsenate ion) in a sample solution. To a sample solution, potassium iodide, tin(II) chloride, zinc sand and 4 ml of 6 M hydrochloric acid solution were added successively. The liberated arsine was collected on the test paper. The yellow or brownish-yellow color intensity on the test paper was measured by a tristimulus colorimeter and also by a visual method. The established method is applicable to the determination of arsenic in environmental water sample such as river, brackish, and seawater types.     

On the reaction of tin dichloride and of metallic tin with hydrochloric acid in the presence of alkenes. The question of trichlorostannane(IV) or chlorostannate(II) intermediates.

Studies of the reaction of tin dichloride and of metallic tin with hydrochloric acid gas in diethyl ether are described. On the basis of spectroscopic and analytical data it is concluded that the product is not to be regarded as a tin-hydrogen bonded analog of chloroform, viz. trichlorostannane(IV), and the formation of an equilibrium mixture of hydrogen trichlorostannate(II) and dihydrogen tetrachlorostannate(II) is tentatively suggested. The complexes slowly decompose as a result of diethyl ether cleavage, yielding ethanol and ethyl chloride, together with traces of ethyltin trichloride.The mechanism of addition of the complexes to methyl acrylate is discussed in terms of a 1,4-addition involving initial protonation of oxygen. Reaction of the resulting β-carbomethoxyethyltin trichloride with tin or with zinc gives rise to mixtures of bis(β-carbomethoxyethyl)tin dichloride and tris(β-carbomethoxyethyl)tin chloride Similar reactions were observed for the first time with methyltin trichloride, the reaction with zinc being extremely fast at room temperature.     

Ion exchange extraction of platinum(IV) and palladium(II) from hydrochloric acid solutions

Sorption concentration of platinum(II, IV) and palladium(II) from freshly prepared and aged two-yearold hydrochloric acid solutions by a series of anion exchangers with different functional groups and of different physical structure of Purolite and CYBBER grades was studied. The high sorption ability of the ion exchangers in relation to the extracted chlorocomplexes of noble metals is shown. It was demonstrated that palladium(II) from all tested ion exchangers can be completely desorbed with thiourea solutions acidified with hydrochloric acid, while complete desorption of platinum is achieved only from Purolite S 985 anion exchanger of the complexforming type and Purolite A 111 weak base anion exchanger.     

Organometallic chemistry of azuliporphyrins: synthesis, spectroscopy, electrochemistry, and structural characterization of nickel(II), palladium(II), and platinum(II) complexes of azuliporphyrins

Four azuliporphyrins, two meso-unsubstituted and two meso-tetraaryl substituted, were investigated in the synthesis of novel organometallic compounds. The meso-unsubstituted or "etio" series azuliporphyrins 8 reacted with nickel(II) acetate, palladium(II) acetate, and platinum(II) chloride in DMF to give the corresponding chelates 14-16, where the metal cation lies within the macrocyclic cavity and binds to all three nitrogens and the internal carbon atom. The newly available meso-tetraarylazuliporphyrins 13 similarly afforded the corresponding nickel(II), palladium(II), and platinum(II) complexes, 17-19, respectively. The new organometallic complexes are stable nonpolar compounds and were fully characterized spectroscopically and by mass spectrometry. The UV-vis data indicate that these complexes, in common with the parent azuliporphyrin system 8, do not possess porphyrin-type aromaticity. However, electron donation from the azulene unit can give rise to dipolar resonance contributors that provide a degree of carbaporphyrin-type aromatic character. The platinum(II) azuliporphyrins 16 gave noteworthy proton NMR spectra where the meso-protons showed satellite peaks due to transannular coupling to platinum-195. The pyrrolic protons of the platinum(II) meso-tetraarylazuliporphyrin 19b also showed similar satellite peaks due to coupling from the platinum-195 isotope. The electrochemistry of free base tetraphenylazuliporphyrin 13a and the related nickel(II) and palladium(II) complexes was investigated using cyclic voltammetry, and these data indicate that metal coordination improves the reversibility of the ligand-based oxidations. Nickel(II) azuliporphyrin 14a and palladium(II) tetrakis(4-chlorophenyl)azuliporphyrin 18b were also structurally characterized by X-ray crystallography. The macrocyclic core of the palladium(II) complex 18b was significantly more planar than the nickel(II) derivative 14b, and this difference was attributed to the better size match between the azuliporphyrin cavity and the larger palladium(II) ion. The straightforward synthesis of metalloazuliporphyrins under mild conditions, and their interesting spectroscopic, electrochemical, and structural features, demonstrates that the azuliporphyrin system holds great promise as a platform for organometallic chemistry.     

A new solvent extraction scheme for the separation of platinum,palladium, rhodium and iridium

A new scheme is proposed for the separation of platinum, palladium, rhodium and iridium in hydrochloric acid solutions, by solvent extraction. Platinum and palladium are complexed with 2-mercaptobenzothiazole and potassium iodide and simultaneously extracted into chloroform, thus separating them from rhodium and iridium. Palladium is separated from platinum by extracting its dimethylglyoxime complex into chloroform, while rhodium is separated from iridium by extracting its 2-mercaptobenzothiazole complex into chloroform after reduction with tin(II) chloride.