The Crosslinking of Ethylene-Vinyl Acetate Copolymers with Sodium Alcoholates

When reacting ethylene-vinyl acetate copolymers (EVA) with sodium alcoholates in alcohol, the alcoholysis of EVA is accompanied by crosslinking reactions. Crosslinking can be detected by the increase in torque in a plastograph. This paper reports on investigations on the mechanism of the crosslinking reaction. Both crosslinking via C?C bonds and formation of a thermally reversible network via polymer alcoholate structures can be found. If an ethylene-vinyl alcohol copolymer is obtained by complete saponification of EVA, however, only thermally reversible crosslinking can be demonstrated. This leads to the conclusion that irreversible crosslinking is established through a reaction of the acetate side chains. The reaction products of the low-molecular weight model substances, pentanol-3-acetate and sodium isopropylate in isopropanol, are analyzed by means of gas chromatography. These results suggest a partial Claisen condensation as a mechanism of the irreversible crosslinking process.     

Influence of a non-polar medium (alkane and molten polypropylene) on the titanium n-butoxide hydrolysis-condensation reactions

Study of hydrolysis-condensation reactions of titanium n-butoxide precursor into an unusual medium and non-classical conditions was carried out. Kinetic data were reached in a temperature range of 130–250°C from FTIR, TGA–GC–MS and rheological techniques. These results were obtained into an alkane dispersing medium, (Squalane: 2,6,10,15,19,23-hexamethyltetracosane), and compared to the ones determined from the hydrolysis-condensation reactions of the titanium dioxide precursor carried in molten polypropylene (PP) during extrusion process. The transposition of these knowledge to the in situ synthesis of titanium dioxide in molten PP matrix by reactive extrusion lead to the formation of a fine dispersion of few nanometer diameter (~5 nm) of TiO₂ particles. Finally, the viscoelastic behaviour of the nanocomposite has been strongly altered in the terminal relaxation zone as permanent secondary plateau (solid-like behavior), attributed to some fractal arrangement of the inorganic domains was observed.     

PBT modification with EVA/EVOH copolymers: a morphological study

Blends of PBT with different copolymers (EVA, EVOH and EVAVOH) were prepared in a Brabender mixer and their morphology was studied by SEM. VOH groups were found to be much more reactive than VA groups and the residual catalyst in PBT is able to promote grafting reactions at the interphase, and contrary to what was previously reported for PBT‐EVA blends, a fine dispersion was obtained without the addition of fresh catalyst. Many variables such as viscosity ratio, VA content, hydrogen bonding formation and chemical reactions at the interphase were found to influence the final morphology. In particular, the effect of reactions at the interphase is an important factor for copolymers with low polarity.     

利用~1H-NMR研究HDPE/PET/EVA共混体系的酯交换反应

本文在选用EVA作为HDPE/PET共混体系增容剂的基础上 ,通过双螺杆反应挤出熔融加工过程 ,促使EVA侧基上的酯基官能团与PET组分主链上的酯基在适当催化剂———有机金属化合物存在的条件下发生酯交换反应 .1H NMR结果表明 ,酯交换反应的产生在共混体系界面原位形成接枝或交联的PET EVA共聚物 ,且主要是以生成接枝共聚物的反应为主 .     

In situ generation of high aspect ratio silica particles in polypropylene

Polypropylene/silica microcomposites with high aspect ratio silica fillers were in situ generated into a molten polypropylene (PP) matrix. The synthesis of the inorganic domains are based on hydrolysis-condensation reactions of both alkoxysilanes precursors, the tetraethoxysilane (TEOS) and the Dynasil^? 40 (composed of TEOS and partially condensed TEOS with residual ethoxy groups) respectively. The sol?Cgel reactions kinetics studied at room temperature into an acid hydroalcoholic medium for several conditions of pH associated to the processing conditions were the keys factors to control the deformability of the inorganic droplets. Thanks to a shearing hot stage coupled with an optical microscope, silica needles were obtained with a Dynasil^? 40 solution treated 120?min at pH?=?3 in presence of 4?g of ethanol and then placed between two slices of PP in the stage. The deformation of the droplets were then observed once the material was molten and a shearing applied. On the contrary, no deformation was possible with TEOS precursors solutions. The results transposed to the microextruder process equipped at the die with a drawing line allowed to obtain a well pronounced elongated shape of the silica particles dispersed in the polypropylene matrix.     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Porous polyurethanes synthesized within high internal phase emulsions

PolyHIPE are highly porous, emulsion‐templated polymers typically synthesized via free‐radical polymerization within a water‐in‐oil (W/O) high internal phase emulsion (HIPE) whose dispersed, aqueous phase occupies more than 74% of the volume. The synthesis of a polyHIPE containing biodegradable polymers is not straightforward because the presence of both an organic phase and an aqueous phase within the HIPE limits the type of polymerization reactions that can be used. This article describes the synthesis of polyHIPE containing biodegradable poly(ε‐caprolactone) (PCL) groups through the step‐growth reaction of a diisocyanate with a flexible PCL triol to form a crosslinked polyurethane. The reaction of the diisocyanate with the water in the HIPE produced urea groups and large bubbles from the generation of CO₂. The polymer walls between these bubbles consisted of a porous, emulsion‐templated structure. Polymerization with an excess of diisocyanate produced a significant enhancement in the amounts of urea and CO₂. The reduction in the flexible PCL content and the enhancement in the rigid urea content produced an increase in wall modulus that was over 20‐fold. The ability to synthesize polyHIPE through such step‐growth reactions is an important advance in the adaptation of polyHIPE for such applications as tissue engineering. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5806–5814, 2009     

Structure and property studies of hybrid xerogels containing bridged positively charged 1,4-diazoniabicycle[2.2.2]octane dichloride

The compound di-3-n-propyltrimethoxysilane (1,4-diazoniabicycle[2.2.2]octane) dichloride, [(MeO)3Si(CH2)3N+ (CH2CH2)3N+ (CH2)3Si(OME)3]Cl2 was obtained and was used as a precursor reagent to obtain hybrid xerogels where the organic molecule was bonded to a silica framework by reacting the ends of both sides of the precursor reagent. That is, both -Si(OME)3 groups react with tetraethylorthosilicate (TEOS) by hydrolysis-condensation reactions. The resulting hybrid xerogels with variable C/Si mole ratios were prepared and analyzed and their textural characteristics determined. The samples prepared presented micropores with diameter 1.5 nm, the chain length of which matched with the estimated length of the organic bridging group. The charged organic bridging groups allow the immobilization of hexacyanoferrate ions by an ion exchange process. The electron transfer process of the hexacyanoferrate anionic complex confined in the pores of the matrices was studied by cyclovoltammetry.     

Gamma irradiation of high density poly(ethylene)/ethylene‐vinyl acetate/clay nanocomposites: possible mechanism of the influence of clay on irradiated nanocomposites

A further study on mechanical properties and morphology evolution of high density poly (ethylene)/ethylene‐vinyl acetate/and organically‐modified montmorillonite (HDPE/EVA/OMT) nanocomposites exposed to gamma‐rays (0–200 kGy) has been achieved. The results showed that nanocomposites have superior irradiation‐resistant properties to HDPE/EVA blend in mechanical properties. A transmission electron microscope study verified that a face‐face ordered nanostructure had been induced by gamma‐rays. The aim of this paper is to provide a possible mechanism on how the OMT influences the general properties of irradiated nanocomposites, based on the results of thermal, flammability and mechanical behavior. Three facts are postulated to be responsible for the mechanism. The first is the segregation of nano‐dispersed clay layers not only reduces polymer oxidation but prevents crosslinking reactions. The second is the nanostructure evolution induced by gamma‐rays, which may impart nanocomposites improved elasticity. The last is due to the Hofmann degradation, whose degraded products have opposite roles, accelerating polymer oxidation or promoting crosslinking reactions. These facts interact as well as compete with others. The properties of the nanocomposites strongly depended on the prevalent effects developing with increasing irradiation doses. Copyright © 2005 John Wiley & Sons, Ltd.     

Graphene‐Like Covalent Organic Framework with a Wide Band Gap Synthesized On Surface via Stepwise Reactions

Developing graphene‐like two‐dimensional materials naturally possessing a band gap has sparked enormous interest. Thanks to the inherent wide band gap and high mobility in the 2D plane, covalent organic frameworks containing triazine rings (t‐COFs) hold great promise in this regard, whilst the synthesis of single‐layer t‐COFs remains highly challenging. Herein, we present the fabrication of a well‐defined graphene‐like t‐COF on Au(111). Instead of single/multiple‐step single‐type reactions commonly applied for on‐surface synthesis, distinct stepwise on‐surface reactions, including alkynyl cyclotrimerization, C?O bond cleavage, and C?H bond activation, are triggered on demand, leading to product evolution in a controlled step‐by‐step manner. Aside from the precise control in sophisticated on‐surface synthesis, this work proposes a single‐atomic‐layer organic semiconductor with a wide band gap of 3.41 eV.     

Swelling measurement of some ethylene copolymers crosslinked by dicumyl peroxide

Swelling equilibrium of crosslinked ethylene copolymers prepared by the curing of ethylene–vinyl acetate (EVA), ethylene–ethyl acrylate (EEA), and ethylene–acrylic acid (EAA) with dicumyl peroxide (DCP), has been measured in toluene at 23°C. The stress–strain behavior of the swollen EVA and EEA networks was in accord with that predicted from the statistical rubber elasticity theory, while that of the swollen EAA network was divergent. The concentration dependence of the polymer–solvent interaction parameter for the EAA network–toluene system was observed to be highest, while that for the EVA network–toluene system remained nearly zero. The order of the reactivity of pendant groups in the copolymers by radicals from DCP was estimated to be carboxyl > acetyloxy > ethoxycarbonyl group.     

The Crosslinking of Ethylene-Vinyl Acetate with Organometaluc Compounds

Organometallic compounds such as aluminum trialkyl (AIR₃) and lithium alkyl react nonradically with ethylene-vinyl acetate copolymers (EVA) to yield very high crosslinking rates. The mechanism is characterized by simultaneous reactions: addition, reduction, and enolization accompanied with ethene and ethane elimination. The crosslinking reaction is exclusively due to enolization and subsequent dimerization. Systems containing anisole, ether, or quinoline together with AIEt₃ were investigated. It is shown that only free AIR₃ is able to crosslink EVA. The reaction mechanisms were proved experimentally. The process allows the production of polymers exhibiting improved mechanical properties. The polar groups formed during the reaction, and the metal content, improve the ability of the modified polymers to combine with polar polymers. This leads to an increase in adhesiveness to inorganic surfaces compared to radically crosslinked EVA.     

Degradation and stabilisation of poly(ethylene-stat-vinyl acetate): 1 - Spectroscopic and rheological examination of thermal and thermo-oxidative degradation mechanisms

The degradation of ethylene vinyl acetate (EVA) copolymers was compared with low density polyethylene (LDPE), poly(vinyl acetate) (PVAc) and poly(vinyl chloride) (PVC) using FTIR, UV-visible and fluorescence spectroscopy as well as thermal and rheological analyses. Thermal, thermo-oxidative and photo-oxidative studies were conducted. Thermo-oxidation below 180 °C shows more similarities between EVA and LDPE. The luminescence spectra of degraded EVA and LDPE were almost identical but very different to that of PVAc. UV-vis analysis showed that the polyenes present in aged PVC were unlikely to be the same species responsible for the observed colour formation in aged EVA. It is suggested that they are polyconjugated carbonyl products. Rheological analysis also showed the evolution of crosslinking reactions during thermo-oxidation. FTIR studies after thermal degradation in inert conditions 290 °C showed complete loss of the ester functionality and associated lactone formation along with some evidence for ketonic and unsaturated carbonyl groups. Degradation in air at 180 °C, however, revealed that loss of the ester group was not so marked, with PVAc exhibiting the greatest stability. This was in line with the induction time to onset of autocatalytic carbonyl growth at 180 °C; the latter showed an apparent exponential decrease with increasing vinyl acetate content up to 28% w/w. Fluorescence analysis produced trends that complemented those of carbonyl index; the time to decomposition of initial fluorescent α,β-unsaturated carbonyl species coincided with the time to onset of carbonyl growth. Furthermore, the rate of formation of the new fluorescent species produced in EVA, and LDPE was similar to that of carbonyl growth. These new fluorescent species are therefore likely to be di- or tri-carbonyl products.     

Crystalline titania nanoparticles synthesized in nonpolar Lα lecithin liquid-crystalline media in one stage at ambient conditions

High-temperature modification of titania in the form of nanoplatelets is synthesized fast in one step at ambient conditions without any additional treatment like aging or calcination. Lecithin, which is the main component of lipid matrix of biological membranes, is first used as a structure-driven template. It is demonstrated that this natural surfactant can self-organize into lamellar L(α) mesophase when small amounts of water are admixed in its solution in nonpolar solvent. The water locating mainly in lecithin polar region as hydration shell at this concentration triggers the hydrolysis-condensation reactions after the precursor addition that results in instantaneous titania formation in the form of crystalline nanoparticles. Planar lamellar sheets serve as the template specifying its crystallinity.     

Synergistic effects and mechanism of multiwalled carbon nanotubes with magnesium hydroxide in halogen-free flame retardant EVA/MH/MWNT nanocomposites

The synergistic effects and mechanism of multiwalled carbon nanotubes (MWNTs) with magnesium hydroxide (MH) in halogen-free flame retardant EVA/MH/MWNT nanocomposites have been studied by cone calorimeter test (CCT), limiting oxygen index (LOI), thermogravimetric analysis (TGA), torque test, morphological evolution experiment, and scanning electron microscopy (SEM). The data obtained from the CCT, LOI, and TGA show that suitable amount of MWNTs has synergistic effects with MH in the EVA/MH/MWNT nanocomposites. The MWNTs can considerably decrease the heat release rates and mass loss rate by about 50-60%, prolongate the combustion time to near two times, and increase the LOI values by 5% when 2 wt% MWNTs substitute for the MH in the EVA/MH/MWNT samples. The TGA data also show that the synergistic effects of MWNTs with MH apparently increase the thermal degradation temperatures and final charred residues of the EVA/MH/MWNT samples. The experimental observations from the torque, morphological evolution tests, and SEM give positive evidences that the synergistic mechanism of MWNTs with MH can be described to: (i) the increase of melt viscosity because of network structure formation of MWNTs in the EVA/MH matrix; (ii) the enhancement of thermo-oxidation stability due to the MWNTs' mechanical strength and integrity of the charred layers in the EVA/MH/MWNT nanocomposites; (iii) the formation of compact charred layers promoted by MWNTs acted as heat barrier and thermal insulation. All the above-mentioned factors efficiently enhance thermal and flame retardant properties and protect the EVA/MH/MWNT nanocomposite materials to be burning.     

Synthesis and characterization of organic–inorganic hybrid materials prepared by sol–gel and containing CdS nanoparticles prepared by a colloidal method using poly(N-vinyl-2-pyrrolidone)

This paper describes the synthesis and characterization of CdS nanoparticles (NPs) stabilized with poly(N-vinyl-2-pyrrolidone) and their further immobilization on a hybrid organic–inorganic matrix produced by the sol–gel process. The production of the hybrid matrix doped with CdS NPs was carried out in two steps. In the first step a precursor, designated diureasil precursor, was synthesized from the reaction between the terminal amine groups of α,ω-diamine-poly(oxyethylene-co-oxypropylene) and the isocyanate group of 3-isocyanatopropyltriethoxysilane. The next step involved the hydrolysis and condensation reactions of ethoxy groups attached to silicon, this step resulting in the formation of a crosslinked siliceous network linked through urea bonds to a poly(oxyethylene)/poly(oxypropylene) chain. The NPs were added to the diureasil precursor before the gelation process to allow a homogeneous dispersion of the NPs within the matrix. The developed method allowed the transfer of colloidal NPs to a solid matrix without the need of exchange the capping agents or the solvent. The materials were characterized by absorption, steady-state photoluminescence spectroscopy and by TEM. The results obtained showed the presence of CdS NPs with quantum size effect dispersed within the diureasil matrix. The obtained nanocomposites show a high transparency in the visible range accounting for the good dispersion of the NPs within the matrix. The TEM analysis confirmed that the NPs are uniformly dispersed within the diureasil matrix.     

Novel functionally grafted pseudo-semi-interpenetrating networks constructed by reactive linear-dendritic copolymers

This paper describes the synthesis of amphiphilic pseudo-semi-interpenetrating polymer networks (pseudo-semi-IPNs) containing linear poly(styrene) and poly(ethylene glycol) (PEG) cross-linked through monodendritic fragments. A unique feature of the synthetic strategy is the permanent attachment of the linear segment to the PEG network by a transesterification reaction between the hydroxyl groups at both ends of the PEG and peripheral ethyl ester moieties in the monodendron portion of a linear poly(styrene)-dendritic poly(benzyl ether) AB block copolymer. The proceeding of the reaction is monitored by (1)H NMR and size exclusion chromatography (SEC). The formation of an interlock structure between the linear block and the network matrix in the pseudo-semi-IPN is evidenced by the results from spectroscopic analyses and differential scanning calorimetry measurements. The accessibility of functional centers in the grafted semi-IPN is confirmed by model reactions with fluorescent markers, fluorescence spectroscopy, and NMR techniques and shows the potential of these novel materials as sequestering reagents for resin capture-release applications in parallel synthesis, combinatorial chemistry, and advanced drug design.     

Reactive intermediates in the H-phosphonate synthesis of oligonucleotides

The formation of H-phosphonate diesters is an important step in the synthesis of oligonucleotides. Using diphenylchlorophosphate as the activator for the coupling step is often accompanied by side reactions as a result of self 'capping' and other reactions of the reactive intermediate. In the absence of base, the activation of ethyl H-phosphonate with diphenylchlorophosphate probably occurs through the intermediate formation of bis diethyl pyro-di-H-phosphonate rather than the expected diphenyl ethyl pyro-H-phosphonate. Pyridine acts as a nucleophilic catalyst converting diphenylchlorophosphate to its pyridinium adduct. Several side and unwanted reactions are quantified so that conditions to minimise these can be identified.     

Phosphorylated silica/polyamide 6 nanocomposites synthesis by in situ sol–gel method in molten conditions: Impact on the fire-retardancy

Polyamide 6 (PA6)/phosphorylated silica nanocomposites were synthesized during PA6 extrusion through in situ formation of the inorganic phase without solvent. This synthesis is based on the hydrolysis-condensation reactions of diethylphosphatoethyltriethoxysilane (SiP) as a functional inorganic precursor in combination with or without tetraethoxysilane (TEOS) dispersed in the molten PA6. This synthesis is carried out during PA 6 matrix extrusion that means at high temperature and under shear. The characterization of the in situ synthesized PA6/phosphorylated silica nanocomposites by solid ²⁹Si Nuclear Magnetic Resonance (NMR), Small Angle X-ray Scattering (SAXS) and Transmission Electron Microscopy (TEM) coupled with Energy Dispersive X-ray spectroscopy (EDX) demonstrated the possibility to directly create in less than 5 min at 220 °C a phosphorylated silica uniformly dispersed in the PA6, i.e. in the form of well dispersed particles or aggregates of sub-micron range. The influence of silicon and phosphorus on the thermal and fire retardant behaviour was investigated by thermogravimetric analysis (TGA), cone calorimeter and UL94 tests. The fire retardant behaviour was modified with a formation of a char and a peak heat release rate (PHRR) decrease by more than 50% for the SiP based nanocomposite compared to the pure PA6.     

The thermal degradation of poly(vinyl acetate) and poly(ethylene-co-vinyl acetate), Part I: Experimental study of the degradation mechanism

The thermal degradation mechanism of poly(vinyl acetate) (PVAc) and poly(ethylene-co-vinyl acetate) (EVA) copolymers was investigated with solid-state NMR, thermogravimetry coupled with mass spectrometry and differential thermal analysis. Between 300 and 400 °C acetic acid is eliminated (deacetylation), leaving a highly unsaturated residue or polyene. The deacetylation of PVAc is autocatalytic. Upon incorporation of ethylene entities into the polymer backbone, autocatalysis disappears. Between 400 and 500 °C, the polyene will degrade further by chain scission reactions in inert conditions or aromatise in an oxidative environment into a char, and oxidised eventually into CO₂ beyond 500 °C.In inert conditions, the deacetylation step as well as the chain scission reaction shows endothermic effects. In an oxidative environment, large exothermal effects are found for each degradation step. This indicates the occurrence of additional oxidation reactions during deacetylation, an important reorganisation of the polyene during char formation and oxidation of the latter into CO₂.