Properties of matrix-grafted multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposites synthesized by in situ reversible addition-fragmentation chain transfer polymerization

Multi-walled carbon nanotubes (MWCNT)/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized by the in situ reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in the presence of MWCNTs, at which the bulk polymer was grafted onto the surface of nanotubes through the ??grafting through?? strategy. For this purpose, MWCNTs were formerly functionalized with polymerizable MMA groups. MMA and PMMA-grafted MWCNTs were characterized by Fourier-transform infrared spectroscopy, Raman, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Dissolution of nanotubes was examined in chloroform solvent and studied by UV?Cvis spectroscopy. Thermogravimetric and degradation behavior of prepared nanocomposites was investigated by TGA. MWCNTs had a noticeable boosting effect on the thermal stability of nanocomposites. TGA thermograms showed a two-step weight loss pattern for the degradation of MWCNT-PMMA/PMMA nanocomposites which is contrast with neat PMMA. Introduction of MWCNTs also improved the dynamic mechanical behavior and electrical conductivity of nanocomposites. TEM micrograph of nanocomposite revealed that the applied methods for functionalization of nanotubes and in situ synthesis of nanocomposites were comparatively successful in dispersing the MWCNTs in PMMA matrix.     

Phase separation of polymer‐functionalized SWNTs within a PMMA/polystyrene blend

Phase separation of polystyrene (PS) and poly(methyl methacrylate) (PMMA) blends was used as a means to segregate PS‐ or PMMA‐functionalized single‐walled carbon nanotubes (SWNTs) in thin films. Dilute solutions (5 wt % in THF) of 1:1 PS/PMMA blends containing the functionalized nanotubes were spin cast and annealed at 180 °C for 12 h. Two different polymer molecular weights were used (M_n = 8000 or M_n = 22,000), and were of approximately equivalent molecular weight to those attached to the surface of the nanotubes. Nanotube functionalization was accomplished using the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition, in which alkyne‐decorated nanotubes were coupled with azide‐terminated polymers, resulting in polymer‐SWNT conjugates that were soluble in THF. Characterization of the annealed films by scanning Raman spectroscopy, which utilized the unique Raman fingerprint of carbon nanotubes, enabled accurate mapping of the functionalized SWNTs within the films relative to the two phase‐separated polymers. It was found that nanotube localization within the phase‐separated polymer films was influenced by the type of polymer attached to the nanotube surface, as well as its molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 450–458, 2009     

Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality

Composites of poly(methyl methacrylate) (PMMA) with multi-walled carbon nanotubes (MWCNT) of varying aspect ratio and carboxylic acid functionality were prepared using melt mixing. The extent of dispersion and distribution of the MWCNTs in the PMMA matrix was investigated using a combination of high-resolution transmission electron microscopy (HRTEM), wide-angle X-ray diffraction (XRD) and Raman spectroscopy. The electrical resistivity and oscillatory shear rheological properties of the composites were measured as a function of MWCNT geometry, functionality, and concentration. The fundamental ballistic conductance of the pristine free-standing MWCNTs was investigated using a mechanically controlled break-junction method. The electrical conductivity of PMMA was enhanced by up to 11 orders of magnitude for MWCNT concentrations below 0.5 wt.%. MWCNTs having higher aspect ratio, above 500, or functionalized with carboxylic acid groups readily formed rheological percolated networks with thresholds, determined from a power law relationship, of 1.52 and 2.06 wt.%, respectively. The onset of pseudo-solid-like behaviour and network formation is observed as G′, η∗, and tan δ⁻¹ are independent of frequency as MWCNT loading increased. Sufficiently long and/or functionalized tubes are required to physically bridge or provide interfacial interactions with PMMA to alter polymer chain dynamics. Carboxylic acid functionalization disrupts the crystalline order of MWCNTs due to a loss of π-conjugation and electron de-localisation of sp² C-C bonds resulting in non-ballistic electron transport in these tubes, irrespective of how highly dispersed they are in the PMMA matrix.     

Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes

Developing conductive networks in a polymer matrix with a low percolation threshold and excellent mechanical properties is desired for soft electronics applications. In this work, natural rubber (NR) functionalized with poly(methyl methacrylate) (PMMA) was prepared for strong interfacial interactions with multiwalled carbon nanotubes (MWCNT), resulting in excellent performance of the natural rubber nanocomposites. The MWCNT and methyl methacrylate functional groups gave good filler dispersion, conductivity and tensile properties. The filler network in the matrix was studied with microscopy and from its non-linear viscoelasticity. The Maier-Göritze approach revealed that MWCNT network formation was favored in the NR functionalized with PMMA, with reduced electrical and mechanical percolation thresholds. The obvious improvement in physical performance of MWCNT/methyl methacrylate functionalized natural rubber nanocomposites was caused by interfacial interactions and reduced filler agglomeration in the NR matrix. The modification of NR with poly(methyl methacrylate) and MWCNT filler was demonstrated as an effective pathway to enhance the mechanical and electrical properties of natural rubber nanocomposites.     

Synthesis and electrorheological response of nano-sized laponite stabilized poly(methyl methacrylate) spheres

Poly(methyl methacrylate) (PMMA) nanospheres were fabricated via surfactant-free Pickering emulsion polymerization, in which hydrophilic laponite clay was used to stabilize the emulsions of methyl methacrylate dispersed in distilled water. These synthesized PMMA nanoparticles, of which the surface is compactly wrapped by laponite clay, are observed, as confirmed by scanning electron microscopy and transmission electron microscope images. Fourier-transform infrared spectra and thermogravimetry analysis confirm the chemical composition, thermal property, and mass percent of the laponite located on the surface of PMMA particles. Finally, laponite-wrapped nano-sized PMMA spheres were adopted as an electrorheological material. By using an optical microscope, the chain-like structure was observed when an external electric field was applied. In addition, the ER performance was also examined via a rotational rheometer equipped with a high voltage generator.     

基于弱相互作用的石墨化CNT/PMMA复合材料的热电传输性能

从理论上计算了碳纳米管(CNT)与聚甲基丙烯酸甲酯(PMMA)的相互作用及浸润性, 并测试了CNT/PMMA复合材料的电学、热学和光学性能. 发现石墨化CNT/PMMA复合材料具有较好的导热和导电性能, 其渗流阈值在0.8%左右, 当CNT质量分数为3%时, 复合材料的导热系数提高193%. 这种电学及热学性能的提高一方面与石墨化CNTs的规整结构有关, 另一方面与石墨化CNT-PMMA体系的弱相互作用、CNT间的有效接触以及高效的CNT网络输运性能有密切关系. 研究结果表明, 通过调控CNT与聚合物基体的表面性质、相互作用及浸润性, 可以有效地构建优化的CNT输运网络, 获得性能优异的功能复合材料.     

In situ polymerization of methyl methacrylate/multi-walled carbon nanotube composites using cationic stearyl methacrylate copolymers as dispersants

Novel water-soluble amphiphilic copolymers (poly[(stearyl methacrylate)-stat-([2-(methacryloyloxy)ethyl] trimethyl ammonium iodide)]) for dispersing multi-walled carbon nanotubes (MWCNTs) were used to carry out in situ methyl methacrylate (MMA) polymerization. The morphology of the poly(methyl methacrylate)/MWCNT composites and the dispersion of the MWCNTs were analyzed by transmission electron microscopy. The dispersion of multi-walled carbon nanotubes in the composites was excellent for cationic SMA (stearyl methacrylate) copolymers, even at high MWCNT loading (6.0 wt.%). The mechanical properties and electrical and thermal conductivities of the composites were also analyzed. Mechanical properties were improved by MWCNTs; the strain at break values remained stable up to 6.0 wt.% MWCNT loading. Both electrical and thermal conductivities were improved by the addition of MWCNTs.     

Polymerization from the surface of single-walled carbon nanotubes - preparation and characterization of nanocomposites

Single-walled carbon nanotubes were functionalized along their sidewalls with phenol groups using the 1,3-dipolar cycloaddition reaction. These phenols could be further derivatized with 2-bromoisobutyryl bromide, resulting in the attachment of atom transfer radical polymerization initiators to the sidewalls of the nanotubes. These initiators were found to be active in the polymerization of methyl methacrylate and tert-butyl acrylate from the surface of the nanotubes. However, the polymerizations were not controlled, leading to the production of high molecular weight polymers with relatively large polydispersities. The resulting polymerized nanotubes were analyzed by IR, Raman spectroscopy, DSC, TEM, and AFM. The nanotubes functionalized with poly(methyl methacrylate) were found to be insoluble, while those functionalized with poly(tert-butyl acrylate) were soluble in a variety of organic solvents. The tert-butyl groups of these appended polymers could also be removed to produce nanotubes functionalized with poly(acrylic acid), resulting in structures that are soluble in aqueous solutions.     

Matrix‐grafted multiwalled carbon nanotubes/poly(methyl methacrylate) nanocomposites synthesized by in situ RAFT polymerization: A kinetic study

A new approach was developed to functionalize multiwalled carbon nanotubes (MWCNTs) with a polymerizable methyl methacrylate (MMA) groups, and the structure of functionalized MWCNTs were characterized by FTIR, Raman, XPS, and TEM. Using the strategy of “grafting through,” poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of MWCNTs during the in situ synthesis of MWCNT/PMMA nanocomposites over reversible addition‐fragmentation chain transfer (RAFT) polymerization. Kinetics of RAFT‐mediated polymerization of MMA in the presence of MMA‐grafted MWCNTs was studied by using gas chromatography and gel permeation chromatography. To further study, attached polymers were detached and their molecular characteristics were compared to freely formed chains. Results of kinetic studies showed that the utilized commercial chain transfer agent strictly reduced the rate of polymerization as well as relatively controlled molecular weights and narrow molecular weight distributions of free chains. MWCNTs showed a radical activity, retarding the polymerization and reducing the rate of reaction. The effect of MWCNTs concentrations on molecular weights and polydispersity indexes (PDI) was different at the surface and in the bulk. The molecular weights of free chains increased, and the PDI was decreased with increasing MWCNTs. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 555–569, 2012     

A comparative study on properties of multi-walled carbon nanotubes (MWCNTs) modified with acids and oxyfluorination

In this study, the surface modification of multi-walled carbon nanotubes (MWCNTs) with acid and oxyfluorination has been examined. Acid treatment of multi-walled CNTs produces many functionalized groups on the surface of MWCNTs, such as C-N stretching and the asymmetric carboxylate group (-COO-). It can be concluded that nitrogen doping of the graphite sheets may take place and a C-N bond identical to the sp³-bonded carbon nitride may form during the acid treatment process. In addition, oxyfluorinated MWCNTs exhibit higher BET specific surface area and mesopore volume than those of the as-received and acid treated MWCNTs. Therefore, acid and oxyfluorination treatments are more effective methods for enhancing the chemical and textural properties of MWCNTs.     

Thermal degradation of organophosphorus flame-retardant poly(methyl methacrylate) nanocomposites containing nanoclay and carbon nanotubes

Filler nanoparticles pave the way for the development of novel halogen-free flame-retardant polymers. The aim of this study was to investigate the thermal degradability, and in particular, the thermal degradation mechanism of organophosphorus flame-retardant poly(methyl methacrylate) (PMMA) nanocomposites containing nanoclay (NC) and multi-walled carbon nanotubes (CNT). For this purpose, thermogravimetry and direct pyrolysis mass spectrometry analysis were utilized. The onset of degradation was delayed through increased maximum degradation temperature and suppressed mass loss corresponding to initial degradation stage with carbon nanotubes and nanoclays, respectively. Possibility of reactions of melamine and/or melamine derivatives and interactions between carbonyl groups of PMMA and phosphinic acid leading to thermally more stable products was increased owing to the barrier effect of filler nanoparticles. In the presence of NC better flame retarding characteristics was detected as anhydride formation, leading to charring being more effective.     

Multi-walled carbon nanotubes used as support for lipase from <Emphasis Type="Italic">Burkholderia cepacia</Emphasis>

Commercial lipase from Burkholderia cepacia is immobilized on functionalized multi-walled carbon nanotubes (MWNT-COOH and MWNT-OH) provided by a physical adsorption. The immobilization processes for the carbon nanotubes are defined using immobilization time (0–30 min) and distinct adsorbent:adsorbate ratios (1:4, 1:7, and 1:10) with lipase loading of 100, 175, and 250 mg, respectively. The characterization of the immobilized preparations, the free lipase, and the pure nanotubes (MWNT-COOH and MWNT-OH) indicate that the lipase adsorption is increased. Thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy are used. The specific surface area, pore volumes, and average pore diameters are determined by nitrogen adsorption–desorption isotherms. For the pure lipase, in the range between 40 and 300 °C, the micrograph is acquired. Experimental results clearly show an effective lipase adsorption in a lower period of time (5 min) in MWNT-COOH and MWNT-OH as well as a decrease in the surface area (98.30–45.9(86)?±?2.5 and 97.61–37.71?±?3.3(7) m² g^?1) and the pore volume (0.48–0.25?±?0.01 and 0.39–0.24?±?0.05 cm³ g^?1), indicating that functionalized multi-walled carbon nanotubes can be successfully used as enzyme support.     

Controlled functionalization of multiwalled carbon nanotubes by in situ atom transfer radical polymerization

The in situ ATRP (atom transfer radical polymerization) "grafting from" approach was successfully applied to graft poly(methyl methacrylate) (PMMA) onto the convex surfaces of multiwalled carbon nanotubes (MWNT). The thickness of the coated polymer layers can be conveniently controlled by the feed ratio of MMA to preliminarily functionalized MWNT (MWNT-Br). The resulting MWNT-based polymer brushes were characterized and confirmed with FTIR, 1H NMR, SEM, TEM, and TGA. Moreover, the approach has been extended to the copolymerization system, affording novel hybrid core-shell nanoobjects with MWNT as the core and amphiphilic poly(methyl methacrylate)-block-poly(hydroxyethyl methacrylate) (PMMA-b-PHEMA) as the shell. The approach presented here may open an avenue for exploring and preparing novel carbon nanotubes-based nanomaterials and molecular devices with tailor-made structure, architecture, and properties.     

氨基化多壁碳纳米管的制备与表征

以多壁碳纳米管(MWNTs)为原料, 经自由基反应, 制备了氰基改性的多壁碳纳米管, 然后采用Al-NiCl₂·6H₂O-THF体系还原氰基得到了氨基化的碳纳米管。通过拉曼光谱仪、热重分析仪、X射线光电子能谱仪和透射电子显微镜对产物的结构与形貌进行了表征。结果表明:氨基通过共价键枝接在MWNTs的表面, 氨基化多壁碳纳米管每1000个表面碳原子中有17.1个转化为氨基;该反应条件温和, 反应时间短, 且不破坏MWNTs的结构。     

功能化碳纳米管与四苯基锌卟啉轴向配位组装(英文)

本文报道了一种基于四苯基锌卟啉与含吡啶基功能化多壁碳纳米管经轴向配位组装。它们被红外光谱、拉曼光谱和透射电镜所表征。荧光光谱研究表明,在该体系中功能化多壁碳纳米管能有效地淬灭卟啉的荧光。     

Influence of amine-grafted multi-walled carbon nanotubes on physical and rheological properties of PMMA-based nanocomposites

In this work, poly(methyl methacrylate) (PMMA) was grafted onto amine treated multi-walled carbon nanotubes (NH-MWNTs) and the physical and rheological properties of the NH-MWNTs–g-PMMA nanocomposites were investigated. The graft reaction of NH-MWNTs and the PMMA matrix was confirmed from the change of the N_1S peaks, including those of amine oxygen and amide oxygen, by X-ray photoelectron spectroscopy (XPS). The thermal and mechanical properties of the NH-MWNT–g-PMMA nanocomposites were enhanced by the graft reaction between NH-MWNTs and PMMA matrix. In addition, the viscosity of the nanocomposites was increased with the addition of NH-MWNTs. Storage (G′) and loss modulus (G″) were significantly increased by increase in the NH-MWNT content compared to acid-treated MWNTs/PMMA nanocomposites. This increase was attributed to the strong interaction by the grafting reaction between NH-MWNTs and the PMMA matrix.     

Facile Route Using Highly Arrayed PMMA Spheres as Hard Template for the Fabrication of 3D Ordered Nanoporous MgO

"Using magnesium nitrate as Mg source and regularly packed polymethyl methacrylate (PMMA) spheres were synthesized via a combined strategy of emulsifier-free emulsion polymerization and water floating technique as hard template, we fabricated ordered nanoporous magnesium oxide. The synthesized PMMA and MgO samples were characterized by N2 adsorption-desorption, X-ray diffraction, high-resolution scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction. It was observed that the synthesized PMMA spheres possessed a uniform diameter of approximately 284 nm and were in a highly ordered array, and the MgO generated by using the PMMA-templating method exhibited polycrystallinity with three-dimensionally ordered pores. BET surface area of the synthesized MgO sample is 100.7 m2/g, pore volume is 0.46 cm3/g, wall thickness is 4-24 nm, and pore sizes are in the range of 10-120 nm. Such a 3D high-surface-area nanoporous strongly basic MgO is useful in the applications of catalyst supports and acidic gas adsorbents."     

In situ Synthesis of Poly(methyl methacrylate)/Graphene Oxide Nanocomposites Using Thermal-initiated and Graphene Oxide-initiated Polymerization

A facile and cost-effective method to prepare poly(methyl methacrylate) (PMMA)/graphene oxide (GO) nanocomposites was developed by in situ polymerization. By using thermal-initiated and GO-initiated polymerization of methyl methacrylate (MMA), no extra radical initiator was added during the reaction. Without any pre-functionalization of GO, PMMA chains were covalently bonded to its surface, which was confirmed by Fourier-transform infrared, atomic force microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy investigations. TGA analysis showed that the mass ratio of grafted PMMA and GO was as high as 1.7. Transmission electron microscopy and X-ray powder diffraction investigations demonstrated that the grafting of PMMA chains to GO surfaces resulted in homogeneous dispersion of GO sheets in PMMA matrix, which led to a commendable performance on its mechanical and thermal properties. Dynamic mechanical analysis showed that, at a loading level of just 0.5 wt% for the nanocomposites, the storage modulus of the nanocomposites was improved 14%, and the glass transition temperature was increased 12°C in comparison with that of neat PMMA. Thermogravimetric analysis showed that the onset degradation temperature of the nanocomposites was increased 13°C with a GO content of 0.25 wt%.     

Solubilisation of multi walled carbon nanotubes by alpha-pyrene functionalised PMMA and their liquid crystalline self-organisation

alpha-Pyrene functionalised poly(methyl methacrylate) (PMMA) chains were synthesised by RAFT polymerisation and found to be highly efficient to solubilise and disentangle multi walled carbon nanotubes that can now self-organise as liquid crystalline phases in PMMA and PEG 400 matrices.     

Effect of the morphology of structured carbon nanomaterials on their oxidizability

The oxidation of multi-walled carbon nanotubes (MCNTs), nanofibers (CNFs), and few-layer graphite fragments (FLGFs) with a nitric acid solution was studied. The oxygen content in the functionalized derivatives was determined by X-ray photoelectron spectroscopy and thermal analysis. The results were correlated with the structural features of the nanomaterials revealed by high-resolution transmission electron microscopy and X-ray diffraction. The highest content of carboxyl groups was achieved by functionalization of carbon nanotubes with the conical position of graphene layers.