Diimine supported group 10 hydroxo, oxo, amido, and imido complexes

A series of L(2) = diimine (Bian = bis(3,5-diisopropylphenylimino)acenapthene, Bu(t)(2)bpy = 4,4'-di-tert-butyl-2,2'-bipyridine) supported aqua, hydroxo, oxo, amido, imido, and mixed complexes have been prepared. Deprotonation of [L(2)Pt(mu-OH)](2)(2+) with 1,8-bis(dimethylamino)naphthalene, NaH, or KOH yields [(L(2)Pt)(2)(mu-OH)(mu-O)](+) as purple (Bian) or red (Bu(t)(2)bpy) solids. Excess KOH gives dark blue [(Bian)Pt(mu-O)](2). MeOTf addition to [(Bu(t)(2)bpy)(2)Pt(2)(mu-OH)(mu-O)](+) gives [(Bu(t)(2)bpy)(2)Pt(2)(mu-OH)(mu-OMe)](2+) while [(Bian)Pt(mu-O)](2) yields [(Bian)(2)Pt(2)(mu-OMe)(mu-O)](+). Treatment of [(Bian)Pt(mu-O)](2) with "(Ph(3)P)Au(+)" gives deep purple [(Bian)(2)Pt(2)(mu-O)(mu-OAuPPh(3))](+) while (COD)Pt(OTf)(2) gives a low yield of [(Bian)Pt(3)(mu-OH)(3)(COD)(2)](OTf)(3). Ni(Bu(t)(2)bpy)Cl(2) and [(Ph(3)PAu)(3)(mu-O)](+) in a 3 : 2 ratio yield red [Ni(3)(Bu(t)(2)bpy)(3)(mu-O)(2)](2+). M(Bu(t)(2)bpy)Cl(2) (M = Pd, Pt) and [(Ph(3)PAu)(3)(mu-O)](+) give [M(Bu(t)(2)bpy)(mu-OAuPPh(3))](2)(2+) and [Pd(4)(Bu(t)(2)bpy)(4)(mu-OAuPPh(3))](3+). Addition of ArNH(2) to [M(Bu(t)(2)bpy)(mu-OH)](2)(2+) (M = Pd, Pt) gives [Pt(2)(Bu(t)(2)bpy)(2)(mu-NHAr)(mu-OH)](2+) (Ar = Ph, 4-tol, 4-C(6)H(4)NO(2)) and [M(Bu(t)(2)bpy)(mu-NHAr)](2)(2+) (Ar = Ph, tol). Deprotonation of [Pt(2)(Bu(t)(2)bpy)(2)(mu-NH-tol)(mu-OH)](2+) with 1,8-bis(dimethylamino)naphthalene or NaH gives [Pt(2)(Bu(t)(2)bpy)(2)(mu-NH-tol)(mu-O)](+). Deprotonation of [Pt(Bu(t)(2)bpy)(mu-NH-tol)](2)(2+) with KOBu(t) gives deep green [Pt(Bu(t)(2)bpy)(mu-N-tol)](2). The triflate complexes M(Bu(t)(2)bpy)(OTf)(2) (M = Pd, Pt) are obtained from M(Bu(t)(2)bpy)Cl(2) and AgOTf. Treatment of Pt(Bu(t)(2)bpy)(OTf)(2) with water gives the aqua complex [Pt(Bu(t)(2)bpy)(H(2)O)(2)](OTf)(2).     

Dinuclear cyano complexes of cobalt(III) and Iron(III) containing noninnocent 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene bridging ligands

Two new dinucleating ligands 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene, H(4)(tpb), and 1,2,4,5-tetrakis(4-tert-butyl-2-pyridinecarboxamido)benzene, H(4)(tbpb), have been synthesized, and the following dinuclear cyano complexes of cobalt(III) and iron(III) have been isolated: Na(2)[Co(III)(2)(tpb)(CN)(4)] (1); [N(n-Bu)(4)](2)[Co(III)(2)(tbpb)(CN)(4)] (2); [Co(III)(2)(tbpb(ox2))(CN)(4)] (3); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(N(3))(4)] (4); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(CN)(4)] (5); [N(n-Bu)(4)](2)[Fe(III)(2)(tbpb)(CN)(4)] (6). Complexes 2-4 and 6 have been structurally characterized by X-ray crystallography at 100 K. From electrochemical and spectroscopic (UV-vis, IR, EPR, M?ssbauer) and magnetochemical investigations it is established that the coordinated central 1,2,4,5-tetraamidobenzene entity in the cyano complexes can be oxidized in two successive one-electron steps yielding paramagnetic (tbpb(ox1))(3)(-) and diamagnetic (tbpb(ox2))(2)(-) anions. Thus, complex 6 exists in five characterized oxidation levels: [Fe(III)(2)(tbpb(ox2))(CN)(4)](0) (S = 0); [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Fe(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Fe(III)Fe(II)(tbpb)(CN)(4)](3)(-) (S = (1)/(2)); [Fe(II)(2)(tbpb)(CN)(4)](4)(-) (S = 0). The iron(II) and (III) ions are always low-spin configurated. The electronic structure of the paramagnetic iron(III) ions and the exchange interaction of the three-spin system [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) are characterized in detail. Similarly, for 2 three oxidation levels have been identified and fully characterized: [Co(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Co(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Co(III)(2)(tbpb(ox2))(CN)(4)](0). The crystal structures of 2 and 3 clearly show that the two electron oxidation of 2 yielding 3 affects only the central tetraamidobenzene part of the ligand.     

Synthesis and structure of W(eta(2)-mp)(2)(CO)(3) (mp = monoanion of 2-mercaptopyridine) and its reactions with 2,2'-pyridine disulfide and/or NO to yield W(eta(2)-mp)(4), W(eta(2)-mp)(2)(NO)(2), and W(eta(2)-mp)(3)(NO)

Oxidative addition of the sulfur-sulfur bond of 2,2'-pyridine disulfide (C(5)H(4)NS-SC(5)H(4)N) with L(3)W(CO)(3) [L = pyridine, (1)/(3)CHPT; CHPT = cycloheptatriene] in methylene chloride solution yields the seven-coordinate W(II) thiolate complex W(eta(2)-mp)(2)(CO)(3) (mp = monoanion of 2-mercaptopyridine). This complex undergoes slow further oxidative addition with additional pyridine disulfide, yielding W(eta(2)- mp)(4). Reaction of W(eta(2)-mp)(2)(CO)(3) with NO results in quantitative formation of the six-coordinate W(0) complex W(eta(2)-mp)(2)(NO)(2). Reaction of W(eta(2)-mp)(2)(CO)(3) with NO in the presence of added pyridine disulfide yields the seven-coordinate W(II) nitrosyl complex W(eta(2)-mp)(3)(NO) as well as W(eta(2)-mp)(2)(NO)(2) and trace amounts of W(eta(2)-mp)(4). The complex W(eta(2)-mp)(3)(NO) is formed during the course of the reaction and not by reaction of W(eta(2)-mp)(4) or W(eta(2)-mp)(2)(NO)(2) with NO under these conditions. The crystal structures of W(eta(2)- mp)(2)(CO)(3), W(eta(2)-mp)(2)(NO)(2), and W(eta(2)-mp)(3)(NO) are reported.     

Structure and magnetic exchange in heterometallic 3d-3d transition metal triethanolamine clusters

Synthetic methods are described that have resulted in the formation of seven heterometallic complexes, all of which contain partially deprotonated forms of the ligand triethanolamine (teaH(3)). These compounds are [Mn(III)(4)Co(III)(2)Co(II)(2)O(2)(teaH(2))(2)(teaH)(0.82)(dea)(3.18)(O(2)CMe)(2)(OMe)(2)](BF(4))(2)(O(2)CMe)(2)·3.18MeOH·H(2)O (1), [Mn(II)(2)Mn(III)(2)Co(III)(2)(teaH)(4)(OMe)(2)(acac)(4)](NO(3))(2)·2MeOH (2), [Mn(III)(2)Ni(II)(4)(teaH)(4)(O(2)CMe)(6)]·2MeCN (3), [Mn(III)(2)Co(II)(2)(teaH)(2)(sal)(2)(acac)(2)(MeOH)(2)]·2MeOH (4), [Mn(II)(2)Fe(III)(2)(teaH)(2)(paa)(4)](NO(3))(2)·2MeOH·CH(2)Cl(2) (5), [Mn(II)Mn(III)(2)Co(III)(2)O(teaH)(2)(dea)(Iso)(OMe)(F)(2)(Phen)(2)](BF(4))(NO(3))·3MeOH (6) and [Mn(II)(2)Mn(III)Co(III)(2)(OH)(teaH)(3)(teaH(2))(acac)(3)](NO(3))(2)·3CH(2)Cl(2) (7). All of the compounds contain manganese, combined with 3d transition metal ions such as Fe, Co and Ni. The crystal structures are described and examples of 'rods', tetranuclear 'butterfly' and 'triangular' Mn(3) cluster motifs, flanked in some cases by diamagnetic cobalt(III) centres, are presented. Detailed DC and AC magnetic susceptibility and magnetization studies, combined with spin Hamiltonian analysis, have yielded J values and identified the spin ground states. In most cases, the energies of the low-lying excited states have also been obtained. The features of note include the 'inverse butterfly' spin arrangement in 2, 4 and 5. A S = 5/2 ground state occurs, for the first time, in the Mn(III)(2)Mn(II) triangular moiety within 6, the many other reported [Mn(3)O](6+) examples having S = ? or 3/2 ground states. Compound 7 provides the first example of a Mn(II)(2)Mn(III) triangle, here within a pentanuclear Mn(3)Co(2) cluster.     

Cyanide adducts on the diruthenium core of [Ru2(L)4](+) (L = ap, CH3ap, Fap, or F3ap). Electronic properties and binding modes of the bridging ligand

The products of the reaction between CN(-) and four different diruthenium complexes of the type Ru(2)(L)(4)Cl where L = 2-CH(3)ap (2-(2-methylanilino)pyridinate anion), ap (2-anilinopyridinate anion), 2-Fap (2-(2-fluoroanilino)pyridinate anion), or 2,4,6-F(3)ap (2-(2,4,6-trifluoroanilino)pyridinate anion) are reported. Mono- and/or dicyano adducts of the type Ru(2)(L)(4)(CN) and Ru(2)(L)(4)(CN)(2) are found exclusively as reaction products when either the 2-CH(3)ap or the ap derivative is reacted with CN(-), but diruthenium complexes with formulations of the type Ru(2)(F(x)ap)(3)[mu-(o-NC)F(x-1)ap](mu-CN) or Ru(2)(F(x)ap)(4)(mu-CN)(2) (x = 1 or 3) are also generated when Ru(2)(Fap)(4)Cl or Ru(2)(F(3)ap)(4)Cl is reacted with CN(-). More specifically, four products formulated as Ru(2)(Fap)(4)(CN), Ru(2)(Fap)(4)(CN)(2), Ru(2)(Fap)(3)[mu-(o-NC)ap](mu-CN), and Ru(2)(Fap)(4)(mu-CN)(2) can be isolated from a reaction of CN(-) with the Fap derivative, but the exact type and yield of these compounds depend on the temperature at which the experiment is carried out. In the case of the F(3)ap derivative, the only diruthenium complex isolated from the reaction mixture has the formulation Ru(2)(F(3)ap)(3)[mu-(o-NC)F(2)ap](mu-CN) and this compound has structural, electrochemical, and spectroscopic properties quite similar to that of previously characterized Ru(2)(F(5)ap)[mu-(o-NC)F(4)ap](mu-CN). Both the mono- and dicyano derivatives synthesized in this study possess the isomer type of their parent chloro complexes. The Ru-Ru bond lengths of Ru(2)(ap)(4)(CN) and Ru(2)(2-CH(3)ap)(4)(CN) are longer than those of Ru(2)(ap)(4)Cl and Ru(2)(CH(3)ap)(4)Cl, respectively, and this is accounted for by the strong sigma-donor properties of the CN(-) ligand as compared to Cl(-). The Ru-C bonds in Ru(2)(ap)(4)(CN)(2) are significantly shorter than those in Ru(2)(ap)(4)(CN), thus revealing a greatly enhanced Ru-CN interaction in the dicyano adduct, a result which is also indicated by the fact that nu(CN) in Ru(2)(ap)(4)(CN)(2) is 50 cm(-1) higher than nu(CN) in Ru(2)(ap)(4)(CN). Although both (4,0) Ru(2)(ap)(4)(CN)(2) and (3,1) Ru(2)(Fap)(4)(CN)(2) possess the same formulation, there are clear structural differences between the two complexes and this can be explained by the fact that the two cyano derivatives possess a different binding symmetry of the bridging ligands. Each mono- and dicyano adduct was electrochemically investigated in CH(2)Cl(2) containing TBAP as supporting electrolyte. Ru(2)(ap)(4)(CN), Ru(2)(CH(3)ap)(4)(CN), and Ru(2)(Fap)(4)(CN) undergo one reduction and two oxidations. The two dicyano adducts of the ap and Fap derivatives are characterized by two reductions and one oxidation. The potentials of these processes are all negatively shifted in potential by 400-720 mV with respect to half-wave potentials for the same redox couples of the monocyano derivatives, with the exact value depending upon the specific redox reaction.     

Rare tetranuclear mixed-valent [Mn(II)2Mn(IV)2] clusters as building blocks for extended networks

We report the synthesis of a series of mixed valence Mn(II/IV) tetranuclear clusters [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(EtOH)(6)Br(2)]Br(2) (), [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(H(2)O)(2)Cl(4)].2EtOH.H(2)O (.2EtOH.H(2)O), [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(heedH(2))(2)](ClO(4))(4) (), [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(MeCN)(2)(H(2)O)(2)(bpy)(2)](ClO(4))(4) () and [Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(bpy)(2)Br(4)].2MeOH (.2MeOH). Clusters are constructed from the tripodal ligand N,N-bis(2-hydroxyethyl)ethylene diamine (heedH(2)) and represent rare examples of tetranuclear Mn clusters possessing the linear trans zig-zag topology, being the first Mn(II/IV) mixed-valent clusters of this type. The molecular clusters can then be used as building blocks in tandem with the (linear) linker dicyanamide ([N(CN)(2)](-), dca(-)) for the formation of a novel extended network {[Mn(II)(2)Mn(IV)(2)O(2)(heed)(2)(H(2)O)(2)(MeOH)(2)(dca)(2)]Br(2)}(n) (), which exhibits a rare form of the 2D herring bone topology.     

Metal carbonyl derivatives of sulfur-containing quinones and hydroquinones: synthesis, structures, and electrochemical properties

The reaction of CpMoMn(mu-S(2))(CO)(5), 1, with 1,4-benzoquinone in the presence of irradiation with visible light yielded the quinonedithiolato complex CpMoMn(CO)(5)(mu-S(2)C(6)H(2)O(2)), 2. The new complex CpMoMn(CO)(5)(mu-S(2)C(6)Cl(2)O(2)) (4) was synthesized similarly from 1 and 2,3-dichloro-1,4-benzoquinone. Compounds 2 and 4 were reduced with hydrogen to yield the hydroquinone complexes CpMoMn(CO)(5)[mu-S(2)C(6)H(2)(OH)(2)], 3, and CpMoMn(CO)(5)[mu-S(2)C(6)Cl(2)(OH)(2)], 5. UV-vis irradiation of solutions of Fe(2)(CO)(6)(mu-S(2)) and 1,4-benzoquinone yielded the hydroquinone complex Fe(2)(CO)(6)[mu-S(2)C(6)H(2)(OH)(2)], 6. Compound 6 was oxidized to the quinone complex Fe(2)(CO)(6)(mu-S(2)C(6)H(2)O(2)), 7, by using 2,3-dichloro-5,6-dicyano-1,4-benzoquinone. Substitution of the CO ligands on 6 by PPh(3) yielded the derivatives Fe(2)(CO)(5)(PPh(3))[mu-S(2)C(6)H(2)(OH)(2)], 8, and Fe(2)(CO)(4)(PPh(3))(2)[mu-S(2)C(6)H(2)(OH)(2)], 9. The electrochemical properties of 3, 5, 6, 8, and 9 were measured by cyclic voltammetry. The molecular structure of each of the new compounds 2-9 was established by single-crystal X-ray diffraction analyses.     

Disulfides of manganese carbonyl. Synthesis of Mn(2)(CO)(7)(mu-S2) and its reactions with tertiary phosphines and arsines

The reaction of Mn(2)(CO)(9)(NCMe) with thiirane yielded the sulfidomanganese carbonyl compounds Mn(2)(CO)(7)(mu-S(2)), 2, Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)), 3, and Mn(4)(CO)(14)(NCMe)(mu(3)-S(2))(mu(4)-S(2)), 4, by transfer of sulfur from the thiirane to the manganese complex. Compound 3 was obtained in better yield from the reaction of 2 with CO, and compound 4 is obtained from the reaction of 2 with NCMe. The reaction of 2 with PMe(2)Ph yielded the tetramanganese disulfide Mn(4)(CO)(15)(PMe(2)Ph)(2)(mu(3)-S)(2), 5, and S=PMe(2)Ph. The reaction of 5 with PMe(2)Ph yielded Mn(4)(CO)(14)(PMe(2)Ph)(3)(mu(3)-S)(2), 6, by ligand substitution. The reaction of 2 with AsMe(2)Ph yielded the new complexes Mn(4)(CO)(14)(AsMe(2)Ph)(2)(mu(3)-S(2))(2), 7, Mn(4)(CO)(14)(AsMe(2)Ph)(mu(3)-S(2))(mu(4)-S(2)), 8, Mn(6)(CO)(20)(AsMe(2)Ph)(2)(mu(4)-S(2))(3), 9, and Mn(2)(CO)(6)(AsMe(2)Ph)(mu-S(2)), 10. Reaction of 2 with AsPh(3) yielded the monosubstitution derivative Mn(2)(CO)(6)(AsPh(3))(mu-S(2)), 11. Reaction of 7 with PMe(2)Ph yielded Mn(4)(CO)(15)(AsMe(2)Ph)(2)(mu(3)-S)(2), 12. The phosphine analogue of 7, Mn(4)(CO)(14)(PMe(2)Ph)(2)(mu(3)-S(2))(2), 13, was prepared from the reaction of Mn(2)(CO)(9)(PMe(2)Ph) with Me(3)NO and thiirane. Compounds 2-9 and 11-13 were characterized by single-crystal X-ray diffraction. Compound 2 contains a disulfido ligand that bridges two Mn(CO)(3) groups that are joined by a Mn-Mn single bond, 2.6745(5) A in length. A carbonyl ligand bridges the Mn-Mn bond. Compounds 3 and 4 contain four manganese atoms with one triply bridging and one quadruply bridging disulfido ligand. Compounds 5 and 6 contain four manganese atoms with two triply bridging sulfido ligands. Compound 9 contains three quadruply bridging disulfido ligands imbedded in a cluster of six manganese atoms.     

Substitution chemistry of MM quadruply bonded complexes (M = Mo or W) supported by the anion of 2-hydroxy-6-methylpyridine

The compounds M(2)(mhp)(4), where M = Mo or W and mhp is the anion formed from deprotonation of 2-hydroxy-6-methylpyridine, are shown to react with carboxylic acids RCOOH to give an equilibrium mixture of products M(2)(O(2)CR)(n)(mhp)(4-n) where R = 2-thienyl and phenyl. The equilibrium can be moved in favor of M(2)(O(2)CR)(4) by the addition of excess acid or by the favorable crystallization of these products. The latter provides a facile synthesis of the W(2)(O(2)CR)(4) compound where R = 9-anthracene. Reactions involving 2,4,6-triisopropyl benzoic acid, TiPBH, yield M(2)(TiPB)(2)(mhp)(2) compounds as thermodynamic products. Reactions involving Me(3)OBF(4) (1 and 2 equiv.) yield the complexes Mo(2)(mhp)(3)(CH(3)CN)(2)BF(4) and Mo(2)(mhp)(2)(CH(3)CN)(4)(BF(4))(2), respectively. The latter compound has been structurally characterized and shown to have mirror symmetry with two cis mhp ligands: MoMo = 2.1242(5) A, Mo-O = 2.035(2) A, Mo-N(mhp) = 2.161(2) A, and Mo-N(CH(3)CN) = 2.160(3) and 2.170(3) A. Reactions involving Mo(2)(mhp)(3)(CH(3)CN)(2)(2+) and Mo(2)(mhp)(2)(CH(3)CN)(4)(2+) with (n)Bu(4)NO(2)CMe (1 and 2 equiv.) yield the complexes Mo(2)(mhp)(3)(O(2)CMe) and Mo(2)(mhp)(2)(O(2)CMe)(2) which are shown to be kinetically labile to ligand scrambling. Reactions between Mo(2)(mhp)(3)(CH(3)CN)(2)(+)BF(4)(-) (2 equiv.) and [(n)Bu(4)N(+)](2)[O(2)C-X-CO(2)](2-) yielded dimers of dimers [Mo(2)(mhp)(3)](2)(micro-O(2)C-X-CO(2)] where X = nothing, 2,5- or 3,4-thienyl and 1,4-C(6)H(4). Reactions between Mo(2)(mhp)(2)(CH(3)CN)(4)(2+)(BF(4)(-))(2) and tetra-n-butylammonium oxalate and terephthalate yield compounds [Mo(mhp)(2)bridge](n) which by MALDI-TOF MS are proposed to be a mixture of molecular squares (n = 4) and triangles (n = 3) along with minor products of [Mo(2)(mhp)(3)](2)(bridge) and Mo(2)(mhp)(4) that arise from ligand scrambling.     

Hexa- and octanuclear iron(III) salicylaldoxime clusters

The syntheses, structures and magnetic properties of six iron complexes stabilised with the derivatised salicylaldoxime ligands Me-saoH(2) (2-hydroxyethanone oxime) and Et-saoH(2) (2-hydroxypropiophenone oxime) are discussed. The four hexanuclear and two octanuclear complexes of formulae [Fe(8)O(2)(OMe)(4)(Me-sao)(6)Br(4)(py)(4)]·2Et(2)O·MeOH (1·2Et(2)O·MeOH), [Fe(8)O(2)(OMe)(3.85)(N(3))(4.15)(Me-sao)(6)(py)(2)] (2), [Fe(6)O(2)(O(2)CPh-4-NO(2))(4)(Me-sao)(2)(OMe)(4)Cl(2)(py)(2)] (3), [Fe(6)O(2)(O(2)CPh-4-NO(2))(4)(Et-sao)(2)(OMe)(4)Cl(2)(py)(2)]·2Et(2)O·MeOH (4·2Et(2)O·MeOH), [HNEt(3)](2)[Fe(6)O(2)(Me-sao)(4)(SO(4))(2)(OMe)(4)(MeOH)(2)] (5) and [HNEt(3)](2)[Fe(6)O(2)(Et-sao)(4)(SO(4))(2)(OMe)(4)(MeOH)(2)] (6) all are built from a series of edge-sharing [Fe(4)(μ(4)-O)](10+) tetrahedra. Complexes 1 and 2 display a new μ(4)-coordination mode of the oxime ligand and join a small group of Fe-phenolic oxime complexes with nuclearity greater than six.     

Hydrocarbon oxidation by Bis-mu-oxo manganese dimers: electron transfer,hydride transfer,and hydrogen atom transfer mechanisms

Described here are oxidations of alkylaromatic compounds by dimanganese mu-oxo and mu-hydroxo dimers [(phen)(2)Mn(IV)(mu-O)(2)Mn(IV)(phen)(2)](4+) ([Mn(2)(O)(2)](4+)), [(phen)(2)Mn(IV)(mu-O)(2)Mn(III)(phen)(2)](3+) ([Mn(2)(O)(2)](3+)), and [(phen)(2)Mn(III)(mu-O)(mu-OH)Mn(III)(phen)(2)](3+) ([Mn(2)(O)(OH)](3+)). Dihydroanthracene, xanthene, and fluorene are oxidized by [Mn(2)(O)(2)](3+) to give anthracene, bixanthenyl, and bifluorenyl, respectively. The manganese product is the bis(hydroxide) dimer, [(phen)(2)Mn(III)(mu-OH)(2)Mn(II)(phen)(2)](3+) ([Mn(2)(OH)(2)](3+)). Global analysis of the UV/vis spectral kinetic data shows a consecutive reaction with buildup and decay of [Mn(2)(O)(OH)](3+) as an intermediate. The kinetics and products indicate a mechanism of hydrogen atom transfers from the substrates to oxo groups of [Mn(2)(O)(2)](3+) and [Mn(2)(O)(OH)](3+). [Mn(2)(O)(2)](4+) is a much stronger oxidant, converting toluene to tolyl-phenylmethanes and naphthalene to binaphthyl. Kinetic and mechanistic data indicate a mechanism of initial preequilibrium electron transfer for p-methoxytoluene and naphthalenes because, for instance, the reactions are inhibited by addition of [Mn(2)(O)(2)](3+). The oxidation of toluene by [Mn(2)(O)(2)](4+), however, is not inhibited by [Mn(2)(O)(2)](3+). Oxidation of a mixture of C(6)H(5)CH(3) and C(6)H(5)CD(3) shows a kinetic isotope effect of 4.3 +/- 0.8, consistent with C-H bond cleavage in the rate-determining step. The data indicate a mechanism of initial hydride transfer from toluene to [Mn(2)(O)(2)](4+). Thus, oxidations by manganese oxo dimers occur by three different mechanisms: hydrogen atom transfer, electron transfer, and hydride transfer. The thermodynamics of e(-), H(*), and H(-) transfers have been determined from redox potential and pK(a) measurements. For a particular oxidant and a particular substrate, the choice of mechanism is influenced both by the thermochemistry and by the intrinsic barriers. Rate constants for hydrogen atom abstraction by [Mn(2)(O)(2)](3+) and [Mn(2)(O)(OH)](3+) are consistent with their 79 and 75 kcal mol(-)(1) affinities for H(*). In the oxidation of p-methoxytoluene by [Mn(2)(O)(2)](4+), hydride transfer is thermochemically 24 kcal mol(-)(1) more facile than electron transfer; yet the latter mechanism is preferred. Thus, electron transfer has a substantially smaller intrinsic barrier than does hydride transfer in this system.     

Mixed-metal assemblies containing multiply bonded dirhenium species linked through thiocyanate- and cyanide-containing bridging units

The lability of the terminal Re-Cl bond that is cis to the bridging CO ligand in the edge-sharing bioctahedral complexes Re(2)(mu-Cl)(mu-CO)(mu-PP)(2)Cl(3)(L), where PP = Ph(2)PC(=CH(2))PPh(2) (dppE) when L = CO (1) and PP = Ph(2)PCH(2)PPh(2) (dppm) when L = CO (2) or XyINC (3), has been exploited in the preparation of mixed-metal Re(4)Pd(2), Re(2)Ag, Re(2)W, Re(2)Pt, and Re(2)Rh assemblies, in which the dirhenium units are bound to the other metals through NCS or CN bridges. These complexes, which retain the Re=Re bonds of the parent dirhenium complexes, comprise the novel centrosymmetric complex [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)(mu-NCS)](2)Pd(2)(mu-SCN)(mu-NCS)Cl(2) (9), and the trimetallic complexes Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)Ag(CN)] (10), Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)W(CO)(5)] (11), [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)Pt(CN)(CN-t-Bu)(2)]]PF(6) (12), [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-N(CN)(2))Rh(CO)(PPh(3))(2)]]O(3)SCF(3) (13), and Re(2)Cl(3)(mu-dppm)(2)(CO)(2)[(mu-NC)W(CO)(5)] (16). The identities of 9 and 16 have been established by X-ray crystallography, and all complexes characterized by IR and NMR spectroscopy and cyclic voltammetry. The reactions of the dicarbonyl complex 1, and the isomeric pair of complexes Re(2)Cl(4)(mu-dppm)(2)(CO)(CNXyl), which have edge-sharing bioctahedral (ESBO) (3) and open bioctahedral (OBO) (4) geometries, with Na[N(CN)(2)] and K[C(CN)(3)] have been used to prepare complexes in which the uncoordinated CN groups have the potential to coordinate other mono- or dimetal units to form extended arrays. The complexes which have been prepared and characterized are the monosubstituted species Re(2)Cl(3)(X)(mu-dppE)(2)(CO)(2) (X = N(CN)(2) (14) or C(CN)(3) (15)) and Re(2)Cl(3)(X)(mu-dppm)(2)(CO)(CNXyl) (X = N(CN)(2) (17) or C(CN)(3) (18) with ESBO structures; X = N(CN)(2) (19) or C(CN)(3) (20) with OBO structures), of which 15, 18, and 20 have been characterized by single-crystal X-ray structure determinations. The substitutional labilities of the Re-Cl bonds in the complexes Re(2)Cl(4)(mu-dppm)(2)(CO) (5), Re(2)Cl(4)(mu-dppm)(2)(CNXyl) (6), and Re(2)Cl(4)(mu-dppm)(2) (7) toward Na[N(CN)(2)] and K[C(CN)(3)] have also been explored and the complexes Re(2)Cl(3)(X)(mu-dppm)(2)(CO) (X = N(CN)(2) (21) or C(CN)(3) (22)), Re(2)Cl(3)(X)(mu-dppm)(2)(CNXyl) (X = N(CN)(2) (23) or C(CN)(3) (24)), Re(2)Cl(2)(X)(2)(mu-dppm)(2)(CNXyl) (X = N(CN)(2) (25) or C(CN)(3) (26)), Re(2)[N(CN)(2)](4)(mu-dppm)(2) (27), and Re(2)[C(CN)(3)](4)(mu-dppm)(2) (28) isolated in good yield. Single-crystal X-ray structure determinations of 24, 26, and 27 have shown that the Re-Re triple bonds present in the starting materials 5-7 are retained in these products.     

A novel high-spin tridecanuclear Ni(II) cluster with an azido-bridged core exhibiting disk-like topology

A high-spin tridecanuclear Ni(II) cluster, [Ni(II)(13)(N(3))(18)(dpo)(4)(Hdpo)(2)(H(2)hpo)(4)(H(2)O)(MeOH)] [Ni(II)(13)(N(3))(18)(dpo)(4)(Hdpo)(2)(H(2)hpo)(4)(H(2)O)(2)] (1) (Hdpo = 1-(dimethylamino)propan-2-one oxime and H(2)hpo = 1-(hydroxyamino)propan-2-one oxime) with a purely azido-bridged core, is reported with dominant ferromagnetic coupling between Ni(II) ions. The latter molecule exhibits a unique planar core topology with the largest N(3)(-):Ni(II) ratio reported to date.     

Syntheses, characterization, and photochemical properties of amidate-bridged Pt(bpy) dimers tethered to Ru(bpy)3(2+) derivatives

Amidate-bridged diplatinum(II) entities [Pt(2)(bpy)(2)(μ-amidato)(2)](2+) (amidate = pivalamidate and/or benzamidate; bpy = 2,2'-bipyridine) were covalently linked to one or two Ru(bpy)(3)(2+)-type derivatives. An amide group was introduced at the periphery of Ru(bpy)(3)(2+) derivatives to give metalloamide precursors [Ru(bpy)(2)(BnH)](2+) (abbreviated as RuBnH, n = 1 and 2), where deprotonation of amide BnH affords the corresponding amidate Bn, B1H = 4-(4-carbamoylphenyl)-2,2'-bipyridine, and B2H = ethyl 4'-[N-(4-carbamoylphenyl)carbamoyl]-2,2'-bipyridine-4-carboxylate. From a 1:1:1 reaction of [Pt(2)(bpy)(2)(μ-OH)(2)](NO(3))(2), RuBnH, and pivalamide, trinuclear complexes [Pt(2)(bpy)(2)(μ-RuBn)(μ-pivalamidato)](4+) (abbreviated as RuBn-Pt(2)) were isolated and characterized. Tetranuclear complexes [Pt(2)(bpy)(2)(μ-RuBn)(2)](6+) (abbreviated as (RuBn)(2)-Pt(2)) were separately prepared and characterized in detail. The quenching of the triplet excited state of the Ru(bpy)(3)(2+) derivative (i.e., Ru*(bpy)(3)(2+)) upon tethering the Pt(2)(bpy)(2)(μ-amidato)(2)(2+) moiety is strongly enhanced in RuB1-Pt(2) and (RuB1)(2)-Pt(2), while it is only slightly enhanced in RuB2-Pt(2) and (RuB2)(2)-Pt(2). These are partly explained by the driving forces for the electron transfer from the Ru*(bpy)(3)(2+) moiety to the Pt(2)(bpy)(2)(μ-amidato)(2)(2+) moiety (ΔG°(ET)); the ΔG°(ET) values for RuB1-Pt(2), (RuB1)(2)-Pt(2), RuB2-Pt(2), and (RuB2)(2)-Pt(2) are estimated as -0.01, 0.00, +0.22, and +0.28 eV, respectively. The considerable difference in the photochemical properties of the B1- and B2-bridged systems were further examined based on the emission decay and transient absorption measurements, which gave results consistent with the above conclusions.     

Copper(I) cyanide networks: synthesis, luminescence behavior and thermal analysis. Part 1. Diimine ligands

Metal-organic networks of CuCN with diimines (L) = pyrazine (Pyz), 2-aminopyrazine (PyzNH(2)), quinoxaline (Qox), phenazine (Phz), 4,4'-bipyridyl (Bpy), pyrimidine (Pym), 2-aminopyrimidine (PymNH(2)), 2,4-diaminopyrimidine (Pym(NH(2))(2)), 2,4,6-triaminopyrimidine (Pym(NH(2))(3)), quinazoline (Qnz), pyridazine (Pdz), and phthalazine (Ptz) were studied. Open reflux reactions produced complexes (CuCN)(2)(L) for L = Qox, Phz, Bpy, PymNH(2), Pym(NH(2))(2), Qnz, and Pdz and (CuCN)(3)(L) complexes for L = Pyz, PyzNH(2), Qox, Bpy, Pym(NH(2))(3), and Pdz. Also produced were (CuCN)(3)(Pyz)(2), (CuCN)(PyzNH(2)), (CuCN)7(Pym)(2), (CuCN)(5)(Qnz)(2) and (CuCN)(5)(Ptz)(2). X-ray structures are presented for (CuCN)(2)(Pdz), (CuCN)(2)(PymNH(2)), and (CuCN)(7)(Pym)(2). Hydrothermal reactions yielded additional X-ray structures of (CuCN)(2)(PyzNH(2)), (CuCN)(3)(Pym(NH(2))(2)), (CuCN)(4)(Qnz), a second (CuCN)(2)(Pdz) phase, (CuCN)(5)(Pdz)2, (CuCN)(2)(Ptz), and (CuCN)(7)(Ptz)2. Structural trends, including cuprophilic interactions and cyano-bridged Cu(2)(CN)(2) dimer formation, are discussed. Particularly short Cu...Cu interactions are noted for the novel 4- and 5-coordinate Cu(2)(CN)(2) dimers. Thermal analyses show that most of the complexes decompose with loss of L around 160-180 degrees C. Luminescence behavior is relatively weak in the products.     

1,1-Diamino-2,2-dintroethene (FOX-7) in copper and nickel diamine complexes and copper FOX-7

1,1-Diamino-2,2-dinitroethene (FOX-7) reacts readily with copper nitrate in an aqueous solution of potassium hydroxide to form pea green Cu(FOX)(2)(H(2)O)(2) (5). FOX-7 complexes of copper and nickel supported by a variety of diamines including Cu(en)(2)(FOX)(2)(H(2)O) (1), Cu(pn)(2)(FOX)(2) (2), Cu(bipy)(FOX)(2)(H(2)O)(4) (3a), Cu(bipy)(2)(FOX)(2)(H(2)O)(2.5) (3b), Cu(bipy)(FOX)(2)(DMSO)(2)·2DMSO (3c), Cu(phen)(3)(FOX)(2)(H(2)O)(3) (4), (Ni)(2)(phen)(6)(FOX)(4)(NO(3))(3)(H(2)O)(2) (6), and Ni(bipy)(3)(FOX)(2)(H(2)O)(4) (7a) were obtained via metathesis reactions with potassium-FOX (K-FOX). Surprisingly FOX-7, in the presence of Ni(II) and bipyridyl in a mixed solvent of methanol and dimethyl sulfoxide, gave a chelated FOX carbamate anion resulting in the compound Ni(bipy)(2)(FOX-CO(2))·(DMSO) (7b). All metal salts were characterized by infrared, elemental analysis, and differential scanning calorimetry (DSC). Single-crystal X-ray diffraction structures were obtained for compounds 1, 2, 3c, 6, and 7b.     

Substituents dependent capability of bis(ruthenium-dioxolene-terpyridine) complexes toward water oxidation

The bridging ligand, 1,8-bis(2,2':6',2'-terpyrid-4'-yl)anthracene (btpyan) was synthesized by the Miyaura-Suzuki cross coupling reaction of anthracenyl-1,8-diboronic acid and 4'-triflyl-2,2':6'-2'-terpyridine in the presence of Pd(PPh(3))(4) (5 mol%) with 68% in yield. Three ruthenium-dioxolene dimers, [Ru(2)(OH)(2)(dioxolene)(2)(btpyan)](0) (dioxolene = 3,6-di-tert-butyl-1,2-benzosemiquinone ([1](0)), 3,5-dichloro-1,2-benzosemiquinone ([2](0)) and 4-nitro-1,2-benzosemiquinone ([3](0))) were prepared by the reaction of [Ru(2)Cl(6)(btpyan)](0) with the corresponding catechol. The electronic structure of [1](0) is approximated by [Ru(II)(2)(OH)(2)(sq)(2)(btpyan)](0) (sq = semiquinonato). On the other hand, the electronic states of [2](0) and [3](0) are close to [Ru(III)(2)(OH)(2) (cat)(2)(btpyan)](0) (cat = catecholato), indicating that a dioxolene having electron-withdrawing groups stabilizes [Ru(III)(2)(OH)(2)(cat)(2)(btpyan)](0) rather than [Ru(II)(2)(OH)(2)(sq)(2)(btpyan)](0) as resonance isomers. No sign was found of deprotonation of the hydroxo groups of [1](0), whereas [2](0) and [3](0) showed an acid-base equilibrium in treatments with t-BuOLi followed by HClO(4). Furthermore, controlled potential electrolysis of [1](0) deposited on an ITO (indium-tin oxide) electrode catalyzed the four-electron oxidation of H(2)O to evolve O(2) at potentials more positive than +1.6 V (vs. SCE) at pH 4.0. On the other hand, the electrolysis of [2](0) and [3](0) deposited on ITO electrodes did not show catalytic activity for water oxidation under similar conditions. Such a difference in the reactivity among [1](0), [2](0) and [3](0) is ascribed to the shift of the resonance equilibrium between [Ru(II)(2)(OH)(2)(sq)(2)(btpyan)](0) and [Ru(III)(2)(OH)(2)(cat)(2)(btpyan)](0).     

Variation of heterometallic structural motifs based on [W(CN)8]3- anions and Mn(II) ions as a function of synthetic conditions

Reactions of [W(CN)(8)](3-/4-) anions with complexes of Mn(2+) ion with tridentate organic ligand 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) lead to a series of heterobimetallic complexes. The crystal structures of these compounds are derived from the same basic structural fragment, namely a W(2)Mn(2) square constructed of alternating cyanide-bridged W and Mn ions. In [Mn(II)(tptz)(OAc)(H(2)O)(2)](2){[Mn(II)(tptz)(MeOH)(1.58)(H(2)O)(0.42)](2)[W(V)(CN)(8)](2)}.5 MeOH.9.85 H(2)O (3), isolated molecular squares are co-crystallized with mononuclear cationic Mn(II) complexes. The structure of {[Mn(II)(tptz)(MeOH)](2)[W(IV)(CN)(8)].2 MeOH}(infinity) (4) is based on an infinite chain of vertex-sharing squares, while {[Mn(II) (2)(tptz)(2)(MeOH)(3)(OAc)][W(V)(CN)(8)].3.5 MeOH0.25 H(2)O}(infinity) (5) and {[Mn(II) (2)(tptz)(2)(MeOH)(3)W(V)(CN)(8)][Mn(II)(tptz)(MeOH)W(V)(CN)(8)].2 H(2).OMeOH}(8) (7) are derived from such an infinite chain by removing one of the W-C[triple bond]N-Mn linkages in each of the squares. The decanuclear cluster [Mn(II) (6)(tptz)(6)(MeOH)(4)(DMF)(2)W(V) (4)(CN)(32)].8.2 H(2)O.2.3 MeOH (6) is a truncated version of structure 4 and consists of three vertex-sharing W(2)Mn(2) squares. The structure of [Mn(II)(tptz)(MeOH)(NO(3))](2)[Mn(II)(tptz)(MeOH) (DMF)](2)[W(V)(CN)(8)](2).6 MeOH (8) consists of a hexanuclear cluster, in which the central W(2)Mn(2) square is extended by two Mn side-arms attached via CN(-) ligands to the W corners of the square. The magnetic behavior of these heterobimetallic complexes (except for 4) is dominated by antiferromagnetic coupling between Mn(II) and W(V) ions mediated by cyanide bridges. Compounds 3, 6, and 8 exhibit high spin ground states of S=4, 13, and 9, respectively, while 5 and 7 exhibit behavior typical of a ferrimagnetic chain with alternating spin centers. Complex 4 contains diamagnetic W(IV) centers but holds promise as a potential photomagnetic solid.     

New Cu(II) complexes based on the hydroxo-bridged dinuclear [Cu(OH)2Cu] units: step-like di- and trimerizations of [Cu(OH)2Cu] units

Four new Cu(II) complexes {[Cu(4)(bpy)(4)(OH)(4)(H(2)O)(2)]}(NO(3))(2)(C(7)H(5)O(2))(2)·6H(2)O 1, {[Cu(4)(bpy)(4)(OH)(4)(H(2)O)(2)]}(NO(3))(2)(C(5)H(6)O(4))·8H(2)O 2, {[Cu(4)(bpy)(4)(OH)(4)(H(2)O)(2)]}(C(5)H(6)O(4))(2)·16H(2)O 3 and {[Cu(6)(bpy)(6)(OH)(6)(H(2)O)(2)]}(C(8)H(7)O(2))(6)·12H(2)O 4 were synthesized (bpy = 2,2'-bipyridine, H(2)(C(5)H(6)O(4)) = glutaric acid, H(C(7)H(5)O(2)) = benzoic acid, H(C(8)H(7)O(2)) = phenyl acetic acid). The building units in 1-3 are the tetranuclear [Cu(4)(bpy)(4)(H(2)O)(2)(μ(2)-OH)(2)(μ(3)-OH)(2)](4+) complex cations, and in 4 the hexanuclear [Cu(6)(bpy)(6)(H(2)O)(2)(μ(2)-OH)(2)(μ(3)-OH)(4)](6+) complex cations, respectively. The tetra- and hexanuclear cluster cores [Cu(4)(μ(2)-OH)(2)(μ(3)-OH)(2)] and [Cu(6)(μ(2)-OH)(2)(μ(3)-OH)(4)] in the complex cations could be viewed as from step-like di- and trimerization of the well-known hydroxo-bridged dinuclear [Cu(2)(μ(2)-OH)(2)] entities via the out-of-plane Cu-O(H) bonds. The complex cations are supramolecularly assembled into (4,4) topological networks via intercationic ππ stacking interactions. The counteranions and lattice H(2)O molecules are sandwiched between the 2D cationic networks to form hydrogen-bonded networks in 1-3, while the phenyl acetate anions and the lattice H(2)O molecules generate 3D hydrogen-bonded anionic framework to interpenetrate with the (4,4) topological cationic networks with the hexanuclear complex cations in the channels. The ferromagnetic coupling between Cu(II) ions in the [Cu(4)(μ(2)-OH)(2)(μ(3)-OH)(2)] cores of 1-3 is significantly stronger via equatorial-equatorial OH(-) bridges than via equatorial-apical ones. The outer and the central [Cu(2)(OH)(2)] unit within the [Cu(6)(μ(2)-OH)(2)(μ(3)-OH)(4)] cluster cores in 4 exhibit weak ferromagnetic and antiferromagnetic interactions, respectively. Results about i.r. spectra, thermal and elemental analyses are presented.     

Comproportionation of cationic and anionic tungsten complexes having an N-heterocyclic carbene ligand to give the isolable 17-electron tungsten radical CpW(CO)2(IMes)(•)

A series consisting of a tungsten anion, radical, and cation, supported by the N-heterocyclic carbene 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) and spanning formal oxidation states W(0), W(I), and W(II), has been synthesized, isolated, and characterized. Reaction of the hydride CpW(CO)(2)(IMes)H with KH and 18-crown-6 gives the tungsten anion [CpW(CO)(2)(IMes)](-)[K(18-crown-6)](+). Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) in MeCN (0.2 M (n)Bu(4)N(+)PF(6)(-)) is fully reversible (E(1/2) = -1.65 V vs Cp(2)Fe(+?/0)) at all scan rates, indicating that CpW(CO)(2)(IMes)(?) is a persistent radical. Hydride transfer from CpW(CO)(2)(IMes)H to Ph(3)C(+)PF(6)(-) in MeCN affords [cis-CpW(CO)(2)(IMes)(MeCN)](+)PF(6)(-). Comproportionation of [CpW(CO)(2)(IMes)](-) with [CpW(CO)(2)(IMes)(MeCN)](+) gives the 17-electron tungsten radical CpW(CO)(2)(IMes)(?). This complex shows paramagnetically shifted resonances in the (1)H NMR spectrum and has been characterized by IR spectroscopy, low-temperature EPR spectroscopy, and X-ray diffraction. CpW(CO)(2)(IMes)(?) is stable with respect to disproportionation and dimerization. NMR studies of degenerate electron transfer between CpW(CO)(2)(IMes)(?) and [CpW(CO)(2)(IMes)](-) are reported. DFT calculations were carried out on CpW(CO)(2)(IMes)H, as well as on related complexes bearing NHC ligands with N,N' substituents Me (CpW(CO)(2)(IMe)H) or H (CpW(CO)(2)(IH)H) to compare to the experimentally studied IMes complexes with mesityl substituents. These calculations reveal that W-H homolytic bond dissociation energies (BDEs) decrease with increasing steric bulk of the NHC ligand, from 67 to 64 to 63 kcal mol(-1) for CpW(CO)(2)(IH)H, CpW(CO)(2)(IMe)H, and CpW(CO)(2)(IMes)H, respectively. The calculated spin density at W for CpW(CO)(2)(IMes)(?) is 0.63. The W radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?) are calculated to form weak W-W bonds. The weakly bonded complexes [CpW(CO)(2)(IMe)](2) and [CpW(CO)(2)(IH)](2) are predicted to have W-W BDEs of 6 and 18 kcal mol(-1), respectively, and to dissociate readily to the W-centered radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?).