Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

Linear hybrid aminoborane/phosphinoborane chains: synthesis, proton-hydride interactions, and thermolysis behavior

The reaction of the lithiated phosphine-borane adducts Li[PPhR.BH(3)] or Li[CH(2)-PR(2).BH(3)] with Me(2)NH.BH(2)Cl afforded the hybrid linear species Me(2)NH-BH(2)-PPhR-BH(3) (1, R = Ph; 2, R = H) or Me(2)NH-BH(2)-CH(2)-PR(2)-BH(3) (3, R = Ph; 4, R = Me). Single-crystal X-ray diffraction studies on 1 and 3, the first for linear hybrid aminoborane/phosphinoborane adducts, confirmed the expected four-coordinate N-B-P-B and N-B-C-P-B frameworks. In addition, interactions between the protic N-H and hydridic B-H hydrogen atoms resulted in short intermolecular H...H contacts for 1, whereas 3 was found to possess an exceptionally short intramolecular H...H distance of 1.95 A. Solution and solid state infrared studies on 3 and 4 also suggest that these dihydrogen interactions were maintained even in dilute solution. Hydrogen bond strengths in the range of 7.9 to 10.9 kJ mol(-1) indicate the presence of a relatively weak interaction. The thermal and catalytic dehydrocoupling reactivities of 1-4 were also investigated. Chain cleavage reactions were observed for 1 and 2 upon thermolysis at 130 degrees C to afford species such as Me(2)NH.BH(3), [Me(2)N-BH(2)](2), PhPRH.BH(3) (R = Ph, H), PhPRH (R = Ph, H), Ph(2)PH-BH(2)-PPh(2)-BH(3), and also the low molecular weight polyphosphinoborane [PhPH-BH(2)](n) (M(w) approximately 5000). Similar products were observed for the attempted catalytic dehydrocoupling reactions but under milder reaction conditions (50 degrees C). Thermolysis of 3 at 130 degrees C yielded the six-membered ring [BH(2)-CH(2)-PPh(2)](2) (5), which presumably results from the dissociation of Me(2)NH.BH(3) from 3. Thermolysis of 4 at 90 degrees C afforded Me(2)NH.BH(3) and Me(3)P.BH(3), in addition to a product tentatively assigned as [BH(2)-CH(2)-PMe(2)](2) (6).     

Synthesis and dehydrocoupling reactivity of iron and ruthenium phosphine-borane complexes

The Fe and Ru phosphine-borane complexes CpM(CO)2PPh2 x BH3 (1, M = Fe, 4, M = Ru) were synthesized utilizing the reaction of the phosphine-borane anion Li[PPh2 x BH3] with the iodo complexes CpM(CO)2I. The Fe complex 1 reacted with PMe3 to yield CpFe(CO)(PMe3)(PPh2 x BH3) (2) and CpFe(PMe3)2(PPh2 x BH3) (3) whereas the Ru species 4 gave only CpRu(CO)(PMe3)(PPh2 x BH3) (5). The complexes 1-5 were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, MS, IR and X-ray crystallography for 1 to 4, and EA for 1, 2 and 4. The reactivity of 1 and 4 towards PPh2H x BH3 was explored. Although no stoichiometric reactions were detected under mild conditions, both 1 and 4 were found to function as dehydrocoupling catalysts to afford Ph2PH x BH2 x PPh2 x BH3 in the melt at elevated temperature (120 degrees C). The carbonyl Fe2(CO)9 also functioned as a dehydrocoupling catalyst under similar conditions. Complex 1 and Fe2(CO)9 represent the first reported active Fe complexes for the catalytic dehydrocoupling of phosphine-borane adducts.     

Transition metal-catalyzed formation of boron-nitrogen bonds: catalytic dehydrocoupling of amine-borane adducts to form aminoboranes and borazines

A mild, catalytic dehydrocoupling route to aminoboranes and borazine derivatives from either primary or secondary amine-borane adducts has been developed using late transition metal complexes as precatalysts. The adduct Me(2)NH.BH(3) thermally eliminates hydrogen at 130 degrees C in the condensed phase to afford [Me(2)N-BH(2)](2) (1). Evidence for an intermolecular process, rather than an intramolecular reaction to form Me(2)N=BH(2) as an intermediate, was forthcoming from "hot tube" experiments where no appreciable dehydrocoupling of gaseous Me(2)NH.BH(3) was detected in the range 150-450 degrees C. The dehydrocoupling of Me(2)NH.BH(3) was found to be catalyzed by 0.5 mol % [Rh(1,5-cod)(mu-Cl)](2) in solution at 25 degrees C to give 1 quantitatively after ca. 8 h. The rate of dehydrocoupling was significantly enhanced if the temperature was raised or if the catalyst loading was increased. The catalytic activity of various other transition metal complexes (Ir, Ru, Pd) for the dehydrocoupling of Me(2)NH.BH(3) was also demonstrated. This new catalytic method was extended to other secondary adducts RR'NH.BH(3) which afforded the dimeric species [(1,4-C(4)H(8))N-BH(2)](2) (2) and [PhCH(2)(Me)N-BH(2)](2) (3) or the monomeric aminoborane (i)Pr(2)N=BH(2) (4) under mild conditions. A new synthetic approach to the linear compounds R(2)NH-BH(2)-NR(2)-BH(3) (5: R = Me; 6: R = 1,4-C(4)H(8)) was developed and subsequent catalytic dehydrocoupling of these species yielded the cyclics 1 and 2. The species 5 and 6 are postulated to be intermediates in the formation of 1 and 2 directly from the catalytic dehydrocoupling of the adducts R(2)NH.BH(3). The catalytic dehydrocoupling of NH(3).BH(3), MeNH(2).BH(3), and PhNH(2).BH(3) at 45 degrees C to give the borazine derivatives [RN-BH](3) (10: R = H; 11: R = Me; 12: R = Ph) was demonstrated. TEM analysis of the contents of the reaction solution for the [Rh(1,5-cod)(mu-Cl)](2) catalyzed dehydrocoupling of Me(2)NH.BH(3) together with Hg poisoning experiments suggested a heterogeneous catalytic process involving Rh(0) colloids.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Synthesis and structural characterisation of group 10 metal(II) gallyl complexes: analogies with platinum diboration catalysts?

Reactions of the anionic gallium(i) heterocycle, [:Ga{[N(Ar)C(H)](2)}](-) (Ar = C(6)H(3)Pr(i)(2)-2,6), with a variety of mono- and bidentate phosphine, tmeda and 1,5-cyclooctadiene (COD) complexes of group 10 metal dichlorides are reported. In most cases, salt elimination occurs, affording either mono(gallyl) complexes, trans-[MCl{Ga{[N(Ar)C(H)](2)}}(PEt(3))(2)] (M = Ni or Pd) and cis-[PtCl{Ga{[N(Ar)C(H)](2)}}(L)] (L = R(2)PCH(2)CH(2)PR(2), R = Ph (dppe) or cyclohexyl (dcpe)), or bis(gallyl) complexes, trans-[M{Ga{[N(Ar)C(H)](2)}}(2)(PEt(3))(2)] (M = Ni, Pd or Pt), cis-[Pt{Ga{[N(Ar)C(H)](2)}}(2)(PEt(3))(2)], cis-[M{Ga{[N(Ar)C(H)](2)}}(2)(L)] (M = Ni, Pd or Pt; L = dppe, Ph(2)CH(2)PPh(2) (dppm), tmeda or COD). The crystallographic and spectroscopic data for the complexes show that the trans-influence of the gallium(i) heterocycle lies in the series, B(OR)(2) > H(-) > PR(3) approximately [:Ga{[N(Ar)C(H)](2)}](-) > Cl(-). Comparisons between the reactivity of one complex, [Pt{Ga{[N(Ar)C(H)](2)}}(2)(dppe)], with that of closely related platinum bis(boryl) complexes indicate that the gallyl complex is not effective for the catalytic or stoichiometric gallylation of alkenes or alkynes. The phosphaalkyne, Bu(t)C[triple bond, length as m-dash]P, does, however, insert into one gallyl ligand of the complex, leading to the novel, crystallographically characterised P,N-gallyl complex, [Pt{Ga{[N(Ar)C(H)](2)}}{Ga{PC(Bu(t))C(H)[N(Ar)]C(H)N(Ar)}}(dppe)]. An investigation into the mechanism of this insertion reaction has been undertaken.     

Microwave synthesis of mono- and bis-tetrazolato complexes via 1,3-dipolar cycloaddition of organonitriles with platinum(II)-bound azides

[2 + 3] Cycloaddition reactions of the diazidoplatinum(II) complexes cis-[Pt(N3)2(PPh3)2] 1 and cis-[Pt(N3)2(2,2'-bipy)] 4 with organonitriles NCR 2 give the bis(tetrazolato) complexes trans-[Pt(N4CR)2(PPh3)2] 3 [R = Me (3a), Et (3b), Pr (3c), Ph (3d), 4-ClC6H4 (3e)] and cis-[Pt(N4CR)2(2,2'-bipy)] 5 [R = Me (5a), Et (5b), Pr (5c), Ph (5d)]. The reaction of cis-[Pt(N3)2(PPh3)2] I with propionitrile also affords, apart from 3b, the unexpected mixed cyano-tetrazolato complex trans-[Pt(CN)(5-ethyltetrazolato)(PPh3)2] 3b' which is derived from the reaction of the bis(tetrazolato) 3b with propionitrile, with concomitant formation of 5-ethyl-1H-tetrazole, via a suggested unusual oxidative addition of the nitrile to PtII. All these reactions are greatly accelerated by microwave irradiation and this method also shows a higher selectivity in the case of the reaction of propionitrile with 1, leading only to the formation of 3b. All the complexes obtained were characterized by IR, 1H, 13C and 31P[1H] (for complexes 3) NMR spectroscopies, FAB-MS and elemental analyses. Complexes 3b', 3d, 3e and 5d were also characterized by X-ray structural analyses.     

Novel tailoring reaction for two adjacent coordinated nitriles giving platinum 1,3,5-triazapentadiene complexes

The tailoring reaction of the two adjacent nitrile ligands in cis-[PtCl(2)(RCN)(2)] (R = Me, Et, CH(2)Ph, Ph) and [Pt(tmeda)(EtCN)(2)][SO(3)CF(3)](2) (8.(OTf)(2); tmeda = N,N,N',N'-tetramethylethylenediamine) upon their interplay with N,N'-diphenylguanidine (DPG; NH=C(NHPh)(2)), in a 1:2 molar ratio gives the 1,3,5-triazapentadiene complexes [PtCl(2){NHC(R)NHC(R)=NH}] (1-4) and [Pt(tmeda){NHC(Et)NHC(Et)NH}][SO(3)CF(3)](2) (10.(OTf)(2)), respectively. In contrast to the reaction of 8.(OTf)(2) with NH=C(NHPh)(2), interaction of 8.(OTf)(2) with excess gaseous NH(3) leads to formation of the platinum(II) bis(amidine) complex cis-[Pt(tmeda){NH=C(NH(2))Et}(2)][SO(3)CF(3)](2) (9.(OTf)(2)). Treatment of trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) with 2 equiv of NH=C(NHPh)(2) in EtCN (R = Et) and CH(2)Cl(2) (R = CH(2)Ph, Ph) solutions at 20-25 degrees C leads to [PtCl{NH=C(R)NC(NHPh)=NPh}(RCN)] (11-13). When any of the trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) complexes reacts in the corresponding nitrile RCN with 4 equiv of DPG at prolonged reaction time (75 degrees C, 1-2 days), complexes containing two bidentate 1,3,5-triazapentadiene ligands, i.e. [Pt{NH=C(R)NC(NHPh)=NPh}(2)] (14-16), are formed. Complexes 14-16 exhibit strong phosphorescence in the solid state, with quantum yields (peak wavelengths) of 0.39 (530 nm), 0.61 (460 nm), and 0.74 (530 nm), respectively. The formulation of the obtained complexes was supported by satisfactory C, H, and N elemental analyses, in agreement with FAB-MS, ESI-MS, IR, and (1)H and (13)C{(1)H} NMR spectra. The structures of 1, 2, 4, 11, 13, 14, 9.(picrate)(2), and 10.(picrate)(2) were determined by single-crystal X-ray diffraction.     

Formation of diphenylphosphanylbutadienyl complexes by insertion of two P-coordinated alkynylphosphanes into a PtbondC6F5 bond: detection of intermediate and reaction products

The reactions between cis-[M(C(6)F(5))(2)(PPh(2)CtriplebondCR)(2)] (M=Pt, Pd; R=Ph, tBu, Tol 2, 3) or cis-[Pt(C(6)F(5))(2)(PPh(2)CtriplebondCR)(PPh(2)CtriplebondCtBu)] (R=Ph 4, Tol 5) and cis-[Pt(C(6)F(5))(2)(thf)(2)] 1 have been investigated. Whereas [M](PPh(2)CtriplebondCtBu)(2) ([M]=cis-M(C(6)F(5))(2)) is inert towards 1, the analogous reactions starting from [M](PPh(2)CtriplebondCR)(2) or [Pt](PPh(2)CtriplebondCR)(PPh(2)CtriplebondCtBu) (R=Ph, Tol) afford unusual binuclear species [Pt(C(6)F(5))(S)mu-[C(R')dbondC(PPh(2))C(PPh(2))doublebondC(R)(C(6)F(5))]M(C(6)F(5))(2)] (R=R'=Ph, Tol, M=Pt 6 a,c, M=Pd 7 a,c; M=Pt, R'=tBu, R=Ph 8, Tol 9) containing a bis(diphenylphosphanyl)butadienyl bridging ligand formed by an unprecedented sequential insertion reaction of two P-coordinated PPh(2)CtriplebondCR ligands into a PtbondC(6)F(5) bond. Although in solution the presence of coordinated solvent S (S=(thf)(x)(H(2)O)(y)) in 6, 7 is suggested by NMR spectroscopy, X-ray diffraction analyses of different crystals of the mixed complex [Pt(C(6)F(5))mu-[C(tBu)doublebondC(PPh(2))C(PPh(2))doublebondC(Tol)(C(6)F(5))]Pt(C(6)F(5))(2)] 9 unequivocally establish that in the solid state the steric crowding of the new diphenylbutadienyl ligand formed stabilizes an unusual coordinatively unsaturated T-shaped 3-coordinated platinum(II) center. Structure determinations of the mononuclear precursors cis-[Pt(C(6)F(5))(2)(PPh(2)CtriplebondCR)(2)] (R=Ph, tBu, Tol) have been carried out to evaluate the factors affecting the insertion processes. The reactions of the platinum complexes 6 towards neutral ligands (L=CO, py, PPh(2)H, CNtBu) in a 1:1 molar ratio afford related diplatinum derivatives 10-13, whereas treatment with CNtBu (1:2 molar ratio) or 2,2'-bipy (1:1 molar ratio) results in the opening of the chelating ring to give cis,cis-[Pt(C(6)F(5))(L)(2)mu-[1-kappaC(1):2-kappaPP'-C(R)doublebondC(PPh(2))C(PPh(2))doublebondC(R)(C(6)F(5))]Pt(C(6)F(5))(2)] (14, 15). The unsaturated or solvento complexes are unstable in solution evolving firstly, through an unexpected formal 4-1 R (Ph, Tol) migration, to the intermediate diphosphanylbutadienyl isomer derivatives [Pt(C(6)F(5))(S)mu-[C(C(6)F(5))doublebondC(PPh(2))C(PPh(2))doublebondC(R)(2)]M(C(6)F(5))(2)] (16, 18) (X-ray, R=Ph, M=Pt) and, finally, to 1-pentafluorophenyl-2,3-bis(diphenylphosphanyl)naphthalene mononuclear complexes (17, 19) by annulation of a phenyl or tolyl group.     

Oxidative addition of the imidazolium cation to zerovalent Ni, Pd, and Pt: a combined density functional and experimental study

Oxidative addition of different imidazolium cations to zerovalent group 10 metals, to afford heterocyclic carbene complexes, has been investigated by both density functional theory (DFT) and experimental studies. The theoretical analysis shows that addition of imidazoliums to Pt(0) and Ni(0) is more exothermic than to Pd(0), and Ni(0) is predicted to react with a much lower barrier than either Pt(0) or Pd(0). Strongly basic supporting ligands on the metal, as well as cis-chelating ligands, increase the exothermicity of the reaction and also lower the activation barrier. The addition of 2-H imidazoliums is easier and more exothermic than addition of 2-alkylimidazoliums, and a halo-imidazolium is expected to further lower the barrier to oxidative addition and increase the exothermicity. The DFT results show that all three of the metals should be able to oxidatively add imidazolium cations under appropriate conditions. Experimental studies confirmed that oxidative addition is possible, and a number of Pt- and Pd-carbene complexes were prepared via oxidative addition of imidazolium salts to M(0) precursors. Most significantly, oxidative addition of 2-H azolium salts was found to readily occur, and the reaction of 1,3-dimethylimidazolium tetrafluoroborate with Pt(PPh(3))(2) and Pt(PCy(3))(2) affords [PtH(dmiy)(PPh(3))(2)]BF(4) (10) and [PtH(dmiy)(PCy(3))(2)]BF(4) (11), while reaction between 3,4-dimethylthiazolium tetrafluoroborate and Pt(PCy(3))(2) yields [PtH(dmty)(PCy(3))(2)]BF(4) (12) (dmiy = 1,3-dimethylimidazolin-2-ylidene, dmty = 3,4-dimethylthiazolin-2-ylidene). Addition of 2-iodo-1,3,4,5-tetramethylimidazolium tetrafluoroborate to Pt(PPh(3))(4) or Pd(dcype)(dba) yields [PtI(tmiy)(PPh(3))(2)]BF(4) (9) and [PdI(tmiy)(dcype)]BF(4) (14), respectively (tmiy = 1,3,4,5-tetramethylimidazolin-2-ylidene, dcype = 1,3-bis(dicyclohexylphosphino)ethane)). X-ray crystal structures are reported for complexes 9 and 11 (cis and trans). These studies clearly show for the first time that oxidative addition of imidazolium and thiazolium cations is possible, and the results are discussed in terms of the ramifications for catalysis in imidazolium-based ionic liquids with both carbene-based and non-carbene-based complexes.     

Stable diplatinum complexes with functional thiolato bridges from dialkylation of [Pt2(mu-S)2(P-P)2] [P-P=2 x PPh3, Ph2P(CH2)3PPh2

The normally robust monoalkylated complexes [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) can be activated towards further alkylation. Dialkylated complexes [Pt(2)(mu-SR)(2)(P-P)(2)](2+) (P-P=2 x PPh(3), Ph(2)P(CH(2))(3)PPh(2)) can be stabilized and isolated by the use of electron-rich and aromatic halogenated substituents R [e.g. 3-(2-bromoethyl)indole and 2-bromo-4'-phenylacetophenone] and 1,3-bis(diphenylphosphino)propane [Ph(2)P(CH(2))(3)PPh(2) or dppp] which enhances the nucleophilicity of the {Pt(2)(mu-S)(2)} core. This strategy led to the activation of [Pt(2)(mu-S)(mu-SR)(PPh(3))(4)](+) towards R-X as well as isolation and crystallographic elucidation of [Pt(2)(mu-SC(10)H(10)N)(2)(PPh(3))(4)](PF(6))(2) (2a), [Pt(2)(mu-SCH(2)C(O)C(6)H(4)C(6)H(5))(2)(PPh(3))(4)](PF(6))(2) (2b), and a range of functionalized-thiolato bridged complexes such as [Pt(2)(mu-SR)(2)(dppp)(2)](PF(6))(2) [R= -CH(2)C(6)H(5) (8a), -CH(2)CHCH(2) (8b) and -CH(2)CN (8c)]. The stepwise alkylation process is conveniently monitored by Electrospray Ionisation Mass Spectrometry, allowing for a direct qualitative comparison of the nucleophilicity of [Pt(2)(mu-S)(2)(P-P)(2)], thereby guiding the bench-top synthesis of some products observed spectroscopically.     

Chemical functionality of poly(methylenephosphine): phosphine-borane adducts and methylphosphonium ionomers

The chemical functionality of poly(methylenephosphine) n-Bu[MesP-CPh(2)](n)H () is examined in reactions with two isoelectronic species, namely BH(3) and CH(3)(+). The potential reactivity of polymer is modelled by examining the reactivity of molecular phosphines bearing similar substituents as the polymer. In particular, the phosphine-borane adducts Mes(Me)P(BH(3))-CPh(2)H () and Mes(Me)P(BH(3))-CPh(2)SiMe(2)H () are prepared from the reaction of BH(3).SMe(2) with Mes(Me)P-CPh(2)H () or Mes(Me)P-CPh(2)SiMe(2)H (), respectively. Treating with MeOTf affords the methylated model compound, [Mes(Me)(2)P-CPh(2)H]OTf (). X-Ray crystal structures are reported for each model compound. The reaction of n-Bu[MesP-CPh(2)](n)H (M(n) = 3.89 x 10(4), PDI = 1.34) with BH(3).SMe(2) affords the phosphine-borane polymer n-Bu[MesP(BH(3))-CPh(2)](n)H () (M(n) = 4.13 x 10(4), PDI = 1.26). In contrast, methylation of phosphine polymer gives n-Bu[MesP-CPh(2)](x)-/-[MesP(Me)-CPh(2)](y)H.(OTf)(y) () where approximately 50% of the phosphine moieties are methylated (from (31)P NMR).     

Reactions of platinum cluster ions with benzene

In this work, the cation and anion products of the reactions between platinum clusters produced by laser ablation and the benzene molecules seeded in argon have been studied using a high-resolution reflectron time-of-flight mass spectrometer (RTOFMS). The dominant cation products are [C(6n)H(6n - k)](+) and [Pt(m)(C(6)H(6))(n)](+) complexes, while the dominant anion products are dehydrogenated species, [C(6)H(5)PtH](-), [PtC(12)H(k)](-) and [Pt(m)C(6)H(4) . . . (C(6)H(6))(n)](-), etc. Some important intermediate structures ([PtC(6)H(6)](+), [Pt(C(6)H(6))(2)](+), [Pt(2)(C(6)H(6))(3)](+), [C(6)H(5)PtH](-), [Pt(2)C(6)H(4)](-), [Pt(3)C(6)H(4)](-) and [Pt(4)C(6)H(4)](-)) have been analyzed using density functional theory (DFT) calculations. Different reaction mechanisms are proposed for platinum cluster cations and anions with benzene, respectively.     

Biologically active platinum complexes containing 8-thiotheophylline and 8-(methylthio)theophylline

Complexes [Pt(mu-N,S-8-TT)(PPh(3))(2)](2) (1), [Pt(mu-S,N-8-TT)(PTA)(2)](2) (2), [Pt(8-TTH)(terpy)]BF(4) (3), cis-[PtCl(8-MTT)(PPh(3))(2)] (4), cis-[Pt(8-MTT)(2)(PPh(3))(2)] (5), cis-[Pt(8-MTT)(8-TTH)(PPh(3))(2)] (6), cis-[PtCl(8-MTT)(PTA)(2)] (7), cis-[Pt(8-MTT)(2)(PTA)(2)] (8), and trans-[Pt(8-MTT)(2)(py)(2)] (9) (8-TTH(2) = 8-thiotheophylline; 8-MTTH = 8-(methylthio)theophylline; PTA = 1,3,5-triaza-7-phosphaadamantane) are presented and studied by IR and multinuclear ((1)H, (31)P[(1)H]) NMR spectroscopy. The solid-state structure of 4 and 9 has been authenticated by X-ray crystallography. Growth inhibition of the cancer cells T2 and SKOV3 induced by the above new thiopurine platinum complexes has been investigated. The activity shown by complexes 4 and 9 was comparable with cisplatin on T2. Remarkably, 4 and 9 displayed also a valuable activity on cisplatin-resistant SKOV3 cancer cells.     

Bis(acetylacetonato)ruthenium(II) complexes containing alkynyldiphenylphosphines. Formation and redox behaviour of [Ru(acac)2(Ph2PC triple bond CR)2] (R=H, Me, Ph) complexes and the binuclear complex cis-[{Ru(acac)2}2(micro-Ph2PC triple bond CPPh2)}2

Two equivalents of Ph(2)PC triple bond CR (R=H, Me, Ph) react with thf solutions of cis-[Ru(acac)(2)(eta(2)-alkene)(2)] (acac=acetylacetonato; alkene=C(2)H(4), 1; C(8)H(14), 2) at room temperature to yield the orange, air-stable compounds trans-[Ru(acac)(2)(Ph(2)PC triple bond CR)(2)] (R=H, trans-3; Me=trans-4; Ph, trans-5) in isolated yields of 60-98%. In refluxing chlorobenzene, trans-4 and trans-5 are converted into the yellow, air-stable compounds cis-[Ru(acac)(2)(Ph(2)PC triple bond CR)(2)] (R=Me, cis-4; Ph, cis-5), isolated in yields of ca. 65%. From the reaction of two equivalents of Ph(2)PC triple bond CPPh(2) with a thf solution of 2 an almost insoluble orange solid is formed, which is believed to be trans-[Ru(acac)(2)(micro-Ph(2)PC triple bond CPPh(2))](n) (trans-6). In refluxing chlorobenzene, the latter forms the air-stable, yellow, binuclear compound cis-[{Ru(acac)(2)(micro-Ph(2)PC triple bond CPPh(2))}(2)] (cis-6). Electrochemical studies indicate that cis-4 and cis-5 are harder to oxidise by ca. 300 mV than the corresponding trans-isomers and harder to oxidise by 80-120 mV than cis-[Ru(acac)(2)L(2)] (L=PPh(3), PPh(2)Me). Electrochemical studies of cis-6 show two reversible Ru(II/III) oxidation processes separated by 300 mV, the estimated comproportionation constant (K(c)) for the equilibrium cis-6(2+) + cis6 <=> 2(cis-6(+)) being ca. 10(5). However, UV-Vis spectra of cis-6(+) and cis-6(2+), generated electrochemically at -50 degrees C, indicate that cis-6(+) is a Robin-Day Class II mixed-valence system. Addition of one equivalent of AgPF(6) to trans-3 and trans-4 forms the green air-stable complexes trans-3 x PF(6) and trans-4 x PF(6), respectively, almost quantitatively. The structures of trans-4, cis-4, trans-4 x PF(6) and cis-6 have been confirmed by X-ray crystallography.     

Direct addition of alcohols to organonitriles activated by ligation to a platinum(IV) center

Treatment of trans-[PtCl(4)(RCN)(2)] (R = Me, Et) with R'OH (R' = Me, Et, n-Pr, i-Pr, n-Bu) at 45 degrees C in all cases allowed the isolation of the trans-[PtCl(4)[(E)-NH=C(R)OR'](2)] imino ester complexes, while the reaction between cis-[PtCl(4)(RCN)(2)] and the least sterically hindered alcohols (methanol and ethanol) results in the formation of cis-[PtCl(4)[(E)-NH=C(R)OR'](2)] (R/R' = Me/Me) or trans-[PtCl(4)[(E)-NH=C(Et)OR'](2)] (R' = Me, Et), the latter being formed via thermal isomerization (ROH, reflux, 3 h) of the initially formed corresponding cis isomers. The reaction between alcohols R'OH and cis-[PtCl(4)(RCN)(2)] (R = Me, R' = Et, n-Pr, i-Pr, n-Bu; R = Et; R' = n-Pr, i-Pr, n-Bu), exhibiting greater R/R' steric congestion, allowed the isolation of cis-[PtCl(4)[(E)-NH=C(R)OR'][(Z)-NH=C(R)OR']] as the major products. The alcoholysis reactions of poorly soluble [PtCl(4)(RCN)(2)] (R = CH(2)Ph, Ph) performed under heterogeneous conditions, directly in the appropriate alcohol and for a prolonged time and, for R = Ph, with heating led to trans-[PtCl(4)[(E)-NH=C(R)OR'](2)] (R = CH(2)Ph, R' = Me, Et, n-Pr, i-Pr; R = Ph, R' = Me) isolated in moderate yields. In all of the cases, in contrast to platinum(II) systems, addition of R'OH to the organonitrile platinum(IV) complexes occurs under mild conditions and does not require a base as a catalyst. The formed isomerically pure (imino ester)Pt(IV) complexes can be reduced selectively, by Ph(3)P=CHCO(2)Me, to the corresponding isomers of (imino ester)Pt(II) species, exhibiting antitumor activity, without change in configuration of the imino ester ligands. Furthemore, the imino esters NH=C(R)OR' can be liberated from both platinum(IV) and platinum(II) complexes [PtCl(n)[H=C(R)OR'](2)] (n = 2, 4) by reaction with 1,2-bis(diphenylphosphino)ethane and pyridine, respectively. All of the prepared compounds were characterized by elemental analyses (C, H, N), FAB mass spectrometry, IR, and (1)H, (13)C[(1)H], and (195)Pt (metal complexes) NMR spectroscopies; the E and Z configurations of the imino ester ligands in solution were determined by observation of the nuclear Overhauser effect. X-ray structure determinations were performed for trans-[PtCl(4)[(E)-NH=C(Me)OEt](2)] (2), trans-[PtCl(4)[(E)-NH=C(Et)OEt](2)] (10), trans-[PtCl(4)[(E)-NH=C(Et)OPr-i](2)] (11), trans-[PtCl(4)[(E)-NH=C(Et)OPr-n](2)] (12), and cis-[PtCl(4)[(E)-NH=C(Et)OMe](2)] (14). Ab initio calculations have shown that the EE isomers are the most stable ones for both platinum(II) and platinum(IV) complexes, whereas the most stable configurations for the ZZ isomers are less stable than the respective EZ isomers, indicating an increase of the stability on moving from the ZZ to the EE configurations which is more pronounced for the Pt(IV) complexes than for the Pt(II) species.     

Reactions of acetonitrile coordinated to a nitrosylruthenium complex with H2O or CH(3)OH under mild conditions: structural characterization of imido-type complexes

The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) (bpy = 2,2'-bipyridine) in H(2)O at room temperature proceeded to afford two new nitrosylruthenium complexes. These complexes have been identified as nitrosylruthenium complexes containing the N-bound methylcarboxyimidato ligand, cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+), and methylcarboxyimido acid ligand, cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+), formed by an electrophilic reaction at the nitrile carbon of the acetonitrile coordinated to the ruthenium ion. The X-ray structure analysis on a single crystal obtained from CH(3)CN-H(2)O solution of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](PF(6))(3) has been performed: C(22)H(20.5)N(6)O(2)P(2.5)F(15)Ru, orthorhombic, Pccn, a = 15.966(1) A, b = 31.839(1) A, c = 11.707(1) A, V = 5950.8(4) A(3), and Z = 8. The structural results revealed that the single crystal consisted of 1:1 mixture of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+) and cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+) and the structural formula of this single crystal was thus [Ru(NO)(NH=C(OH(0.5))CH(3))(bpy)(2)](PF(6))(2.5). The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) in dry CH(3)OH-CH(3)CN at room temperature afforded a nitrosylruthenium complex containing the methyl methylcarboxyimidate ligand, cis-[Ru(NO)(NH=C(OCH(3))CH(3))(bpy)(2)](3+). The structure has been determined by X-ray structure analysis: C(25)H(29)N(8)O(18)Cl(3)Ru, monoclinic, P2(1)/c, a = 13.129(1) A, b = 17.053(1) A, c = 15.711(1) A, beta = 90.876(5) degrees, V = 3517.3(4) A(3), and Z = 4.     

Reactions of Li- and Yb-coordinated N,N'-bis(trimethylsilyl)-beta-diketiminates: one- and two-electron reductions, deprotonation, and C-N bond cleavage

The synthesis and characterisation of novel Li and Yb complexes is reported, in which the monoanionic beta-diketiminato ligand has been (i) reduced (SET or 2 [times] SET), (ii) deprotonated, or (iii) C-N bond-cleaved. Reduction of the lithium beta-diketiminate Li(L(R,R'))[L(R,R')= N(SiMe(3))C(R)CHC(R')N(SiMe(3))] with Li metal gave the dilithium derivative [Li(tmen)(mu-L(R,R'))Li(OEt(2))](R = R'= Ph; or, R = Ph, R[prime or minute]= Bu(t)). When excess of Li was used the dimeric trilithium [small beta]-diketiminate [Li(3)(L(R,R[prime or minute]))(tmen)](2)(, R = R'= C(6)H(4)Bu(t)-4 = Ar) was obtained. Similar reduction of [Yb(L(R,R'))(2)Cl] gave [Yb[(mu-L(R,R'))Li(thf)](2)](, R = R[prime or minute]= Ph; or, R = R'= C(6)H(4)Ph-4 = Dph). Use of the Yb-naphthalene complex instead of Li in the reaction with [Yb(L(Ph,Ph))(2)] led to the polynuclear Yb clusters [Yb(3)(L(Ph,Ph))(3)(thf)], [Yb(3)(L(Ph,Ph))(2)(dme)(2)], or [Yb(5)(L(Ph,Ph))(L(1))(L(2))(L(3))(thf)(4)] [L(1)= N(SiMe(3))C(Ph)CHC(Ph)N(SiMe(2)CH(2)), L(2)= NC(Ph)CHC(Ph)H, L(3)= N(SiMe(2)CH(2))] depending on the reaction conditions and stoichiometry. The structures of the crystalline complexes 4, 6x21/2(hexane), 5(C(6)D(6)), and have been determined by X-ray crystallography (and have been published).     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.