多维梯度折射率介质内辐射传递的扩散近似

推导多维梯度折射率介质内稳态辐射传递的扩散近似方程.使用有限元法对扩散近似进行离散和求解,利用两个二维半透明介质的稳态辐射传递问题验证该扩散近似的精度及适用性.算例考虑介质为均匀折射率及梯度折射率两种情况.利用扩散近似分别求解辐射平衡时的边界热流、介质内温度场分布,并与辐射传递方程的求解结果进行对比分析.结果表明:介质折射率变化、散射特性、光学厚度及散射反照率均直接影响扩散近似的精度;在光学厚及强散射条件下,该扩散近似可以作为一种快速算法应用于梯度折射率介质稳态辐射传递的求解.     

Hybrid finite volume/ finite element method for radiative heat transfer in graded index media

The rays propagate along curved path determined by the Fermat principle in the graded index medium. The radiative transfer equation in graded index medium (GRTE) contains two specific redistribution terms (with partial derivatives to the angular coordinates) accounting for the effect of the curved ray path. In this paper, the hybrid finite volume with finite element method (hybrid FVM/FEM) (P.J. Coelho, J. Quant. Spectrosc. Radiat. Transf., vol. 93, pp. 89–101, 2005) is extended to solve the radiative heat transfer in two-dimensional absorbing-emitting-scattering graded index media, in which the spatial discretization is carried out using a FVM, while the angular discretization is by a FEM. The FEM angular discretization is demonstrated to be preferable in dealing with the redistribution terms in the GRTE. Two stiff matrix assembly schemes of the angular FEM discretization, namely, the traditional assembly approach and a new spherical assembly approach (assembly on the unit sphere of the solid angular space), are discussed. The spherical assembly scheme is demonstrated to give better results than the traditional assembly approach. The predicted heat flux distributions and temperature distributions in radiative equilibrium are determined by the proposed method and compared with the results available in other references. The proposed hybrid FVM/FEM method can predict the radiative heat transfer in absorbing-emitting-scattering graded index medium with good accuracy.     

Meshless approach for coupled radiative and conductive heat transfer in one-dimensional graded index medium

A meshless local Petrov-Galerkin (MLPG) approach is employed for solving the coupled radiative and conductive heat transfer in a one-dimensional slab with graded index media. The angular distribution term in discrete ordinate equation of radiative transfer within a one-dimensional graded index slab is discretized by a step scheme, and the meshless approach for radiative transfer is based on the discrete ordinate equation. A moving least-squares approximation is used to construct the shape function. Two particular test cases for coupled radiative and conductive heat transfer within a one-dimensional graded index slab are examined to verify this new approximate method. The temperatures and the radiative heat fluxes are obtained. The results are compared with the other benchmark approximate solutions. By comparison, the results show that the MLPG approach has a good accuracy in solving the coupled radiative and conductive heat transfer in one-dimensional graded index media.     

Discontinuous finite element method for radiative heat transfer in semitransparent graded index medium

To avoid the complicated and time-consuming computation of curved ray trajectories, a discontinuous finite element method based on discrete ordinate equation is extended to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Two cases of radiative heat transfer in two-dimensional rectangular gray semitransparent graded index medium enclosed by opaque boundary are examined to verify this discontinuous finite element method. Special layered and radial graded index distributions are considered. The predicted dimensionless net radiative heat fluxes and dimensionless temperature distributions are determined by the discontinuous finite element method and compared with the results obtained by the curved Monte Carlo method in references. The results show that the discontinuous finite element method has a good accuracy in solving the multi-dimensional radiative transfer problem in a semitransparent graded index medium.     

Finite element method for modeling radiative transfer in semitransparent graded index cylindrical medium

Both Galerkin finite element method (GFEM) and least squares finite element method (LSFEM) are developed and their performances are compared for solving the radiative transfer equation of graded index medium in cylindrical coordinate system (RTEGC). The angular redistribution term of the RTEGC is discretized by finite difference approach and after angular discretization the RTEGC is formulated into a discrete-ordinates form, which is then discretized based on Galerkin or least squares finite element approach. To overcome the RTEGC-led numerical singularity at the origin of cylindrical coordinate system, a pole condition is proposed as a special mathematical boundary condition. Compared with the GFEM, the LSFEM has very good numerical properties and can effectively mitigate the nonphysical oscillation appeared in the GFEM solutions. Various problems of both axisymmetry and nonaxisymmetry, and with medium of uniform refractive index distribution or graded refractive index distribution are tested. The results show that both the finite element approaches have good accuracy to predict the radiative heat transfer in semitransparent graded index cylindrical medium, while the LSFEM has better numerical stability.     

半透明梯度折射率介质内辐射熵传递方程及其数值模拟

在非相干辐射条件下,基于Planck光谱辐射熵强度定义,导出半透明梯度折射率介质内光谱辐射熵传递方程,以及局部辐射熵产率理论表达式.基于离散坐标法对辐射熵传递方程进行数值求解.以一维半透明梯度介质平板为例,对辐射熵方程及其算法进行验证.平板整体无因次辐射熵产的计算结果与宏观热力学定律的结果一致.     

Finite element method for radiation heat transfer in multi-dimensional graded index medium

In graded index medium, ray goes along a curved path determined by Fermat principle, and curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectories, a finite element method based on discrete ordinate equation is developed to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Two particular test problems of radiative transfer are taken as examples to verify this finite element method. The predicted dimensionless net radiative heat fluxes are determined by the proposed method and compared with the results obtained by finite volume method. The results show that the finite element method presented in this paper has a good accuracy in solving the multi-dimensional radiative transfer problem in semitransparent graded index medium.     

求解辐射传递的非结构混合有限体积／有限元法

本文给了一种适用于任意非结构网格的有限体积/有限元法的混合算法用于求解多维半透明吸收、发射、散射性灰矩形介质内的辐射传递.该方法使用有限元法进行角度离散,有限体积法进行空间离散.与基于辐射传递离散坐标方程的方法不同的是,该方法在迭代求解的过程中,针对每一个空间体元,所有角度方向的辐射强度同时耦合求出.通过两个算例验证了该解法的正确性.     

Least-squares finite element method for radiation heat transfer in graded index medium

To avoid the complicated and time-consuming computation of curved ray trajectories, a least-squares finite element method based on discrete ordinate equation is extended to solve the radiative transfer problem in a multi-dimensional semitransparent graded index medium. Four cases of radiative heat transfer are examined to verify this least-squares finite element method. Linear and nonlinear graded index are considered. The predicted dimensionless net radiative heat fluxes are determined by the least-squares finite element method and compared with the results obtained by other methods. The results show that the least-squares finite element method is stable and has a good accuracy in solving the multi-dimensional radiative transfer problem in a semitransparent graded index medium, while the Galerkin finite element method sometimes suffers from nonphysical oscillations.     

Finite element approach for radiative transfer in multi-layer graded index cylindrical medium with Fresnel surfaces

Because the optical plane defined by the incidence and reflection direction at a cylindrical surface has a complicated relation with the local azimuthal angle and zenith angle in the traditional cylindrical coordinate system, it is difficult to deal with the specular reflective boundary condition in the solution of the traditional radiative transfer equation for cylindrical system. In this paper, a new radiative transfer equation for graded index medium in cylindrical system (RTEGCN) is derived based on a newly defined cylindrical coordinate system. In this new cylindrical coordinate system, the optical plane defined by the incidence and reflection direction is just the isometric plane of the local azimuthal angle, which facilitates the RTEGCN in dealing with cylindrical specular reflective boundaries. A least squares finite element method (LSFEM) is developed for solving radiative transfer in single and multi-layer cylindrical medium based on the discrete ordinates form of the RTEGCN. For multi-layer cylindrical medium, a radial basis function interpolation method is proposed to couple the radiative intensity at the interface between two adjacent layers. Various radiative transfer problems in both single and multi-layer cylindrical medium are tested. The results show that the present finite element approach has good accuracy to predict the radiative heat transfer in multi-layer cylindrical medium with Fresnel surfaces.     

Benchmark numerical solutions for radiative heat transfer in two-dimensional medium with graded index distribution

In graded index media, the ray goes along a curved path determined by Fermat principle. Generally, the curved ray trajectory in graded index media is a complex implicit function, and the curved ray tracing is very difficult and complex. Only for some special refractive index distributions, the curved ray trajectory can be expressed as a simple explicit function. Two important examples are the layered and the radial graded index distributions. In this paper, the radiative heat transfer problems in two-dimensional square semitransparent with layered and radial graded index distributions are analyzed. After deduction of the ray trajectory, the radiative heat transfer problems are solved by using the Monte Carlo curved ray-tracing method. Some numerical solutions of dimensionless net radiative heat flux and medium temperature are tabulated as the benchmark solutions for the future development of approximation techniques for multi-dimensional radiative heat transfer in graded index media.     

Radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems

In graded index medium, the ray goes along a curved path determined by Fermat principle, and the curved ray-tracing is very difficult and complex. To avoid the complicated and time-consuming computation of curved ray trajectory, the methods not based on ray-tracing technique need to be developed for the solution of radiative transfer in graded index medium. For this purpose, in this paper the streaming operator along a curved ray trajectory in original radiative transfer equation for graded index medium is transformed and expressed in spatial and angular ordinates and the radiative transfer equation for graded index medium in cylindrical and spherical coordinate systems are derived. The conservative and the non-conservative forms of radiative transfer equation for three-dimensional graded index medium are given, which can be used as base equations to develop the numerical simulation methods, such as finite volume method, discrete ordinates method, and finite element method, for radiative transfer in graded index medium in cylindrical and spherical coordinate systems.     

Temperature field of radiative equilibrium in a two-dimensional graded index medium with gray boundaries

In this paper, a numerical method is presented for the study of the radiative transfer in a two-dimensional graded index semitransparent medium with diffuse gray boundaries. The numerical method is a combination of the linear refractive index bar model, the discrete curved ray-tracing technique and the pseudo source adding method (LRIB-CRTP). In the traditional ray-tracing technique, it is difficult to deal with the diffuse gray boundary while solving the radiative transfer. Using the pseudo source adding method, the diffuse gray boundary of the medium can be treated as a black boundary. We have also studied the radiative equilibrium temperature field of the medium and analyzed the influence of some parameters involved. The results show that the directional discrete number is important for the medium having a large absorption coefficient. The results also show that the refractive index distribution greatly influences the temperature field, whereas the linear absorption coefficient distribution has little influence on the temperature field.     

Comparison of ray-tracing methods for semitransparent slab with variable spatial refractive index

The ray-tracing technique has the main difficulty in solving radiative transfer in the medium with variable spatial refractive index. Recently, three methods have been developed for the application of the ray-tracing technique in those medium. To compare and discuss the numerical characteristics of those methods, a semitransparent slab with variable spatial refractive index is taken as an example, and the reflectivity and the transmissivity of the slab are computed by the curved ray-tracing method, the multi-layer approach, and the discrete curved ray-tracing method, respectively. As the result, it is shown that, the discrete curved ray-tracing method gives the result with good accuracy and convergence characteristics than the multi-layer approach. Due to accounting physically inexistent reflection on the interface between sublayers, the multi-layer approach converges slowly.     

配置点谱方法求解一维圆柱梯度折射率介质中的辐射传热

发展一种配置点谱方法，计算包含半透明各向异性散射介质的圆柱系统中的辐射传热.介质具有梯度折射率，并且散射反照率随空间位置变化.通过与精确解或其他方法的结果对比，验证配置点谱方法的准确性.结果表明：配置点谱方法仅采用少量的节点数就可以得到准确的辐射热流量.     

Verification of numerical simulation method for entropy generation of radiation heat transfer in semitransparent medium

The numerical simulation method of radiative entropy generation in participating media presented by Caldas and Semiao [Entropy generation through radiative transfer in participating media: analysis and numerical computation. JQSRT 2005;96:423-37] is extended to analyze the radiative entropy generation in the enclosures filled with semitransparent media. A discrete ordinates method is used to solve radiative transfer equation and radiative entropy generation. Two different examples are employed to verify the numerical simulation method of radiative entropy generation in the enclosure. Numerical results of dimensionless radiative entropy generation of enclosure are identical to that of entire thermodynamics analysis for the enclosure system. This numerical simulation method can be used in the entropy generation analysis of high-temperature systems such as boilers and furnaces, in which radiation is the dominant mode of heat transfer.     

Prediction of radiative heat transfer in 3D complex geometries using the unstructured control volume finite element method

In this paper, a 3D algorithm for the treatment of radiative heat transfer in emitting, absorbing, and scattering media is developed. The numerical approach is based on the utilization of the unstructured control volume finite element method (CVFEM) which, to the knowledge of the authors, is applied for the first time to simulate radiative heat transfer in participated media confined in 3D complex geometries. This simulation makes simultaneously the use of the merits of both the finite element method and the control volume method. Unstructured 3D triangular element grids are employed in the spatial discretization and azimuthal discretization strategy is employed in the angular discretization. The general discretization equation is presented and solved by the conditioned conjugate gradient squared method (CCGS). In order to test the efficiency of the developed method, several 3D complex geometries including a hexahedral enclosure, a 3D equilateral triangular enclosure, a 3D L-shaped enclosure and 3D elliptical enclosure are examined. The results are compared with the exact solutions or published references and the accuracy obtained in each case is shown to be highly satisfactory. Moreover, this approach required a less CPU time and iterations compared with those of even parity formulation of the discrete ordinates method.     

吸收-透射界面下正弦折射率介质内辐射换热

对具有吸收-透射性边界面的梯度折射率半透明介质层,建立了介质内热辐射传递与边界面辐射换热的数理模型,并采用数值弯曲光线跟踪法求解介质内的热辐射传递。通过数值模拟,分析了正弦折射率下,边界面的反射特性、吸收率以及介质层光学厚度对介质内热辐射平衡温度场及热流分布的影响。结果表明,边界面的反射特性与吸收率对介质内辐射换热均有重要影响,吸收率的影响与边界面反射特性、介质层光学厚度及环境条件相关,呈现特征不同的作用。     

Monte Carlo discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A Monte Carlo discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index, in which the Monte Carlo method is combined with the discrete curved ray-tracing method. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions and the dimensionless radiative heat flux are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the Monte Carlo discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index. The curved ray trajectory is locally treated as straight line and the complicated and time-consuming computation of ray trajectory is cut down. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.