Preparation of single‐walled carbon nanotubes‐induced poly(p‐oxybenzoyl) crystals

Crystallization of oligomers was applied for the preparation of single‐walled carbon nanotubes (SWNTs)/poly(p‐oxybenzoyl) (POB) crystals using SWNTs as a nucleating agent. Polymerization conditions were investigated to induce the crystallization of POB oligomers through SWNTs. SWNTs/POB plate‐like or lozenge‐shaped crystals were successfully prepared by direct polymerization of p‐hydroxybenzoic acid (HBA) in a mixed solvent of DMF/Py with TsCl in the presence of functionalized SWNTs. The size of the plate‐like crystals were ～200 nm to 3 μm. The crystals consisted of some layers, ～3 nm thick plates. Model reactions showed that esterification reactions proceed between functionalized SWNTs and HBA monomers in the polymerization system. The obtained crystals exhibited unique morphology and high crystallinity, producing a novel SWNT/POB hybrid. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1265–1277, 2008     

Selective preparation of poly(p‐oxybenzoyl) by using fractional polycondensation

Selective preparation of poly(p‐oxybenzoyl) (POB) in the copolymerization system of p‐acetoxybenzoic acid (p‐ABA) and m‐acetoxybenzoic acid (m‐ABA) was examined by using reaction‐induced crystallization of oligomers. Polymer crystals mainly composed of p‐oxybenzoyl moiety were precipitated when the content of m‐ABA in the feed was 30 mol %. The formation of the polymer crystals was attributed to both the reactivity of monomer and the phase‐separation behavior of oligomer. Reactivity of p‐ABA was twice higher than that of m‐ABA, and thereby, the homo‐oligomers of p‐oxybenzoyl moiety were more rapidly formed in solution than do co‐oligomers at the early stage in polymerization. They were selectively precipitated by crystallization to form crystals because of low miscibility. Co‐oligomers containing m‐oxybenzoyl moiety were also formed in solution, but they were unable to be phase‐separated because of higher miscibility. Further polycondensation occurred between oligomers in the precipitated crystals, leading to the formation of POB. This polymerization proceeded with selecting certain monomers by crystallization and afforded a new methodology for fractional polycondensation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2732–2743, 2006     

Dimer effect on fractional polycondensation of poly(p‐oxybenzoyl)

Selective preparation of poly(p‐oxybenzoyl) (POB) crystals was examined from the viewpoint of a dimer effect on fractional polycondensation. Four different copolymerization systems were chosen as the combinations of p‐acetoxybenzoic acid (p‐ABA), m‐acetoxybenzoic acid (m‐ABA), and their dimers. The crystals obtained from the copolymerization of the dimer of p‐ABA (p‐ABAD) and m‐ABA contained only 3.1 mol % of m‐oxybenzoyl moiety even at high content of m‐oxybenzoyl moiety in feed (χ_f) of 40 mol %. p‐Oxybenzoyl homo‐oligomers were more rapidly formed from p‐ABAD in the solution than from p‐ABA, and they were crystallized to form the crystals with segregating co‐oligomers. While co‐oligomers containing more m‐oxybenzoyl moiety were formed in the solution, afterward they were unable to be phase‐separated because of higher miscibility. The further polycondensation proceeded in the precipitated crystal, and finally the POB crystal was selectively formed. Lower polymerization temperature and concentration enhanced the fractionability, and the POB crystals containing less than 1 mol % m‐oxybenzoyl moiety were prepared at χ_f of 30 mol %, 270 °C, and a concentration of 0.5%. The dimer effect on the fractional polycondensation was clearly observed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1598–1606, 2008     

Novel network morphology of poly(p‐oxybenzoyl)

Polymerization of 4‐acetoxybenzoic acid (ABA) with 3,5‐diacetoxybenzoic acid (DABA) was examined to control the morphology of poly(p‐oxybenzoyl) (POB). Polymerizations were carried out at a concentration of 1.0% in an aromatic solvent Therm S‐1000® (mixture of dibenzyltoluene) at 320 °C. Polymerization of ABA yielded the POB fibrillar crystals, but the polymerization with DABA at a concentration in the feed (χ_f) of 0.10–0.15 afforded novel network structures comprised of spheres connected by fibrillar crystals. The diameter of the spheres prepared at χ_f of 0.15, which were 0.7 and 5.0 μm, showed bimodality. The network distance, fibril length, and fibril width were 6.1, 2.6, and 0.1 μm, respectively. They possessed high crystallinity. The network structure was formed as follows. Co‐oligomers were first precipitated in the beginning of the polymerization by liquid–liquid phase separation to form the microdroplets. The fibrillar crystals were formed in the coalesced spheres by the crystallization of oligomers induced by the increase of molecular weight. The fibrillar crystals connecting the spheres gradually appeared owing to the shrinkage of the spheres. The fibrillar crystals grew from the surface of the spheres with the crystallization of homo‐oligomers of 4‐oxybenzoyl units, and finally the network structure was completed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1624–1634, 2005     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Morphology of poly(p‐oxybenzoyl) prepared in perfluoropolyether

Solvent effect on the morphology of poly(p‐oxybenzoyl) (POB) prepared by the reaction‐induced phase separation of oligomers was examined by the polymerization of p‐acetoxybenzoic acid in perfluoropolyether Aflunox^TM (AFL2507 and AFL606). Polymerization was carried out at 320°C for 6 hr. POB microspheres were formed in AFL2507 by the liquid–liquid phase separation of oligomers due to the low miscibility of oligomers in AFL2507. The molecular weight of the solvent influenced the morphology, and the polymerization in AFL606 of which the molecular weight was lower than AFL2507 yielded whiskers formed by crystallization of oligomers induced by the increase in miscibility compared with that in AFL2507. The solvent structure and its molecular weight influenced the miscibility of oligomers and ultimately controlled the morphology from whisker to microsphere. Copyright © 2004 John Wiley & Sons, Ltd.     

Heterogeneous polycondensation for composition control of poly(p‐mercaptobenzoyl‐co‐p‐benzamide) by shearing

Composition control of aromatic poly(thioester‐amide) was examined by the reaction‐induced phase separation during polymerization of S‐acetyl‐4‐mercaptobenzoic acid (AMBA) and p‐acetylaminobenzoic acid (AABA) in aromatic solvent. The poly(thioester‐amide)s were obtained as precipitates and their yields became lower at the middle range of the content of AMBA in feed (χ_f). The contents of p‐mercaptobenzoyl (MB) moiety (χ_p) in the precipitates prepared without shearing were in good agreement with the χ_f values. In contrast to this, the χ_p values of the precipitates prepared at χ_f of 50–70 mol % under shearing were much lower than the χ_f values. The reaction rate of AMBA increased with shearing, whereas that of AABA was unchanged by shearing. This shearing effect on the reaction rates accelerated to form the homo‐oligomers. The solubility of MB oligomers enhanced by shearing, whereas that of p‐benzamide oligomers did not enhance owing to the strong interaction through hydrogen bonding. The MB oligomers were inhibited to be precipitated, resulting in the lower χ_p values than the χ_f values. The composition could be controlled by the application of the shearing to the heterogeneous polymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4301–4308     

Nonstoichiometric polycondensation of 4‐acetoxybenzoic acid in the presence of monoacetate

Nonstoichiometric polycondensation of 4‐acetoxybenzoic acid (ABA) was examined in the presence of three kinds of aromatic monoacetates: 4‐hexyloxyphenyl acetate, 4‐decyloxyphenyl acetate, and 4‐octadecyloxyphenyl acetate. Polymerizations were carried out in liquid paraffin at 320 °C under nonstoichiometric conditions, in which the acetoxy group was in large excess of the carboxyl group. Poly(4‐oxybenzoyl) (POB) was obtained as crystal at the molar ratio of monoacetates in feed (χ) of less than 80 mol %, meaning that the concentration of the acetoxy group was five times that of the carboxylic group. The obtained POB possessed much higher number average degree of polymerization (DP_n), ranging from 353 to 467, than the calculated DP_n on the basis of χ. High molecular weight polymer was synthesized even under nonstoichiometric conditions via crystallization of oligomers and the following solid‐state polymerization in the crystals. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1757–1766, 2005     

X‐Ray and Electron Diffraction Study of Poly(p‐dioxanone)

Summary: Solution‐grown lamellar crystals of poly(p‐dioxanone) (PPDX) have been crystallized isothermally from butane‐1,4‐diol at 100 °C. The crystal structure of PPDX has been determined by interpretation of X‐ray fiber diagrams of PPDX fibers and electron diffraction diagrams of lozenge‐shaped chain‐folder lamellar crystals. The unit cell of PPDX is orthorhombic with space group P2₁2₁2₁ and parameters: a = 0.970 nm, b = 0.742 nm, and c (chain axis) = 0.682 nm. There are two chains per unit cell, which exist in an antiparallel arrangement.

Transmission electron micrograph of PPDX chain‐folded lamellar crystals obtained by isothermal crystallization and its electron diffraction diagram.     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

One‐pot preparation of aromatic poly(azomethine ester) fibrillar crystals using reaction‐Induced crystallization

Polymerizations of 4‐(4‐acetoxybenzylideneamino)benzoic acid were performed in dibenzyltoluene (DBT) and a mixture of DBT and liquid paraffin at 350 °C for 6 h. Fibrillar crystals of poly[4‐(4‐oxybenzylideneamino)benzoyl] (POAB) having the width of 50–450 nm and the length of over 15 μm were obtained by the crystallization during the polymerization. The fibrillar crystals possessed high crystallinity and the molecular chains aligned perpendicular to the long axis of the fibrillar crystals. Plate‐like crystals were initially formed by the crystallization of oligomers, and then they changed to the fibrillar crystals via the formation of bundle‐like crystals after 1 h. Molecular weight increased by the further polymerization in the crystals. Based on these results, one‐pot preparation of the fibrillar POAB crystals was examined by the polymerization of 4‐acetoxybenzaldehyde and 4‐aminobenzoic acid. The polymerization at 180 °C for 2 h and then at 350 °C for 6 h afforded the fibrillar crystals with a small amount of the ribbon‐like crystals. Although the side‐reaction to generate the p‐benzamide sequences was not completely depressed, the sequence of heating in which 180 °C for the formation of the azomethine linkage and then 350 °C for the formation of the ester linkage was preferable to prepare the fibrillar POAB crystals. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ring‐opening polymerization of 1,3‐benzoxazines by p‐toluenesulfonates as thermally latent initiators

p‐Toluenesulfonic acid (TsOH) and several alkyl p‐toluenesulfonates, that is, methyl p‐toluenesulfonate (TsOMe), cyclohexyl p‐toluenesulfonate (TsOCH), and neopentyl p‐toluenesulfonate (TsONP), were evaluated as initiators for the ring‐opening polymerization of benzoxazines. TsOH and TsOMe were highly efficient initiators that induced the polymerization at 60 and 80 °C, respectively. In contrast, TsOCH and TsONP did not initiate the polymerization below 100 °C, while they induced the polymerization at elevated temperatures, 120 and 150 °C, respectively. When TsOCH was used as an initiator, the corresponding polymerization rate was comparable to that observed for the polymerization with using TsOH as an initiator. These results suggested that neutral TsOCH and TsONP can be regarded as “thermally latent initiators,” which underwent the thermal dissociation at the elevated temperatures to generate the corresponding alkyl cations and/or TsOH as the initiators of the polymerization. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Selective synthesis of poly(p‐oxybenzoyl) by fractional polycondensation: Enhancement of selectivity by shearing

The influence of shear flow, especially the timing for the application of shearing, was examined to enhance the selectivity for the preparation of poly(p‐oxybenzoyl) (Pp‐OB) by using hydrodynamically induced phase separation during polymerization of 4‐(4‐acetoxybenzoyloxy)benzoic acid (p‐ABAD) and m‐acetoxybenzoic acid (m‐ABA). The polymers containing few m‐oxybenzoyl (m‐OB) moieties were obtained as precipitates even at high content of m‐OB moiety in feed (χ_f) under shear flow. The content of m‐OB moiety in the precipitates (χ_p) prepared under shearing throughout the polymerization at the shear rate (γ) of 489 s^?1 was 6.3 mol % even at χ_f of 60 mol %. Especially, the Pp‐OB was obtained as the precipitates at χ_f of less than 50 mol %. The timing of the application of the shearing influenced the selectivity significantly, and the shearing just after the precipitation of the oligomers started was quite efficient to enhance the selectivity more. The χ_p of the precipitates prepared with shearing at γ of 489 s^?1 just after the precipitation was only 3.9 mol % even at χ_f of 60 mol %. The shear flow reduced the difference in the reactivity between p‐ABAD and m‐ABA, resulting in the decrease in the selectivity with regard to the formation of p‐oxybenzoyl homo‐oligomer. However, the shear flow enhanced the difference in the miscibility between homo‐oligomers and co‐oligomers. This change in the miscibility by shear flow brought about the more rapid precipitation of homo‐oligomers, leading to the enhancement of the selectivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reverse atom transfer radical polymerization of methyl methacrylate initiated by p‐chlorobenzenediazonium tetrafluoroborate

The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003     

Dual Self‐Assembling Polycondensation of p‐Acetoxybenzoic Acid and p‐Acetamidobenzoic Acid

The dual self‐assembling polycondensation of p‐acetoxybenzoic acid (ABA) and p‐acetamidobenzoic acid in Therm S 800 was examined at 300 °C. Needle‐like crystals and lath‐like crystals were formed simultaneously through reaction‐induced crystallization of oligomers at a molar ratio of 30–50 mol‐% ABA in the feed. The needle‐like crystals comprised more p‐oxybenzoyl units, whereas the lath‐like ones contained higher amounts of p‐benzamide moieties.

     

Synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with Ziegler–Natta,rhodium, and palladium complexes

The synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene was carried out with a homogeneous vanadium acetylacetonate/aluminum triethyl catalyst system, a bis(rhodium chloride cycloocta‐1,5‐diene) complex, and a palladium/trimethylsilyl complex. In all cases, the main fraction was a polymer with a stereoregular structure. The polymerization with the vanadium catalyst gave a polymer fraction in a low yield. The polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with the soluble rhodium complex gave a polymer in a high yield. The soluble palladium/chlorotrimethylsilane complex gave a polymer in a good yield. On the basis of the spectroscopic data, the poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} obtained, in all cases, showed a cis–transoidal stereoregular structure. The molecular mass of poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} was determined by the matrix‐assisted laser desorption/ionization time‐of‐flight technique. The kinetics of the reaction were analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6438–6444, 2005     

Grafting of poly(styrene‐co‐p‐chloromethyl styrene) with ethyl methacrylate via atom transfer radical polymerization catalyzed by CuCl/1,2‐dipiperidinoethane

Poly(styrene‐graft‐ethyl methacrylate) graft copolymer was prepared by atom transfer radical polymerization (ATRP) with poly(styrene‐co‐p‐chloromethyl styrene)s in various compositions as macroinitiator in the presence of CuCl/1,2‐dipiperidinoethane at 130 °C in N,N‐dimethylformamide. Both macroinitiators and graft copolymers were characterized by elemental analysis, IR, ¹H and ¹³C NMR, and differential scanning calorimetry. 1,2‐Dipiperidinoethane was an effective ligand of CuCl for ATRP in the graft copolymerization. The controlled growth of the side chain provided the graft copolymers with polydispersities of 1.60–2.05 in the case of poly(styrene‐co‐p‐chloromethyl styrene) (62:38) macroinitiator. Thermal stabilities of poly(styrene‐graft‐ethyl methacrylate) graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 668–673, 2003     

Controlled polymerizations of 2‐(dialkylamino)ethyl methacrylates and their block copolymers in protic solvents at ambient temperature via ATRP

Very well‐controlled polymerizations of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and 2‐(diethylamino)ethyl methacrylate (DEAEMA) in aqueous and methanolic solutions via atom transfer radical polymerization (ATRP) at ambient temperature were demonstrated. Poly(DMAEMA) and poly(DEAEMA) of low polydispersity index (PDI) of ～1.07 were obtained using the p‐toluenesulfonyl chloride/CuCl/1,1,4,7,10,10‐hexamethyl‐triethylenetetramine (p‐TsCl/CuCl/HMTETA) system. Excellent control of polymerization was achieved even in pure methanol. This is in contrast with the very poor control of DMAEMA ATRP in methanol reported previously using a different intiator/catalyst/ligand system. The initiator p‐TsCl underwent hydrolysis reaction in aqueous methanolic solutions with a second‐order rate constant of 6.1 × 10^?4 dm³ mol^?1 s^?1 at 25 °C. Both poly(DMAEMA) and poly(DEAEMA) retained almost full chlorine‐functionization at the chain ends. Well‐defined block copolymers of DEAEMA and DMAEMA were successfully obtained by starting with either macroinitiators of DEAEMA or DMAEMA. Other well‐defined diblock copolymers could be prepared using these macroinitiators. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5161–5169, 2004     

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles by dispersion polymerization

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles were prepared by dispersion polymerization in toluene/2‐methylpropan‐1‐ol medium using cellulose acetate butyrate and dibenzoyl peroxide (BPO) as a steric stabilizer and initiator, respectively. The particle size was reduced with decreasing solvency of the reaction medium (more nuclei were generated) because the critical chain length of the precipitated oligomers decreased with an increasing toluene content, which is a poorer solvent for the polymer than 2‐methylpropan‐1‐ol. There is an optimum initiator concentration (2 wt % BPO relative to monomers) for producing low‐polydispersity particles under given conditions. Additionally, discrete spherical particles were obtained at a low monomer concentration and/or higher polymerization temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1625–1632, 2002     

Poly(p‐phenylene methylene)‐based block copolymers by mechanistic transformation

The synthesis of poly(p‐phenylene methylene) (PPM)‐based block copolymers such as poly(p‐phenylene methylene)‐b‐poly(ε‐caprolactone) and poly(p‐phenylene methylene)‐b‐polytetrahydrofuran by mechanistic transformation was described. First, precursor PPM was synthesized by acid‐catalyzed polymerization of tribenzylborate at 16 °C. Then, this polymer was used as macroinitiators in either ring‐opening polymerization of ε‐caprolactone or cationic ring‐opening polymerization of tetrahydrofuran to yield respective block copolymers. The structures of the prepolymer and block copolymers were characterized by GPC and ¹H NMR investigations. The composition of block copolymers as determined by ¹H NMR and TGA analysis was found to be in very good agreement. The thermal behavior and surface morphology of the copolymers were also investigated, respectively, by differential scanning calorimetry and atomic force microscopy measurements, and the contribution of the major soft segment has been observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011