High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Studies on the modification of poly(ω‐bromoalkyl‐1‐glycidylether)s with 4′‐methoxybiphenyl‐4‐oxy mesogenic groups

A series of poly[ω‐(4′‐methoxy‐biphenyl‐4‐oxy)alkyl‐1‐glycidylether]s were synthesized by chemically modifying the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐hydroxy‐4′‐methoxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yields and almost quantitative degrees of modification. They were all insoluble in THF and other common solvents. Characterization by ¹³C NMR confirmed that all the polymers had the expected structure. The liquid crystalline behavior of the polymers was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction studies. Polymers that had alkyl spacers with n = 2 and 4 were smectic C, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C again. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5998–6006, 2005     

Living free‐radical polymerization (reversible addition–fragmentation chain transfer) of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate: A route to architectural control of side‐chain liquid‐crystalline polymers

Side‐chain liquid‐crystalline polymers of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate with controlled molecular weights and narrow polydispersities were prepared via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐(2‐cyanopropyl) dithiobenzoate as the RAFT agent. Differential scanning calorimetry studies showed that the polymers produced via the RAFT process had a narrower thermal stability range of the liquid‐crystalline mesophase than the polymers formed via conventional free‐radical polymerization. In addition, a chain length dependence of this stability range was found. The generated RAFT polymers displayed optical textures similar to those of polymers produced via conventional free‐radical polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2949–2963, 2003     

Synthesis and crosslinking of biphenyl and naphthalene liquid‐crystalline polyethers with pendant full‐saturated and vinyl‐terminated aliphatic chains

Two series of vinyl‐terminated, side‐chain liquid‐crystalline polyethers containing 4,4′‐biphenyl and 2,6‐naphthalene moieties as mesogenic cores with several contents of vinyl crosslinkable groups were synthesized by chemically modifying poly(epichlorohydrin) with mixtures of saturated and vinyl‐terminated mesogenic acids. In most cases the degree of modification was over 90%. The polymers were characterized by chlorine analysis, IR and ¹H and ¹³C NMR spectroscopies, viscometry, size exclusion chromatography/multi‐angle laser light scattering, and thermogravimetric analysis. The liquid‐crystal behavior of all the synthesized polymers was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators, which generally led to liquid‐crystal elastomers. The mesophase organization was maintained on the crosslinked materials, as confirmed by POM and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3384–3399, 2003     

Synthesis and properties of azobenzene‐containing poly(1‐alkyne)s with different functional pendant groups

1‐Alkynes containing azobenzene mesogenic moieties [HC?C(CH₂)₉? O? ph? N?N? ph? O? R; R = ethyl ( 1 ), octyl ( 2 ), decyl ( 3 ), (S)‐2‐methylbutyl ( 4 ), or (S)‐1‐ethoxy‐1‐oxopropan‐2‐yl ( 5 ); ph = 1,4‐phenyl] were synthesized and polymerized in the presence of a Rh catalyst {(nbd)Rh⁺[B(C₆H5)₄]^?; nbd = 2,5‐norbornadiene} to yield a series of liquid‐crystalline polymers in high yields (e.g., >75%). These polymers had moderate molecular weights (number‐average molecular weight ≥ 12,000), high cis contents in the main chain (up to 83%), good thermal stability, and good solubility in common organic solvents, such as tetrahydrofuran, chloroform, and dichloromethane. These polymers were thoroughly characterized by a combination of infrared, nuclear magnetic resonance, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy, and two‐dimensional wide‐angle X‐ray diffraction techniques. The liquid‐crystalline behavior of these polymers was dependent on the tail group attached to the azobenzene structure. Poly‐ 1 , which had the shortest tail group, that is, an ethyl group, showed a smectic A mesophase, whereas poly‐ 2 , poly‐ 3 , and poly‐ 5 , which had longer or chiral tail groups, formed smectic C mesophases, and poly‐ 4 , which had another chiral group attached to the azobenzene structure, showed a chiral smectic C mesophase in both the heating and cooling processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4532–4545, 2006     

Ferrocene‐based organophosphorus liquid–crystalline polymers: Synthesis and characterization

Ferrocene‐containing polyphosphate and phosphonate esters were synthesized by the solution polycondensation method. The structure of the polymers was confirmed using various spectroscopic techniques. The formation of two types of chain blocks was confirmed by ³¹P NMR spectroscopy. Hot stage optical polarized microscope (HOPM) analysis revealed that all the polymers have a liquid–crystalline property. The char yields of the synthesized similar polymers were much higher than those of nonphosphorus polymers already reported in the literature. DSC analysis confirmed our predictions over the liquid–crystalline property, glass‐transition temperature, isotropization temperature, and thermal stability of the polymers. The effects of substitution on the side chain, structure of the liquid‐–crystalline phase, and thermal stability of the polymers have also been discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2396–2403, 2001     

Main chain thermotropic liquid crystalline polyurethanes containing biphenyl mesogens based on novel AB‐type self‐polycondensation route: FT‐IR and XRD studies

The detailed mesophasic characterization of main chain liquid crystalline polyurethanes containing biphenyl mesogen, which were synthesized by the novel AB‐type self‐polycondensation approach, was carried out by using Differential Scanning Calorimetry (DSC), Polarized Optical Microscopy (POM), variable temperature X‐ray Diffraction (XRD), and Fourier Transform Infrared (FT‐IR) spectroscopic studies. The type of mesophase present in these polymers was identified to be the smectic A phase by POM and XRD studies. The smectic layer thickness was found to increase as the length of the spacer increased. The effect of temperature on the hydrogen bonding was analyzed by FT‐IR studies. The curve‐fitting analysis of the NH stretching and C?O stretching modes of vibrations indicated a gradual decrease in hydrogen bonding during the transition from the crystalline state to the mesophase. The mesophase to isotropic liquid transition was then accompanied by the complete disappearance of the hydrogen bonding. The biphenyl bands also showed changes during phase transitions due to the coupling of biphenyl vibration modes with the urethane linkage attached to it. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1903–1912, 2005     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Thermotropic liquid‐crystalline polymers containing five‐membered heterocyclic groups. X. Relationships between structures of semirigid polyesters based on three disubstituted 2,5‐diphenyl‐1,3,4‐thiadiazoles and thermotropic liquid‐crystalline and optical properties

Thermotropic liquid‐crystalline (LC) semirigid polyesters based on three terphenyl analogues of 1,3,4‐thiadiazole (2,5‐diphenyl‐1,3,4‐thiadiazole)s (DPTD) linking undecamethyleneoxy chain at different substituted positions were synthesized from three disubstituted (4,4′‐, 3,4′‐, and 3,3′‐) dioxydiundecanols of DPTD and four diesters, and the relationships between polymer structures and LC and optical properties were investigated. DSC measurements, texture observations, and wide‐angle X‐ray analyses revealed that the polymers composed of DPTD moiety having a more linear molecular structure and 1,4‐phenylene unit or short aliphatic chain tend to exhibit LC smectic C and/or A phases. The following observations were made: (1) the emergence of smectic C and/or A phases in all the polymers on the basis of 4,4′‐disubstituted DPTD, (2) formation of enantiotropic smectic C and/or A phases in the polymers containing a 1,4‐phenylene unit in the main chain, (3) formation of a more stable smectic C phase in the polymers having a short aliphatic [(CH₂)₄] chain, and (4) a decrease of the mesomorphic property of the polyesters in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD. Solution and solid‐state ultraviolet–visible and photoluminescent spectra indicated that all the polyesters display maximum absorbances and blue emissions arising from the DPTD moiety, whose peak maxima were shifted to lower wavelengths in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD as well as the aforementioned LC property. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2676–2687, 2003     

Photo and electrically switchable behavior of azobenzene containing pendant bent‐core liquid crystalline polymers

New class of photo and electrically switchable azobenzene containing pendant bent‐core liquid crystalline monomers ( AZBM 1, 2 , and 3 ) and their polymers ( AZBP 1, 2 , and 3 ) are reported. The synthesized precursors, monomers, and polymers were characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopy. Thermal stability of polymers was examined by thermogravimetric analysis and revealed stable up to 260 °C. The mesophase transition of monomers and polymers are observed through polarized optical microscopy (POM) and further confirmed by differential scanning calorimetry (DSC). The electrically switching property of monomers and their polymers were studied by electro‐optical method. Among the three monomers AZBM 1, 2 , and 3 , AZBM 1 and 2 exhibit antiferroelectric (AF) switching and AZBM 3 exhibits ferroelectric (F) switching behavior. On the other hand, low molecular weight polymers ( AZMP 1, 2 , and 3 ) show weak AF and F switching behavior. The photo‐switching properties of bent‐core azo polymers are investigated using UV‐vis spectroscopy, trans to cis isomerization occurs around 25 s for AZBP‐1 and 30 s for AZBP‐2 and 3 in chloroform, whereas reverse processes take place around 80 and 90 s. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Liquid‐crystalline azobenzene‐containing ferrocene‐based polymers: study on synthesis and properties of main‐chain ferrocene‐based polyesters with azobenzene in the side chain

Ferrocene‐based polymers are characterized by their electrochemical activity, good redox properties, thermal, photochemical stability, and liquid crystallinity, and thus they have various applications in different fields. A comprehensive investigation on the synthesis and properties of three novel main‐chain ferrocene‐based polyesters with azobenzene in the side chain (MFPAS) was carried out. The main‐chain ferrocene‐based polyester, poly(N‐phenyldiethanolamine 1,1′‐ferrocene dicarboxylate (PPFD), was synthesized via the solution polycondensation reaction of 1,1′‐ferrocenedicarbonyl chloride with phenyldiethanolamine (PDE). The novel MFPAS were synthesized via the post‐polymerization azo‐coupling reaction of PPFD with three different 4‐substituted anilines including 4‐nitroaniline, 4‐aminobenzoic acid, and 4‐aminobenzonitrile to produce 4‐nitrophenylazo‐functionalized‐PPFD (PPFD‐NT), 4‐carboxyphenylazo‐functionalized‐PPFD (PPFD‐CA), and 4‐cyanophenylazo‐functionalized‐PPFD (PPFD‐CN), respectively. All the synthesized polymers were characterized by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, and UV–visible spectroscopy. In addition, powder X‐ray diffraction patterns were measured for the synthesized polymers. The photoisomerization of the MFPAS was studied. The thermal properties of the MFPAS were studied using thermogravimetric analysis and differential scanning calorimetry. PPFD‐CA and PPFD‐CN were found to be more thermally stable than PPFD‐NT. Finally, the liquid‐crystalline properties of PPFD and the MFPAS were examined using polarized optical microscope. It was found that all the polymers possessed nematic phases and exhibited textures with schlieren disclinations. Copyright © 2012 John Wiley & Sons, Ltd.     

Investigation on dual properties of photosensitive thermotropic liquid‐crystalline poly(benzylidene‐ether)s containing alkanones and methylene spacers in the main chain

Thermotropic main chain liquid‐crystalline poly (benzylidene‐ether)s were synthesized by Claisen‐Schmidt polycondensation reaction of 4,4′‐diformyl‐2,2′‐dimethoxy‐α,ω‐diphenoxyalkanes with acetone, cyclopentanone, and cyclohexanone. The diformyl precursors were synthesized from 4‐hydroxy‐3‐methoxybenzaldehyde with dibromoalkanes of varying spacer lengths. The structure of monomers and polymers was confirmed by elemental analyses, Fourier‐transform infrared, ¹H NMR, and ¹³C NMR spectral analyses. The thermal properties were studied by thermogravimetric analysis and differential scanning calorimetry. Thermogravimetric analysis (TGA) data revealed that the polymers were stable up to 285 °C and start degrading thereafter. Cyclopentanone‐containing polymers are more stable than cyclohexanone‐ and acetone‐containing polymers. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index values using Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using differential scanning calorimetry (DSC), and it was proved that the isotropic temperature decreases with an increase in the length of the spacer. Polarized optical microscopic study showed that cyclohexanone‐containing polymers exhibit nematic threadlike and nematic droplet texture. The photolysis of liquid‐crystal poly(benzylidene‐ether)s revealed that the Entgegen, Zusammen (EZ) photoisomerization proceeds in the system. The band gap energy was calculated from absorption spectra and is in the range of 3.05–3.37 eV and proved that the length of spacers has a significant influence on their absorption and emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

Preparation of Ag nanoparticles termini‐protected side‐chain liquid crystalline azobenzene polymers by RAFT polymerization

A new synthetic approach to prepare Ag nanoparticles protected side‐chain liquid crystalline (LC) azobenzene polymers was reported. It is based on the reduction of silver ions in presence of a LC polymer polymerized by RAFT. The formation of Ag colloidal nanoparticles was confirmed by TEM and UV analysis. At the same time, according to the results of DSC, XPS, and FTIR spectra, Ag nanoparticles were protected by the side‐chain LC azobenzene polymers through surface attachment interactions between thiol groups and Ag. The out‐plane orientation of side‐chain LC is confirmed by surface‐enhanced Raman spectra analysis and scanning near‐field optical microscope, resulting from the large electromagnetic field arising from the excitation of surface plasmon polariton of Ag nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5380–5386, 2007     

Novel side‐chain liquid‐crystalline polyimide for film materials

A novel side‐chain liquid‐crystalline polyimide (SLCPI) was prepared via copolycondensation from 3,5‐diamino‐benzonic‐4′‐biphenyl ester, 4,4′‐diamino‐ biphenyl ether, and 3,3′,4,4′‐oxydiphthalic dianhydride. The energy‐minimized structure and liquid crystallinity of SLCPI were investigated by molecular modeling, differential scanning calorimetry (DSC), wide‐angle X‐ray scattering, and polarized optical microscopy, respectively. The results indicated that this polyimide (PI) with side‐chain mesogenic units exhibited a nematic NI phase. Because of the in situ self‐reinforcement of side‐chain mesogenic units, the improved tensile strength and modulus of PI films reached 270% and 300%, respectively. The coefficient of thermal expansion of films decreased by 40%. DSC and thermogravimetric analyses indicated that the phase‐transition temperature of SLCPI was above 240 °C, and the 5% weight‐loss temperature was above 520 °C. Moreover, copolycondensation of two diamines with dianhydride and incorporation of pendent mesogenic units diminished the regularity and symmetry of main chains; as a result, SLCPI exhibits good film processability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 554–559, 2003     

A novel generation of photoactive comb‐shaped polyamides for the photoalignment of liquid crystals

A new approach to the synthesis of photoactive comb‐shaped homo‐ and copolyamides containing azobenzene, cinnamate, and coumarin side groups for photoalignment of liquid crystals was elaborated. Photooptical properties and photoorientational ability of these polymers with respect to liquid crystals were studied. It was shown that polarized UV irradiation of all spin‐coated polyamides leads to orientation of liquid crystalline molecules deposited on the polyamide thin films. The synthesized polymers containing cinnamate and coumarin side groups as well as azobenzene‐containing cyano‐ and nitro‐substituted polymers demonstrated good orientation ability in relation to liquid crystals displaying photoinduced planar orientation with high dichroism values within the range of 0.68–0.72. Contrary to the above‐mentioned polyamides, azobenzene‐containing fluorosubstituted polymers induced a homeotropic orientation of liquid crystals. It was shown that the synthesized photoactive polyamides can be considered as promising photoalignment materials for application in display technology, photonics, and other “smart” optical devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4031–4041     

Synthesis and crosslinking of vinyl‐terminated biphenyl and naphthalene liquid‐crystalline poly(epichlorohydrin) derivatives: Effect of nonmesogenic nonvinylic units on the mesogenic properties

Two series of vinyl‐terminated side‐chain liquid‐crystalline polyethers containing ethylene oxide or glycidyl aromatic carboxylates as spacers were synthesized. The mesogenic cores were 4,4′‐biphenyl or 2,6‐naphthalene moieties. The polymers were synthesized by chemically modifying poly(epichlorohydrin) or poly(epichlorohydrin)‐poly(ethylene oxide) with the corresponding mesogenic carboxylic acids or with mixtures of these acids and the nonmesogenic non‐crosslinkable analogous 4‐biphenyl‐ and 2‐naphthalenecarboxylic acids. In most cases the degree of modification achieved was higher than 90%. The polymers were characterized by chlorine analysis, IR, and ¹H and ¹³C NMR spectroscopies; viscosimetry; size exclusion chromatography; multi‐angle laser light scattering; and thermogravimetric analysis. The liquid‐crystal behavior, shown by most polymers, was examined by differential scanning calorimetry, polarized optical microscopy (POM), and X‐ray diffraction on mechanically oriented samples. The crosslinking of most polymers was done by peroxide‐type initiators that led to liquid‐crystal thermosets or elastomers. The freezing of the mesophase organization on the crosslinked materials was confirmed by POM and X‐ray diffraction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3893–3908, 2002     

Design,synthesis, and characterization of a combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymer via atom transfer radical polymerization

A novel combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymers (MJLCPs) containing two biphenyls per mesogenic core of MJLCPs main chain, poly(2,5‐bis{[6‐(4‐butoxy‐4′‐oxy‐biphenyl)hexyl]oxycarbonyl}styrene) (P1–P8) was successfully synthesized via atom transfer radical polymerization (ATRP). The chemical structure of the monomer was confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymer with different molecular weights (P1–P8) were performed with ¹H NMR, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). Their phase transitions and liquid‐crystalline behaviors of the polymers were investigated by differential scanning calorimetry (DSC) and polarized optical microscope (POM). We found that the polymers P1–P8 exhibited similar behavior with three different liquid crystalline phases upon heating to or cooling in addition to isotropic state, which should be related to the complex liquid crystal property of the side‐chain and the main‐chain. Moreover, the transition temperatures of liquid crystalline phases of P1–P8 are found to be dependent on the molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7310–7320, 2008