Four-wave mixing in dual wavelength fiber laser utilizing SOA for wavelength conversion

In this paper, a novel configuration of a wavelength converter is set forth by utilizing a semiconductor optical amplifier (SOA) as a nonlinear gain medium to generate a four-wave mixing (FWM) effect by using a dual wavelength bi-erbium-doped fiber laser that uses an Arrayed Waveguide Grating (AWG) together with two optical channel selector (OSC) as selective elements to function as a dual wavelength switchable pump power. The four-wave mixing (FWM) is produced with a wavelength detuning of 7 nm from the pump and signal which used is as the converted signal at wavelength 1532.8 nm or 1534.5 nm for transferring data from the input signal at wavelength 1547.0 nm. Thus, even though the conversion efficiency is as low as −43 dB, it is still possible for applications as a wavelength converter.     

Erbium doped fiber ring laser for optical wavelength conversion

We experimentally investigate the gain saturation effect of a piece of 8 m long Erbium doped fiber (EDF), we introduce a theoretical model for the EDF ring loop, and our simulation results show very good cross-gain modulation (XGM) and wavelength conversion. We also experimentally investigate the XGM in an EDF ring loop system. Based on the study of the XGM in the EDF ring loop system, a wavelength conversion is designed with the EDF ring loop system. The EDF ring loop systems as a wavelength conversion is experimentally demonstrated by converting a sinusoidal modulated optical signal at wavelength of 1551 nm to an optical signal at wavelength of 1553.3 nm.     

Supercontinuum generation by combining clad-pumped Er/Yb co-doped fiber amplifier and highly nonlinear photonic crystal fiber

We present an experimental study on supercontinuum generation by combining a clad-pumped Er/Yb co-doped fiber amplifier (EYDFA) and a highly nonlinear photonic crystal fiber (HNL-PCF). By using the nonlinear polarization rotation technique, a stable femtosecond optical pulse seed signal with a central wavelength of 1556.36 nm and a spectral line width of ∼5.6 nm has been obtained. Then, this pulsed seed signal is amplified by the EYDFA, the amplified pulse, which, with the broaden spectrum, propagates in the HNL-PCF. The 20 dB bandwidth of ∼520 nm from 1230 to 1750 nm is obtained.     

Simultaneous wavelength conversion and pulse compression exploiting cascaded second-order nonlinear processes in LiNbO3 waveguides

Simultaneous wavelength conversion and pulse compression are proposed and demonstrated exploiting cascaded second-order nonlinear processes in periodically domain-inverted LiNbO₃ waveguides. The influences of initial pulse widths and waveguide length on the conversion efficiency and converted pulse compression are theoretically analyzed. Tunable wavelength conversion is performed for the signal pulse with the temporal width of 7.5 ps and repetition rate of 40 GHz. Conversion efficiency of more than −24 dB is obtained for 35-nm conversion span under average signal power of 10 dBm when a CW control wave is adopted.     

Numerical design of high nonlinear coefficient of microstructure optical fibers

This paper presents a theoretical design of highly nonlinear microstructure optical fiber with dispersion-flat characteristics. The APSS™ 2.3 software based on the finite difference method with perfectly matched boundary conditions is used to simulate the properties of the proposed microstructure optical fiber. According to simulation, the proposed fiber warrants a high nonlinear coefficient of the order 41 W⁻¹ km⁻¹ and a low dispersion of 0.25 ps/nm/km at 1550 nm wavelength. It assumes a dispersion-flat characteristic of 0 ± 0.50 ps/nm/km in a 1450-1620 nm wavelength range centering 1550 nm wavelength with a modest number of design parameters.     

High-power 1.5 and 3.4 μm intracavity KTA OPO driven by a diode-pumped Q-switched Nd:YAG laser

With a non-critically phase-matched KTA crystal, a high-power intracavity optical parametric oscillator (IOPO) driven by a diode-side-pumped acousto-optically Q-switched Nd:YAG laser has been realized. The maximum average output power of 13.6 W at the signal wavelength of 1534 nm and 3 W at the idler wavelength of 3472.7 nm were obtained with the repetition rate of 18 kHz, giving the optical-optical conversion efficiency of about 5.7% from diode-power at 808 nm to OPO signal output, which was the highest conversion efficiency for intracavity KTA OPO with diode-side-pumping configurations to our best knowledge. At the highest output power of 13.6 W, the signal pulse duration of 5.46 ns was obtained, corresponding to the single pulse energy of 756 μJ and peak power of 138 kW, respectively.     

Polarization maintaining large nonlinear coefficient photonic crystal fibers using rotational hybrid cladding

In this paper, we present and explore a new hybrid cladding design for improved birefringence and highly nonlinear photonic crystal fibers (PCFs) in a broad range of wavelength bands. The birefringence of the fundamental mode in such a PCF is numerically analyzed using the finite element method (FEM). It is demonstrated that it is possible to design a simple highly nonlinear hybrid PCF (HyPCF) with a nonlinear coefficient of the about 46 W⁻¹ km⁻¹ at a 1.55 μm wavelength. According to simulation, the highest modal birefringence and lowest confinement loss of our proposed structure at the excitation wavelength of λ = 1.55 μm can be achieved at a magnitude of 1.77 × 10⁻² and of the order less than 10² dB/km with only five rings of air-holes in the fiber cladding.     

Experimental study of SOA-based NRZ-to-PRZ conversion and distortion elimination of amplified NRZ signal using spectral filtering

We experimentally study both reshaping of nonreturn-to-zero (NRZ) signal and NRZ to pseudoreturn-to-zero (PRZ) format conversion based on self-phase modulation of a semiconductor optical amplifier (SOA) and detuning an optical bandpass filter (OBF). When an OBF with 1 nm bandwidth is blue shifted by 0.8 nm, the distortion of the amplified NRZ signal at 10 Gbit/s is shown to be eliminated completely. When an OBF with 0.32 nm bandwidth is red shifted by 0.42 nm from the carrier frequency, NRZ-to-PRZ conversion at 10 Gbit/s is obtained. A holding beam is used to suppress the SOA noise and improve the output extinction ratio (ER). The output ER of both the reshaped NRZ and the converted PRZ is larger than 10 dB when the signal wavelength is longer than 1540 nm, and an input power dynamic range from −7 dBm to 2 dBm is obtained at a signal wavelength of 1563.6 nm. The average power of the reshaped NRZ signal is about 3 dBm at an input power dynamic range of 13 dB. The amplitude fluctuation of the converted PRZ signal is around 1.6 dB.     

Tunable wavelength conversion of picosecond pulses based on cascaded sum- and difference-frequency generation in quasi-phase-matched LiNbO3 waveguides

Tunable wavelength conversion for picosecond pulses is proposed and demonstrated exploiting cascaded sum- and difference-frequency generation in quasi-phase-matched LiNbO₃ waveguides. The influences of initial pulse widths and injected pulse powers on the conversion efficiency and converted pulse width are theoretically analyzed. Arbitrarily tunable wavelength conversion is performed for the signal pulse with the temporal width of 1.57 ps and repetition rate of 40 GHz. Approximately −18.9 dB conversion efficiency and 25 nm variable region of the input signal are achieved under the lower launched signal power. The results imply that simultaneous wavelength conversion and pulse compression can be potentially obtained by using the pulsed control wave or designing longer waveguides.     

Tunable all-fiber intracavity wavelength converter without external pumps

A new architecture for tunable broadband wavelength conversion in a dispersion-shifted fiber is presented. Conversion is achieved by using four-wave-mixing in a dispersion-shifted fiber in a single fiber-ring cavity. Wide tunability is achieved by the self-generation of two tunable orthogonal pumps in the cavity. This effect is due to the introduction of two tunable fiber Bragg gratings written in high birefringence fibers which act as selective polarization and wavelength filters. The results show conversion efficiencies up to −2 dB with the signal-to-noise ratio of the converted signal up to 26 dB.     

Thermally tunable microfiber knot resonator based erbium-doped fiber laser

A compact and tunable erbium-doped fiber laser is demonstrated using a highly doped fiber and a microfiber knot resonator (MKR) structure which is laid on the surface of a small peltier. The MKR functions as both a reflector and a tunable filter where tunability is achieved by varying the temperature of the resonator by heating the peltier. A stable laser output is achieved at the 1533 nm region with an optical signal to noise ratio (OSNR) of 27 dB using a 65 mW of 980 nm pump power. The operating wavelength of the laser can be tuned from 1532.60 nm to 1533.49 nm as the temperature is increased from the room temperature of 24 to 90 °C. It is observed that the operating wavelength shifts to a longer wavelength as the temperature increases with an efficiency of 12.4 pm/°C. This is due to the thermally induced optical phase shift attributable to the changes in effective refractive index and optical path length of the MKR loop.     

Wavelength conversion in a Ti:PPSMgLN channel waveguide

A periodically poled titanium (Ti)-diffusion waveguide in near-stoichiometric MgO:LiNbO₃ (SMgLN) was fabricated that exhibits a second harmonic generation (SHG) efficiency of 63%. The device shows very high resistance to photorefractive damage at room temperature. All optical wavelength conversion by difference frequency generation (DFG) has been demonstrated in a periodically poled SMgLN (PPSMgLN) with Ti-diffusion channel waveguides. The wavelength conversion efficiency was measured to be −7.3 dB with the pump power of 150 mW and the signal power of 50 mW at room temperature.     

Design of single polarization single mode dispersion compensating photonic crystal fiber

In this paper, we present a photonic crystal fiber based on hexagonal structure for improved negative dispersion as well as high birefringence in the telecom wavelength bands. It is demonstrated that it is possible to obtain negative dispersion coefficient of −712 ps/(nm km) and relative dispersion slope (RDS) perfectly match to that of single mode fiber (SMF) of about 0.0036 nm⁻¹ at the operating wavelength 1550 nm. The proposed fiber exhibits high birefringence of the order 2.11 × 10⁻² with nonlinear coefficient about 57.57 W⁻¹ km⁻¹ at 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest.     

Optimisation of 40 Gb/s wavelength converters based on four-wave mixing in a semiconductor optical amplifier

The optimum operating powers and wavelengths for a 40 Gb/s wavelength converter based on four-wave mixing in a semiconductor optical amplifier are inferred from experimental results. From these measurements, some general rules of thumb are derived for this kind of devices. Generally, the optimum signal power should be 10 dB lower than the pump power (−16 dB conversion efficiency) whereas the wavelength separation between the signal and the pump carrier should not be lower than about four times the signal bitrate (1.3 nm for 40 Gb/s RZ signals).     

Medium power single-mode single-wavelength fiber laser

Medium-power, single-mode, single-wavelength fiber laser working at room temperature using a polarization-maintaining erbium-ytterbium co-doped fiber as the gain medium, and an un-pumped elliptical core erbium-doped fiber as a saturable absorber to reduce linewidth and mode hopping of the lasing wavelength is reported. The effects of length, erbium ion concentration, and polarization-maintaining property of the saturable absorber were explored. The output power of the laser was more than 100 mW and the lasing line was stable for more than 3 h with an intensity fluctuation of less than 0.2 dB. The laser linewidth (FWHM = Full width at half maximum) was 7.5 MHz and the signal to noise ratio was more than 50 dB. The output of the laser was measured using an optical spectrum analyzer (OSA) of resolution 1.25 GHz and a scanning Fabry-Perot spectrum analyzer (SFPSA) of resolution 6.7 MHz.     

A novel approach to all-optical wavelength conversion by utilizing a reflective semiconductor optical amplifier in a co-propagation scheme

Nonlinear optical gain modulation in an InGaAsP/InP bulk reflective semiconductor optical amplifier (RSOA) is studied. The differences of the optical properties between RSOAs and conventional SOAs are initially investigated. All-optical wavelength conversion based on nonlinear gain modulation in RSOAs is demonstrated at a bit rate of 2.488 Gbit/s. It is shown that a bit-error-rate of <10⁻⁹ can be achieved and an extinction ratio of >9 dB can be obtained at a bit rate of 2.488 Gbit/s with a 2³¹-1 non-return-to-zero (NRZ) pseudorandom bit sequence (PRBS). In comparison with conventional SOAs, wavelength conversion by RSOAs shows much improved performances in high-speed all-optical wavelength conversions.     

Supercontinuum generation in chloroform-filled photonic crystal fibers

We propose a novel method to achieve highly nonlinear photonic crystal fiber (PCF) by filling highly nonlinear liquid chloroform in the core of hollow-core PCF (HCPCF). The dispersion properties and electric field distribution of the fundamental mode are calculated by using the full-vector finite element method (FVFEM). Simulation results indicate that the zero-dispersion wavelength (ZDWL) of the chloroform-filled PCF is adjustable around 800 nm. Hence the femtosecond laser pulses with central wavelength at 800 nm can propagate in anomalous dispersion regime of the PCF, inducing the spectra broadening.     

All-optical continuously tunable delay with a high linear-chirp-rate fiber Bragg grating based on four-wave mixing in a highly-nonlinear photonic crystal fiber

A scheme for hi-fi all-optical continuously tunable delay is proposed. The signal wavelength is converted to a desired idler wavelength and converted back after being delayed by a high linear-chirp-rate (HLCR) fiber Bragg grating (FBG) based on four-wave mixing (FWM) in a highly-nonlinear photonic crystal fiber (HN-PCF). In our experiment, 400 ps (more than 8 full width of half maximum, FWHM) tunable delay is achieved for a 10 GHz clock pulse with relative pulse width broaden ratio (RPWBR) of 2.08%. The power penalty is only 0.3 dB at 10⁻⁹ BER for a 10 Gb/s 2³¹−1 pseudo random bit sequence (PRBS) data.     

All-optical wavelength converter based on fiber cross-phase modulation and fiber Bragg grating

I present new method of phase modulation to amplitude modulation conversion (PM/AM conversion) that utilizes integrating capabilities of fiber Bragg grating (FBG). I found that the wavelength converter based on fiber cross-phase modulation (XPM) and new method of PM/AM conversion have an order of magnitude higher conversion efficiency then the wavelength converter based on sideband filtration method and up to 6 dB higher conversion efficiency then the converter based on the nonlinear optical loop mirror. Numerical analysis and experimental results are provided for bit rates up to 40 Gb/s.     

Flexible broadcasting and multicasting in 4λ × 10 Gb/s AOPR TWDM PON system

In this letter, we propose a new architecture of Time Wavelength Division Multiplexing Passive Optical Network (TWDM PON) system to support dynamic multi wavelength allocation (DMWA) in both upstream and downstream directions using an integrated semiconductor optical amplifier (SOA) and arrayed waveguide grating (AWG) with multi wavelength select continuous wave (CW) pump probe signal module. The significance of this architecture is the flexible routing function with the capability of multicasting and broadcasting between multiple optical line terminal (OLT) PON port with multiple optical distribution network (ODN) link using a new wavelength tuning free (WTF) OLT transmitter module to eliminate wavelength tuning delay in downstream signal utilizing multicasting Cross Gain Modulation (XGM) wavelength conversion. The experimental results show that 4λ × 10-Gb/s TWDM PON system can be used to connect 4096 users with the conventional fixed wavelength OLT transceivers with 36 dB link loss.