Dussertite BaFe3+3(AsO4)2(OH)5—a Raman spectroscopic study of a hydroxy‐arsenate mineral

The mineral dussertite, a hydroxy‐arsenate mineral with formula BaFe³⁺₃(AsO₄)₂(OH)₅, has been studied by Raman spectroscopy complemented with infrared spectroscopy. The spectra of three minerals from different origins were investigated and proved to be quite similar, although some minor differences were observed. In the Raman spectra of the Czech dussertite, four bands are observed in the 800–950 cm⁻¹ region. The bands are assigned as follows: the band at 902 cm⁻¹ is assigned to the (AsO₄)³⁻ν₃ antisymmetric stretching mode, the one at 870 cm⁻¹ to the (AsO₄)³⁻ν₁ symmetric stretching mode, and those at 859 and 825 cm⁻¹ to the As‐OM^{2 + /3+} stretching modes and/or hydroxyl bending modes. Raman bands at 372 and 409 cm⁻¹ are attributed to the ν₂ (AsO₄)³⁻ bending mode and the two bands at 429 and 474 cm⁻¹ are assigned to the ν₄ (AsO₄)³⁻ bending mode. An intense band at 3446 cm⁻¹ in the infrared spectrum and a complex set of bands centred upon 3453 cm⁻¹ in the Raman spectrum are attributed to the stretching vibrations of the hydrogen‐bonded (OH)⁻ units and/or water units in the mineral structure. The broad infrared band at 3223 cm⁻¹ is assigned to the vibrations of hydrogen‐bonded water molecules. Raman spectroscopy identified Raman bands attributable to (AsO₄)³⁻ and (AsO₃OH)²⁻ units. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the tellurite minerals: emmonsite Fe23+Te34+O9·2H2O and zemannite Mg0.5[Zn2+Fe3+(TeO3)3]4.5H2O

Raman spectroscopy has been used to study zemannite Mg_0.5[Zn²⁺Fe³⁺(TeO₃)₃]4.5H₂O and emmonsite Fe₂³⁺Te₃⁴⁺O₉·2H₂O. Raman bands for zemannite and emmonsite, observed at 740 and 650 cm⁻¹ and at 764 and 788 cm⁻¹, respectively, are attributed to the ν₁ (TeO₃)²⁻ symmetric stretching mode. The splitting of the symmetric stretching mode for emmonsite is in harmony with the results of X‐ray crystallography which shows three non‐equivalent TeO₃ units in the crystal structure. Two bands at 658 and 688 cm⁻¹ are assigned to ν₃ (TeO₃)²⁻ anti‐symmetric stretching modes. Raman bands observed at 372 and 408 cm⁻¹ for zemannite and 397 and 414 cm⁻¹ for emmonsite are attributed to the (TeO₃)²⁻ν₂(A₁) bending mode. The two Raman bands at 400 and 440 cm⁻¹ for emmonsite are ascribed to the ν₄(E) bending modes, while the band at 326 cm⁻¹ is due to the ν₂(A₁) bending vibration. Copyright © 2008 John Wiley & Sons, Ltd.     

High‐resolution stimulated Raman spectroscopy and analysis of the ν1 stretching band of GeD4

The high‐resolution stimulated Raman spectrum of the ν₁ band of GeD₄ with natural isotopic abundance germanium has been recorded. It has been analyzed as part of the ν₁/ν₃ stretching dyad. The ν₁ and ν₃ band centers have been deduced for all the isotopologues. Copyright © 2006 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the sulfite‐bearing minerals scotlandite,hannebachite and orschallite: implications for the desulfation of soils

The structures of the naturally occurring sulfite‐bearing minerals scotlandite, hannebachite and orschallite have been studied by Raman spectroscopy. Raman bands are observed for scotlandite PbSO₃ at 935, 880, 622 and 474 cm⁻¹ and are assigned to the (SO₃)²⁻ν₁(A₁), ν₃(E), ν₂(A₁) and ν₄(E) vibrational modes, respectively. For hannebachite (CaSO₃)₂·H₂O these bands are observed at 1005, 969 and 655 cm⁻¹ with multiple bands for the ν₄(E) mode at 444, 492 and 520 cm⁻¹. The Raman spectrum of hannebachite is very different from that of the compound CaSO₃·2H₂O. It is proposed, on the basis of Raman spectroscopy, that in the mineral hannebachite, the sulfite anion bonds to Ca through the sulfur atom. The Raman spectrum of the mineral orschallite Ca₃[SO₄](SO₃)₂·12H₂O is complex resulting from the overlap of sulfate and sulfite bands. Raman bands at 1005 cm⁻¹, 1096 and 1215 cm⁻¹ are assigned to the (SO₄)²⁻ν₁ symmetric and ν₃ asymmetric stretching modes. The two Raman bands at 971 and 984 cm⁻¹ are attributed to the (SO₃)²⁻ν₃(E) and ν₁(A₁) stretching vibrations. The formation of sulfite compounds in nature offers a potential mechanism for the removal of sulfates and sulfites from soils. Copyright © 2008 John Wiley & Sons, Ltd.     

High‐resolution stimulated Raman spectroscopy and analysis of the 2ν10 overtone symmetric motion of C2H4

The high‐resolution stimulated Raman spectrum of the 2ν₁₀ band located at 1664.16 cm⁻¹ of C₂H₄ has been reanalyzed, thanks to the tensorial formalism developed in Dijon for X₂Y₄ asymmetric‐top molecules. A total of 191 lines were assigned and fitted as a single band without including perturbations such as Fermi or Coriolis coupling constants. We obtained a global root mean square deviation of 8.5 × 10⁻³ cm⁻¹. Further investigations are required to include interactions with the ν₂ and ν₇ + ν₁₀ bands. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydrogen‐arsenate mineral pharmacolite Ca(AsO3OH)·2H2O—implications for aquifer and sediment remediation

The removal of arsenate anions from aqueous media, sediments and wasted soils is of environmental significance. The reaction of gypsum with the arsenate anion results in pharmacolite mineral formation, together with related minerals. Raman and infrared (IR) spectroscopy have been used to study the mineral pharmacolite Ca(AsO₃OH)· 2H₂O. The mineral is characterised by an intense Raman band at 865 cm⁻¹ assigned to the ν₁ (AsO₃)²⁻ symmetric stretching mode. The equivalent IR band is found at 864 cm⁻¹. The low‐intensity Raman bands in the range from 844 to 886 cm⁻¹ provide evidence for ν₃ (AsO₃) antisymmetric stretching vibrations. A series of overlapping bands in the 300‐450 cm⁻¹ region are attributed to ν₂ and ν₄ (AsO₃) bending modes. Prominent Raman bands at around 3187 cm⁻¹ are assigned to the OH stretching vibrations of hydrogen‐bonded water molecules and the two sharp bands at 3425 and 3526 cm⁻¹ to the OH stretching vibrations of only weakly hydrogen‐bonded hydroxyls in (AsO₃OH)²⁻ units. Copyright © 2009 John Wiley & Sons, Ltd.     

A Raman spectroscopic study of the antimony mineral klebelsbergite Sb4O4(OH)2(SO4)

Many minerals based upon antimonite and antimonate anions remain to be studied. Most of the bands occur in the low wavenumber region, making the use of infrared spectroscopy difficult. This problem can be overcome by using Raman spectroscopy. The Raman spectra of the mineral klebelsbergite Sb₄O₄(OH)₂(SO₄) were studied and related to the structure of the mineral. The Raman band observed at 971 cm⁻¹ and a series of overlapping bands are observed at 1029, 1074, 1089, 1139 and 1142 cm⁻¹ are assigned to the SO₄²⁻ν₁ symmetric and ν₃ antisymmetric stretching modes, respectively. Two Raman bands are observed at 662 and 723 cm⁻¹, which are assigned to the Sb O ν₃ antisymmetric and ν₁ symmetric stretching modes, respectively. The intense Raman bands at 581, 604 and 611 cm⁻¹ are assigned to the ν₄ SO₄²⁻ bending modes. Two overlapping bands at 481 and 489 cm⁻¹ are assigned to the ν₂ SO₄²⁻ bending mode. Low‐intensity bands at 410, 435 and 446 cm⁻¹ may be attributed to O Sb O bending modes. The Raman band at 3435 cm⁻¹ is attributed to the O H stretching vibration of the OH units. Multiple Raman bands for both SO₄²⁻ and Sb O stretching vibrations support the concept of the non‐equivalence of these units in the klebelsbergite structure. It is proposed that the two sulfate anions are distorted to different extents in the klebelsbergite structure. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic characterization of CH4 density over a wide range of temperature and pressure

The positions of the CH₄ Raman ν₁ symmetric stretching bands were measured in a wide range of temperature (from −180 °C to 350 °C) and density (up to 0.45 g/cm³) using high‐pressure optical cell and fused silica capillary capsule. The results show that the Raman band shift is a function of both methane density and temperature; the band shifts to lower wavenumbers as the density increases and the temperature decreases. An equation representing the observed relationship among the CH₄ ν₁ band position, temperature, and density can be used to calculate the density in natural or synthetic CH₄‐bearing inclusions. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐resolution stimulated Raman spectroscopy and analysis of the ν1 band of osmium tetroxide

We present the first high‐resolution stimulated Raman study of osmium tetroxide (OsO₄). Lines from the ν₁ totally symmetric stretching fundamental have been assigned. These data together with the infrared assignments of the ν₃ band previously recorded (M. Louviot et al., J. Quant. Spectrosc. Radiat. Transfer, 2012, 113, 119–127) allowed a refinement of the analysis of the ν₁/ν₃ stretching dyad. We found that the ν₁ band has an unusual positive isotopic shift of approximately 0.32 cm^{− 1}/amu, which gives further evidence that the stretching dyad should be perturbed by a complex nearby bending band polyad. This work is part of a global effort to analyze all fundamental bands of OsO₄ to obtain a more precise experimental value of the ground state bond length for this heavy metal‐containing molecule. The result could serve as a benchmark for high‐level quantum chemistry calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Anharmonic resonance interactions in the bending manifold associated with ν3 in 13C2D2 studied by high—resolution infrared and Raman spectroscopy

The Q branch of the 2ν₂ ← ν₂ band of ¹³C₂D₂ has been recorded with an instrumental resolution of about 0.003 cm^?1 using inverse Raman spectroscopy combined with stimulated Raman pumping in order to populate the ν₂=1 state. A weak local perturbation evident in the spectrum has been attributed to the effect of an anharmonic resonance between the ν₂=2 and ν₃=ν₄=ν₅=1 Σ⁺ _g, states. To study this interaction, the components of the latter vibrational manifold (Σ⁺ _g, ^? _g and Δ_g), together with all the bending states up to (ν₄ + ν₅)=2 associated with ν₃=1, have been characterized through the analysis of their infrared spectra. Both cold and hot bands from states thermally populated at room temperature, ν₄, ν₅, 2ν₄, 2ν₅ and ν₄ + ν₅, have been recorded in the region between 2300 and 3000 cm^?1 at an effective resolution of about 0.009 cm^?1. A simultaneous analysis of all the assigned transitions has been performed on the basis of a theoretical model which takes into account the rotational and vibrational ?-type resonances within each vibrational manifold, the Darling-Dennison anharmonic resonance between the ν₃ + 2ν₄ and ν₃ + 2ν₅ states, and the anharmonic interaction between the 2ν₂ and ν₃ + ν₄ + ν₅ states.     

Raman spectroscopic study of the mixed anion sulphate–arsenate mineral parnauite Cu9[(OH)10|SO4|(AsO4)2]·7H2O

The mixed anion mineral parnauite Cu₉[(OH)₁₀|SO₄|(AsO₄)₂]·7H₂O has been studied by Raman spectroscopy. Characteristic bands associated with arsenate, sulphate and hydroxyl units are identified. Broad bands are observed and are resolved into component bands. Two intense bands at 859 and 830 cm⁻¹ are assigned to the ν₁ (AsO₄)³⁻ symmetric stretching and ν₃ (AsO₄)³⁻ antisymmetric stretching modes. The comparatively sharp band at 976 cm⁻¹ is assigned to the ν₁ (SO₄)²⁻ symmetric stretching mode and a broad‐spectral profile centered upon 1097 cm⁻¹ is attributed to the ν₃ (SO₄)²⁻ antisymmetric stretching mode. A comparison of the Raman spectra is made with other arsenate‐bearing minerals such as carminite, clinotyrolite, kankite, tilasite and pharmacosiderite. Copyright © 2009 John Wiley & Sons, Ltd.     

High‐resolution stimulated Raman spectroscopy and analysis of the ν1/ν5 (C–H) stretching dyad of C2H4

The high‐resolution stimulated Raman spectra of the ν₁/ν₅ C–H stretching bands of C₂H₄ have been recorded and analyzed by means of the tensorial formalism developed in Dijon for X₂Y₄ asymmetric‐top molecules. A total of 689 lines (428 for ν₅ and 261 for ν₁) were assigned and fitted as a dyad including Coriolis coupling constants. We obtained a global root mean square deviation of 4.39 × 10^{− 3} cm^{− 1} (4.61 × 10^{− 3} cm^{− 1} for ν₁, 4.25 × 10^{− 3} cm^{− 1} for ν₅). The nearby 2ν₂ band, extrapolated from ν₂, was included in the analysis. However, no interaction parameter involving it could be fitted. The analysis is quite satisfactory, although some parts of ν₅ are not very well reproduced, probably indicating some yet unidentified resonances. This region is indeed quite dense, with many interacting dark states that cannot be included at present. Copyright © 2012 John Wiley & Sons, Ltd.     

Raman spectroscopy of halogen‐containing carbonates

Raman spectroscopy complemented with infrared spectroscopy has been used to study a series of selected natural halogenated carbonates from different origins, including bastnasite, parisite and northupite. The position of CO₃²⁻ symmetric stretching vibration varies with the mineral composition. An additional band for northupite at 1107 cm⁻¹ is observed. Raman spectra of bastnasite, parisite and northupite show single bands at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ asymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the CaO₆ octahedron. No ν₂ Raman bending modes are observed for these minerals. The band is observed in the infrared spectra, and multiple ν₂ modes at 844 and 867 cm⁻¹ are observed for parisite. A single intense infrared band is found at 879 cm⁻¹ for northupite. Raman bands are observed forthe carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for selected bastansites and parisites, indicating the presence of water and OH units in the mineral structure. The presence of such bands brings into question the actual formula of these halogenated carbonate minerals. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the phosphate mineral churchite‐(Y) YPO4·2H2O

Raman spectroscopy has been used to study the rare‐earth mineral churchite‐(Y) of formula (Y,REE)(PO₄) ·2H₂O, where rare‐earth element (REE) is a rare‐earth element. The mineral contains yttrium and, depending on the locality, a range of rare‐earth metals. The Raman spectra of two churchite‐(Y) mineral samples from Jáchymov and Medvědín in the Czech Republic were compared with the Raman spectra of churchite‐(Y) downloaded from the RRUFF data base. The Raman spectra of churchite‐(Y) are characterized by an intense sharp band at 975 cm⁻¹ assigned to the ν₁ (PO₄³⁻) symmetric stretching mode. A lower intensity band observed at around 1065 cm⁻¹ is attributed to the ν₃ (PO₄³⁻) antisymmetric stretching mode. The (PO₄³⁻) bending modes are observed at 497 cm⁻¹ (ν₂) and 563 cm⁻¹ (ν₄). Some small differences in the band positions between the four churchite‐(Y) samples from four different localities were found. These differences may be ascribed to the different compositions of the churchite‐(Y) minerals. Copyright © 2009 John Wiley & Sons, Ltd.     

Natural halotrichites—an EDX and Raman spectroscopic study

Raman spectroscopy has been used to characterise four natural halotrichites: halotrichite FeSO₄.Al₂(SO₄)₃. 22H₂O, apjohnite MnSO₄.Al₂(SO₄)₃.22H₂O, pickingerite MgSO₄.Al₂(SO₄)₃.22H₂O and wupatkiite CoSO₄.Al₂(SO₄)₃.22H₂O. A comparison of the Raman spectra is made with the spectra of the equivalent synthetic pseudo‐alums. Energy dispersive X‐ray analysis (EDX) was used to determine the exact composition of the minerals. The Raman spectrum of apjohnite and halotrichite display intense symmetric bands at ∼985 cm⁻¹ assigned to the ν₁(SO₄)²⁻ symmetric stretching mode. For pickingerite and wupatkiite, an intense band at ∼995 cm⁻¹ is observed. A second band is observed for these minerals at 976 cm⁻¹ attributed to a water librational mode The series of bands for apjohnite at 1104, 1078 and 1054 cm⁻¹, for halotrichite at 1106, 1072 and 1049 cm⁻¹, for pickingerite at 1106, 1070 and 1049 cm⁻¹ and for wupatkiite at 1106, 1075 and 1049 cm⁻¹ are attributed to the ν₃(SO₄)²⁻ antisymmetric stretching modes of ν₃(B_g) SO₄. Raman bands at around 474, 460 and 423 cm⁻¹ are attributed to the ν₂(A_g) SO₄ mode. The band at 618 cm⁻¹ is assigned to the ν₄(B_g) SO₄ mode. The splitting of the ν₂, ν₃ and ν₄ modes is attributed to the reduction of symmetry of the SO₄ and it is proposed that the sulphate coordinates to water in the hydrated aluminium in bidentate chelation. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermo‐Raman spectroscopy of synthetic nesquehonite — implication for the geosequestration of greenhouse gases

Pure nesquehonite (MgCO₃·3H₂O)/Mg(HCO₃)(OH)·2H₂O was synthesised and characterised by a combination of thermo‐Raman spectroscopy and thermogravimetry with evolved gas analysis. Thermo‐Raman spectroscopy shows an intense band at 1098 cm⁻¹, which shifts to 1105 cm⁻¹ at 450 °C, assigned to the ν₁CO₃²⁻ symmetric stretching mode. Two bands at 1419 and 1509 cm⁻¹ assigned to the ν₃ antisymmetric stretching mode shift to 1434 and 1504 cm⁻¹ at 175 °C. Two new peaks at 1385 and 1405 cm⁻¹ observed at temperatures higher than 175 °C are assigned to the antisymmetric stretching modes of the (HCO₃)⁻ units. Throughout all the thermo‐Raman spectra, a band at 3550 cm⁻¹ is attributed to the stretching vibration of OH units. Raman bands at 3124, 3295 and 3423 cm⁻¹ are assigned to water stretching vibrations. The intensity of these bands is lost by 175 °C. The Raman spectra were in harmony with the thermal analysis data. This research has defined the thermal stability of one of the hydrous carbonates, namely nesquehonite. Thermo‐Raman spectroscopy enables the thermal stability of the mineral nesquehonite to be defined, and, further, the changes in the formula of nesquehonite with temperature change can be defined. Indeed, Raman spectroscopy enables the formula of nesquehonite to be better defined as Mg(OH)(HCO₃)·2H₂O. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydroxy‐arsenate‐sulfate mineral chalcophyllite Cu18Al2(AsO4)4(SO4)3(OH)24·36H2O

The mixed anion mineral chalcophyllite Cu₁₈Al₂(AsO₄)₄(SO₄)₃(OH)₂₄·36H₂O has been studied by using Raman and infrared spectroscopies. Characteristic bands associated with arsenate, sulfate and hydroxyl units are identified. Broad bands in the OH stretching region are observed and are resolved into component bands. Estimates of hydrogen bond distances were made using a Libowitzky function. Both short and long hydrogen bonds were identified. Two intense bands at 841 and ∼814 cm⁻¹ are assigned to the ν₁ (AsO₄)³⁻ symmetric stretching and ν₃ (AsO₄)³⁻ antisymmetric stretching modes. The comparatively sharp band at 980 cm⁻¹ is assigned to the ν₁ (SO₄)²⁻ symmetric stretching mode, and a broad spectral profile centred upon 1100 cm⁻¹ is attributed to the ν₃ (SO₄)²⁻ antisymmetric stretching mode. A comparison of the Raman spectra is made with other arsenate‐bearing minerals such as carminite, clinotyrolite, kankite, tilasite and pharmacosiderite. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the multi‐anion mineral dixenite CuMn2+14Fe3+(AsO3)5(SiO4)2(AsO4)(OH)6

The mixed anion mineral dixenite has been studied by Raman spectroscopy, complemented with infrared spectroscopy. The Raman spectrum of dixenite shows bands at 839 and 813 cm⁻¹ assigned to the (AsO₃)³⁻ symmetric and antisymmetric stretching modes. The most intense Raman band of dixenite is the band at 526 cm⁻¹ and is assigned to the ν₂ AsO₃³⁻ bending mode. DFT calculations enabled the calculation of the position of AsO₂²⁻ symmetric stretching mode at 839 cm⁻¹, the antisymmetric stretching mode at 813 cm⁻¹, and the deformation mode at 449 cm⁻¹. The Raman bands at 1026 and 1057 cm⁻¹ are assigned to the SiO₄²⁻ symmetric stretching vibrations and those at 1349 and 1386 cm⁻¹ to the SiO₄²⁻ antisymmetric stretching vibrations. Both Raman and infrared spectra indicate the presence of water in the structure of dixenite. This brings into question the commonly accepted formula of dixenite as CuMn²⁺₁₄Fe³⁺(AsO₃)₅(SiO₄)₂(AsO₄)(OH)₆. The formula may be better written as CuMn²⁺₁₄Fe³⁺(AsO₃)₅(SiO₄)₂(AsO₄)(OH)₆·xH₂O. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the mixed anion mineral yecoraite Bi5Fe3O9(Te4+O3)(Te6+O4)2·9H2O

Tellurates are rare minerals as the tellurate anion is readily reduced to the tellurite ion. Often minerals with both tellurate and tellurite anions are found. An example of such a mineral containing tellurate and tellurite is yecoraite. Raman spectroscopy has been used to study this mineral, the exact structure of which is unknown. Two Raman bands at 796 and 808 cm⁻¹ are assigned to the ν₁(TeO₄)²⁻ symmetric and ν₃(TeO₃)²⁻ antisymmetric stretching modes and Raman bands at 699 cm⁻¹ are attributed to the ν₃(TeO₄)²⁻ antisymmetric stretching mode and the band at 690 cm⁻¹ to the ν₁(TeO₃)²⁻ symmetric stretching mode. The intense band at 465 cm⁻¹ with a shoulder at 470 cm⁻¹ is assigned the (TeO₄)²⁻ and (TeO₃)²⁻ bending modes. Prominent Raman bands are observed at 2878, 2936, 3180 and 3400 cm⁻¹. The band at 3936 cm⁻¹ appears quite distinct and the observation of multiple bands indicates the water molecules in the yecoraite structure are not equivalent. The values for the OH stretching vibrations listed provide hydrogen bond distances of 2.625 Å (2878 cm⁻¹), 2.636 Å (2936 cm⁻¹), 2.697 Å (3180 cm⁻¹) and 2.798 Å (3400 cm⁻¹). This range of hydrogen bonding contributes to the stability of the mineral. A comparison of the Raman spectra of yecoraite with that of tellurate containing minerals kuranakhite, tlapallite and xocomecatlite is made. Copyright © 2009 John Wiley & Sons, Ltd.