Antibacterial studies of bio-functionalized carbon decorated silver nanoparticles (AgNPs)

In the present report, Lemon juice (bio-extract) extract was efficaciously used for the synthesis of bio-functionalized silver nanoparticles (Ag-1, Ag-2 & Ag-3 NPs) and decorated with carbon material obtained from mustard oil. The morphology, size, crystal structure, formation and interaction were studied by means of innumerable analytical methods including scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. The XRD results approve the formation of AgNPs with face-centered cubic (fcc) lattice. The XRD results also exhibit some unassigned peaks which might be due to the presence of bio-organic materials on the surface of AgNPs. The bands observed from the IR spectra showing the involvement of biomolecules onto the surface of silver nanoparticles. Mostly citric acid plays a major role in bio-reduction, capping agent, and stabilization of silver ions. We attained maximal inhibition zone (2.10 ​± ​0.05 and 2.03 ​± ​0.027) counter to gram-negative bacteria K. pneumoniae and P. bacilli with Ag-3 respectively, but lowest inhibition zone (1.27 ​± ​0.22) contrary to S. aureus as a gram-positive bacteria with Ag-2.     

Biogenic Synthesis of NiO Nanoparticles Using Areca catechu Leaf Extract and Their Antidiabetic and Cytotoxic Effects

Nanoworld is an attractive sphere with the potential to explore novel nanomaterials with valuable applications in medicinal science. Herein, we report an efficient and ecofriendly approach for the synthesis of Nickel oxide nanoparticles (NiO NPs) via a solution combustion method using Areca catechu leaf extract. As-prepared NiO NPs were characterized using various analytical tools such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-Visible spectroscopy (UV-Vis). XRD analysis illustrates that synthesized NiO NPs are hexagonal structured crystallites with an average size of 5.46 nm and a hexagonal-shaped morphology with slight agglomeration. The morphology, size, and shape of the obtained material was further confirmed using SEM and TEM analysis. In addition, as-prepared NiO NPs have shown potential antidiabetic and anticancer properties. Our results suggest that the inhibition of α-amylase enzyme with IC 50 value 268.13 µg/mL may be one of the feasible ways through which the NiO NPs exert their hypoglycemic effect. Furthermore, cytotoxic activity performed using NiO NPs exhibited against human lung cancer cell line (A549) proved that the prepared NiO NPs have significant anticancer activity with 93.349 μg/mL at 50% inhibition concentration. The biological assay results revealed that NiO NPs exhibited significant cytotoxicity against human lung cancer cell line (A549) in a dose-dependent manner from 0–100 μg/mL, showing considerable cell viability. Further, the systematic approach deliberates the NiO NPs as a function of phenolic extracts of A. catechu with vast potential for many biological and biomedical applications.     

Ultrasonic assisted synthesis of nanocrystalline cellulose as support and reducing agent for Ag nanoparticles: green synthesis and novel effective nanocatalyst for degradation of organic dyes

In this study, nanocrystalline cellulose (NCC) prepared from microcrystalline cellulose using high‐intensity ultrasonication as mechanical method without any chemical treatment. The obtained NCC with around 30–50 nm diameters, utilized as support, reducing and stabilizing agent for in‐situ green and eco‐friendly synthesis of silver nanoparticles (Ag NPs). The catalytic activity of composite was examined for degradation of environmental pollutants. The structure of as‐synthesized composite (Ag@NCC) was characterized by ultraviolet–visible spectroscopy (UV–vis), field emission scanning electron microscopy (FE‐SEM); Transmission electron microscopy (TEM); Energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The results of the catalytic reaction experiments showed that spherically shaped silver nanoparticles of around 20 nm distributed on the surface of nanocellulose demonstrated high catalytic efficiency towards the removal of methyl orange (MO) and 4‐nitrophenol (4‐NP).     

Green synthesis and characterization of Fe doped ZnO nanoparticles and their interaction with bovine serum albumin

Herein we report an eco-friendly and cost efficient synthesis of Fe doped ZnO (TPFZO) nanoparticles using the extract of Thespesia polpulanea flowers as a stabilizing agent. The synthesized NPs have been characterized by XRD, FT-IR, UV-DRS, SEM, EDAX and TEM studies. The synthesized NPs were found to have the crystallite size in the range of 30–60 ​nm. The calculated band gap energies for ZO and TPFZO nanoparticles were 3.00 ​eV and 1.97 ​eV respectively. The size distribution of the ZO and TPFZO obtained from TEM were observed to be lying in the range 50–120 ​nm and 4–22 ​nm respectively. The interaction of TPFZO NPs with bovine serum albumin (BSA) has been studied using fluorescence and absorption titration methods. The results indicated that the nanoparticles quenched the BSA fluorescence at 340 ​nm via static quenching mode having a bimolecular quenching rate constant value of 6.21 ​× ​10¹³ Lmol⁻¹s⁻¹.     

Zinc oxide nanoparticles synthesized using Oldenlandia Umbellata leaf extract and their photocatalytic and biological characteristics

The aim of this study was to examine the environmentally friendly green production of zinc oxide nanoparticles (ZnO NPs) utilizing Oldenlandia Umbellata (OU) leaves extract, as well as to study the photo catalytic and biological activities of these particles. XRD, UV-Visible, FT-IR, SEM, EDAX, TEM and Zeta potential studies were used to investigate the purity and properties of as synthesized ZnO NPs. From the FT-IR investigations presenting functional groups were verified. The hexagonal form and wurtzite crystal nature were confirmed by SEM and XRD photographs. The decreasing zeta potential of ?23.7 mV suggested the stability of OU-ZnO NPs, which was validated by Zeta potential and EDAX measurements. The OU-ZnO NPs' photo catalytic activity was also examined using their methylene red dye degradation potential. It also has a DPPH test that revealed it had a 66% radical scavenging activity. Furthermore, this substance was proven to be an effective anti-fungal agent against Candida albicans, which demonstrated a maximum mycelial inhibition of 12.5 ± 0.7. Additionally, the biosynthesized nanoparticles had high antibacterial activity verses all of the microbiological strains tested to varying degrees.     

Photo-catalytic degradation of different toxic dyes using silver nanoparticles as photo-catalyst,mediated via Citrus aurantium peels extract

Green synthesis of silver nanoparticles was accomplished using peels (rind) extract of Citrus aurantium as a reducing as well as capping agent. Biosynthesized AgNPs (silver nanoparticle) has been characterized via UV–Visible spectroscopy, XRD, SEM, EDAX, TEM and TGA. The observed UV–Vis analysis resulted in the formation of characteristic surface plasmon resonance absorption band centered at 465 ​nm. The observed XRD patterns, having hkl values (111), (200), (220) and (222), confirms the cubic crystalline structure of AgNPs. The average grain size 9.5 ​μm was observed by the SEM technique. Bio synthesized AgNPs were efficiently degrading the methylene blue dye nearly 95.35% in 98 ​h of exposure time. It also degraded acridine orange dye 87.34% and rose bengal dye 90.09% followed by 4h of continuous UV absorption. It also degrades methyl orange dye nearly 51% in 10h of solar irradiation. Synthesized AgNPs can be used as photo-catalyst for degrading toxic dyes.     

Facile Synthesis of BiOI Nanoparticles at Room Temperature and Evaluation of their Photoactivity Under Sunlight Irradiation

In this study, highly photoactive BiOI nanoparticles (NPs) under sunlight irradiation were synthesized by a facile precipitation method using polyvinylpyrrolidone (PVP) at room temperature. The as‐prepared catalysts were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) and UV–vis diffuse reflectance spectra (UV–vis DRS). The results of XRD showed that PVP did not have any significant effect on tetragonal crystalline structure of BiOI. Also, using different amounts of PVP in the synthesis led to different morphologies and sizes of BiOI particles. It was found that using 0.2 g of PVP in the synthesis method changed morphology from 1‐μm platelets to NPs with size under 10 nm. In addition, the photocatalytic performance of prepared photocatalysts was evaluated in the photodegradation of reactive blue 19 (RB19) dye under sunlight irradiation. The BiOI synthesized using 0.2 g PVP (BiOI0.2) showed higher degradation efficiency compared to BiOI prepared without any additive. Excellent visible light photocatalytic properties of nano‐scaled BiOI0.2 samples compared to BiOI platelets could be attributed to higher surface‐to‐volume ratio and narrow band‐gap energy of as‐prepared BiOI0.2 NPs.     

Research article green synthesis of zirconium oxide nanoparticles (ZrO2NPs) using Helianthus annuus seed and their antimicrobial effects

Monoclinic Zirconia (ZrO₂NPs) nanoparticles were successfully prepared by non-toxic and low-cost production using green synthesis analysis from the methanolic extract of Helianthus annuus (sunflower) seeds as the reducing agent. Mechanism of the chemical reaction has shown the reduction and which confirmed the formation of nanoparticles via chemical bonding in the IR spectrum at 502-498 ​cm^-1 ZrO₂ nanoparticles were characterized as sharp peak at 275 ​nm in the UV-Vis spectrum with 3.7eV in photon energy bandgap, it confirms the monoclinic crystal structure, as well as x-ray diffractometry, reveals zirconia crystallite is 40.59 ​nm. The internal morphology of crystal structure is exhibited by Scanning Electron Microscopy (SEM), and Transmission Electron Microscope (TEM). The stability of nanoparticles is represented in terms of zeta potential (-9.32 ​mV) and particle size distribution (~331 ​nm). Biosynthesized ZrO₂NPs were indicated as superior antimicrobial activity for biomedical applications.     

Preparation and Characterization of NiO Nanoparticles Via Solid-State Thermal Decomposition of Nickel(II) Schiff Base Complexes [Ni(salophen)] and [Ni(Me-salophen)]

This study focuses on the preparation and characterization of nickel oxide nanoparticles from nickel(II) Schiff base complexes as new precursors. At first nickel(II) complexes [Ni(salophen)] and [Ni(Me-salophen)] were synthesized and characterized by elemental analyses and FT-IR spectroscopy. Then NiO nanoparticles were prepared by solid-state thermal decomposition at 550 ºC for 3.5 h. The FT-IR spectrum confirmed the composition of products. The crystalline structures and morphology of products were studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). XRD results revealed that the obtained products were nickel oxide. SEM and TEM images demonstrated that the NiO nanoparticles have uniform shape with size between 35 and 70 nm.     

Nano NiO/AlMCM‐41, a green synergistic,highly efficient and recyclable catalyst for the reduction of nitrophenols

Highly ordered mesoporous molecular sieves AlMCM‐41 and a new NiO/AlMCM‐41 nanocomposite were synthesized using a sol–gel method. Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and N₂ adsorption desorption analyses were used to examine the structure, morphology, size and phase composition of the synthesized NiO/AlMCM‐41 nanocomposites. AlMCM‐41 embedded with NiO nanoparticles was subsequently prepared using different nickel loadings in a direct synthetic route. The results show the successful deposition of NiO nanoparticles onto the framework of AlMCM‐41. AlMCM‐41 provides enormous benefits such as environmentally safe, economic viability and porosity when used as support for NiO nanoparticles. The excellent catalytic activities of AlMCM‐41 and NiO/AlMCM‐41 were investigated for the reduction of nitrophenols (4‐NP, 2‐NP) to aminophenols (4‐AP, 2‐AP) in water at ambient temperature. The best observed performance of reduction of NP with 100% conversion into analogous amino derivatives occurred within 6 min with an estimated rate constant of 0.46 min^?1. The efficiency of reduction was observed to increase as a function of NiO enrichment. The NiO/AlMCM‐41 nanocomposite could be recycled and reused up to five times without noticeable change in its structure and activity. These properties make NiO/AlMCM‐41 nanocomposite an ideal platform to study various heterogeneous catalytic processes which can have application in purification, catalysis, sensing devices, and green chemistry.     

Synthesis,structural characterization and reactivity of manganese tungstate nanoparticles in the oxidative degradation of methylene blue

Nanoparticles of manganese tungstate (MnWO₄) were prepared via an impregnation method using Mn(NO₃)₂·4H₂O and WO₃ as a source of Mn and W, respectively. The morphology of the manganese tungstate nanoparticles was studied in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). MnWO₄ nanoparticles showed severe catalytic performances for the degradation of organic dye (methylene blue, MB) in the presence of tert-butyl hydrogen peroxide, TBHP, as the oxidant at room temperature in water.     

Photodegradation of orange II dye using p-n junction NiO/TiO2 composite,and assessment of its biological activities

The chemical reduction method was used to synthesize nickel oxide particles (NiO) and NiO supported on titanium dioxide (NiO/TiO₂ nanocomposite). The composites were characterized through scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) analysis. The morphological investigation showed that pseudocubic NiO are present in dispersed as well as agglomerated forms. Whereas NiO particles (<200 nm) are evenly deposited over the surface of TiO₂ in NiO/TiO₂ composite. The formation of NiO and NiO/TiO₂ was also verified by XRD analysis. The synthesized NiO and NiO/TiO₂ were used as photocatalysts for the degradation of Orange II (OII) dye. According to the degradation investigation, both NiO and NiO/TiO₂ composite degraded OII dye more efficiently when exposed to UV light. The results indicated that NiO degraded 93% and NiO/TiO₂ composites degraded approximately 96% of OII dye within 30 min. Both photocatalysts are highly sustainable and have significant OII dye degradation recyclability. Moreover, NiO and NiO/TiO₂ exhibited promising bioactivities (antioxidant activity of 80%) against the pathogenic bacteria Citrobacter and Providencia, which is comparable with the standard ascorbic acid (88%).     

Highly Porous Amidoximed Carbon Nanofibers Supported Palladium(0) Nanoparticle Catalyzed Heck Reaction

Highly porous amidoximed carbon nanofibers(AOCNFs), which were fabricated via a conventional electrospinning technique followed by chemically modification, impregnation-reduction and carbonization process, had been used for the immobilization of palladium nanoparticles(Pd NPs) catalyst. During the carbonization process, polystyrene(PS) was selectively decomposed from bicomponent fibers, generating porous fibers. Fourier transform infrared spectroscopy(FTIR) result revealed the functional groups on PAN-PS fibers(PAN=polyacrylonitrile), AOPAN-PS fibers and AOCNFs; scanning electron microscopy(SEM) was used to observe the morphology of all stages of nanofibers; transmission electron microscopy(TEM) result gave the structure of through-hole morphology clearly visible and the dispersion of Pd NPs on the surface of nanofibers; and X-ray photoelectron spectra(XPS) confirmed that Pd nanoparticles on the surface of AOCNFs was of the metallic state. Moreover, the as-prepared catalyst exhibited high catalytic activity and efficient recycle for Heck coupling reactions between iodobenzene and acrylates.     

高活性、可循环的Pt-Cu@3D石墨烯复合催化剂的制备和催化性能

A composite hydrogel consisting of well-dispersed Pt-Cu nanoparticles (NPs) supported on three-dimensional (3D) graphene (Pt-Cu@3DG) was successfully prepared by mild chemical reduction. The 3D interconnected macroporous structure of the graphene framework not only possesses large specific surface area that allows high metal loadings, but also facilitates mass transfer during the catalytic reaction. The Pt-Cu bimetallic alloy NPs show good catalytic activity compared with Pt NPs and reduce the content of Pt NPs used, thereby lowering costs. The morphology and composition of the Pt-Cu@3DG composite were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). The catalysis studies indicate that the resulting composites can be used as an efficient, inexpensive, recyclable, and stable catalyst for the reduction of 4-nitrophenol to 4-aminophenol under mild conditions.     

Fabrication of a novel glucose biosensor based on a highly electroactive polystyrene/polyaniline/Au nanocomposite

A novel nanocomposite with a core-shell structure containing polystyrene (PS), polyaniline (PANI), and Au nanoparticles (NPs) was synthesized. The nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). Cyclic voltammetric experiments indicated that the nanocomposite had excellent redox ability in a wide range of pH values. The existence of Au NPs resulted in a higher electrical conductivity of the nanocomposite. As a model, glucose oxidase (GOD) was entrapped onto the nanocomposite-modified glassy carbon electrode (GCE) and applied to construct a sensor. The immobilized GOD showed a pair of well-defined redox peaks and high catalytic activity for the oxidation of glucose.     

多级结构Ni@CuS复合物的合成及在提高催化还原4-硝基苯酚性能方面的应用

三种多级结构花状硫化铜通过水热法,利用纳米薄片自组装形成.加入有机分子聚乙烯吡咯烷酮或1, 3, 5-均苯三甲酸调控其片层密度.产物作为基板生长镍纳米颗粒.通过环境扫描电子显微镜(SEM), X射线衍射(XRD),透射电子显微镜(TEM)等对这种复合物的结构进行表征.利用紫外-可见吸收光谱,研究了产物作为催化剂催化还原4-硝基苯酚的性能.结果表明,长在具有最稀疏片层的样品(Ni@SUB2)上的镍纳米颗粒(NiNPs,直径5 nm左右)具有超低负载量,为0.469% (w). Ni@SUB2在三种Ni@SUB复合物中具有最好的催化性能.还原4-硝基苯酚的反应中, 4-硝基酚初始浓度为0.2 mmol·L^-1时Ni@SUB2在4 min中内转化率可以实现100%,而等量的纯Ni纳米颗粒转化率只有43%.增强的催化性能可以归结为镍纳米颗粒在硫化铜基板上得到良好分散,可以提供更多催化位点.同时硫化铜基板不溶于水,可以通过离心的方式回收催化剂,有利于环境保护.     

PAMAM (poly-amido amine) dendrimer supported copper nanoparticles for chemoselective nitro reduction

Present paper reports the synthesis of biocompatible poly (amidoamine) (PAMAM) dendrimer by Michael addition (up to Generation 2) which has been used as a matrix for preparing copper nanoparticles using green solvent. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy – dispersive X-ray spectroscopy (EDX) were used to determine the surface morphology and elemental composition of the nanoparticle. The results confirmed the FCC structure of the prepared dendrimer encapsulated Cu nanoparticles with an average crystallite size of 4 ​nm. Purely aqueous-phase chemoselective reduction of nitro group in various aromatic nitro substrates such as p-nitrophenol, p-nitrobenzaldehyde and 2, 4 dinitrophenol have been employed in the presence of eco-friendly dendrimer encapsulated Cu nanoparticles using hydrazine hydrate as reducing agent. The nanocatalyst showed high reusability up to seven runs exhibiting no significant loss in its catalytic activity. As the synthesised material is found to be biocompatible, this catalytic strategy can be used to catalyse similar biochemical reactions.     

MOF-derived hollow NiO–ZnO composite micropolyhedra and their application in catalytic thermal decomposition of ammonium perchlorate

Ni(II)-doped Zn-based coordination polymer particles (Ni(II)-doped Zn-CPPs) with controllable shape and size were successfully synthesized by solvothermal method, which further transformed to porous ZnO–NiO composite micropolyhedra without significant alterations in shape by calcination in air. Those products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), infrared spectroscopy (IR) and gas adsorption measurements. The catalytic activity of ZnO–NiO composites for the thermal decomposition of ammonium perchlorate (AP) was investigated. The result shows that all ZnO–NiO composites efficiently catalyzed the thermal decomposition of AP, and NiO–ZnO composite hollow octahedrons have the highest catalytic efficiency compared with that of most materials reported to now, indicating that porous ZnO–NiO composite micropolyhedra could be a promising candidate material for application in AP-based propellant.     

Facile combustion synthesis of Ag2O nanoparticles using cantaloupe seeds and their multidisciplinary applications

Silver oxide nanoparticles (Ag₂O NPs) were prepared using cantaloupe (Cucumis melo) seeds as a fuel by employing a green synthesis method. The prepared Ag₂O NPs were investigated using powder X-ray diffraction (PXRD), UV–visible spectrum, Fourier transform infrared analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy-dispersive spectroscopy, and photoluminescence studies. PXRD data reveal the establishment of cubic crystal structure of Ag₂O NPs. According to SEM and TEM results, the morphology of the prepared NPs was agglomerated and spherical. The photodegradation activity of the prepared Ag₂O NPs over methylene blue dye was promising under visible light irradiation. Furthermore, the antimicrobial assay of the synthesized Ag₂O NPs was carried out by the disc diffusion method against Gram-positive and Gram-negative microbial strains.     

The surface modification of spherical ZnO with Ag nanoparticles: A novel agent,biogenic synthesis,catalytic and antibacterial activities

Nowadays, the industrial wastewater pollutants including toxic dyes and pathogenic microbes have caused serious environmental contaminations and human health problems. In the present study, eco-friendly and facile green synthesis of Ag modified ZnO nanoparticles (ZnO-Ag NPs) using Crataegus monogyna (C. monogyna) extract (ZnO-Ag@CME NPs) is reported. The morphology and structure of the as-biosynthesized product were characterized by field emission scanning electron microscopy (FESEM), X-Ray diffraction (XRD), differential reflectance spectroscopy (DRS), dynamic light scattering (DLS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), and energy-dispersive X-ray spectroscopy (EDS) techniques. TEM and FESEM images confirmed the oval and spherical-like structure of the products with a size of 55–70 nm. The EDS analysis confirmed the presence of Zn, Ag, and O elements in the biosynthesized product. The photocatalytic results showed ZnO-Ag@CME NPs were degraded (89.8% and 75.3%) and (94.2% and 84.7%) of methyl orange (MO) and basic violet 10 (BV10), under UV and sunlight irradiations, respectively. The Ag modified ZnO nanoparticles exhibited enhanced catalytic activity towards organic pollutants, and showed better performance than the pure ZnO nanoparticles under UV and sunlight irradiations. This performance was probably due to the presence of silver nanoparticles as a plasmonic material. Antibacterial activity was performed against different bacteria. ZnO-Ag@CME NPs showed high antibacterial activity against K. pneumoniae, S. typhimurium, P. vulgaris, S. mitis, and S. faecalis with MIC values of 50, 12.5, 12.5, 12.5, and 12.45 µg/mL, respectively. All in all, the present investigation suggests a promising method to achieve high-efficiency antibacterial and catalytic performance.