Optical and FTIR properties of Se93−XZn2Te5InX chalcogenide glasses

In this work, we report the optical properties of bulk Se_93−XZn₂Te₅In_X (X=0, 2, 4, 6 and 10) chalcogenide glasses. Refractive index, extinction coefficient, real dielectric constant (ε′), imaginary dielectric constant (ε″), absorption coefficient (α) and energy band gap were obtained from analysis of common range (250-1100 nm) UV/Visible transmittance spectrum. Besides, transmission percentages were obtained from FTIR spectra in wave number range 4000-400 cm⁻¹.The concentration dependence structural phenomena have been explained with help of average coordination 〈z〉.     

Thermal annealing effect of on optical constants of vacuum evaporated Se75S25−xCdx chalcogenide thin films

Chalcogenide glasses are interesting materials due to their infrared transmitting properties and photo induced effects exhibited by them. Thin films with thickness of 3000 Å of the glasses Se₇₅S_25−xCd_x with x=6, 8 and 10 at% prepared by melt quench technique were evaporated by thermal evaporation onto glass substrates under a vacuum of 10⁻⁶ Torr. The optical constants (absorption coefficient, refractive index and extinction coefficient) of as-prepared and annealed films have been studied as a function of photon energy in the wave length region 400-1000 nm. Analysis of the optical absorption data shows that the rule of non-direct transitions predominates. It has been found that the absorption coefficient and optical band gap increase with increasing annealing temperatures. The refractive index (n) and the extinction coefficient (k) were observed to decrease with increasing annealing temperature.     

Refractive index, oscillator parameters and temperature-tuned energy band gap of Tl4In3GaS8-layered single crystals

Transmission and reflection measurements in the wavelength region 450-1100 nm were carried out on Tl₄In₃GaS₈-layered single crystals. The analysis of the room temperature absorption data revealed the presence of both optical indirect and direct transitions with band gap energies of 2.32 and 2.52 eV, respectively. The rate of change of the indirect band gap with temperature dE_gi/dT=-6.0×10⁻⁴ eV/K was determined from transmission measurements in the temperature range of 10-300 K. The absolute zero value of the band gap energy was obtained as E_gi(0)=2.44 eV. The dispersion of the refractive index is discussed in terms of the Wemple-DiDomenico single-effective-oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero-frequency refractive index were found to be 4.87 eV, 26.77 eV, 8.48×10¹³ m⁻² and 2.55, respectively.     

Ellipsometric characterization of PbI2 thin film on glass

The optical properties of polycrystalline lead iodide thin film grown on Corning glass substrate have been investigated by spectroscopic ellipsometry. A structural model is proposed to account for the optical constants of the film and its thickness. The optical properties of the PbI₂ layer were modeled using a modified Cauchy dispersion formula. The optical band gap E_g has been calculated based on the absorption coefficient (α) data above the band edge and from the incident photon energy at the maximum index of refraction. The band gap was also measured directly from the plot of the first derivative of the experimental transmission data with respect to the light wavelength around the transition band edge. The band gap was found to be in the range of 2.385±0.010 eV which agrees with the reported experimental values. Urbach's energy tail was observed in the absorption trend below the band edge and was found to be related to Urbach's energy of 0.08 eV.     

Optical characterization of xTiO2-(60 − x)SiO2-40Na2O glasses: II. Absorption edge, Fermi level, electronic polarizability and optical basicity

In the present work different optical properties of xTiO₂-(60 − x)SiO₂-40Na₂O (wt%) optical glasses are determined. The characterization is done over a wide energy range, 0.41-6.2 eV. The refractive index and the extinction coefficient data are used to measure the absorption coefficient of the different glass compositions. Studying the UV-absorption edge, both direct and indirect allowed transitions with their optical energy gaps are carried out. In the same time, the Urbach energy is evaluated. From the extinction coefficient data, the Fermi energy of the glasses is calculated. The molar refraction, electronic polarizability and the optical basicity are obtained using the measured glass refractive indices.     

Compositional dependence of the optical properties of amorphous semiconducting glass Ge10AsxSe(90−x) thin films

Optical properties of ternary chalcognide amorphous Ge₁₀As_xSe_(90−x) (with 10?x?25 at%) thin films prepared by thermal evaporation have been measured in visible and near-infrared spectral region. The straightforward analysis proposed by Swanepoel has been successfully employed, and it has allowed us to determine the average thickness , and the refractive index, n, of the films, with high accuracy. The refractive index, n and the average thickness has been determined from the upper and lower envelopes of the transmission spectra measured at normal incidence, in the spectral range 400-2500 nm. The absorption coefficient α, and therefore extinction coefficient k, have been determined from the transmission spectra in the strong-absorption region. The dispersion of the refractive index is discussed in terms of the single oscillator Wemple-DiDomenico model, and the optical absorption edge is described using the ‘nondirect transition’ model proposed by Tauc. Likewise, the optical energy gap is derived from Tauc's extrapolation. The relationship between the optical gap and chemical composition in Ge₁₀As_xSe_(90−x) amorphous system is discussed in terms of the average heat of atomization H_s and average coordination number N_c. Finally, the chemical bond approach has been also applied successfully to interpret the decrease of the glass optical gap with increasing As content.     

Switching phenomenon and optical properties of Se85Te10Bi5 films

Se₈₅Te₁₀Bi₅ films of different thicknesses ranging from 126 to 512 nm have been prepared. Energy-dispersive X-ray (EDX) spectroscopy technique showed that films are nearly stoichiometric. X-ray diffraction (XRD) measurements have showed that the Se₈₅Te₁₀Bi₅ films were amorphous. Electrical conduction activation energy (ΔE_σ) for the obtained films is found to be 0.662 eV independent of thickness in the investigated range. Investigation of the current voltage (I-V) characteristics in amorphous Se₈₅Te₁₀Bi₅ films reveals that it is typical for a memory switch. The switching voltage V_th increases with the increase of the thickness and decreases exponentially with temperature in the range from 298 to 383 K. The switching voltage activation energy (ε) calculated from the temperature dependence of V_th is found to be 0.325 eV. The switching phenomenon in amorphous Se₈₅Te₁₀Bi₅ films is explained according to an electrothermal model for the switching process. The optical constants, the refractive index (n) and the absorption index (k) have been determined from transmittance (T) and reflectance (R) of Se₈₅Te₁₀Bi₅ films. Allowed non-direct transitions with an optical energy gap (E_g^opt) of 1.33 eV have been obtained. ΔE_σ is almost half the obtained value of E_g^opt, which suggested band to band conduction as indicated by Davis and Mott.     

Dielectric modelling of the transmittance spectra of thin As20S80 films

As₂₀S₈₀ thin films with different thicknesses (49.4-763.1 nm) were deposited on glass substrates using a thermal evaporation technique. Spectrophotometric measurements of the films' transmittance were taken in the wavelength range of 190-2500 nm. The transmission spectra were simulated with a computer model based on dielectric modelling to determine the optical constants and thicknesses of the films. The O'Leary-Johnson-Lim (OJL) models implemented in the commercial software programme SCOUT were used. Thicknesses obtained by the simulated method were correlated to the results obtained from a surface profiler technique. Optical parameters, such as the refractive index n, the absorption coefficient k, the optical band gap E_g, the high-frequency dielectric constant ε_∞, the Urbach energy E_U, the single-oscillator energy and the dispersion energy, were determined. The results indicated that the thickness effect can be separated into two distinct groups for films of thicknesses either less than or greater than 312 nm.     

Derivation of the optical constants of spin coated CeO2-TiO2-ZrO2 thin films prepared by sol-gel route

Ternary thin films of cerium titanium zirconium mixed oxide were prepared by the sol-gel process and deposited by a spin coating technique at different spin speeds (1000-4000 rpm). Ceric ammonium nitrate, Ce(NO₃)₆(NH₄)₂, titanium butoxide, Ti[O(CH₂)₃CH₃]₄, and zirconium propoxide, Zr(OCH₂CH₂CH₃)₄, were used as starting materials. Differential calorimetric analysis (DSC) and thermogravimetric analysis (TGA) were carried out on the CeO₂-TiO₂-ZrO₂ gel to study the decomposition and phase transition of the gel. For molecular, structural, elemental, and morphological characterization of the films, Fourier Transform Infrared (FTIR) spectral analysis, X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), cross-sectional scanning electron microscopy (SEM), and atomic force microscopy (AFM) were carried out. All the ternary oxide thin films were amorphous. The optical constants (refractive index, extinction coefficient, band gap) and thickness of the films were determined in the 350-1000 nm wavelength range by using an nkd spectrophotometer. The refractive index, extinction coefficient, and thickness of the films were changed by varying the spin speed. The oscillator and dispersion energies were obtained using the Wemple-DiDomenico dispersion relationship. The optical band gap is independent of the spin speed and has a value of about E_g≈2.82±0.04 eV for indirect transition.     

Structural, electronic and optical calculations of CaxZn1−xO alloys: A first principles study

First principles density functional calculations, using full potential linearized augmented plane wave (FP-LAPW) method, have been performed in order to investigate the structural, electronic and optical properties of Ca_xZn_1−xO alloy in B1 (NaCl) phase. Dependence of structural parameters as well as the band gap values on the composition x have been analyzed in the range 0?x?1. Calculated electronic structure and the density of states of these alloys are discussed in terms of the contribution of Zn d, O p and Ca p and d states. Furthermore, optical properties such as complex dielectric constants ε(ω), refractive index including extinction coefficient k(ω), normal-incidence reflectivity R(ω), absorption coefficient α(ω) and optical conductivity σ(ω) are calculated and discussed in the incident photon energy range 0-45 eV.     

Third-order optical nonlinearities of lead-free (Na1−xKx)0.5Bi0.5TiO3 thin films

(Na_1−xK_x)_0.5Bi_0.5TiO₃ (NKBT) (x = 0.1, 0.2, and 0.3) thin films with good surface morphology and rhombohedral perovskite structure were fabricated on quartz substrates by a sol-gel process. The fundamental optical constants (the band gaps, linear refractive indices and absorption coefficients) of the films were obtained through optical transmittance measurements. The nonlinear optical properties were investigated by Z-scan technique performed at 532 nm with a picosecond laser. A two-photon absorption effect closely related with potassium-doping content was found in thin films, and the nonlinear refractive index n₂ increases evidently with potassium-doping. The real part of the third-order nonlinear susceptibility χ⁽³⁾ is much larger than its imaginary part, indicating that the third-order optical nonlinear response of the NKBT films is dominated by the optical nonlinear refractive behavior. These results show that NKBT thin films have potential applications in nonlinear optics.     

Optical constants of Cu(In0.7Ga0.3)5Se8 and Cu(In0.4Ga0.6)5Se8 crystals

Variable angle spectroscopic ellipsometry has been applied to characterize the optical constants of bulk Cu(In_0.7Ga_0.3)₅Se₈ and Cu(In_0.4Ga_0.6)₅Se₈ crystals grown by the Bridgman method. The spectra were measured at room temperature over the energy range 0.8-4.4 eV. Adachi’s model was used to calculate the dielectric functions as well as the spectral dependence of complex refractive index, absorption coefficient, and normal-incidence reflectivity. The calculated data are in good agreement with the experimental ones over the entire range of photon energies. The parameters such as strength, threshold energy, and broadening, corresponding to the E₀, E_1A, and E_1B interband transitions, have been determined using the simulated annealing algorithm.     

Optical and acoustic properties of TeO2/WO3 glasses with small amount of additive ZrO2

The optical and acoustic properties of tellurite glasses in the system TeO₂/ZrO₂/WO₃ have been investigated. The refractive index at different wavelengths and the optical spectra of the glasses have been measured. From the refractive index and absorption edge studies for prepared glasses, the optical parameter viz; optical band gap (E_opt), Urbach energy, (ΔE), dispersion energy, E_d, and the average oscillator energy, E₀, have been calculated. Sound velocities were measured by pulse echo technique. From these velocities and densities values, various elastic moduli were calculated. The variations in the refractive index, optical energy gap and elastic moduli with WO₃ content have been discussed in terms of the glass structure. Quantitatively, we used the bond compression model for analyzing the room temperature elastic moduli data. By calculating the number of bonds per unit volume, the average stretching force constant, and the average ring size we can extract valuable information about the structure of the present glasses.     

Structure and optical analysis of Ta2O5 deposited on infrasil substrate

Electron beam gun technique was used to prepare Ta₂O₅ thin films onto infrasil substrates of thicknesses 333 and 666 nm. The structure characterization was investigated using X-ray diffraction patterns. Transmittance measurements in the wavelength range (240-2000 nm) were used to calculate the refractive index n and the absorption index k depending on Swanepole's method. The dispersion curve of the refractive index shows an anomalous dispersion in the absorption region and a normal one in the transparent region. The analysis of the optical absorption data revealed that the optical band gap E_g was indirect transition. It was found that the refractive index dispersion data obeyed the single oscillator of the Wemple-DiDomenico model, from which the dispersion parameters (E_o and E_d) and the high frequency dielectric constant were determined. The electric free carrier susceptibility and the carrier concentration to the effective mass ratio were estimated according to the model of Spitzer and Fan. Graphical representation of the relaxation time as a function of photon energy was also presented.     

Optical band gap and optical constants in a-Se80Te20−xPbx thin films

The optical constants (absorption coefficient, refractive index, extention coefficient, real and imaginary part of dielectric constant) have been studied for a-Se₈₀Te_20−xPb_x (where x = 0, 2, 6, 10) thin films as a function of photon energy in the wave length range (500–1000 nm). It has been found that the optical band gap increases while the refractive index and the extinction coefficient (k) decreases on incorporation of lead in Se–Te system. The value of absorption coefficient (α) and the extinction coefficient (k) increases, while the value of refractive index (n) decreases with incident photon energy. The results are interpreted in terms of the change in concentration of localized states due to the shift in fermi level.     

Investigation of the optoelectronic properties of columbite ZnNb2O6 crystal

A high-quality ZnNb₂O₆ single-crystal grown by optical floating zone method has been used as a research prototype to analyze the optoelectronic parameters by measuring the absorption coefficient and transmittance spectra along the b-axis from 200 nm to 1000 nm at room temperature. The optical interband transitions of ZnNb₂O₆ have been determined as a direct transition with a band gap of 3.84 eV. The refractive index, extinction coefficient, and real and imaginary parts of the complex dielectric constants as functions of the wavelength for ZnNb₂O₆ crystal are obtained from the measured absorption coefficients and transmittance spectra. In the Urbach tail of 3.16–3.60 eV, the validity of the Cauchy–Sellmeier equation has also been evaluated. Using the single effective oscillator model, the oscillator energy E_o is found to be 4.77 eV. The dispersion energy E_d is 26.88 eV and ZnNb₂O₆ crystal takes an ionic value.     

Effect of Ga addition on optical properties of crystalline Ga20Se80 system

Ga_xSe_100−x (20 ≤ x ≤ 50) in polycrystalline form was prepared by direct fusion of stoichiometric proportions of pure elements. The spectral behavior of transmittance (T) and the reflectance (R) in the wavelength range 400–2500 nm for all films of different thicknesses were measured to obtain different optical parameters (refractive index, n, and absorption index, k). The study of inter-band transitions indicates that the existence of direct forbidden transitions and indirect forbidden transitions with energy gaps decrease with increasing Ga percentage.     

Synthesis and investigation of nonlinear optical properties of semiconductor ZnS nanoparticles

ZnS nanoparticles were prepared by a simple chemical method and using PVP (poly vinylpyrrolidone) as capping agent. The sample was characterized by UV-vis spectrophotometer, X-ray diffraction (XRD) and Z-scan technique. XRD pattern showed that the ZnS nanoparticles had zinc blende structure with an average size of about 2.18 nm. The value of band gap of these nanoparticles was measured to be 4.20 eV. The nonlinear optical properties of ZnS nanoparticles in aqueous solution were studied by Z-scan technique using CW He-Ne laser at 632.8 nm. The nonlinear absorption coefficient (β) was estimated to be as high as 3.2×10⁻³ cm/W and the nonlinear refractive index (n₂) was in order of 10⁻⁸ cm²/W. The sign of the nonlinear refractive index obtained negative that indicated this material exhibits self-defocusing optical nonlinearity.     

Determination of optical properties in nanostructured thin films using the Swanepoel method

We present the methodological framework of the Swanepoel method for the spectrophotometric determination of optical properties in thin films using transmittance data. As an illustrative case study, we determined the refractive index, thickness, absorption index, and extinction coefficient of a nanostructured 3 mol% Y₂O₃-doped ZrO₂ (yttria stabilized zirconia, 3YSZ) thin film prepared by the sol-gel method and deposited by dipping onto a soda-lime glass substrate. In addition, using the absorption index obtained with the Swanepoel method, we calculated the optical band gap of the film. The refractive index was found to increase, then decrease, and finally stabilize with increasing wavelength of the radiation, while the absorption index and extinction coefficient decreased monotonically to zero. These trends are explained in terms of the location of the absorption bands. We also deduced that this 3YSZ thin film has a direct optical band gap of 4.6 eV. All these results compared well with those given in the literature for similar thin films. This suggests that the Swanepoel method has an important role to play in the optical characterization of ceramic thin films.