Azulenesulfonium Salts: Accessible,Stable, and Versatile Reagents for Cross‐Coupling

Azulenesulfonium salts may be readily prepared from the corresponding azulenes by an S_EAr reaction. These azulene sulfonium salts are bench‐stable species that may be employed as pseudohalides for cross‐coupling. Specifically, their application in Suzuki–Miyaura reactions has been demonstrated with a diverse selection of coupling partners. These azulenesulfonium salts possess significant advantages in comparison with the corresponding azulenyl halides, which are known to be unstable and difficult to prepare in pure form.     

Lanthanides Mediated Oxidative Cross Coupling of Benzylalcohol and Various Amines to Form Corresponding Imines

Herein, a new and efficient approach towards the oxidative cross‐coupling of benzylalcohol and various aromatic amines to form corresponding imines with high degree conversion (>80 %) and chemo‐selectivity using lanthanide salts as pre‐catalysts is presented. The catalyzed oxidative cross‐coupling reaction using La(NO₃)₃ · 6H₂O as pre‐catalyst displayed a broad substrate scope. The reaction afforded various substituted imines from the reaction of benzylalcohol with ample variety of amines in good yields.     

A Pyridine–Pyridine Cross‐Coupling Reaction via Dearomatized Radical Intermediates

A pyridine–pyridine coupling reaction has been developed between pyridyl phosphonium salts and cyanopyridines using B₂pin₂ as an electron‐transfer reagent. Complete regio‐ and cross‐selectivity are observed when forming a range of valuable 2,4′‐bipyridines. Phosphonium salts were found to be the only viable radical precursors in this process, and mechanistic studies indicate that the process does not proceed through a Minisci‐type coupling involving a pyridyl radical. Instead, a radical–radical coupling process between a boryl phosphonium pyridyl radical and a boryl‐stabilized cyanopyridine radical explains the C?C bond‐forming step.     

The First Cyclopentadienylalkylphosphane Nickel Chelates: Synthesis,Structures, and Reactions

The first cyclopentadienylalkylphosphane nickel chelate complexes are reported. The anionic ligand obtained by reaction of spiro[2.4]hepta‐4,6‐diene with lithium di‐tert‐butylphosphide was treated with NiCl₂ to yield [η⁵:κ¹‐(di‐tert‐butylphosphanylethyl)cyclopentadienyl]chloronickel(II). From this complex, some acetonitrile‐stabilized cationic complexes were obtained by reaction with the respective silver salts in acetonitrile. Methyl‐ and alkynylnickel chelates were prepared by reaction of the chloronickel complex with methyllithium and by copper‐mediated coupling with terminal alkynes, respectively. Some of the complexes prepared were investigated by X‐ray crystallography or cyclic voltammetry. The alkynylnickel chelates undergo cycloaddition reactions with ethoxycarbonylisothiocyanate or tetracyanoethylene, and the cyclobutenes obtained undergo ring opening to the corresponding dienes. The study includes an NMR spectroscopic investigation of the two conformers of one of these dienes.     

Alkali Metal and Trimethylsilyl Carbamoselenothioates – Synthesis,Structure, and some Reactions

This paper describes the synthesis and some reactions of potassium, rubidium, cesium and trimethylsilyl carbamoselenothioates. The potassium salts were synthesized in 70–80 % yields by reacting the corresponding thiocarbamoyl chlorides with potassium selenide in acetonitrile. Furthermore, the rubidium and cesium salts were obtained in good yields by treating the trimethylsilyl esters with the corresponding metal fluorides. The crystal structure of acetonitrile‐solvated potassium N,N‐dimethylcarbamoselenothioate consisted of dimeric units, featuring μ‐carbamoselenothioate anions associated with potassium cations that are located on the upper and lower sides of a plane involving two opposing carbamoselenothioate groups. These heavier alkali metal salts readily reacted with alkyl halides to give both S‐ and Se‐alkyl esters. The reaction of the potassium salts with trimethylsilyl chlorides forms S‐ and Se‐trimethylsilyl carbamoselenothioates which are in equilibrium. The reaction of the salts and silyl esters with organo Group‐14 and ‐15 elements halides gave exclusively the corresponding Se‐substituted products in good yields.     

Synthesis and some Reactions of Alkali Metal Carbamotelluroates

Sodium and potassium carbamotelluroates [M(R₂NCOTe), M = Na, K, Rb, Cs] were synthesized in moderate to good yields by reacting carbamoyl chloride with the corresponding alkali metal tellurides. The salts readily reacted with trimethylsilyl chloride to form O‐trimethylsilyl carbamotelluroate (R₂NCTeOSiMe₃), which further reacted with RbF and CsF to lead to the corresponding heavy alkali metal carbamotelluroates. These salts reacted with alkyl iodide and carbamoyl chlorides to give the corresponding Te‐alkyl carbamotelluroates and dicarbamoyl tellurides in moderate yields.     

Acceptor‐Substituted Ferrocenium Salts as Strong,Single‐Electron Oxidants: Synthesis,Electrochemistry, Theoretical Investigations,and Initial Synthetic Application

A series of mono‐ and 1,1′‐diheteroatom‐substituted ferrocene derivatives as well as acylated ferrocenes was prepared efficiently by a unified strategy that consists of selective mono‐ and 1,1′‐dilithiation reactions and subsequent coupling with carbon, phosphorus, sulfur and halogen electrophiles. Chemical oxidation of the ferrocene derivatives by benzoquinone, 2,3‐dichloro‐5,6‐dicyanobenzoquinone, AgPF₆, or 2,2,6,6‐tetramethyl‐1‐oxopiperidinium hexafluorophosphate provided the corresponding ferrocenium salts. The redox potentials of the synthesized ferrocenes were determined by cyclic voltammetry, and it was observed that all new ferrocenium salts have stronger oxidizing properties than standard ferrocenium hexafluorophosphate. An initial application of selected derivatives in an oxidative bicyclization revealed that they mediate the transformation under considerably milder conditions than ferrocenium hexafluorophosphate. Quantum chemical calculations of the reduction potentials of the substituted ferrocenium ions were carried out by using a standard thermodynamic cycle that involved the gas‐phase energetics and solvation energies of the contributing species. A remarkable agreement between theory and experiment was found: the mean average deviation amounted to only 0.030 V and the maximum deviation to 0.1 V. This enabled the analysis of various physical contributions to the computed reduction potentials of these ferrocene derivatives, thereby providing insight into their electronic structure and physicochemical properties.     

Oxidative Coupling of Anionic Abnormal N‐Heterocyclic Carbenes: Efficient Access to Janus‐Type 4,4′‐Bis(2H‐imidazol‐2‐ylidene)s

The oxidative coupling of anionic imidazol‐4‐ylidenes protected at the C2 position with [MnCp(CO)₂] or BH₃ led to the corresponding 4,4′‐bis(2H‐imidazol‐2‐ylidene) complexes or adducts, in which the two carbene moieties are connected through a single C?C bond. Subsequent acidic treatment of the later species led to the corresponding 4,4′‐bis(imidazolium) salts in good yields. The overall procedure offers practical access to a novel class of Janus‐type bis(NHC)s. Strikingly, the coplanarity of the two NHC rings within the mesityl derivative 4,4′‐bis(IMes), favored by steric hindrance along with stabilizing intramolecular C?H???π aryl interactions, allows the alignment of the π‐systems and, as a direct consequence, significant electron communication through the bis(carbene) scaffold.     

Sandmeyer‐Type Trifluoromethylthiolation and Trifluoromethylselenolation of (Hetero)Aromatic Amines Catalyzed by Copper

Aromatic and heteroaromatic diazonium salts were efficiently converted into the corresponding trifluoromethylthio‐ or selenoethers by reaction with Me₄NSCF₃ or Me₄NSeCF₃, respectively, in the presence of catalytic amounts of copper thiocyanate. These Sandmeyer‐type reactions proceed within one hour at room temperature, are applicable to a wide range of functionalized molecules, and can optionally be combined with the diazotizations into one‐pot protocols.     

Cyclizing Radical Carboiodination,Carbotelluration, and Carboaminoxylation of Aryl Amines

Radical carboiodination of various aryl amines is reported. Aryl diazonium salts, generated in situ from the corresponding aryl amines, are reacted with Bu₄NI to provide the corresponding aryl radicals which undergo 5‐exo or 6‐exo cyclization. Iodine abstraction eventually affords the carboiodinated products in good to excellent yields. If TEMPO is added, the cascade provides the cyclized carboaminoxylation products. Running the reaction in the presence of PhTeTePh affords the phenyltellurated cyclized products.     

Facile Syntheses of N‐Heterocyclic Carbene Precursors through I2‐ or NIS‐Promoted Amidiniumation of N‐Alkenyl Formamidines

We have developed I₂‐ or N‐iodosuccinimide (NIS)‐mediated amidiniumation of N‐alkenyl formamidines for the syntheses of cyclic formamidinium salts, some of which could be directly used as N‐heterocyclic carbene (NHC) precursors. Treatment of iodine‐containing formamidinium salts with Al₂O₃ led to the formation of cyclic formamidinium salts with an unsaturated backbone. A rhodium(I) complex ligated by a representative NHC was prepared by the reaction of [Rh(cod)Cl]₂ (cod=1,5‐cyclooctadiene) with the free carbene obtained in situ from deprotonation of the corresponding formamidinium salts. The NHCs prepared in situ can also react with S₈ to afford the corresponding thiones.     

2,5‐Bis(2‐(diphenylphosphino)phenyl)‐1,3,4‐oxadiazole ligands and their Cu(I) complexes for Sonogashira coupling reaction

Two diphosphane ligands – 2,5‐bis(2‐(diphenylphosphino)‐5‐R)phenyl)‐1,3,4‐oxadiazole ( L1 , R = H, L2 , R = OMe) and their binuclear complexes, L1Cu and L2Cu , were prepared and characterized. The molecular structures of L1Cu and L2Cu , as perchlorate salts, were established by X‐ray crystallography, which showed them to be binuclear complexes with each Cu atom tetrahedrally coordinated by two P atoms and two N atoms. The ligands and their Cu(I) complexes catalyzed Sonogashira coupling reactions of iodobenzene with phenylacetylene in the presence of K₂CO₃ under Pd‐free conditions. Coupling reactions catalyzed by L1 or L2 with Cu(MeCN)₄ClO₄ in situ exhibited better yields than those by the corresponding Cu(I) complexes L1Cu or L2Cu . Detailed studies showed L1 or L2 with Cu(MeCN)₄ClO₄ to be suitable catalysts for the coupling reaction of terminal alkynes and aryl halides. The coupling reactions of aryl iodides with electron‐withdrawing groups showed better results. Copyright © 2014 John Wiley & Sons, Ltd.     

Structure and Reaction Chemistry of Magnesium Organocuprates Derived from Magnesiacyclopentadienes and Copper(I) Salts

The chemistry of magnesium organocuprates, including their synthesis, structures, and reactions, remains underexplored. In this work, by taking advantage of the high reactivity and ready availability of magnesiacyclopentadienes, a series of magnesiacyclopentadiene‐based organocuprates were synthesized and structurally characterized. A variety of CuX salts (X=Cl, Br, I, or alkynyl) were successfully applied to react with magnesiacyclopentadienes. Besides CuX salts, AgX salts (X=Cl, alkynyl) also undergwent the above reaction to afford the corresponding magnesium organoargentates. Single‐crystal X‐ray structural analysis and DFT calculations of these butadienyl magnesium organocuprates revealed unique structural characteristics and bonding modes. These results are also very useful to understand the transmetalation process, since the product can be viewed as the resting‐state intermediate of a transmetalation reaction between organomagnesium compounds and coinage‐metal salts. Preliminary information on the reaction chemistry of these magnesium organocuprates is provided by their reactions with allyl bromide, benzoyl chloride, and CO₂.     

Well‐Defined N‐Heterocyclic Carbene‐Palladium Complexes as Efficient Catalysts for Domino Sonogashira Coupling/Cyclization Reaction and C‐H bond Arylation of Benzothiazole

Well‐defined and air‐stable PEPPSI (Pyridine Enhanced Precatalyst Preparation Stabilization and Initiation) themed palladium bis‐N‐heterocyclic carbene complexes have been developed for the domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with a variety of terminal alkynes and C‐H bond arylation of benzothiazole with aryl iodides. The PEPPSI themed palladium complexes, 2a and 2b were synthesized in good yields from the reaction of corresponding imidazolium salts with PdCl₂ and K₂CO₃ in pyridine. The new air‐stable palladium‐NHC complexes were characterized by NMR spectroscopy, X‐ray crystallography, elemental analysis, and mass spectroscopy studies. The PEPPSI themed palladium(II) bis‐N‐heterocyclic carbene complexes 2a and 2b exhibited excellent catalytic activities for domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with terminal alkynes yielding benzofuran derivatives. In addition, the palladium complexes, 2a and 2b successfully catalyzed the direct C‐H bond arylation of benzothiazole with aryl iodides as coupling partners in presence of CuI as co‐catalyst.     

Synthesis of some [1,2,4]triazino[5,6‐b]quinoline derivatives

By coupling of diazonium salts with ethyl N‐(4‐oxo‐1,4‐dihydroquinolin‐2‐yl)carbamate 4 , the corresponding 3‐arylazocompounds 5 were obtained. These ones were cyclized thermally or in alkaline medium to the corresponding 2‐aryl‐2,3,5,10‐tetrahydro‐[1,2,4]triazino[5,6‐b]quinolin‐3,10‐diones 6 . Compounds 6 were transformed by alkaline hydrolytic splitting to the corresponding 2‐amino‐3‐arylazo‐1,4‐dihydroquino‐lin‐4‐ones 7. Starting carbamate 4 was prepared by a two‐step synthesis from 2‐amino‐1,4‐dihydroquinolin‐4‐one 1.     

On the Synthesis,Characterization and Reactivity of N‐Heteroaryl–Boryl Radicals,a New Radical Class Based on Five‐Membered Ring Ligands

The synthesis and physical characterization of a new class of N‐heterocycle–boryl radicals is presented, based on five membered ring ligands with a N(sp²) complexation site. These pyrazole–boranes and pyrazaboles exhibit a low bond dissociation energy (BDE; B?H) and accordingly excellent hydrogen transfer properties. Most importantly, a high modulation of the BDE(B?H) by the fine tuning of the N‐heterocyclic ligand was obtained in this series and could be correlated with the spin density on the boron atom of the corresponding radical. The reactivity of the latter for small molecule chemistry has been studied through the determination of several reaction rate constants corresponding to addition to alkenes and alkynes, addition to O₂, oxidation by iodonium salts and halogen abstraction from alkyl halides. Two selected applications of N‐heterocycle–boryl radicals are also proposed herein, for radical polymerization and for radical dehalogenation reactions.     

Aryl Diazonium Salt‐Triggered Cyclization and Cycloaddition Reactions: Past,Present, and Future

Aryl diazonium salts occupy a privileged role in synthetic chemistry owing to their ready availability and versatile reactivity. While their applications in accessing diversely functionalized arene derivatives via denitrogenation‐coupling and reduction/addition reactions have been well recognized by practitioners in both academia and industry, recent renaissance in chemical transformations of retaining the key N₂‐unit has emerged as a powerful technique to construct various N‐heterocycles. This review covers the history and latest advances in cyclization and cycloaddition reactions using aryl diazonium salts as N₂‐annulation synthons. The scope, applications, and opportunities in exploring new chemical space by this sustainable strategy are summarized and discussed.     

Synthesen und chemische Reaktionen neuer Chinonderivate mit 1,6-Methano[10]annulenpartialstruktur oder ihrer Valenztautomeren

Syntheses and Chemical Reactions of New Quinone Derivatives with 1,6-Methano[10]annulene Fragments or their Valencetautomers The coupling of 2-Methoxy-1,6-methano[10]annulene with aryldiazonium salts leads to the corresponding quinone hydrazones. These compounds undergo reduction with LiAlH₄, condensation with hydrazines and hydrazides and alkylation at the carbonyl O-atom or the hydrazone N-atom.     

In situ generated rhodium‐based catalyst for addition of phenylboronic acid to aldehydes

New 1,3‐dialkylperhydrobenzimidazolinium and 1,3‐dialkylimidazolinium salts ( 2,4 ) as NHC precursors have been synthesized and characterized. These salts in combination with [RhCl(COD)]₂ provided active catalysts for the addition of phenylboronic acid to aldehydes under mild conditions. The in situ prepared three‐component system [RhCl(COD)]₂/imidazolinium salts ( 2,4 ) and KOBu^t catalyse the addition of phenylboronic acid to sterically hindered aldehydes affording the corresponding arylated secondary alcohols in good yields. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:461–465, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20132     

Unusual Orthogonality in the Cleavage Process of Closely Related Chelating Protecting Groups for Carboxylic Acids by Using Different Metal Ions

Three structurally related relay protecting groups for carboxylic acids that are based on chelating amines have been developed. These protecting groups can easily be introduced by coupling the carboxylic acid and the corresponding amine in the presence of 2‐(1H‐benzotriazole‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate (TBTU). In addition to being stable to a whole array of reaction conditions, these protecting groups are also stable under acidic and basic conditions, allowing them to be used in combination with the ester protection of carboxylic acids. The cleavage of these protecting groups is activated by the chelation of metal ions, involving an unusual coordination of the amide nitrogen. Despite their similarity, cleavage of these protecting groups is possible in both a stepwise and an orthogonal fashion by applying different metal salts.