Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Heavy Metal Removal from Synthetic Solutions with Magnetic Beads Under Magnetic Field

The aim of this study is to prepare magnetic beads which can be used for the removal of heavy metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate‐vinyl imidazole) [m‐poly(EGDMA‐VIM)] beads were produced by suspension polymerization in the presence of magnetite Fe₃O₄ nano‐powder. The specific surface area of the m‐poly(EGDMA‐VIM) beads was found to be 63.1 m²/g with a size range of 150–200 µm in diameter and the swelling ratio was 85%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA‐VIM) beads was 12.4%. The maximum binding capacities of the m‐poly(EGDMA‐VIM) beads were 32.4 mg/g for Cu²⁺, 45.8 mg/g for Zn²⁺, 84.2 mg/g for Cd²⁺and 134.5 mg/g for Pb²⁺. The affinity order on mass basis is Pb²⁺>Cd²⁺>Zn²⁺>Cu²⁺. Equilibrium data agreed well with the Langmuir model. pH significantly affected the binding capacity of the magnetic beads. Binding of heavy metal ions from synthetic wastewater was also studied. The binding capacities were 26.2 mg/g for Cu²⁺, 33.7 mg/g for Zn²⁺, 54.7 mg/g for Cd²⁺ and 108.4 mg/g for Pb²⁺. The magnetic beads could be regenerated up to about 97% by treating with 0.1 M HNO₃. These features make m‐poly(EGDMA‐VIM) beads a potential candidate for support of heavy metal removal under magnetic field.     

The kinetics and mechanisms of gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

2‐Phenylethanol, racemic 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol have been pyrolyzed in a static system over the temperature range 449.3–490.6°C and pressure range 65–198 torr. The decomposition reactions of these alcohols in seasoned vessels are homogeneous, unimolecular, and follow a first‐order rate law. The Arrhenius equations for the overall decomposition and partial rates of products formation were found as follows: for 2‐phenylethanol, overall rate log k₁(s⁻¹)=12.43−228.1 kJ mol⁻¹ (2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.97−249.2 kJ mol⁻¹ (2.303 RT)⁻¹, styrene formation log k₁(s⁻¹)=12.40−229.2 kJ mol⁻¹(2.303 RT)⁻¹, ethylbenzene formation log k₁(s⁻¹)=12.96−253.2 kJ mol⁻¹(2.303 RT)⁻¹; for 1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=13.03−233.5 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=13.04−240.1 kJ mol⁻¹(2.303 RT)⁻¹, unsaturated hydrocarbons+indene formation log k₁(s⁻¹)=12.19−224.3 kJ mol⁻¹(2.303 RT)⁻¹; for 2‐methyl‐1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=12.68−222.1 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.65−222.9 kJ mol⁻¹(2.303 RT)⁻¹, phenylpropenes formation log k₁(s⁻¹)=12.27−226.2 kJ mol⁻¹(2.303 RT)⁻¹. The overall decomposition rates of the 2‐hydroxyalkylbenzenes show a small but significant increase from primary to tertiary alcohol reactant. Two competitive eliminations are shown by each of the substrates: the dehydration process tends to decrease in relative importance from the primary to the tertiary alcohol substrate, while toluene formation increases. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 401–407, 1999     

Kinetics and Mechanism Study of the Substitution Reactions of the Chloride Ligand in Dichloro(5,10,15,20)‐tetraphenyl‐21H,23H‐porphinato)tin(IV) by Organic Bases in Dimethylformamide Solvent

Substitution reactions of a Cl⁻ ligand in [SnCl₂(tpp)] (tpp=5,10,15,20‐tetraphenyl‐21H,23H‐porphinato(2−)) by five organic bases i.e., butylamine (BuNH₂), sec‐butylamine (^sBuNH₂), tert‐butylamine (^tBuNH₂), dibutylamine (Bu₂NH), and tributylamine (Bu₃N), as entering nucleophile in dimethylformamide at I=0.1M (NaNO₃) and 30–55° were studied. The second‐order rate constants for the substitution of a Cl⁻ ligand were found to be (36.86±1.14)⋅10⁻³, (32.91±0.79)⋅10⁻³, (22.21±0.58)⋅10⁻³, (19.09±0.66)⋅10⁻³, and (1.36±0.08)⋅10⁻³ M ⁻¹s⁻¹ at 40° for BuNH₂, ^tBuNH₂, ^sBuNH₂, Bu₂NH, and Bu₃N, respectively. In a temperature‐dependence study, the activation parameters ΔH^≠ and ΔS^≠ for the reaction of [SnCl₂(tpp)] with the organic bases were determined as 38.61±4.79 kJ mol⁻¹ and −150.40±15.46 J K⁻¹mol⁻¹ for BuNH₂, 40.95±4.79 kJ mol⁻¹ and −143.75±15.46 J K⁻¹mol⁻¹ for ^tBuNH₂, 30.88±2.43 kJ mol⁻¹ and −179.00±7.82 J K⁻¹mol⁻¹ for ^sBuNH₂, 26.56±2.97 kJ mol⁻¹ and −194.05±9.39 J K⁻¹mol⁻¹ for Bu₂NH, and 39.37±2.25 kJ mol⁻¹ and −174.68±7.07 J K⁻¹ mol⁻¹ for Bu₃N. From the linear rate dependence on the concentration of the bases, the span of k₂ values, and the large negative values of the activation entropy, an associative (A) mechanism is deduced for the ligand substitution.     

Bonding Energetics of Palladium Amido/Aryloxide Complexes in DMSO: Implications for Palladium-Mediated Aniline Activation

Thermodynamic knowledge of the metal–ligand (M−L) σ-bond strength is crucial to understanding metal-mediated transformations. Here, we developed a method for determining the Pd−X (X=OR and NHAr) bond heterolysis energies (ΔG_het(Pd−X)) in DMSO taking [(tmeda)PdArX] (tmeda=N,N,N′,N′-tetramethylethylenediamine) as the model complexes. The ΔG_het(Pd−X) scales span a range of 2.6–9.0 kcal mol⁻¹ for ΔG_het(Pd−O) values and of 14.5–19.5 kcal mol⁻¹ for ΔG_het(Pd−N) values, respectively, implying a facile heterolytic detachment of the Pd ligands. Structure-reactivity analyses of a modeling Pd-mediated X−H bond activation reveal that the M−X bond metathesis is dominated by differences of the X−H and Pd−X bond strengths, the former being more influential. The ΔG_het(Pd−X) and pK_a(X−H) parameters enable regulation of reaction thermodynamics and chemoselectivity and diagnosing the probability of aniline activation with Pd−X complexes.     

Chemistry of NOx and HNO3 Molecules with Gas-Phase Hydrated O.− and OH− Ions

The gas-phase reactions of O ^{. −}(H₂O)_n and OH⁻(H₂O)_n, n=20–38, with nitrogen-containing atmospherically relevant molecules, namely NO_x and HNO₃, are studied by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry and theoretically with the use of DFT calculations. Hydrated O ^{. −} anions oxidize NO ^. and NO₂ ^. to NO₂⁻ and NO₃⁻ through a strongly exothermic reaction with enthalpy of −263±47 kJ mol⁻¹ and −286±42 kJ mol⁻¹, indicating a covalent bond formation. Comparison of the rate coefficients with collision models shows that the reactions are kinetically slow with 3.3 and 6.5 % collision efficiency. Reactions between hydrated OH⁻ anions and nitric oxides were not observed in the present experiment and are most likely thermodynamically hindered. In contrast, both hydrated anions are reactive toward HNO₃ through proton transfer from nitric acid, yielding hydrated NO₃⁻. Although HNO₃ is efficiently picked-up by the water clusters, forming (HNO₃)_0–2(H₂O)_mNO₃⁻ clusters, the overall kinetics of nitrate formation are slow and correspond to an efficiency below 10 %. Combination of the measured reaction thermochemistry with literature values in thermochemical cycles yields ΔH_f(O⁻(aq.))=48±42 kJ mol⁻¹ and ΔH_f(NO₂⁻(aq.))=−125±63 kJ mol⁻¹.     

Nucleophilic and electrophilic promotion of ligand substitution reactions in oxo‐bridged,dinuclear chromium(III) complexes

Base hydrolysis reactions of [Cr(tmpa)(NCSe)]₂O²⁺, [Cr(tmpa)(N₃)]₂O²⁺, [Cr₂(tmpa)₂(μ−O)(μ−PhPO₄)]⁴⁺ and [Cr₂(tmpa)₂(μ−O)(μ−CO₃)]²⁺ follow the pseudo‐first‐order relationship (excess OH⁻): k_obsd=k_o+k_bQ_p[OH⁻]/(1+Q_p[OH⁻]). For the CO₃²⁻ complex, k_b(60°C)=(1.50±0.03)×10⁻² s⁻¹; ΔH‡=61±2 kJ/mol, ΔS‡=−99±7 J/mol K; Q_p(60°C)=(3.8±0.3)×10¹ M⁻¹; ΔH°=67±2 kJ/mol, ΔS°=230±7 J/mol K (I=1.0 M). An isokinetic relationship among k_OH(=k_bQ_p) activation parameters for five (tmpa)CrOCr(tmpa) complexes shows that all follow essentially the same pathway. Activated complex formation is thought to require nucleophilic attack of coordinated OH⁻ at the chromium‐leaving group bond in the k_b step, accompanied by reattachment of a tmpa pyridyl arm displaced by OH⁻ in the Q_p preequilibrium. Abstraction of both thiocyanate ligands was observed upon mixing [Cr(tmpa)(NCS)]₂O²⁺ with [Pd(CH₃CN)₄]²⁺ in CH₃CN solution. The proposed mechanism requires rapid complexation of both reactant thiocyanate ligands by Pd(II) (K_p(25°C)=(4.5±0.2)×10⁸ M⁻²; ΔH°=−32±6 kJ/mol, ΔS°=59±19 J/mol K) prior to rate‐limiting Cr NCS bond‐breaking (k₂(25°C)=(1.17±0.02)×10⁻³ s⁻¹; ΔH‡=98±2 kJ/mol, ΔS‡=27±5 J/mol K). Pd(II)‐assisted NCS⁻ abstraction is not driven by weakening of the Cr( )NCS⁻ bond through ligation of the sulfur atom to palladium, but rather by a favorable ΔS‡ resulting from the release of Pd(NCS)⁺ fragments and weak solvation of the activated complex in CH₃CN solution. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 351–356, 1999     

Preparation and characterization of novel organic chelating resin and its application in recovery of Zn(II) from aqueous solutions

An organic polymeric resin was synthesized by anchoring p ‐aminobenzoic acid onto macroporous chloromethylated polystyrene beads, and was used for Zn(II) removal from aqueous solutions. The resin exhibited an initially rapid adsorption property for Zn(II) with equilibrium time of 10 h and the maximum adsorption capability approached 184.5 mg g⁻¹. Optimum pH was 4.5. The mechanism of adsorption was investigated using kinetic, isotherm and thermodynamic models. The adsorption kinetic data were described well by a pseudo second‐order model with R ² of 0.997. There was a negative ΔG (−17.98 kJ mol⁻¹) and positive ΔH (13.58 kJ mol⁻¹). HCl solution (1.0 mol l⁻¹) could achieve an elution rate of 100%. The experimental data were well fitted by the Thomas model with R ² of 0.9826. Copyright © 2016 John Wiley & Sons, Ltd.     

The synthesis,crystal structure and thermal properties of an energetic compound: the hydrated azanium salt of 3,6‐bis[(1H‐1,2,3,4‐tetrazol‐5‐yl)amino]‐1,2,4,5‐tetrazine

The energetic ionic salt bis(1‐aminoguanidin‐2‐ium) 5,5′‐[1,2,4,5‐tetrazine‐3,6‐diylbis(azanediyl)]bis(1H‐1,2,3,4‐tetrazol‐1‐ide) dihydrate, 2CH₇N₄⁺·C₄H₂N₁₄²⁻·2H₂O, (I), with a high nitrogen content, has been synthesized and examined by elemental analysis, Fourier transform IR spectrometry, ¹H NMR spectroscopy and single‐crystal X‐ray crystallography. Compound (I) crystallizes in the monoclinic space group P 2₁/c with two water molecules. However, the water molecules are disordered about an inversion centre and were modelled as half‐occupancy molecules in the structure. The crystal structure reveals a three‐dimensional network of molecules linked through N—H…N, N—H…O, O—H…N and O—H…O hydrogen bonds. Thermal decomposition was investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The exothermic peak temperature is 509.72 K, which indicates that hydrated salt (I) exhibits good thermal stability. Non‐isothermal reaction kinetic parameters were calculated via both the Kissinger and the Ozawa methods to yield activation energies of E _k = 239.07 kJ mol⁻¹, lgA _k = 22.79 s⁻¹ and E _O = 235.38 kJ mol⁻¹ for (I). Additionally, the thermal safety was evaluated by calculating critical temperatures and thermodynamic values, viz. T _SADT, T _TIT, T _b, ΔS ^≠, ΔH ^≠ and ΔG ^≠. The results reveal that (I) exhibits good thermal safety compared to other ion salts of 3,6‐bis[(1H‐1,2,3,4‐tetrazol‐5‐yl)amino]‐1,2,4,5‐tetrazine (BTATz).     

Removal of cibacron blue 3G-A (CB) dye from aqueous solution using chemo-physically activated biochar from oil palm empty fruit bunch fiber

A novel biodegradable adsorbent called pyrolysed empty fruit bunch fibres (PEF) was prepared by chemo-physical activation of empty fruit bunch fibres (EFB) biochar for removal of cibacron blue 3G-A (CB) dye from aqueous solution. PEF was characterized using FTIR, SEM-EDX, XRD and BET techniques. The N₂ adsorption-desorption isotherms indicated PEF’s surface area to be 362.84 m²g⁻¹ and XRD attributed amorphous nature to PEF. After adsorption process, PEF has smoother surface morphology, increase in carbon by weight and shift in functional groups. The established adsorption optimum conditions were pH 10, 45 min contact time and 0.10 g/100 mL adsorbent dosage with 99.05% CB dye removal capacity at 343 K and initial dye concentration 100 mg/L. Desorption ratio >90% after seventh cycle of adsorption-desorption experiments confirmed high reusability (regeneration) of PEF. Pseudo second order kinetic and Freundlich were better fitted with kinetic and isotherm model respectively, while mechanism of adsorption was controlled by film diffusion (external mass transfer). Thermodynamic studied revealed ΔG, ΔS and ΔH to be −3.12 MJ/mol K, 9.11 kJ/mol K, 6.83 kJ/mol respectively at 343 K. The negative value of ΔG, positive values of ΔS and ΔH indicated spontaneity, feasibility and endothermic nature of CB dye adsorption from aqueous solution onto PEF.     

Thermolysis of 3‐alkyl‐3‐methyl‐1,2‐dioxetanes: activation parameters and chemiexcitation yields

3‐Methyl‐3‐(3‐pentyl)‐1,2‐dioxetane 1 and 3‐methyl‐3‐(2,2‐dimethyl‐1‐propyl)‐1,2‐dioxetane 2 were synthesized in low yield by the α‐bromohydroperoxide method. The activation parameters were determined by the chemiluminescence method (for 1 ΔH‡ = 25.0 ± 0.3 kcal/mol, ΔS‡ = −1.0 entropy unit (e.u.), ΔG‡ = 25.3 kcal/mol, k₁ (60°C) = 4.6 × 10⁻⁴s⁻¹; for 2 ΔH‡ = 24.2 ± 0.2 kcal/mol, ΔS‡ = −2.0 e.u., ΔG‡ = 24.9 kcal/mol, k₁ (60°C) = 9.2 × 10⁻⁴s⁻¹. Thermolysis of 1–2 produced excited carbonyl fragments (direct production of high yields of triplets relative to excited singlets) (chemiexcitation yields for 1: ϕ^T = 0.02, ϕ^S ≤ 0.0005; for 2: ϕ^T = 0.02, ϕ^S ≤ 0.0004). The results are discussed in relation to a diradical‐like mechanism. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:176–179, 2001     

Complexation of Anions Including Nucleotide Anions by Open‐Chain Host Compounds with Amide,Urea, and Aryl Functions

A systematical evaluation of association constants between halide, phosphate, and carboxylate anions with N‐methylformamide ( 1 ) and the related bidentate receptors 2 – 6 (derived from, e.g., phthalic acid or ethylenediamine) in CDCl₃ as solvent yielded increments of complexation free‐energy ΔΔG for each single H‐bond, which varied like, e.g., 5.1 kJ/mol (for Cl⁻), 4.0 kJ/mol (for Br⁻), 4.0 kJ/mol (for I⁻) (with values taken from Tables 1 and 2), in line with expected H‐bond strength. The observed complexation induced NH‐NMR shift (CIS) values also showed a regular change, in the case of 1 , e.g., from 5.0 to 2.8 to 2.1 ppm (Table 1), with about half of these values with the bidentate ligands (Tables 2 and 3). Tridentate hosts led to a substantial binding increase, if strain‐free convergence of all NH donor functions towards the anion was possible. The tris[urea] ligand 10 yielded, even in the polar solvent DMSO, with Cl⁻ a ΔG of −21.5 kJ/mol and with Br⁻ of −10⋅5 kJ/mol, whereas with I⁻, no association was detectable. The results demonstrated that small, inexpensive, and conformationally mobile host compounds can exhibit high affinities as well as descrimination with anions, as much as more preorganized receptors do which require multistep synthesis. The corresponding adamantyl derivative 13 allowed measurements also in CDCl₃, with K=4.3⋅10⁴ M ⁻¹ for chloride (Table 7). Complexes with nucleotide anions were again particularly strong with the tridentate urea‐based ligands, the latter being optimal ligands for chloride complexation. For the association of 10 with AMP²⁻ and GMP²⁻in (D₆)DMSO, the association constants were 3⋅10⁴ M ⁻¹ (Table 8) and almost the same as with Cl⁻. In the case of the urea derivatives 17 , 18 , and 21 , containing only one phenyl or pyrenyl substituent, however, the ΔG values decreased in the order A>C>T>G (e.g. −13.6, −11.6, −7.6, −10.5 kJ/mol in the case of 17 , resp.; Table 8). In H₂O, the pyrenyl‐substituted urea derivatives allow measurements with fluorescence, and, unexpectedly, show only smaller nucleobase discrimination, with constants around 3⋅10³ M ⁻¹.     

Thermolysis of hexasubstituted‐4,5‐dihydro‐3H‐pyrazoles: Kinetics and activation parameters

A kinetics study of the thermolysis of a series of hexasubstituted‐4,5‐dihydro‐3H‐pyrazoles (pyrazolines 1a: 3,3,4,4‐tetramethyl‐5‐phenyl‐5‐acetoxy; 1b: cis‐3,5‐diphenyl‐3,3,4‐trimethyl‐5‐acetoxy; 1c: cis‐3,5‐diphenyl‐3,4,4‐trimethyl‐5‐methoxy; 1d: 3,3,5‐triphenyl‐4,4‐dimethyl‐5‐acetoxy), which produced the corresponding hexasubstituted cyclopropanes 2a–d in quantitative yields was carried out. The first order rate constants (k₁) for thermal decomposition and activation parameters were determined. The relative reactivity series was found to be 1d >> 1b ∼ 1c > 1a. The activation parameters for thermolysis were found to be: for 1a ΔH‡ = 39.8 kcal/mol, ΔS‡ = 14 eu, k_150° = 6.8 × 10⁻⁵ s⁻¹; for 1b ΔH‡ = 33.5 kcal/mol, ΔS ‡ = 0.2 eu, k_150° = 1.7 × 10⁻⁴s⁻¹; for 1c ΔH‡ = 32.7 kcal/mol, ΔS‡ = −1.8 eu, k_150° = 1.2 × 10⁻⁴s⁻¹; for 1d ΔH‡ = 30.1 kcal/mol, ΔS‡ = −1.6 eu, k_150° = 8.8 × 10⁻³s⁻¹. The effect of variation of C3 substituents on the activation parameters for thermolysis paralleled the trend reported for acyclic analogs. The results are consistent with the formation of a (singlet) 1,3‐diradical intermediate with subsequent closure to yield the cyclopropanes. The mechanism of diradical formation appears to involve N₂‐C₃ bond cleavage as the rate determining step rather than simultaneous two bond scission. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:299–302, 2000     

Kinetics of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione with β‐pinene and 2‐carene: Temperature,high pressure,and solvent effects

The data on temperature, solvent, and high hydrostatic pressure influence on the rate of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 1 ) with 2‐carene ( 2 ), and β‐pinene ( 4 ) have been obtained. Ene reactions 1 + 2 and 1 + 4 have high heat effects: ∆H_r‐n ( 1 + 2 ) −158.4, ∆H_r‐n( 1 + 4 ) −159.2 kJ mol⁻¹, 25°C, 1,2‐dichloroethane. The comparison of the activation volume (∆V^≠( 1 + 2 ) −29.9 cm³ mol⁻¹, toluene; ∆V^≠( 1 + 4 ) −36.0 cm³ mol⁻¹, ethyl acetate) and reaction volume values (∆V_r‐n( 1 + 2 ) −24.0 cm³ mol⁻¹, toluene; ∆V_r‐n( 1 + 4 ) −30.4 cm³ mol⁻¹, ethyl acetate) reveals more compact cyclic transition states in comparison with the acyclic reaction products 3 and 5 . In the series of nine solvents, the reaction rate of 1+2 increases 260‐fold and 1+4 increases 200‐fold, respectively, but not due to the solvent polarity.     

Kinetics and mechanism of the reaction of sulphur(IV) with N,N′‐ethylene‐bis(sali‐cylidiniminato)manganese‐(III) in aqueous solution

The reaction of (diaqua)(N,N′‐ethylene‐bis(salicylidiniminato)manganese(III) with aqueous sulphite buffer results in the formation of the corresponding mono sulphito complex, [Mn(Salen)(SO₃)]⁻ (S‐bonded isomer) via three distinct paths: (i) Mn(Salen)(OH₂)₂⁺ + HSO₃⁻ → (k₁); (ii) Mn(Salen)(OH₂)₂⁺ + SO₃²⁻ → (k₂); (III) Mn(Salen)(OH₂)(OH) + SO₃²⁻ → (k₃) in the stopped flow time scale. The fact that the mono sulphito complex does not undergo further anation with SO₃²⁻/HSO₃⁻ may be attributed to the strong trans‐activating influence of the S‐bonded sulphite. The values of the rate constants (10⁻²k_i/dm² mol⁻¹ s⁻¹ at 25°C, I = 0.3 mol dm⁻³), ΔH_i^#/kJ mol⁻¹ and ΔS_i^#/J K⁻¹ mol⁻¹ respectively are: 2.97 ± 0.27, 42.4 ± 0.2, −55.3 ± 0.6 (i = 1); 11.0 ± 0.8, 33 ± 3, −75 ± 10 (i = 2); 20.6 ± 1.9, 32.4 ± 0.2, −72.9 ± 0.6 (i = 3). The trend in reactivity (k₂ > k₁), a small labilizing effect of the coordinated hydroxo group (k₃/k₂ < 2), and substantially low values of ΔS^# suggest that the mechanism of aqua ligand substitution of the diaqua, and aqua‐hydroxo complexes is most likely associative interchange (I_a). No evidence for the formation of the O‐bonded sulphito complex and the ligand isomerization in the sulphito complex, (Mn^III‐OSO₂ → Mn^III‐SO₃), ensures the selectivity of the Mn^III centre toward the S‐end of the S^IV species. The monosulphito complex further undergoes slow redox reaction in the presence of excess sulphite to produce Mn^II, S₂O₆²⁻ and SO₄²⁻. The formation of dithionate is a consequence of the fast dimerization of the SO₃₋. generated in the rate determining step and also SO₄²⁻ formation is attributed to the fast scavenging of the SO₃₋. by the Mn^III species via a redox path. The internal reduction of the Mn^III centre in the monosulphito complex is insignificant. The redox reaction of the monosulphitomanganese(III) complex operates via two major paths, one involving HSO₃₋ and the other SO₃²⁻. The electron transfer is believed to be outersphere type. The substantially negative values of activation entropies (ΔS^# = −(1.3 ± 0.2) × 10² and −(1.6 ± 0.2) × 10² J K⁻¹ mol⁻¹ for the paths involving HSO₃₋ and SO₃²⁻ respectively) reflect a considerable degree of ordering of the reactants in the act of electron transfer. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 627–635, 1999     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Thermally induced polymerization of isobutylene in the presence of SnCl4: Kinetic study of the polymerization and NMR structural investigation of low molecular weight products

The polymerization reactivity of isobutylene/SnCl₄ mixtures in the absence of polar solvent, was investigated in a temperature interval from −78 to 60 °C. The mixture is nonreactive below −20 °C but slow polymerization proceeds from −20 to 20 °C with the initial rate r₀ of the order 10⁻⁵ mol · l⁻¹ · s⁻¹. The rate of the process increases with increasing temperature up to ∼10⁻² mol · l⁻¹ · s⁻¹ at 60 °C. Logarithmic plots of r₀ and M̄_n versus 1/T exhibit a break in the range from 20 to 35 °C. Activation energy is positive with values E = 21.7 ± 4.2 kJ/mol in the temperature interval from −20 to 35 °C and E = 159.5 ± 4.2 kJ/mol in the interval from 35 to 60 °C. The values of activation enthalpy difference of molecular weights in these temperature intervals are ΔH_Mn = −12.7 ± 4.2 kJ/mol and −38.3 ± 4.2 kJ/mol, respectively. The polymerization proceeds quantitatively, the molecular weights of products are relatively high, M̄_n = 1500–2500 at 35 °C and about 600 at 60 °C. It is assumed that initiation proceeds via [isobutylene · SnCl₄] charge transfer complex which is thermally excited and gives isobutylene radical‐cations. Oxygen inhibits the polymerization from −20 to 20 °C. Possible role of traces of water at temperatures above 20 °C is discussed. It was verified by NMR analysis that only low molecular weight polyisobutylenes are formed with high contents of exo‐ terminal unsaturated structures. In addition to standard unsaturated groups, new structures were detected in the products. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1568–1579, 2000     

Halogenation and amination dual properties of haloamines in Raschig environment: A chlorine transfer reaction between chloramine and 3-azabicyclo[3,3,0]octane

The chlorine transfer reaction between 3-azabicyclo[3,3,0]octane “AZA” and chloramine was studied over pH 8–13 in order to follow both the amination and halogenation properties of NH₂Cl. The results show the existence of two competitive reactions which lead to the simultaneous formation of N-amino- and N-chloro- 3-azabicyclo[3,3,0]octane by bimolecular kinetics. The halogenation reaction is reversible and the chlorine derivative obtained, which is thermolabile and unstable in the pure state, was identified by electrospray mass spectrometry. These phenomena were quantified by a reaction between neutral species according to an apparent S_N2-type mechanism for the amination process and a ionic mechanism involving a reaction between chloramine and protonated amine for the halogenation process. Amination occurs only in strongly basic solutions (pH ≥ 13) while chlorination occurs at lower pH's (pH ≤ 8). At intermediate pH's, a mixture of these two compounds is obtained. The relative proportions of the products are a function of intrinsic rate constants, pH and pK_a of the reactants. The rate constants and thermodynamic activation parameters are the following: k₁ = 45.5 × 10⁻³ M⁻¹ s⁻¹; ΔH₁^0# = 59.8 kJ mol⁻¹; ΔS₁^0# = − 86.5 J mol⁻¹ K⁻¹ for amination; k₂ = 114 × 10⁻³ M⁻¹ s⁻¹; ΔH₂^0# = 63.9 kJ mol⁻¹; and ΔS₂^0# = − 48.3 J mol⁻¹ K⁻¹ for chlorination. The ability of an interaction corresponding to a specific (NH₃Cl⁺/RR′NH) or general (NH₂Cl/RR′NH) acid catalysis has been also discussed. © 1997 John Wiley & Sons, Inc.     

Kinetic study of the ligand substitution on the trimethylplatinum(iv) complexes with unidentate ligands

Ligand substitution kinetics for the reaction [Pt^IVMe₃(X)(NN)]+NaY=[Pt^IVMe₃(Y)(NN)]+NaX, where NN=bipy or phen, X=MeO⁻, CH₃COO⁻, or HCOO⁻, and Y=SCN⁻ or N₃⁻, has been studied in methanol at various temperatures. The kinetic parameters for the reaction are as follows. The reaction of [PtMe₃(OMe)(phen)] with NaSCN: k₁=36.1±10.0 s⁻¹; ΔH₁^≠=65.9±14.2 kJ mol⁻¹; ΔS₁^≠=6±47 J mol⁻¹ K⁻¹; k₋₂=0.0355±0.0034 s⁻¹; ΔH₋₂^≠=63.8±1.1 kJ mol⁻¹; ΔS₋₂^≠=−58.8±3.6 J mol⁻¹ K⁻¹; and k₋₁/k₂=148±19. The reaction of [PtMe₃(OAc)(bipy)] with NaN₃: k₁=26.2±0.1 s⁻¹; ΔH₁^≠=60.5±6.6 kJ mol⁻¹; ΔS₁^≠=−14±22 J mol⁻¹K⁻¹; k₋₂=0.134±0.081 s⁻¹; ΔH₋₂^≠=74.1±24.3 kJ mol⁻¹; ΔS₋₂^≠=−10±82 J mol⁻¹K⁻¹; and k₋₁/k₂=0.479±0.012. The reaction of [PtMe₃(OAc)(bipy)] with NaSCN: k₁=26.4±0.3 s⁻¹; ΔH₁^≠=59.6±6.7 kJ mol⁻¹; ΔS₁^≠=−17±23 J mol⁻¹K⁻¹; k₋₂=0.174±0.200 s⁻¹; ΔH₋₂^≠=62.7±10.3 kJ mol⁻¹; ΔS₋₂^≠=−48±35 J mol⁻¹K⁻¹; and k₋₁/k₂=1.01±0.08. The reaction of [PtMe₃(OOCH)(bipy)] with NaN₃: k₁=36.8±0.3 s⁻¹; ΔH₁^≠=66.4±4.7 kJ mol⁻¹; ΔS₁^≠=7±16 J mol⁻¹K⁻¹; k₋₂=0.164±0.076 s⁻¹; ΔH₋₂^≠=47.0±18.1 kJ mol⁻¹; ΔS₋₂^≠=−101±61 J mol⁻¹ K⁻¹; and k₋₁/k₂=5.90±0.18. The reaction of [PtMe₃(OOCH)(bipy)] with NaSCN: k₁ =33.5±0.2 s⁻¹; ΔH₁^≠=58.0±0.4 kJ mol⁻¹; ΔS₁^≠=−20.5±1.6 J mol⁻¹ K⁻¹; k₋₂=0.222±0.083 s⁻¹; ΔH₋₂^≠=54.9±6.3 kJ mol⁻¹; ΔS₋₂^≠=−73.0±21.3 J mol⁻¹ K⁻¹; and k₋₁/k₂=12.0±0.3. Conditional pseudo-first-order rate constant k₀ increased linearly with the concentration of NaY, while it decreased drastically with the concentration of NaX. Some plausible mechanisms were examined, and the following mechanism was proposed. [Note to reader: Please see article pdf to view this scheme.] © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 523–532, 1998