Roles of C-H...O=S and pi-stacking interactions in the 2-bromoacrolein complex with N-tosyl-(S)-tryptophan-derived oxazaborolidinone catalyst

[structures: see text] Ab initio and density functional calculations were employed to examine the structures and binding energies of various complexes between 2-bromolacrolein and N-tosyl-(S)-tryptophan-derived B-butyl-1,3,2-oxazaborolidin-5-one (NTOB), a catalyst commonly used for Diels-Alder reactions. Our calculations show that the chiral oxazaborolidinone catalyst serves as a tridentate complexation agent via B...O donor-acceptor, C-H...O hydrogen-bonded, and pi-stacking interactions. The most stable complex (1TS) is predicted to have a binding energy of -93 kJ mol(-1) (deltaG(298) = -29 kJ mol(-1)). The formyl C-H...O hydrogen bond and pi-stacking interaction are the key factors governing the relative stabilities of the four acrolein-NTOB complexes examined. The calculated structure and binding properties of 1TS are consistent with the experimental results on the absorption spectrum of the acrolein-NTOB complex and the effects of substituents on the reactivity of Diels-Alder reactions. 1TS differs from Corey's proposed model of transition-state assembly in two aspects: (1) it involves the s-trans-acrolein and (2) it favors a C-H...O interaction via the sulfonyl oxygen (C-H...O=S), rather than the ring oxygen (C-H...O-B). This calculated structure of the acrolein-catalyst complex provides an alternate explanation of the origin of stereoselectivity in the NTOB-catalyzed Diels-Alder reactions.     

Efficient and Saturated Red Light-Emitting Electrochemical Cells Based on Cationic Iridium(III) Complexes with EQE up to 9.4 %

Solid-state light-emitting electrochemical cells (LECs) have several advantages, such as low-voltage operation, compatibility with inert metal electrodes, large-area flexible substrates, and simple solution-processable device architectures. However, most of the studies on saturated red LECs show low or moderate device efficiencies (external quantum efficiency (EQE) <3.3 %). In this work, we demonstrate a series of five red-emitting cationic iridium complexes ( RED1- - RED5 ) with 2,2′-biquinoline ligands and test their electroluminescence (EL) characteristics in LECs. The Commission Internationale de l′Eclairage (CIE) 1931 coordinates for the LECs based on these complexes are all beyond the National Television System Committee (NTSC) red standard point (0.67, 0.33). The maximal EQE of the neat-film RED1 -based LECs reaches 7.4 %. The reddest complex, RED3 , is doped in the blue-emitting host complex, BG , to fabricate host–guest LECs. The maximal EQE of the host–guest LECs (1 wt % complex RED3 ) reaches 9.4 %, which is among the highest reported for the saturated red LECs.     

The efficiency of light-emitting electrochemical cells

We report on the efficiency behavior of light-emitting electrochemical cells (LECs) fabricated from a methyl-substituted ladder-type poly(p-phenylene) (mLPPP) that was blended with a crown ether based solid state electrolyte. Unlike organic light-emitting diodes (oLEDs) utilizing mLPPP as an active layer, the LECs suffer from a loss of efficiency at elevated current densities. From scan rate dependent studies we deduce that this efficiency drop is not only due to device decomposition upon high voltage operation and we also reveal the intrinsic mode of LEC operation. The decreasing width of the intrinsic region between the p- and n-type doped zones upon ongoing pin-junction formation causes distinct (either field or electrode induced) luminance quenching effects.     

Formation of ternary complexes between a macrotricyclic host and hetero-guest pairs: an acid-base controlled selective complexation process

A triptycene-based cylindrical macrotricyclic host can include diquat and electron-rich aromatics simultaneously to form stable ternary complexes, which is stabilized not only by a charge-transfer (CT) interaction between electron-rich and electron-deficient guests but also by the face to face pi-stacking interactions between the host and the guests. Moreover, a selective complexation process between a ternary complex containing benzidine and a binary complex can be effectively controlled by the use of acid and base.     

A fluorescent chemosensor for Zn(II). Exciplex formation in solution and the solid state

The macrocyclic phenanthrolinophane 2,9-[2,5,8-triaza-5-(N-anthracene-9-methylamino)ethyl]-[9]-1,10-phenanthrolinophane (L) bearing a pendant arm containing a coordinating amine and an anthracene group forms stable complexes with Zn(II), Cd(II) and Hg(II) in solution. Stability constants of these complexes were determined in 0.10 mol dm(-3) NMe(4)Cl H(2)O-MeCN (1:1, v/v) solution at 298.1 +/- 0.1 K by means of potentiometric (pH metric) titration. The fluorescence emission properties of these complexes were studied in this solvent. For the Zn(II) complex, steady-state and time-resolved fluorescence studies were performed in ethanol solution and in the solid state. In solution, intramolecular pi-stacking interaction between phenanthroline and anthracene in the ground state and exciplex emission in the excited state were observed. From the temperature dependence of the photostationary ratio (I(Exc)/I(M)), the activation energy for the exciplex formation (E(a)) and the binding energy of the exciplex (-DeltaH) were determined. The crystal structure of the [ZnLBr](ClO(4)).H(2)O compound was resolved, showing that in the solid state both intra- and inter-molecular pi-stacking interactions are present. Such interactions were also evidenced by UV-vis absorption and emission spectra in the solid state. The absorption spectrum of a thin film of the solid complex is red-shifted compared with the solution spectra, whereas its emission spectrum reveals the unique featureless exciplex band, blue shifted compared with the solution. In conjunction with X-ray data the solid-state data was interpreted as being due to a new exciplex where no pi-stacking (full overlap of the pi-electron cloud of the two chromophores - anthracene and phenanthroline) is observed. L is a fluorescent chemosensor able to signal Zn(II) in presence of Cd(II) and Hg(II), since the last two metal ions do not give rise either to the formation of pi-stacking complexes or to exciplex emission in solution.     

Synthesis and light-emitting properties of bipolar oligofluorenes containing triarylamine and 1,2,4-triazole moieties

A facile approach for synthesis of bipolar oligofluorenes, TAZ-OF(n)-NPh, n = 2 or 3 end-capped with hole-transporting diphenylamino and electron-transporting triazole moieties by Suzuki cross-coupling as the key reaction has been developed. This novel bipolar oligofluorenes exhibited blue-emission, high thermal and morphological stabilities. The single-layer OLED based on TAZ-OF(2)-NPh exhibited superior device performance with a maximum luminance of 1128 cd m(-2) and luminance efficiency of up to 0.83 cd A(-1).     

Dynamic doping and degradation in sandwich-type light-emitting electrochemical cells

Photoluminescence spectroscopy has been performed in situ during device operation and after switch-off on ionic transition metal complex (iTMC)-based sandwich-type light-emitting electrochemical cells (LECs). It is demonstrated that the photoluminescence of the LECs decreases with increasing operating time. For operating times up to three hours the decline in photoluminescence is fully recoverable after switching off the bias. These results imply that doping of the iTMC layer is responsible, not only, for the turn-on of LECs but also for their lifetimes.     

Light-emitting electrochemical cells based on a supramolecularly-caged phenanthroline-based iridium complex

The complex [Ir(ppy)(2)(pphen)][PF(6)] (Hppy = 2-phenylpyridine, pphen = 2-phenyl-1,10-phenanthroline) has been prepared and evaluated as an electroluminescent component for light-emitting electrochemical cells (LECs). Like in analogous LECs using bpy-based iridium(III) complexes a significant enhancement of the device stability is observed.     

Tailoring carrier injection efficiency to improve the carrier balance of solid-state light-emitting electrochemical cells

We study the influence of the carrier injection efficiency on the performance of light-emitting electrochemical cells (LECs) based on a hole-preferred transporting cationic transition metal complex (CTMC) [Ir(dfppz)(2)(dtb-bpy)](+)(PF(6)(-)) (complex 1) and an electron-preferred transporting CTMC [Ir(ppy)(2)(dasb)](+)(PF(6)(-)) (complex 2) (where dfppz is 1-(2,4-difluorophenyl) pyrazole, dtb-bpy is 4,4'-di(tert-butyl)-2,2'-bipyridine, ppy is 2-phenylpyridine and dasb is 4,5-diaza-9,9'-spirobifluorene). Experimental results show that even with electrochemically doped layers, the ohmic contacts for carrier injection could be formed only when the carrier injection barriers were relatively low. Thus, adding carrier injection layers in LECs with relatively high carrier injection barriers would affect carrier balance and thus would result in altered device efficiency. Comparison of the device characteristics of LECs based on complex 1 and 2 in various device structures suggests that the carrier injection efficiency of CTMC-based LECs should be modified according to the carrier transporting characteristics of CTMCs to optimize device efficiency. Hole-preferred transporting CTMCs should be combined with an LEC structure with a relatively high electron injection efficiency, while a relatively high hole injection efficiency would be required for LECs based on electron-preferred transporting CTMCs. Since the tailored carrier injection efficiency compensates for the unbalanced carrier transporting properties of the emissive layer, the carrier recombination zone would be located near the center of the emissive layer and exciton quenching near the electrodes would be significantly mitigated, rendering an improved device efficiency approaching the upper limit expected from the photoluminescence quantum yield of the emissive layer and the optical outcoupling efficiency from a typical layered light-emitting device structure.     

Phosphorescent sensitized fluorescent solid-state near-infrared light-emitting electrochemical cells

We report phosphorescent sensitized fluorescent near-infrared (NIR) light-emitting electrochemical cells (LECs) utilizing a phosphorescent cationic transition metal complex [Ir(ppy)(2)(dasb)](+)(PF(6)(-)) (where ppy is 2-phenylpyridine and dasb is 4,5-diaza-9,9'-spirobifluorene) as the host and two fluorescent ionic NIR emitting dyes 3,3'-diethyl-2,2'-oxathiacarbocyanine iodide (DOTCI) and 3,3'-diethylthiatricarbocyanine iodide (DTTCI) as the guests. Photoluminescence measurements show that the host-guest films containing low guest concentrations effectively quench host emission due to efficient host-guest energy transfer. Electroluminescence (EL) measurements reveal that the EL spectra of the NIR LECs doped with DOTCI and DTTCI center at ca. 730 and 810 nm, respectively. Moreover, the DOTCI and DTTCI doped NIR LECs achieve peak EQE (power efficiency) up to 0.80% (5.65 mW W(-1)) and 1.24% (7.84 mW W(-1)), respectively. The device efficiencies achieved are among the highest reported for NIR LECs and thus confirm that phosphorescent sensitized fluorescence is useful for achieving efficient NIR LECs.     

聚合物发光电化学池的研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(Ⅱ)

简要介绍本研究组 1997年以来在聚合物发光电化学池 (LEC)研究中取得的一些成果,包括发光聚合物的电化学性质及其HOMO和LUMO能级的电化学测量,LECp i n结的交流阻抗分析,双功能嵌段共聚物LEC,以及咪唑盐离子液体掺杂的室温准冷冻p i n结LEC等.     

Molecules that assemble by sound: an application to the instant gelation of stable organic fluids

The first molecule that assembles by ultrasound is described. An association-inert dinuclear Pd complex, anti-1a, which is stabilized by intramolecular pi-stacking interactions, gelatinizes a variety of organic solvents instantly upon brief presonication for a few seconds. This is the first quick, positive, and reversible method for the remote switching of stable sol-gel phases. Uniquely, the rate can be precisely controlled over the range between "no gelation" and "instant gelation" simply by tuning the sonication time.     

Electroluminescent Properties of LECs Based on Ionic Transition Metal Complexes Using Tetrazole-Based Ancillary Ligand

Light-emitting electrochemical cells (LECs) are a promising type of electroluminescent device for display and lighting applications. In this study, LECs based on ionic iridium complexes utilizing a tetrazole based ancillary ligand were fabricated and their electrical properties were investigated. Two new iridium(III) complexes with tetrazole based ancillary ligands, namely, [Ir(ppy)₂(tetrazole)]PF₆ (complex 1) and [Ir(dfppy)₂(tetrazole)]PF₆ (complex 2) (where ppy is 2-phenylpyridine, dfppy is 2-(2,4-difluorophenyl)pyridine, tetrazole is 5-bromo-2-(2-methyl-2H-tetrazol-5-yl)-pyridine and PF₆ is hexafluorophosphate), have been synthesized and characterized. These synthesized complexes were used for the fabrication of LEC devices. LECs based on complex 1 result in orange light emission (576 nm) with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.45, 0.49), while complex 2 emits green (518 nm) electroluminescence with the CIE coordinates of (0.33, 0.49). Our work suggests that the light emission of cationic iridium complexes can easily be tuned by the substituents on the cyclometalated ligands.     

Cationic IrIII Emitters with Near-Infrared Emission Beyond 800 nm and Their Use in Light-Emitting Electrochemical Cells

Solid-state near-infrared (NIR) light-emitting devices have recently received considerable attention as NIR light sources that can penetrate deep into human tissue and are suitable for bioimaging and labeling. In addition, solid-state NIR light-emitting electrochemical cells (LECs) have shown several promising advantages over NIR organic light-emitting devices (OLEDs). However, among the reported NIR LECs based on ionic transition-metal complexes (iTMCs), there is currently no iridium-based LEC that displays NIR electroluminescence (EL) peaks near to or above 800 nm. In this report we demonstrate a simple method for adjusting the energy gap between the highest-occupied molecular orbital (HOMO) and the lowest-unoccupied molecular orbital (LUMO) of iridium-based iTMCs to generate NIR emission. We describe a series of novel ionic iridium complexes with very small energy gaps, namely NIR1 – NIR6 , in which 2,3-diphenylbenzo[g]quinoxaline moieties mainly take charge of the HOMO energy levels and 2,2′-biquinoline, 2-(quinolin-2-yl)quinazoline, and 2,2′-bibenzo[d]thiazole moieties mainly control the LUMO energy levels. All the complexes exhibited NIR phosphorescence, with emission maxima up to 850 nm, and have been applied as components in LECs, showing a maximum external quantum efficiency (EQE) of 0.05 % in the EL devices. By using a host–guest emissive system, with the iridium complex RED as the host and the complex NIR3 or NIR6 as guest, the highest EQE of the LECs can be further enhanced to above 0.1 %.     

Perovskite Light-Emitting Electrochemical Cells Employing Electron Injection/Transport Layers of Ionic Transition Metal Complexes

Recently, perovskites have attracted intense attention due to their high potential in optoelectronic applications. Employing perovskites as the emissive materials of light-emitting electrochemical cells (LECs) shows the advantages of simple fabrication process, low-voltage operation, and compatibility with inert electrodes, along with saturated electroluminescence (EL) emission. Unlike in previously reported perovskite LECs, in which salts are incorporated in the emissive layer, the ion-transport layer was separated from the emissive layer in this work. The layer of ionic transition metal complex (iTMC) not only provides mobile ions but also serves as an electron-injection/transport layer. Orthogonal solvents are used in spin coating to prevent the intermixing of stacked perovskite and iTMC layers. The blue iTMC with high ionization potential is effective in blocking holes from the emissive layer and thus ensures EL color saturation. In addition, the carrier balance of the perovskite/iTMC LECs can be optimized by adjusting the iTMC layer thickness. The optimized external quantum efficiency of the CsPbBr₃/iTMC LEC reaches 6.8 %, which is among the highest reported values for perovskite LECs. This work successfully demonstrates that, compared with mixing all components in a single emissive layer, separating the layer of ion transport, electron injection and transport from the perovskite emissive layer is more effective in adjusting device carrier balance. As such, solution-processable perovskite/iTMC LECs open up a new way to realize efficient perovskite LECs.     

1,5-Bis(benzothiazolyl)-3-thiapentane and its asymmetric dinuclear Ag(I) complex with three distinct intermolecular-stacking interactions

Synthesis of a dibenzothiazole thioether ligand that coordinates Ag(I) yielding an asymmetric dinuclear complex with three unique intermolecular pi-stacking interactions, which influence the first coordination spheres of the silver centers, is reported.     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

Improving the balance of carrier mobilities of host-guest solid-state light-emitting electrochemical cells

We report efficient host-guest solid-state light-emitting electrochemical cells (LECs) utilizing a cationic terfluorene derivative as the host and a red-emitting cationic transition metal complex as the guest. Carrier trapping induced by the energy offset in the lowest unoccupied molecular orbital (LUMO) levels between the host and the guest impedes electron transport in the host-guest films and thus improves the balance of carrier mobilities of the host films intrinsically exhibiting electron preferred transporting characteristics. Photoluminescence measurements show efficient energy transfer in this host-guest system and thus ensure predominant guest emission at low guest concentrations, rendering significantly reduced self-quenching of guest molecules. EL measurements show that the peak EQE (power efficiency) of the host-guest LECs reaches 3.62% (7.36 lm W(-1)), which approaches the upper limit that one would expect from the photoluminescence quantum yield of the emissive layer (～0.2) and an optical out-coupling efficiency of ～20% and consequently indicates superior balance of carrier mobilities in such a host-guest emissive layer. These results are among the highest reported for red-emitting LECs and thus confirm that in addition to reducing self-quenching of guest molecules, the strategy of utilizing a carrier transporting host doped with a proper carrier trapping guest would improve balance of carrier mobilities in the host-guest emissive layer, offering an effective approach for optimizing device efficiencies of LECs.     

Dibenzoeilatin: a novel ligand exhibiting remarkable complementary pi-pi stacking interactions

The complex [Ru(bpy)2(dbneil)][PF6]2 forms discrete dimers in solution held by strong pi-pi stacking interactions via its distorted dibenzoeilatin ligand, indicating that planarity is not an obligatory requirement for achieving strong pi-stacking, as long as complementarity between the stacking moieties can be achieved.     

Decreased Turn‐On Times of Single‐Component Light‐Emitting Electrochemical Cells by Tethering an Ionic Iridium Complex with Imidazolium Moieties

We report a significant decrease in turn‐on times of light‐emitting electrochemical cells (LECs) by tethering imidazolium moieties onto a cationic Ir complex. The introduction of two imidazolium groups at the ends of the two alkyl side chains of [Ir(ppy)₂(dC6‐daf)]⁺(PF₆)^? (ppy=2‐phenylpyridine, dC6‐daf=9,9′‐dihexyl‐4,5‐diazafluorene) gave the complex [Ir(ppy)₂(dC6MIM‐daf)]³⁺[(PF₆)^?]₃ (dC6MIM‐daf=9,9‐bis[6‐(3‐methylimidazolium)hexyl]‐1‐yl‐4,5‐diazafluorene). Both complexes exhibited similar photoluminescent/electrochemical properties and comparable electroluminescent efficiencies. The turn‐on times of the LECs based on the latter complex, however, were much lower than those of devices based on the former. The improvement is ascribed to increased concentrations of mobile counterions ((PF₆)^?) in the neat films and a consequent increase in neat‐film ionic conductivity. These results demonstrate that the technique is useful for molecular modifications of ionic transition‐metal complexes (ITMCs) to improve the turn‐on times of LECs and to realize single‐component ITMC LECs compatible with simple driving schemes.