Synthesis and metal ion uptake studies of chelating resins derived from formaldehyde-furfuraldehyde condensed phenolic Schiff bases of 4,4'-diaminodiphenylether and o-hydroxyacetophenone

Two new chelating resins (o-HAP-DDE-HCHO and o-HAP-DDE-FFD), having multiple functional groups are synthesised by condensing the Schiff base of o-hydroxyacetophenone-4,4′-diaminodiphenylether (o-HAP-DDE) with formaldehyde and furfuraldehyde, respectively. The extent of loading of metal ions Cu(II) and Ni(II) was studied in both competitive and non-competitive conditions varying the time of contact, metal ion concentration and the pH of the reaction medium. Both the resins are able to preferentially remove Cu(II) from the mixture of Cu(II) and Ni(II) at a pH 5.89 in the batch operation, maximum % uptake being 76.8 and 84.1, respectively, for o-HAP-DDE-HCHO and o-HAP-DDE-FFD. The furfuraldehyde condensed resin was found to be more effective in removing Cu(II) ions than the formaldehyde condensed resins in batch technique. The resins exhibited little affinity for alkali and alkaline earth metal ions. Further, the furfuraldehyde condensed resin was utilised in column operation for removing Cu(II) ions. Elution study with HCl (>1.0 mol l⁻¹) resulted in removal of nearly 40–50% of loaded Cu(II) from the resin column.     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

EFFECT OF THE DEGREE OF DVB CROSSLINKING ON THE METAL ION SPECIFICITY OF POLYACRYLAMIDE-SUPPORTED GLYCINES

Metal ion specificity studies of divinylbenzene (DVB)-crosslinked polyacrylamide-supported glycines in different structural environments were investigated. The effect of the degree of crosslinking on the specific rebinding of the desorbed metal ion was investigated towards Co(II), Ni(II), Cu(II), and Zn(II) ions. The metal ion-desorbed resins showed specificity for the desorbed metal ion and the specificity characteristics increases with an increasing degree of the crosslinking agent. The polymeric ligands and metal complexes were characterized by IR, UV-visible and EPR spectra, and by SEM analysis. The swelling and solvation characteristics of the crosslinked polymers, polymeric ligands and metal complexes, the effect of the pH dependence on metal ion binding and rebinding and the kinetics of metal ion binding and rebinding were also followed. The complexation resulted in the downfield shift of the carboxylate peak in the IR spectra. The EPR parameters are in agreement with a distorted tetragonal geometry. The Cu(II) ion-desorbed resins selectively rebinds Cu(II) ions from a mixture of Cu(II) and Co(II) and Cu(II) and Ni(II) ions. The resin could be regenerated several times without loss of capacity and effective for the specific and selective rebinding of Cu(II) ions.     

Enhanced Removal of Cu(II) and Pb(II) from Aqueous Solutions by Pretreated Biomass of Fusarium Solani

This study investigated the feasibility of Fusarium solani biomass as a biosorbent for Cu(II) and Pb(II) removal from aqueous solutions. Batch sorption experiments were carried out for Cu(II) and Pb(II) to quantify the sorption kinetics, pH, biosorbent dose and pretreatment of F. solani biomass. Biomass metal uptake clearly competed with protons present in the aqueous medium, making pH an important variable in the process. The maximum biosorption by F. solani biomass was obtained with solutions having pH 5 for both metal ions. An enhanced Cu(II) removal (96.53%) was observed for aluminum hydroxide pretreated biomass. Maximum Pb(II) removal (95.48%) was observed with native biomass. Time dependence experiments for the metal ions uptake showed that adsorption equilibrium reached almost 240 min after metal addition. The kinetic studies showed that the biosorption process followed the pseudo second‐order rate model for Cu(II) and Pb(II). The equilibrium data fitted well to the Langmiur isotherm model.     

Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues

The leached residue, generated after selective extraction of Cu, Ni, and Co in sulfur dioxide-ammonia leaching of manganese nodules, was characterized and batch isothermal adsorption experiments were conducted at ambient temperature to evaluate the effectiveness of the water-washed leached residue for removal of different bivalent metal ions from aqueous synthetic solutions. The effects of pH, initial metal ion concentrations, amount of adsorbent, interfering ions, and heat treatment were also investigated. The uptake of metal ions increased with increasing pH. Under identical conditions the adsorption capacity increased in the order Cd(2+)相似文献   

Synthesis and application of modified poly (styrene‐alt‐maleic anhydride) networks as a nano chelating resin for uptake of heavy metal ions

A chelating resin based on modified poly (styrene‐alt‐maleic anhydride) with 3‐aminobenzoic acid was synthesized. This modified resin was further reacted by 1,2‐diaminoethane or 1,3‐diaminopropane in the presence of ultrasonic irradiation to prepare tridimensional chelating resin for the removal of heavy metal ions from aqueous solutions. The adsorption behavior of Fe(II), Cu(II), Zn(II) and Pb(II) ions was investigated by synthesized chelating resins in various pH. Among the synthesized resins, CSMA‐AB1 and CSMA‐AB2 demonstrated a high affinity for the selected metal ions compared to SMA‐AB, and the order of removal percentage changes as follow: Fe(II) > Cu(II) > Zn(II) > Pb(II). The adsorption of all metal ions in acidic medium was moderate, and it was favored at the pH value of 6 and 7. Also, the prepared resins were examined for removal of metal ions from industrial wastewater and were shown to have a very efficient adsorption in the case of Cu(II), Fe(II) and Pb(II); however, the adsorption of Zn(II) was lower than others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis and thermogravimetric analysis/derivative thermogravimetry. Copyright © 2012 John Wiley & Sons, Ltd.     

Visual detection of copper(II) ions in blood samples by controlling the leaching of protein-capped gold nanoparticles

We have developed a simple, low-cost, paper-based probe for the selective colorimetric detection of copper ions (Cu(2+)) in aqueous solutions. The bovine serum albumin (BSA)-modified 13.3-nm Au nanoparticle (BSA-Au NP) probe was designed to detect Cu(2+) ions using lead ions (Pb(2+)) and 2-mercaptoethanol (2-ME) as leaching agents in a glycine-NaOH (pH 12.0) solution. In addition, a nitrocellulose membrane (NCM) was used to trap the BSA-Au NPs, leading to the preparation of a nanocomposite film consisting of a BSA-Au NP-decorated membrane (BSA-Au NPs/NCM). The BSA-Au NPs probe operates on the principle that Cu deposition on the surface of the BSA-Au NPs inhibits their leaching ability, which is accelerated by Pb(2+) ions in the presence of 2-ME. Under optimal solution conditions (5 mM glycine-NaOH (pH 12.0), Pb(2+) (50 μM), and 2-ME (1.0 M)), the Pb(2+)/2-ME-BSA-Au NPs/NCM enabled the detection of Cu(2+) at nanomolar concentrations in aqueous solutions by the naked eye with high selectivity (at least 100-fold over other metal ions). In addition, this cost-effective probe allowed for the rapid and simple determination of Cu(2+) ions in not only natural water samples but also in a complex biological sample (in this case, blood sample).     

Some synthesized polymeric composite resins for the removal of Co(II) and Eu(III) from aqueous solutions

Summary The ion-exchange and sorption characteristics of new polymeric composite resins, prepared by gamma radiation were experimentally studied. The composite resins show high uptake for Co(II) and Eu(III) ions in aqueous solutions in a wide range of pH. The selectivity of the resins for Co(II) or Eu(III) species in presence of some competing ions and complexing agents (as Na⁺, Fe³⁺, EDTANa₂, etc.) was compared. Various factors that could affect the sorption behavior of metal ions (Co(II) and Eu(III)) on the prepared polymeric composite resins were studied such as ionic strength, contact time, volume mass ratio.     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

Adsorptive accumulation of Cd(II), Co(II), Cu(II), Pb(II), and Ni(II) from water on montmorillonite: influence of acid activation

The present work investigates the influence of acid activation of montmorillonite on adsorption of Cd(II), Co(II), Cu(II), Ni(II), and Pb(II) from aqueous medium and comparison of the adsorption capacities with those on parent montmorillonite. The clay-metal interactions were studied under different conditions of pH, concentration of metal ions, amount of clay, interaction time, and temperature. The interactions were dependent on pH and the uptake was controlled by the amount of clay and the initial concentration of the metal ions. The adsorption capacity of acid-activated montmorillonite increases for all the metal ions. The interactions were adsorptive in nature and relatively fast and the rate processes more akin to the second-order kinetics. The adsorption data fitted both Langmuir and Freundlich isotherms, indicating that strong forces were responsible for the interactions at energetically nonuniform sites. The Langmuir monolayer capacity of the acid-activated montmorillonite is more than that of the parent montmorillonite (Cd(II): 32.7 and 33.2 mg/g; Co(II): 28.6 and 29.7 mg/g; Cu(II): 31.8 and 32.3 mg/g; Pb(II): 33.0 and 34.0 mg/g; and Ni(II): 28.4 and 29.5 mg/g for montmorillonite and acid-activated montmorillonite, respectively). The thermodynamics of the rate processes showed the adsorption of Co(II), Pb(II), and Ni(II) to be exothermic, accompanied by decreases in entropy and Gibbs free energy, while the adsorption of Cd(II) and Cu(II) was endothermic, with an increase in entropy and an appreciable decrease in Gibbs free energy. The results have established the potential use for montmorillonite and its acid-activated form as adsorbents for Cd(II), Co(II), Cu(II), Ni(II), and Pb(II) ions from aqueous media.     

A comparative study on textural characterization: cation-exchange and sorption properties of crystalline alpha-zirconium(IV), tin(IV), and titanium(IV) phosphates

Tetravalent metal phosphates (M=Zr, Ti, and Sn) were prepared and characterized by XRD, surface properties, and TG-DTA. The cation exchange and sorption behavior of these metal phosphates toward transition metal ions such as Cu(2+), Co(2+), and Ni(2+) have been studied comparatively as a function of temperature and concentration. The adsorption process was found to increases with increase in temperature and concentration. The selectivity order for alpha-titanium and alpha-tin phosphates is Cu(2+)>Co(2+)>Ni(2+), whereas for alpha-zirconium phosphate it is Cu(2+)>Ni(2+)>Co(2+). The ion exchange capacity of alpha-titanium phosphate is greater than those of other phosphates, which is explained on the basis of the surface behavior, disorderness of the system, degree of hydrolysis of incoming guest adsorbate metal ions, and structural steric hindrance of the exchangers during adsorption and sorption. The distribution coefficient, Gibbs free energy, enthalpy, and entropy values indicate that the ion-exchange processes are spontaneous.     

Acceleration Effect of Fe(II), Co(II), Ni(II) and Cu(II) on the Hydrolysis Rate of Ortho- or Para-Hydroxy Schiff Bases

The kinetics of hydrolysis of ortho- or para-hydroxybenzylidene-4-benzidine Schiff bases have been examined in the pH range 1.70–11.90, in aqueous media containing 20wt% dioxane, at 20 °C. In basic media, pH > 8.47, a slight increase in the hydrolysis reaction rate of the Schiff bases is observed. In such basic media, the rate-controlling step is the attack of hydroxide ion on the ionized Schiff base. Below pH 6.82, the rate-determining step is ascribed to be the attack of water molecules on the protonated substrate. The effects of Fe(II), Co(II), Ni(II) and Cu(II) ions on the hydrolysis reaction rate of the Schiff bases have been studied and discussed on the basis of formation of a monocyclic chelate rings. The various thermodynamic parameters have also been evaluated and discussed.     

Novel PVC-based copper(II) membrane sensor based on 2-(1'-(4'-(1'-hydroxy-2'-naphthyl)methyleneamino)butyl iminomethyl)-1-naphthol.

A copper(II) ion-selective PVC membrane sensor based on 2-(1'-(4'-(1'-hydroxy-2'-naphthyl)methyleneamino)butyl iminomethyl)-1-naphthol (BHNB) as a novel Schiff base containing a sensing material has been successfully developed. The sensor exhibits a good linear response of 29 mV per decade within the concentration range of 10(-1)-10(-6) M of Cu2+. The sensor shows good selectivity for copper(II) ion in comparison with alkali, alkaline earth, transition and heavy metal ions. The BHNB-based sensor is suitable for use with aqueous solutions of pH 3.5-7.0 and displays minimal interference by Sr(II), Cd(II), Hg(II), Zn(II) and Pb(II), which are known to interfere with other previously suggested electrodes. The proposed membrane electrode was used as a sensor for determining the Cu(II) content in black tea samples. It was also applied as an indicator electrode in the potentiometric titration of Cu2+ ions with EDTA.     

Synthesis and characterization of PVP/AAc copolymer hydrogel and its applications in the removal of heavy metals from aqueous solution

Chelating poly(vinylpyrrolidone/acrylic acid) (PVP/AAc) copolymer hydrogels were prepared by radiation-induced copolymerization. The effects of preparation parameters such as PVP content in the hydrogel and irradiation dose on the swelling behavior of the hydrogel were studied. The pH dependent swelling was investigated. The thermal stability of the prepared hydrogel and the metal chelated ones was characterized by TGA. The removal of Fe(III), Cu(II), and Mn(II) from aqueous solution by the prepared PVP/AAc chelating hydrogel was examined by batch equilibration technique. The influence of treatment time, pH, and the initial feed concentration on the amount of the metal ions removed was studied. The results show that the removal of the metal ion followed the following order: Fe(III) > Cu(II) > Mn(II). The amounts of the removed metal ions increased with treatment time and pH of the medium. To re-use the hydrogel, the metal ions were stripped by using 2 N HCl.     

A photometric study of the complexation reaction between Alizarin complexan and zinc(II), nickel(II), lead(II), cobalt(II) and copper(II)

The complexation reaction between Alizarin complexan ([3-N,N-di(carboxymethyl)aminomethyl]-1,2-dihydroxyanthraquinone; H(4)L) and zinc(II), nickel(II), lead(II), cobalt(II) and copper(II) has been studied by a spectrophotometric method. All these metal ions form 1:1 complexes with HL; 2:1 metal:ligand complex were found only for Pb(II) and Cu(II). The stability constants are (ionic strength I = 0.1, 20 degrees C): Zn(2+) + HL(3-) right harpoon over left harpoon ZnHL(-) log K +/- 3sigma(log K) = 12.19 +/- 0.09 (I = 0.5) Ni(2+) + HL(3-) right harpoon over left harpoon NiHL(-) log K +/- 3sigma(log K) = 12.23 +/- 0.21 Pb(2+) + HL(3-) right harpoon over left harpoon PbHL(-) log K +/- 3sigma(log K) = 11.69 +/- 0.06 PbHL(-) + Pb(2+) right harpoon over left harpoon Pb(2)L + H(+) log K approximately -0.8 Co(2+) + HL(3-) right harpoon over left harpoon CoHL(-) log K 3sigma(log K) = 12.25 + 0.13 Cu(2+) + HL(3-) right harpoon over left harpoon CuHL(-) log K 3sigma(log K) = 14.75 +/- 0.07 Cu(2+) + CuHL(-) right harpoon over left harpoon Cu(2)L + H(+) log K approximately 3.5 The solubility and stability of both the reagent and the complexes and the closenes of the values of the stability constants make this reagent suitable for the photometric detection of several metal ions in the eluate from an ion-exchange column.     

Single sensor for two metal ions: colorimetric recognition of Cu2+ and fluorescent recognition of Hg2+

The first novel rhodamine B based sensor, rhodamine B hydrazide methyl 5-formyl-1H-pyrrole-2-carboxylate Schiff base (2) capable of detecting both Cu(2+) and Hg(2+) using two different detection modes has been designed and synthesized. The metal ion induced optical changes of 2 were investigated in MeOH:H(2)O (3:1) HEPES buffered solution at pH 7.4. Sensor 2 exhibits selective colorimetric recognition of Cu(2+) and fluorogenic recognition of Hg(2+) with UV-vis and fluorescence spectroscopy, respectively. Moreover, both of the Cu(2+) and Hg(2+) recognition processes are proven to be hardly influenced by other coexisting metal ions.     

Modeling of Copper(II), Cadmium(II), and Lead(II) Adsorption on Red Mud from Metal-EDTA Mixture Solutions

The adsorption of toxic heavy metal cations, i.e., Cu(II), Cd(II), and Pb(II), from metal-EDTA mixture solutions on a composite adsorbent having a heterogeneous surface, i.e., bauxite waste red mud, has been investigated and modeled with the aid of a modified surface complexation approach in respect to pH and complexant dependency of heavy metal adsorption. EDTA was selected as the modeling ligand in view of its wide usage as an anthropogenic chelating agent and abundance in natural waters. The adsorption experiments were conducted for metal salts (nitrates), metal-EDTA complexes alone, or in mixtures containing (metal+metal-EDTA). The adsorption equilibrium constants for the metal ions and metal-EDTA complexes were calculated. For all studied cases, the solid adsorbent phase concentrations of the adsorbed metal and metal-EDTA complexes were found by using the derived model equations with excellent compatibility of experimental and theoretically generated adsorption isotherms. The model was useful for metal and metal-EDTA mixture solutions either at their natural pH of equilibration with the sorbent, or after pH elevation with NaOH titration up to a certain pH. Thus adsorption of every single species (M(2+) or MY(2-)) or of possible mixtures (M(2+)+MY(2-)) at natural pH or after NaOH titration could be calculated by the use of simple quadratic model equations, once the initial concentrations of the corresponding species, i.e., [M(2+)](0) or [MY(2-)](0), were known. The compatibility of theoretical and experimental data pairs of adsorbed species concentrations was verified by means of nonlinear regression analysis. The findings of this study can be further developed so as to serve environmental risk assessment concerning the expansion of a heavy metal contaminant plume with groundwater move ment in soil consisting of hydrated-oxide type minerals. Copyright 2000 Academic Press.     

The synthesis of (N2O2S2)-Schiff base ligands and investigation of their ion extraction capability from aqueous media

Two new Schiff bases (I) and (II) containing nitrogen-sulfur-oxygen donor atoms were designed and synthesized in a multi-step reaction sequence. The Schiff base (I) was used in solvent extraction of metal chlorides such as Cu2+ and Cr3+ as well as metal picrates such as Hg2+ and UO2(2+) from aqueous phase to the organic phase. The influences of the parameter functions, such as pH, solvent, ionic strength of aqueous phase, aqueous to organic phase and concentration of the extractant were investigated to shed light on their chemical extracting properties upon the extractability of metal ions. The effect of chloroform, dichloromethane and nitrobenzene as organic solvents over the metal chlorides extraction was investigated at 25±0.1 °C by using flame atomic absorption and the result is that the ability of extraction in solvents as follows: C6H5NO2>CHCl3>CH2Cl2 and the compositions of the extracted species have been determined. The metal picrate extraction was investigated at 25±0.1 °C by using UV-visible spectrometry. As well that the extraction of picrates metal such as UO2(2+) and Hg2+ with Schiff base(I) in absence and presence of 2-(2-aminoethyl) pyridine was investigated in chloroform. The extraction results revealed the presence of neutral donors 2-(2-aminoethyl) pyridine shifts the extraction percentage curves towards higher pH region, indicating a synergistic effect of this donors on extraction of UO2(2+) and Hg2+ by the studied Schiff base (I).     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

Biosorption of nickel(II) and copper(II) ions from aqueous solution by Streptomyces coelicolor A3(2)

The biosorption of nickel(II) and copper(II) ions from aqueous solution by dried Streptomyces coelicolor A3(2) was studied as a function of concentration, pH and temperature. The optimum pH range for nickel and copper uptake was 8.0 and 5.0, respectively. At the optimal conditions, metal ion uptake was increased as the initial metal ion concentration increased up to 250 mg l(-1). At 250 mg l(-1) copper(II) ion uptake was 21.8% whereas nickel(II) ion uptake was found to be as high as 7.3% compared to those reported earlier in the literature. Metal ion uptake experiments were carried out at different temperatures where the best ion uptake was found to be at 25 degrees C. The characteristics of the adsorption process were investigated using Scatchard analysis at 25 degrees C. Scatchard analysis of the equilibrium binding data for metal ions on S. coelicolor A3(2) gave rise to a linear plot, indicating that the Langmuir model could be applied. However, for nickel(II) ion, divergence from the Scatchard plot was evident, consistent with the participation of secondary equilibrium effects in the adsorption process. Adsorption behaviour of nickel(II) and copper(II) ions on the S. coelicolor A3(2) can be expressed by both the Langmuir and Freundlich isotherms. The adsorption data with respect to both metals provide an excellent fit to the Freundlich isotherm. However, when the Langmuir isotherm model was applied to these data, a good fit was obtained for the copper adsorption only and not for nickel(II) ion.