The synthesis, layer‐by‐layer deposition, and electro‐copolymerization of precursor polyelectrolyte multilayer ultrathin films with thiophene and carbazole electroactive groups are described. The interest is in observing an electrochemical cross‐linking approach towards a highly ordered ultrathin film that contains two types of monomers to result in possible layer‐limited homo‐ and copolymerization. A uniform linear growth with alternate deposition of the polyelectrolytes is observed. The multilayer films were then electrochemically polymerized anodically by cyclic voltammetry (CV), which results in copolymerization between two different electroactive groups. Cross‐linking of the layers was verified by CV and spectroelectrochemistry data with very good linear electro‐copolymerizability.
Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.
CdSe nanoparticles stabilized with the amphiphilic diblock copolymer polystyrene‐block‐poly(4‐vinylpyridine) were spread from toluene dispersion on the water surface. Monolayers could be transferred onto solid substrates using the Langmuir‐Blodgett technique. By means of atomic force and scanning electron microscopy highly symmetric ring and disk‐like structures with diameters ranging between 150 nm and 1200 nm were observed.
AFM image of a mixed monolayer of copolymer 12 and CdSe nanoparticles stabilized with polystyrene‐block‐poly(4‐vinylpyridine). 相似文献
We report the first example of the synthesis and the “schizophrenic” micellization behavior of a multi‐responsive double hydrophilic ABC miktoarm star terpolymer. A well‐defined miktoarm star terpolymer consisting of poly(ethylene glycol), poly(2‐(diethylamino)ethyl methacrylate), and poly(N‐isopropylacrylamide) arms, PEG(‐b‐PDEA)‐b‐PNIPAM, was synthesized via the combination of atom transfer radical polymerization (ATRP) and click reaction. Containing pH‐responsive PDEA and thermo‐responsive PNIPAM arms, this novel type of miktoarm star terpolymer molecularly dissolves in aqueous solution at acidic pH and room temperature, but supramolecularly self‐assembles into PDEA‐core micelles at alkaline pH and room temperature, and PNIPAM‐core micelles at acidic pH and elevated temperatures. Most importantly, both types of micellar aggregates possess well‐solvated hybrid coronas.
Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.
Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects. 相似文献
Multiwalled carbon nanotubes in the form of bucky papers were modified using Ar/O2 plasma and thereafter melt‐mixed into polycarbonate. The effect of plasma modification on the nanotubes was followed by XPS, indicating the formation of carboxylic or ester groups at the nanotube surfaces. In the melt‐mixed nanocomposites, the modified nanotubes exhibited a better macrodispersion and better phase adhesion to the matrix as evidenced by morphological investigations. The electrical percolation threshold was not altered and occurred below 0.5 wt.‐% nanotubes. The mechanical properties were improved by having higher values of stress at yield, stress beyond the yield point, and strain at break illustrating the effect of both better dispersion and enhanced phase adhesion.
Summary: A superhydrophobic coating was facilely fabricated in one step by casting bisphenol A polycarbonate (PC) solution under moisture. Vapor‐induced phase separation occurred during the solidifying process and a rough surface with a micro‐nano‐binary structure (MNBS) similar to the microstructure shown on lotus leaf was formed.
Summary: Amphiphilic graft polyphosphazenes (EtTrp/PNIPAm‐PPP) with different mole ratios of hydrophobic groups to hydrophilic segments were synthesized by ring‐opening polymerization and subsequent substitution reactions. The self‐assembly behavior of these graft copolymers was studied in detail by TEM, SEM, CLSM, and AFM. Depending on the copolymer composition and common organic solvent employed in dialysis process, supramolecular aggregates ranging from network, nanospheres, high‐genus particles to macrophage‐like aggregates were produced with graft copolymers.
Summary: A series of novel mesogen‐jacketed liquid crystal miktoarm star rod‐coil block copolymers were synthesized via atom transfer radical polymerization (ATRP). Their architectures {coil conformation of styrene segment and rigid rod conformation of {2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) segment} were confirmed by GPC, 1H NMR, and MALDI‐TOF studies. The liquid crystalline behaviors of the synthesized copolymers are evidenced from POM observation. The liquid crystalline phase depends on the molecular weights of the rigid rod arm of miktoarm star copolymers.
We describe the preparation and characterization of uniaxial magnetic gels. Fibril formation of the embedded magnetic particles generates easily detectable magnetic and optical anisotropies. A finite magnetization is frozen‐in and leads to a ferromagnetic‐like response in small homogeneous external magnetic fields. We present, for the first time, frequency dependent measurements of the shear modulus G′. Despite their optical and magnetic anisotropy, the gels are mechanically isotropic.
The time‐dependent G′ for a ferrogel in the parallel orientation in a homogeneous field of 200 mT. 相似文献
This contribution presents a new strategy for preparing nanocapsules with a shell made of a supramolecular polymer which repeating units are held together by reversible interactions rather than covalent bonds. These nanocapsules were prepared in classical miniemulsion through interfacial addition reaction of a diisocyanate (IPDI) and a monoamine (iBA), forming low‐molecular weight bis‐ureas moieties which are strong self‐complementary interacting molecules through hydrogen‐bonding. The nanocapsules present a diameter around 100 nm, and MALDI‐TOF MS and 1H NMR analyses confirm the expected molecular characteristics for the shell. This strategy opens the scope of a new type of nanomaterials exhibiting stimuli‐responsiveness due to the reversible interaction linking the repeating units.
This work focused on the synthesis and aqueous self‐assembly of a series of novel hyperbranched star copolymers with a hyperbranched poly[3‐ethyl‐3‐(hydroxymethyl)oxetane] (HBPO) core and many linear poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) arms. The copolymers can synchronously form unimolecular micelles (around 10 nm) and large multimolecular micelles (around 100 nm) in water at room temperature. TEM measurements have provided direct evidence that the large micelles are a kind of multimicelle aggregates (MMAs) with the basic building units of unimolecular micelles. It is the first demonstration of the self‐assembly mechanism for the large multimolecular micelles generated from the solution self‐assembly of hyperbranched copolymers.
Highly efficient and well‐controlled ambient temperature reversible addition–fragmentation chain transfer (RAFT) polymerization is readily carried out under environmentally friendly mild solar radiation. This discovery has significantly extended studies from man‐made separated‐spectroscopic‐emission UV‐vis radiation (Macromolecules 2006 , 39, 3770) to natural continuous‐spectroscopic‐emission solar radiation for ambient temperature RAFT polymerization.
Photo‐induced reversibility as a tool for self‐healing: a reversible photo‐induced dendritic macromonomer was synthesized and proven to form networks with different features depending on the crosslinking conditions. While networks formed from aqueous systems exhibited a reversible change in their crosslinking degree, networks generated in bulk underwent fully reversibility. The latter was then exploited for generating self‐healing materials by means of a photo‐induced treatment.
A new route to high‐performance electrospun polymer fibers was developed using a self‐bundling electrospinning technique combined with post‐treatments such as stretching and annealing under conditions similar to those used for conventional fibers. Self‐bundled electrospun PAN fiber yarns were characterized by SEM, mechanical tests, polarized FT‐IR spectroscopy and WAXD. The obtained results revealed that the PAN nanofiber yarns possessed enhanced alignment, a higher degree of crystallinity and higher molecular orientation after treatments, resulting in a remarkable improvement in mechanical performance, approaching the strength value of the corresponding conventional fibers.
