Preparation of Li4Ti5O12 Yolk–Shell Powders by Spray Pyrolysis and their Electrochemical Properties

We have reported for the first time the preparation of yolk–shell‐structured Li₄Ti₅O₁₂ powders for use as anode materials in lithium‐ion batteries. One Li₄Ti₅O₁₂ yolk–shell‐particle powder is directly formed from each droplet containing lithium, titanium, and carbon components inside the hot wall reactor maintained at 900 °C. The precursor Li₄Ti₅O₁₂ yolk–shell‐particle powders, which are directly prepared by spray pyrolysis, have initial discharge and charge capacities of 155 and 122 mA h g^?1, respectively, at a current density of 175 mA g^?1. Post‐treatment of the yolk–shell‐particle powders at temperatures of 700 and 800 °C improves the initial discharge and charge capacities. The initial discharge capacities of the Li₄Ti₅O₁₂ powders with a yolk–shell structure and a dense structure post‐treated at 800 °C are 189 and 168 mA h g^?1, respectively. After 100 cycles, the corresponding capacities are 172 and 152 mA h g^?1, respectively (retentions of 91 and 90 %).     

Kilogram‐Scale Production of SnO2 Yolk–Shell Powders by a Spray‐Drying Process Using Dextrin as Carbon Source and Drying Additive

A simple and general method for the large‐scale production of yolk–shell powders with various compositions by a spray‐drying process is reported. Metal salt/dextrin composite powders with a spherical and dense structure were obtained by spray drying and transformed into yolk–shell powders by simple combustion in air. Dextrin plays a key role in the preparation of precursor powders for fabricating yolk–shell powders by spray drying. Droplets containing metal salts and dextrin show good drying characteristics even in a severe environment of high humidity. Sucrose, glucose, and polyvinylpyrrolidone are widely used as carbon sources in the preparation of metal oxide/carbon composite powders; however, they are not appropriate for large‐scale spray‐drying processes because of their caramelization properties and adherence to the surface of the spray dryer. SnO₂ yolk–shell powders were studied as the first target material in the spray‐drying process. Combustion of tin oxalate/dextrin composite powders at 600 °C in air produced single‐shelled SnO₂ yolk–shell powders with the configuration SnO₂@void@SnO₂. The SnO₂ yolk–shell powders prepared by the simple spray‐drying process showed superior electrochemical properties, even at high current densities. The discharge capacities of the SnO₂ yolk–shell powders at a current density of 2000 mA g^?1 were 645 and 570 mA h g^?1 for the second and 100th cycles, respectively; the corresponding capacity retention measured for the second cycle was 88 %.     

One‐Pot Method for Synthesizing Spherical‐Like Metal Sulfide–Reduced Graphene Oxide Composite Powders with Superior Electrochemical Properties for Lithium‐Ion Batteries

A facile, one‐pot method for synthesizing spherical‐like metal sulfide–reduced graphene oxide (RGO) composite powders by spray pyrolysis is reported. The direct sulfidation of ZnO nanocrystals decorated on spherical‐like RGO powders resulted in ZnS–RGO composite powders. ZnS nanocrystals with a size below 20 nm were uniformly dispersed on spherical‐like RGO balls. The discharge capacities of the ZnS–RGO, ZnO–RGO, bare ZnS, and bare ZnO powders at a current density of 1000 mA g^?1 after 300 cycles were 628, 476, 230, and 168 mA h g^?1, respectively, and the corresponding capacity retentions measured after the first cycles were 93, 70, 40, and 21 %, respectively. The discharge capacity of the ZnS–RGO composite powders at a high current density of 4000 mA g^?1 after 700 cycles was 437 mA h g^?1. The structural stability of the highly conductive ZnS–RGO composite powders with ultrafine crystals during cycling resulted in excellent electrochemical properties.     

Preparation of Yolk‐Shell and Filled Co9S8 Microspheres and Comparison of their Electrochemical Properties

In this study, we report the first preparation of phase‐pure Co₉S₈ yolk–shell microspheres in a facile two‐step process and their improved electrochemical properties. Yolk–shell Co₃O₄ precursor microspheres are initially obtained by spray pyrolysis and are subsequently transformed into Co₉S₈ yolk–shell microspheres by simple sulfidation in the presence of thiourea as a sulfur source at 350 °C under a reducing atmosphere. For comparison, filled Co₉S₈ microspheres were also prepared using the same procedure but in the absence of sucrose during the spray pyrolysis. The prepared yolk–shell Co₉S₈ microspheres exhibited a Brunauer–Emmett–Teller (BET) specific surface area of 18 m² g^?1 with a mean pore size of 16 nm. The yolk–shell Co₉S₈ microspheres have initial discharge and charge capacities of 1008 and 767 mA h g^?1 at a current density of 1000 mA g^?1, respectively, while the filled Co₉S₈ microspheres have initial discharge and charge capacities of 838 and 638 mA h g^?1, respectively. After 100 cycles, the discharge capacities of the yolk–shell and filled microspheres are 634 and 434 mA h g^?1, respectively, and the corresponding capacity retentions after the first cycle are 82 % and 66 %.     

Sulfur‐Impregnated Core–Shell Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Core–shell hierarchical porous carbon spheres (HPCs) were synthesized by a facile hydrothermal method and used as host to incorporate sulfur. The microstructure, morphology, and specific surface areas of the resultant samples have been systematically characterized. The results indicate that most of sulfur is well dispersed over the core area of HPCs after the impregnation of sulfur. Meanwhile, the shell of HPCs with void pores is serving as a retard against the dissolution of lithium polysulfides. This structure can enhance the transport of electron and lithium ions as well as alleviate the stress caused by volume change during the charge–discharge process. The as‐prepared HPC‐sulfur (HPC‐S) composite with 65.3 wt % sulfur delivers a high specific capacity of 1397.9 mA h g^?1 at a current density of 335 mA g^?1 (0.2 C) as a cathode material for lithium–sulfur (Li‐S) batteries, and the discharge capacity of the electrode could still reach 753.2 mA h g^?1 at 6700 mA g^?1 (4 C). Moreover, the composite electrode exhibited an excellent cycling capacity of 830.5 mA h g^?1 after 200 cycles.     

A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

Superior Lithium‐Ion Storage Properties of Mesoporous CuO–Reduced Graphene Oxide Composite Powder Prepared by a Two‐Step Spray‐Drying Process

Mesoporous CuO–reduced graphene oxide (rGO) composite powders were prepared by using a two‐step spray‐drying process. In the first step, hollow CuO powders were prepared from a spray solution of copper nitrate trihydrate with citric acid and were wet milled to obtain a colloidal spray solution. In the second step, spray drying of the colloidal solution that contained dispersed GO nanosheets produced mesoporous CuO–rGO composite powders with particle sizes of several microns. Thermal reduction of GO nanosheets to rGO nanosheets occurred during post‐treatment at 300 °C. Initial discharge capacities of the hollow CuO, bare CuO aggregate, and CuO–rGO composite powders at a current density of 2 A g^?1 were 838, 1145, and 1238 mA h g^?1, respectively. Their discharge capacities after 200 cycles were 259, 380, and 676 mA h g^?1, respectively, and their corresponding capacity retentions measured from the second cycle were 67, 48, and 76 %, respectively. The mesoporous CuO–rGO composite powders have high structural stability and high conductivity because of the rGO nanosheets, and display good cycling and rate performances.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

Core–Shell Carbon‐Coated CuO Nanocomposites: A Highly Stable Electrode Material for Supercapacitors and Lithium‐Ion Batteries

Herein we present a simple method for fabricating core–shell mesostructured CuO@C nanocomposites by utilizing humic acid (HA) as a biomass carbon source. The electrochemical performances of CuO@C nanocomposites were evaluated as an electrode material for supercapacitors and lithium‐ion batteries. CuO@C exhibits an excellent capacitance of 207.2 F g^?1 at a current density of 1 A g^?1 within a potential window of 0–0.46 V in 6 M KOH solution. Significantly, CuO electrode materials achieve remarkable capacitance retentions of approximately 205.8 F g^?1 after 1000 cycles of charge/discharge testing. The CuO@C was further applied as an anode material for lithium‐ion batteries, and a high initial capacity of 1143.7 mA h g^?1 was achieved at a current density of 0.1 C. This work provides a facile and general approach to synthesize carbon‐based materials for application in large‐scale energy‐storage systems.     

Sodium‐Ion Storage Properties of FeS–Reduced Graphene Oxide Composite Powder with a Crumpled Structure

The sodium‐ion storage properties of FeS–reduced graphene oxide (rGO) and Fe₃O₄‐rGO composite powders with crumpled structures have been studied. The Fe₃O₄‐rGO composite powder, prepared by one‐pot spray pyrolysis, could be transformed to an FeS‐rGO composite powder through a simple sulfidation treatment. The mean size of the Fe₃O₄ nanocrystals in the Fe₃O₄‐rGO composite powder was 4.4 nm. After sulfidation, FeS nanocrystals of size several hundred nanometers were confined within the crumpled structure of the rGO matrix. The initial discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders were 740 and 442 mA h g^?1, and their initial charge capacities were 530 and 165 mA h g^?1, respectively. The discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders at the 50th cycle were 547 and 150 mA h g^?1, respectively. The FeS‐rGO composite powder showed superior sodium‐ion storage performance compared to the Fe₃O₄‐rGO composite powder.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

Electrochemical Properties of Tin Oxide Flake/Reduced Graphene Oxide/Carbon Composite Powders as Anode Materials for Lithium‐Ion Batteries

Hierarchically structured tin oxide/reduced graphene oxide (RGO)/carbon composite powders are prepared through a one‐pot spray pyrolysis process. SnO nanoflakes of several hundred nanometers in diameter and a few nanometers in thickness are uniformly distributed over the micrometer‐sized spherical powder particles. The initial discharge and charge capacities of the tin oxide/RGO/carbon composite powders at a current density of 1000 mA g^?1 are 1543 and 1060 mA h g^?1, respectively. The discharge capacity of the tin oxide/RGO/carbon composite powders after 175 cycles is 844 mA h g^?1, and the capacity retention measured from the second cycle is 80 %. The transformation during cycling of SnO nanoflakes, uniformly dispersed in the tin oxide/RGO/carbon composite powder, into ultrafine nanocrystals results in hollow nanovoids that act as buffers for the large volume changes that occur during cycling, thereby improving the cycling and rate performances of the tin oxide/RGO/carbon composite powders.     

One‐Pot Synthesis of CoSex–rGO Composite Powders by Spray Pyrolysis and Their Application as Anode Material for Sodium‐Ion Batteries

A simple one‐pot synthesis of metal selenide/reduced graphene oxide (rGO) composite powders for application as anode materials in sodium‐ion batteries was developed. The detailed mechanism of formation of the CoSe_x–rGO composite powders that were selected as the first target material in the spray pyrolysis process was studied. The crumple‐structured CoSe_x–rGO composite powders prepared by spray pyrolysis at 800 °C had a crystal structure consisting mainly of Co_0.85Se with a minor phase of CoSe₂. The bare CoSe_x powders prepared for comparison had a spherical shape and hollow structure. The discharge capacities of the CoSe_x–rGO composite and bare CoSe_x powders in the 50th cycle at a constant current density of 0.3 A g^?1 were 420 and 215 mA h g^?1, respectively, and their capacity retentions measured from the second cycle were 80 and 46 %, respectively. The high structural stability of the CoSe_x–rGO composite powders for repeated sodium‐ion charge and discharge processes resulted in superior sodium‐ion storage properties compared to those of the bare CoSe_x powders.     

Facile Synthesis of Ge@C Core–Shell Nanocomposites for High‐Performance Lithium Storage in Lithium‐Ion Batteries

Herein, we report a facile and “green” synthetic route for the preparation of Ge@C core–shell nanocomposites by using a low‐cost Ge precursor. Field‐emission scanning electron microscopy and transmission electron microscopy analyses confirmed the core–shell nanoarchitecture of the Ge@C nanocomposites, with particle sizes ranging from 60 to 100 nm. Individual Ge nanocrystals were coated by a continuous carbon layer, which had an average thickness of 2 nm. When applied as an anode materials for lithium‐ion batteries, the Ge@C nanocomposites exhibited a high initial discharge capacity of 1670 mAh g^?1 and superior rate capability. In particular, Ge@C nanocomposite electrodes maintained a reversible capacity of 734 mAh g^?1 after repeated cycling at a current density of 800 mA g^?1 over 100 cycles.     

Long‐Life Room‐Temperature Sodium–Sulfur Batteries by Virtue of Transition‐Metal‐Nanocluster–Sulfur Interactions

Room‐temperature sodium–sulfur (RT‐Na/S) batteries hold significant promise for large‐scale application because of low cost of both sodium and sulfur. However, the dissolution of polysulfides into the electrolyte limits practical application. Now, the design and testing of a new class of sulfur hosts as transition‐metal (Fe, Cu, and Ni) nanoclusters (ca. 1.2 nm) wreathed on hollow carbon nanospheres (S@M‐HC) for RT‐Na/S batteries is reported. A chemical couple between the metal nanoclusters and sulfur is hypothesized to assist in immobilization of sulfur and to enhance conductivity and activity. S@Fe‐HC exhibited an unprecedented reversible capacity of 394 mAh g^?1 despite 1000 cycles at 100 mA g^?1, together with a rate capability of 220 mAh g^?1 at a high current density of 5 A g^?1. DFT calculations underscore that these metal nanoclusters serve as electrocatalysts to rapidly reduce Na₂S₄ into short‐chain sulfides and thereby obviate the shuttle effect.     

Sulfur Encapsulated in a TiO2‐Anchored Hollow Carbon Nanofiber Hybrid Nanostructure for Lithium–Sulfur Batteries

A hollow carbon nanofiber hybrid nanostructure anchored with titanium dioxide (HCNF@TiO₂) was prepared as a matrix for effective trapping of sulfur and polysulfides as a cathode material for Li–S batteries. The synthesized composites were characterized and examined by X‐ray diffraction, nitrogen adsorption–desorption measurements, field‐emission scanning electron microscopy, scanning transmission electron microscopy, and electrochemical methods such as galvanostatic charge/discharge, rate performance, and electrochemical impedance spectroscopy tests. The obtained HCNF@TiO₂–S composite showed a clear core–shell structure with TiO₂ nanoparticles coating the surface of the HCNF and sulfur homogeneously distributed in the coating layer. The HCNF@TiO₂–S composite exhibited much better electrochemical performance than the HCNF–S composite, which delivered an initial discharge capacity of 1040 mA h g^?1 and maintained 650 mAh g^?1 after 200 cycles at a 0.5 C rate. The improvements of electrochemical performances might be attributed to the unique hybrid nanostructure of HCNF@TiO₂ and good dispersion of sulfur in the HCNF@TiO₂–S composite.     

Alkaline–Acid Zn–H2O Fuel Cell for the Simultaneous Generation of Hydrogen and Electricity

An alkaline–acid Zn–H₂O fuel cell is proposed for the simultaneous generation of electricity with an open circuit voltage of about 1.25 V and production of H₂ with almost 100 % Faradic efficiency. We demonstrate that, as a result of harvesting energy from both electrochemical neutralization and electrochemical Zn oxidation, the as‐developed hybrid cell can deliver a power density of up to 80 mW cm^?2 and an energy density of 934 Wh kg^?1 and maintain long‐term stability for H₂ production with an output voltage of 1.16 V at a current density of 10 mA cm^?2.     

Dual‐Confined Sulfur Nanoparticles Encapsulated in Hollow TiO2 Spheres Wrapped with Graphene for Lithium–Sulfur Batteries

Lithium–sulfur (Li?S) batteries are attractive owing to their higher energy density and lower cost compared with the universally used lithium‐ion batteries (LIBs), but there are some problems that stop their practical use, such as low utilization and rapid capacity‐fading of the sulfur cathode, which is mainly caused by the shuttle effect, and the uncontrollable deposition of lithium sulfide species. Herein, we report the design and fabrication of dual‐confined sulfur nanoparticles that were encapsulated inside hollow TiO₂ spheres; the encapsulated nanoparticles were prepared by a facile hydrolysis process combined with acid etching, followed by “wrapping” with graphene (G?TiO₂@S). In this unique composite architecture, the hollow TiO₂ spheres acted as effective sulfur carriers by confining the polysulfides and buffering volume changes during the charge‐discharge processes by means of physical force from the hollow spheres and chemical binding between TiO₂ and the polysulfides. Moreover, the graphene‐wrapped skin provided an effective 3D conductive network to improve the electronic conductivity of the sulfur cathode and, at the same time, to further suppress the dissolution of the polysulfides. As results, the G?TiO₂@S hybrids exhibited a high and stable discharge capacity of up to 853.4 mA h g^?1 over 200 cycles at 0.5 C (1 C=1675 mA g^?1) and an excellent rate capability of 675 mA h g^?1 at a current rate of 2 C; thus, G?TiO₂@S holds great promise as a cathode material for Li?S batteries.     

Preparation and Electrochemical Properties of Tin–Iron–Carbon Nanocomposite as the Anode of Lithium‐Ion Batteries

Tin–iron–carbon nanocomposite is successfully prepared by a sol–gel method followed by a chemical vapor deposition (CVD) process with acetylene gas as the carbon source. The structural properties, morphology, and electrochemical performances of the nanocomposite are comprehensively studied in comparison with those properties of tin–carbon and iron–carbon nanocomposites. Sheet‐like carbon architecture and different carbon contents are induced thanks to the catalytic effect of iron during CVD. Among three nanocomposites, tin–iron–carbon demonstrates the highest reversible capacity of 800 mA h g^?1 with 96.9 % capacity retention after 50 cycles. It also exhibits the best rate capability with a discharge capacity of 420 mA h g^?1 at a current density of 1000 mA g^?1. This enhanced performance is strongly related to the carbon morphology and content, which can not only accommodate the large volume change, but also improve the electronic conductivity of the nanocomposite. Hence, the tin–iron–carbon nanocomposite is expected to be a promising anode for lithium‐ion batteries.     

Zinc‐Reduced Mesoporous TiOx Li‐Ion Battery Anodes with Exceptional Rate Capability and Cycling Stability

We demonstrate a unique synthetic route for oxygen‐deficient mesoporous TiO_x by a redox–transmetalation process by using Zn metal as the reducing agent. The as‐obtained materials have significantly enhanced electronic conductivity; 20 times higher than that of as‐synthesized TiO₂ material. Moreover, electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) measurements are performed to validate the low charge carrier resistance of the oxygen‐deficient TiO_x. The resulting oxygen‐deficient TiO_x battery anode exhibits a high reversible capacity (～180 mA h g^?1 at a discharge/charge rate of 1 C/1 C after 400 cycles) and an excellent rate capability (～90 mA h g^?1 even at a rate of 10 C). Also, the full cell, which is coupled with a LiCoO₂ cathode material, exhibits an outstanding rate capability (>75 mA h g^?1 at a rate of 3.0 C) and maintains a reversible capacity of over 100 mA h g^?1 at a discharge/charge of 1 C/1 C for 300 cycles.