Ganglioside‐Selective Mechanosensitive Fluorescent Membrane Probes

The development of fluorescent probes to image forces in cells is an important challenge in chemistry and biology. Planarizable push‐pull probes have been introduced recently for this purpose. To provide most valuable information on forces in complex systems, these mechanosensitive ‘flipper’ probes will have to be localized by molecular recognition of targets of interest. Here we report fluorescent flippers that selectively recognize gangliosides on the surface of lipid bilayer membranes by formation of dynamic covalent boronate esters. The original flipper probes were equipped with 2‐fluorophenyl boronic acids and benzoboroxoles using consecutive triazole and oxime ligation. Evaluation was done in large unilamellar vesicles composed of EYPC/SM/CL/GM 40:40‐x:20:x to obtain mixed membranes with separate liquid‐disordered (L_d) and ganglioside (GM) containing liquid‐ordered (L_o) domains. With increasing GM concentration, fluorescence intensities increased and excitation maximum shifted to the red. Deconvolution of the spectra confirmed that these changes originate from a migration of the flipper probes from L_d to L_o domains upon binding to the gangliosides and thus the planarization in the more ordered environment. Control mechanophores without boronic acids failed to show the same response, and fructose partially inhibited the ganglioside sensitivity. These results demonstrate that it is possible to selectively accumulate mechanosensitive flipper probes in L_o domains and, more generally, that probe localization in complex membranes is possible and matters.     

A Sensitive and Selective Fluorescent Probe for Cysteine Based on a New Response‐Assisted Electrostatic Attraction Strategy: The Role of Spatial Charge Configuration

A new strategy for fast fluorescent detection of cysteine (Cys), based on a response‐assisted electrostatic attraction, is demonstrated. By utilizing this strategy, we designed and synthesized three fluorescent probes for the specific detection of Cys under actual physiological conditions. The probe m‐ CP , a coumarin fluorophore conjugated with a substituted methyl pyridinium group through an unsaturated ketone unit, showed highly selective and sensitive detection for cysteine (Cys) over homocysteine (Hcy) and glutathione (GSH). The kinetic analysis indicated that the sensing process was highly accelerated (a response time less than 1 min) by the response‐assisted electrostatic attraction. More importantly, control experiments with isomeric probes first demonstrated that the spatial charge configuration of the probe played an important role in Cys‐preferred selectivity and kinetic rate acceleration. Furthermore, the practical utility of the probe m‐ CP in the fluorescent labeling of Cys residues within proteins was demonstrated. Finally, these probes were employed in living cell imaging with HeLa cells, in which it displayed satisfactory cell permeability and enabled us to distinguish active thiols in the cytoplasm, nucleus, and mitochondria.     

A Native‐Chemical‐Ligation‐Mechanism‐Based Ratiometric Fluorescent Probe for Aminothiols

Thiol‐containing amino acids (aminothiols) such as cysteine (Cys) and homocysteine (Hcy) play a key role in various biological processes including maintaining the homeostasis of biological thiols. However, abnormal levels of aminothiols are associated with a variety of diseases. The native chemical ligation (NCL) reaction has attracted great attention in the fields of chemistry and biology. NCL of peptide segments involves cascade reactions between a peptide‐α‐thioester and an N‐terminal cysteine peptide. In this work, we employed the NCL reaction mechanism to formulate a Förster resonance energy transfer (FRET) strategy for the design of ratiometric fluorescent probes that were selective toward aminothiols. On the basis of this new strategy, the ratiometric fluorescent probe 1 for aminothiols was judiciously designed. The new probe is highly selective toward aminothiols over other thiols and exhibits a very large variation (up to 160‐fold) in its fluorescence ratio (I₄₅₈/I₆₀₃). The new fluorescent probe is capable of ratiometric detection of aminothiols in newborn calf and human serum samples and is also suitable for ratiometric fluorescent imaging of aminothiols in living cells.     

o‐Fluorination of Aromatic Azides Yields Improved Azido‐Based Fluorescent Probes for Hydrogen Sulfide: Synthesis,Spectra, and Bioimaging

Hydrogen sulfide (H₂S) is an endogenously produced gaseous signaling molecule with multiple biological functions. To visualize the endogenous in situ production of H₂S in real time, new coumarin‐ and boron‐dipyrromethene‐based fluorescent turn‐on probes were developed for fast sensing of H₂S in aqueous buffer and in living cells. Introduction of a fluoro group in the ortho position of the aromatic azide can lead to a greater than twofold increase in the rate of reaction with H₂S. On the basis of o‐fluorinated aromatic azides, fluorescent probes with high sensitivity and selectivity toward H₂S over other biologically relevant species were designed and synthesized. The probes can be used to in situ to visualize exogenous H₂S and D ‐cysteine‐dependent endogenously produced H₂S in living cells, which makes them promising tools for potential applications in H₂S biology.     

A special o-dialdehyde fluorescent probe simultaneously sensing Hcy,GSH and its application in living cells and zebrafish imaging

The development of fluorescent probes enabling to distinguish Cys, Hcy and GSH has always been a considerable challenge, in particular the distinction of Hcy and other two biothiols, because Hcy has a very similar structure with Cys and a relatively lower concentration in living organisms. In this work, a special o-dialdehyde fluorescent probe, quinoline-2,3-dicarboxaldehyde (QDA), has been synthesized and demonstrated superior performance in differentiating detection of Hcy and GSH, which is different from the previous reported o-dialdehyde probes specifically detecting GSH. Furthermore, the probe can selectively distinguish Hcy and GSH from different signal channels in living cells and zebrafish, meaning it has great potential in biological applications. This finding will provide a novel idea for the design of fluorescent probes to distinguish biothiols.     

Target‐Triggered NIR Emission with a Large Stokes Shift for the Detection and Imaging of Cysteine in Living Cells

Background autofluorescence from biological systems generally reduces the sensitivity of a fluorescent probe for imaging biological targets. Addressing this challenge requires the development of fluorescent probes that produce emission in the near‐infrared region. Herein, we report the design and synthesis of a fluorescent probe that generates an NIR emission with a large Stokes shift upon the selective response to Cys over Hcy and GSH. The probe is designed to consist of two Cys‐sensing sites, an acrylate ester and an aldehyde installed ortho to each other. The reaction of the probe with Cys triggers an excited state intramolecular proton transfer process upon photo‐excitation, thereby producing an NIR emission with a large Stokes shift. Accordingly, this probe hold great promise for the selective detection of Cys in biological systems. We further demonstrate the capacity of this probe for Cys imaging in living cells.     

Tetrathienylethene‐based Positional Isomers with Aggregation‐induced Emission Enabling Super Red‐shifted Reversible Mechanochromism and Naked‐eye Sensing of Hydrazine Vapor

AIE‐active positional isomers, TTE‐o‐PhCHO , TTE‐m‐PhCHO and TTE‐p‐PhCHO , tetrathienylethene ( TTE) derivates with peripherally attached ortho‐/meta‐/para‐formyl phenyl groups, were designed and synthesized. The formyl substitution position can effectively modulate their photophysical properties, mechanochromism and fluorescent response to hydrazine. TTE‐o‐PhCHO and TTE‐m‐PhCHO exhibit remarkable AIE characteristics, and TTE‐p‐PhCHO possesses aggregation‐induced emission enhancement performance. They all exhibit high contrast mechanochromism, and TTE‐m‐PhCHO shows larger red‐shift (164 nm) than TTE‐o‐PhCHO (104 nm) and TTE‐p‐PhCHO (125 nm) due to the more twisted molecular conformation and much looser molecular packing. Moreover, TTE‐o‐PhCHO with a higher contrast color change can be used as ink‐free rewritable paper. In addition, TTE‐p‐PhCHO , as a turn‐on fluorescent probe, can selectively detect hydrazine with significant color changes that are visible by the naked eye . Therefore, the position dependence of groups would be an effective method to modulate the molecular arrangement, as well as develop AIE compounds for mechano‐stimuli responsive materials, ink‐free rewritable papers and chemosensors.     

An Aurone‐derived Low‐molecular‐weight Fluorescence Probe for the Detection of Hg2+ in Aqueous Solution and Living Cells

A low‐molecular‐weight fluorescent probe 1 (M.W. = 238.24) based on aurone was synthesized, and its application in fluorescent detection of Hg²⁺ in aqueous solution and living cells was reported. It exhibited an “on–off” fluorescent response toward Hg²⁺ in aqueous solution. Both the color and fluorescence changes of the probe were remarkably specific for Hg²⁺ in the presence of other common metal ions, satisfying the selective requirements for biomedical and environmental monitoring application. The probe has been applied in direct measurement of Hg²⁺ content in river water samples and imaging of Hg²⁺ in living cells, which further indicates the potential application values in environmental and biological systems.     

Benzo[1,2‐d:4,5‐d′]bisimidazoles as a Convenient Platform Towards Dyes that are Capable of Excited‐State Intramolecular Proton Transfer and of Two‐Photon Absorption

New, strongly fluorescent benzo[1,2‐d:4,5‐d′]bisimidazoles have been prepared by the reaction of Bandrowski′s base with various aldehydes. Their structures were carefully designed to achieve efficient excited‐state intramolecular proton transfer and good two‐photon‐absorption (2PA) cross‐sections. Functional dyes that possessed both high fluorescence quantum yields and large Stokes shifts were prepared. A π‐expanded D‐A‐D derivative that possessed Φ_fl=50 % and σ₂=230 GM in the spectroscopic area of interest for biological imaging is an excellent candidate as a fluorescent probe. Thanks to the presence of two reactive amino groups, such compounds can be easily transformed into probes for bioconjugation. All of these benzo[1,2‐d:4,5‐d′]bisimidazoles were also strongly fluorescent in the solid state.     

Two‐Photon Probes for Zn2+ Ions with Various Dissociation Constants. Detection of Zn2+ Ions in Live Cells and Tissues by Two‐Photon Microscopy

A series of Zn²⁺‐selective two‐photon fluorescent probes (AZnM1−AZnN) that had a wide range of dissociation constants (K_d^TP=8 nm‐ 12 μM ) were synthesized. These probes showed appreciable water solubility (>3 μM ), cell permeability, high photostability, pH insensitivity at pH>7, significant two‐photon action cross‐sections (86–110 GM) upon complexation with Zn²⁺, and can detect the Zn²⁺ ions in HeLa cells and in living tissue slices of rat hippocampal at a depth of >80 μm without mistargeting and photobleaching problems. These probes can potentially find application in the detection of various amounts of Zn²⁺ ions in live cells and intact tissues.     

Green Synthesis of Red‐Emitting Carbon Nanodots as a Novel “Turn‐on” Nanothermometer in Living Cells

Temperature measurements in biology and medical diagnostics, along with sensitive temperature probing of living cells, is of great importance; however, it still faces significant challenges. Herein, a novel “turn‐on” carbon‐dot‐based fluorescent nanothermometry device for spatially resolved temperature measurements in living cells is presented. The carbon nanodots (CNDs) are prepared by a green microwave‐assisted method and exhibit red fluorescence (λ_em=615 nm) with high quantum yields (15 %). Then, an on–off fluorescent probe is prepared for detecting glutathione (GSH) based on aggregation‐induced fluorescence quenching. Interestingly, the quenched fluorescence could be recovered by increasing temperature and the CNDs–GSH mixture could behave as an off–on fluorescent probe for temperature. Thus, red‐emitting CNDs can be utilized for “turn‐on” fluorescent nanothermometry through the fluorescence quenching and recovery processes, respectively. We employ MC3T3‐E1 cells as an example model to demonstrate the red‐emitting CNDs can function as “non‐contact” tools for the accurate measurement of temperature and its gradient inside a living cell.     

Phenoxazine‐based Near‐infrared Fluorescent Probes for the Specific Detection of Copper (II) Ions in Living Cells

Abstract : It is well known that copper ions play a critical role in various physiological processes. However, a variety of human diseases are tightly correlated with copper overload. Although there are numerous fluorescent probes capable of detecting copper ions, most of them are “turn‐off” probes owing to copper (II) ions fluorescence quenching effect, resulting in poor sensitivity. Herein, a novel “turn‐on” near‐infrared (NIR) fluorescent probe PZ‐N based on phenoxazine was designed and synthesized for the selective detection of copper (II) ions (Cu²⁺). Upon the addition of Cu²⁺, the probe could quickly react with Cu²⁺ and emit strong fluorescence, along with colour change from colourless to obvious blue. Moreover, the probe PZ‐N showed good water solubility, high selectivity, and excellent sensitivity with low limit of detection (1.93 nM) towards copper (II) ions. More importantly, PZ‐N was capable of effectively detecting Cu²⁺ in living cells.     

Labeling and Protecting N‐Terminal Protein Positions by β‐Peptidyl Aminopeptidase‐Catalyzed Attachment of β‐Amino‐Acid Residues – Insulin as a First Example

We have shown for the first time that a natural protein (human insulin) can be acylated at the N‐terminus with a β‐amino acid (H‐β³hAla‐), in a process catalyzed by the β‐peptidyl aminopeptidase 3‐2W4‐BapA. This selective modification, which could also be applied for protein labeling and tagging, should be generally useful, also to protect peptides and proteins from attack by common aminopeptidases.     

Development of Photoactivated Fluorescent N‐Hydroxyoxindoles and Their Application for Cell‐Selective Imaging

Photoactivatable fluorophores are essential tools for studying the dynamic molecular interactions within important biological systems with high spatiotemporal resolution. However, currently developed photoactivatable fluorophores based on conventional dyes have several limitations including reduced photoactivation efficiency, cytotoxicity, large molecular size, and complicated organic synthesis. To overcome these challenges, we herein report a class of photoactivatable fluorescent N‐hydroxyoxindoles formed through the intramolecular photocyclization of substituted o‐nitrophenyl ethanol (ONPE). These oxindole fluorophores afford excellent photoactivation efficiency with ultra‐high fluorescence enhancement (up to 800‐fold) and are small in size. Furthermore, the oxindole derivatives show exceptional biocompatibility by generating water as the only photolytic side product. Moreover, structure–activity relationship analysis clearly revealed the strong correlation between the fluorescent properties and the substituent groups, which can serve as a guideline for the further development of ONPE‐based fluorescent probes with desired photophysical and biological properties. As a proof‐of‐concept, we demonstrated the capability of a new substituted ONPE that has an uncaging wavelength of 365–405 nm and an excitation/emission at 515 and 620 nm, for the selective imaging of a cancer cell line (Hela cells) and a human neural stem cell line (hNSCs).     

Enzyme‐Triggered Fluorescence Turn‐on: A Probe for Specifically Imaging Ovarian‐Cancer‐Related γ‐Glutamyltranspeptidase

A fluorescent turn‐on probe for specifically targeting γ ‐glutamyltranspeptidase (GGT ) was designed and synthesized by integrating boron‐dipyrromethene (BODIPY ) as a chromophore and glutathione (GSH ) as the GGT substrate. GGT ‐catalyzed the cleavage of the γ ‐glutamyl bond and generated the aromatic hydrocarbon transfer between the sulfur and the nitrogen atom in BODIPY , leading to distinct optical changes. Such specific responsiveness provides an easily distinguishable fluorescence signal to visualize the GGT activity in living cells and differentiate GGT ‐positive cancer cells from GGT ‐negative cells.     

Synthetic dsDNA‐Binding Peptides Using Natural Compounds as Model

We have developed a series of short DNA‐binding peptides containing newly synthesized, unnatural as well as natural amino acid building blocks. By a combinatorial‐library approach, oligopeptides were developed with moderate dsDNA‐binding affinities. Two strategies were used to further enhance the binding affinity of the lead peptides: Ac‐Arg‐Ual‐Sar‐Chi‐Chi‐Chi‐Arg‐NH₂ and Ac‐Arg‐Cbg‐Cha‐Chi‐Chi‐Tal‐Arg‐NH₂. Site‐selective amino acid substitutions increased the binding affinities up to 2 × 10^?5 M . Further enhancement of the binding affinities could be achieved by coupling of an acridine intercalating unit, using linker arms of different length and flexibility. With the introduction of a new lysine‐based acridine unit, different types of oligopeptide–acridine conjugates were designed using known dsDNA‐binding ligands as model compounds. The binding capacities of these new oligopeptide–acridine conjugates have been investigated by a fluorescent intercalator (ethidium bromide) displacement (FID) assay. With the synthesis of the dipeptide–acridine conjugates, binding affinities in the low micromolar range were obtained (6.4 × 10^?6 M ), which is similar to the binding strength of the well‐known DNA binder Hoechst 33258.     

A Naphthalimide‐Based Cd2+ Fluorescent Probe with Carbamoylmethyl Groups Working as Chelators and PET‐Promoters under Neutral Conditions

We have developed a novel naphthalimide‐based Cd²⁺ fluorescent probe ( 1 ), featuring almost no background response, high sensitivity and selectivity toward Cd²⁺ through its high association constant [K=(2.10±0.423)×10⁶], and a practical working pH range. Membrane‐permeability was conferred on 1 by replacing the imide and amide substituents with n‐butyl groups, and hence the derivative ( 4 ) has found practical utility on fluorescent imaging of Cd²⁺ in HeLa cells. Comparison of fluorescent properties between various compounds derived from 1 has demonstrated that the carbamoylmethyl groups in 1 function not only as Cd²⁺ chelators but also as promoters for photoinduced electron transfer (PET) by lowering the basicity of the two tertiary amino groups. As a result, 1 and 4 exhibited highly practical performance as Cd²⁺ probes under neutral conditions.     

Synthesis and Antiproliferative Activities of OSW‐1 Analogues Bearing 2”‐O‐p‐Acylaminobenzoyl Residues†

OSW‐1 is a well‐known natural saponin with potent antitumor activities. We have designed and prepared a small library of 22 OSW‐1 analogues with a variety of p‐acylamino‐benzoyl groups installed at C2” of the xylose residue, wherein a regioselective (1→3)‐glycosylation of arabinoside 3,4‐diol has been achieved by manipulation of the protecting groups on the imidate donors. Bioassays lead to new structure‐activity relationships as well as two applicable fluorescent probes, which are found to localize to lysosomes in HeLa cells and could be used in further antitumor mechanism studies of OSW‐1 in living cells.     

Synthesis of well‐defined poly(dimethylsiloxane) telechelics having nitrobenzoxadiazole fluorescent chain‐ends via thiol‐ene coupling

Well‐defined PDMS telechelics having nitrobenzoxadiazole (NBD) fluorescent probes covalently attached at both chain‐ends were prepared in two steps and a series of fractionation procedures starting from commercially available divinyl‐terminated PDMS having a broad molar mass dispersity. First, thiol‐ene coupling between 6‐mercapto‐1‐hexanol and vinyl chain‐ends allowed the formation of dihydroxy‐terminated PDMS telechelics through the formation of a thioether linkage. The resulting material was then sequentially fractionated using dichloromethane/methanol mixtures to afford several well‐defined dihydroxy‐terminated PDMS fractions having sharp distributions of molar masses (M_n = 99.5–158 kDa and ? < 1.2). The NBD fluorescent probes were then attached at both chain‐ends by N,N′‐dicyclohexylcarbodiimide/4‐(dimethylamino)pyridine esterification coupling between the hydroxyl groups and 6‐(7‐nitrobenzofurazan‐4‐ylamino)hexanoic acid. The resulting fluorescent PDMS telechelics were characterized by SEC, ¹H NMR, UV–visible, and fluorescence spectroscopies. These materials are suitable probes to investigate the dynamics of polymer chains in bulk or at interfaces by the fringe pattern fluorescent recovery after photobleaching technique. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A Rotational BODIPY Nucleotide: An Environment‐Sensitive Fluorescence‐Lifetime Probe for DNA Interactions and Applications in Live‐Cell Microscopy

Fluorescent probes for detecting the physical properties of cellular structures have become valuable tools in life sciences. The fluorescence lifetime of molecular rotors can be used to report on variations in local molecular packing or viscosity. We used a nucleoside linked to a meso‐substituted BODIPY fluorescent molecular rotor ( dC^bdp ) to sense changes in DNA microenvironment both in vitro and in living cells. DNA incorporating dC^bdp can respond to interactions with DNA‐binding proteins and lipids by changes in the fluorescence lifetimes in the range 0.5–2.2 ns. We can directly visualize changes in the local environment of exogenous DNA during transfection of living cells. Relatively long fluorescence lifetimes and extensive contrast for detecting changes in the microenvironment together with good photostability and versatility for DNA synthesis make this probe suitable for analysis of DNA‐associated processes, cellular structures, and also DNA‐based nanomaterials.