Streptococcus mutans and Streptococcus intermedius adhesion to fibronectin films are oppositely influenced by ionic strength

Bacterial adhesion to protein-coated surfaces is mediated by an interplay of specific and nonspecific interactions. Although nonspecific interactions are ubiquitously present, little is known about the physicochemical mechanisms of specific interactions. The aim of this paper is to determine the influence of ionic strength on the adhesion of two streptococcal strains to fibronectin films. Streptococcus mutans LT11 and Streptococcus intermedius NCTC11324 both possess antigen I/II with the ability to bind fibronectin from solution, but S. intermedius binds approximately 20x less fibronectin than does the S. mutans strain under identical conditions. Both strains as well as fibronectin films are negatively charged in low ionic strength phosphate buffered saline (PBS, 10x diluted), but bacteria appear uncharged in high ionic strength PBS. Physicochemical modeling on the basis of overall cell surface properties (cell surface hydrophobicity and zeta potentials) demonstrates that both strains should favor adhesion to fibronectin films in a high ionic strength environment as compared to in a low ionic strength environment, where electrostatic repulsion between equally charged surfaces is dominant. Adhesion of S. intermedius to fibronectin films in a parallel plate flow chamber was completely in line with this modeling, while in addition atomic force microscopy (AFM) indicated stronger adhesion forces upon retraction between fibronectin-coated tips and the cell surfaces in high ionic strength PBS than in low ionic strength PBS. Thus, the dependence of the interaction on ionic strength is dominated by the overall negative charge on the interacting surfaces. Adhesion of S. mutans to fibronectin films, however, was completely at odds with theoretical modeling, and the strain adhered best in low ionic strength PBS. Moreover, AFM indicated weaker repulsive forces upon approach between fibronectin-coated tips and the cell surfaces in low ionic strength PBS than in high ionic strength PBS. This indicated that the dependence of the interaction on ionic strength is dominated by electrostatic attraction between oppositely charged, localized domains on the interacting surfaces, despite their overall negative charge. In summary, this study shows that physicochemical modeling of bacterial adhesion to protein-coated surfaces is only valid provided the number of specific interaction sites on the cell surfaces is low, such as on S. intermedius NCTC11324. Nonspecific interactions are dominated by specific interactions if the number of specific interaction sites is large, such as on S. mutans LT11. Its ionic strength dependence indicates that the specific interaction is electrostatic in nature and operative between oppositely charged domains on the interacting surfaces, despite the generally overall negatively charged character of the surfaces.     

Synthetic polymer nanoparticle-polysaccharide interactions: a systematic study

The interaction between synthetic polymer nanoparticles (NPs) and biomacromolecules (e.g., proteins, lipids, and polysaccharides) can profoundly influence the NPs fate and function. Polysaccharides (e.g., heparin/heparin sulfate) are a key component of cell surfaces and the extracelluar matrix and play critical roles in many biological processes. We report a systematic investigation of the interaction between synthetic polymer nanoparticles and polysaccharides by ITC, SPR, and an anticoagulant assay to provide guidelines to engineer nanoparticles for biomedical applications. The interaction between acrylamide nanoparticles (~30 nm) and heparin is mainly enthalpy driven with submicromolar affinity. Hydrogen bonding, ionic interactions, and dehydration of polar groups are identified to be key contributions to the affinity. It has been found that high charge density and cross-linking of the NP can contribute to high affinity. The affinity and binding capacity of heparin can be significantly diminished by an increase in salt concentration while only slightly decreased with an increase of temperature. A striking difference in binding thermodynamics has been observed when the main component of a polymer nanoparticle is changed from acrylamide (enthalpy driven) to N-isopropylacryalmide (entropy driven). This change in thermodynamics leads to different responses of these two types of polymer NPs to salt concentration and temperature. Select synthetic polymer nanoparticles have also been shown to inhibit protein-heparin interactions and thus offer the potential for therapeutic applications.     

Surface characterization of poly(methyl methacrylate-co-n-butyl acrylate-co-cyclopentylstyryl-polyhedral oligomeric silsesquioxane) by inverse gas chromatography

The surface properties of poly(methyl methacrylate-co-n-butyl acrylate-co-cyclopentylstyryl polyhedral oligomeric silsesquioxane) (poly(MMA-co-BA-co-styryl-POSS)) were studied by means of inverse gas chromatography (IGC) using 10 non-polar and polar solvents as the probes. Thermodynamic parameters of adsorption, e.g., specific retention volume, the dispersive component of the surface free energy, the specific interaction contribution to the free energy of adsorption and the acid/base constants were obtained to investigate the interactions between the surfaces of the copolymers and different solvents. It was found that incorporation of styryl-POSS into polymer resulted in increasing interactions between polymers and solvents, dispersive component of surface free energy of polymer and acidity of the surfaces of the polymers. The more the styryl-POSS were embedded, the stronger the interaction between the polymer surface and solvent, the dispersive component of the surface free energy and the acidity of the polymer surface were.     

Theoretical analysis of factors affecting the formation and stability of multilayered colloidal dispersions

A mathematical analysis of the major factors influencing the formation and stability of colloidal dispersions containing spherical particles surrounded by multilayered polymeric interfacial membranes formed by the layer-by-layer electrostatic deposition technique is carried out. The mathematical model assumes that (i) the colloidal dispersion initially consists of a mixture of electrically charged monodisperse spherical particles and oppositely charged polymer molecules, (ii) the adsorption of polymer molecules to the particle surfaces is diffusion-limited, and (iii) the dominant particle-particle collision mechanism is Brownian motion. This approach was used to produce stability maps that highlight conditions under which bridging flocculation, multilayer formation, or depletion flocculation occurs. The stability maps are derived from calculations of the critical polymer concentrations required to (i) saturate the particle surfaces (C(Sat)), (ii) ensure that polymer adsorption is faster than particle collisions (C(Ads)), and (iii) promote depletion flocculation (C(Dep)). In addition, the influence of interfacial properties on the stability of multilayer colloidal dispersions was assessed by calculating the colloidal interactions between the coated particles (i.e., van der Waals, electrostatic, steric, and depletion). These calculations indicated that the major factors are the interfacial charge and composition rather than the interfacial thickness. This article provides useful insights into the factors affecting the formation of stable multilayer colloidal dispersions.     

Communication: lateral phase separation of mixed polymer brushes physisorbed on planar substrates

Here, we present a new method to model lateral phase separation in mixed polymer brushes physisorbed to a planar surface with mobile grafting points. The model is based on a local mean field theory that combines a Flory-Huggins approximation for interaction enthalpies with an Alexander-de Gennes brush entropy contribution. Using Monte Carlo sampling, the application of these two interactions to a lattice model yields a range of phase behavior consistent with previous theoretical and experimental work. This model will be useful for predicting mixed polymer brush morphologies on planar surfaces and in principle can be extended to other geometries (e.g., spheres) and polymer systems.     

Proteins and polyelectrolytes: A charged relationship

We review the interaction of charged polymeric systems with proteins. In solutions of low ionic strength there are many examples of proteins attracted to polyelectrolytes even if both systems carry the same overall charge. This attractive interaction is widespread, having been observed for single polyelectrolyte chains as well as for polyelectrolytes grafted to surfaces (polyelectrolyte brushes) and charged polymeric networks. In all cases, adding salt weakens the interaction considerably. We discuss the suggestion that the attractive force at low salinity originates from the asymmetry of interaction between charged polymer segments and charged patches on the surface of the protein globule. This can be explained if the attractive force is mainly due to a counterion release force, i.e., the polyelectrolyte chains become the multivalent counterions for the patches of opposite charge localized on the surface of the proteins. We review a selection of simple models that lead to semi-quantitative estimates of this force as the function of salt concentration.     

Low-temperature studies of encapsulated proteins

Water-soluble proteins encapsulated within reverse micelles may be studied under a variety of conditions, including low temperature and a wide range of buffer conditions. Direct high-resolution detection of information relating to protein folding intermediates and pathways can be monitored by low-temperature solution NMR. Ubiquitin encapsulated within AOT reverse micelles was studied using multidimensional multinuclear solution NMR to determine the relationship between protein structure, temperature, and ionic strength. Ubiquitin resonances were monitored by 15N HSQC NMR experiments at varying temperatures and salt concentrations. Our results indicate that the structure of the encapsulated protein at low temperature experiences perturbation arising from two major influences, which are reverse micelle-protein interactions and low-temperature effects (e.g., cold denaturation). These two effects are impossible to distinguish under conditions of low ionic strength. Elevated concentrations of nondenaturing salt solutions defeat the effects of reverse micelle-protein interactions and reveal low-temperature protein unfolding. High ionic strength shielding stabilizes the reverse micelle at low temperatures, which reduces the electrostatic interaction between the protein and reverse micelle surfaces, allowing the phenomenon of cold denaturation to be explored.     

Syntheses and Characterization of Conjugates of Nucleic Acid Probes and 6-Aminoglucose-based Polymers

Homopolymers based on 6-deoxy-6-methacryloylamido-d -glucopyranose (6-aminoglucose), obtained by radical-initiated polymerization, were used as reactive polymeric supports to tether oligodeoxyribonucleotides (ODNs) in order to make oligonucleotide–polymer conjugates of potential applications in diagnostics. The reducing ends of the homopolymers, used as self-protected groups during the radical polymerizations, served as reactive groups for the covalent attachment of 5′-amino-modified oligodeoxyribonucleotides via reductive amination, with sodium borohydride as a reducing agent. The best coupling conditions used dimethylformamide/20 mm sodium tetraborate as a 90/10 (v/v) mixture at 50°C. The main factors controlling the course of the reaction are electrostatic repulsive interactions and polymer chain complexation. A low ionic strength was essential for the reaction to occur in a pH range of 7.3 to 9.3. The polymer–ODN conjugates could be aggregated depending on the extent of polymer chain interactions. © 1997 John Wiley & Sons, Ltd.     

水溶液中制备分子印迹聚合物微球及其分子识别特性 研究

采用聚乙烯醇400作为分散剂,利用模板分子与功能单体/聚合物残基之间的离子键(静电)相互作用形成复合物,用水溶液微悬浮聚合法制备了4-氨基吡啶(4-AP)和甲氧苄氨嘧啶(TMP)分子印迹聚合物微球,并通过色谱行为表征,比较了它们对各自的模板分子作用的强弱。结果表明,采用甲基丙烯酸为功能单体制备的分子印迹聚合物微球(MIMs),对带有氨基的模板分子主要靠离子键(静电)相互作用,且作用力的大小与氨基的个数有关,色谱研究表明,模板分子中氨基数目越多,这种作用越强,而且这种作用不是简单的加合,而是协同增强作用。     

Interaction of similarly charged surfaces mediated by nanoparticles

We study the interaction between two like charged surfaces embedded in a solution of oppositely charged multivalent rod-like counterions.The counterions consist of two rigidly bonded point charges,each of valency Z.The strength of the electrostatic coupling increases with increasing surface charge density or valency of the charges.The system is analyzed by employing a self-consistent field theory,which treats the short and long range interactions of the counterions within different approximations.We find that in the weak coupling limit,the interactions are only repulsive.In the intermediate coupling regime,the multivalent rod-like counterions can mediate attractive interactions between the surfaces. For sufficiently long rods,bridging contributes to the attractive interaction.In the strong coupling limit,the charge correlations can contribute to the attractive interactions at short separations between the charged surfaces.Two minima can then appear in the force curve between surfaces.     

Adsorption of monoclonal IgG on polystyrene microspheres

In this paper the adsorption of a monoclonal antibody IgG-1 isotype against HBsAg onto positively and negatively charged polystyrene beads has been studied. To determine the role played by electrostatic forces in the adsorption process different pH values were used. It was confirmed that the affinity of adsorption isotherms depends on the electrostatic interaction between protein and polymer surface. The maximum adsorption amount is located around the i.e.p. of the dissolved protein, and decreases markedly as pH moves away. Thus, the major driving force for adsorption of monoclonal antibodies on polystyrene beads comes from the hydrophobic interaction between the antibody molecules and the adsorbent surface. Desorption of preadsorbed IgG molecules by increasing ionic strength has shown that the positively charged polystyrene is also more hydrophobic in character than the negatively charged one. Finally, electrokinetic experiments have determined that the electric double layer (e.d.l.) of monoclonal antibody changes as the consequence of adsorbing on charged polymer surfaces.     

A modeling approach to describe the adhesion of rough, asymmetric particles to surfaces

A combined theoretical and experimental study of the adhesion of alumina particles and polystyrene latex spheres to silicon dioxide surfaces was performed. A boundary element technique was used to model electrostatic interactions between micron-scale particles and planar surfaces when the particles and surfaces were in contact. This method allows quantitative evaluation of the effects of particle geometry and surface roughness on the electrostatic interaction. The electrostatic interactions are combined with a previously developed model for van der Waals forces in particle adhesion. The combined model accounts for the effects of particle and substrate geometry, surface roughness and asperity deformation on the adhesion force. Predictions from the combined model are compared with experimental measurements made with an atomic force microscope. Measurements are made in aqueous solutions of varying ionic strength and solution pH. While van der Waals forces are generally dominant when particles are in contact with surfaces, results obtained here indicate that electrostatic interactions contribute to the overall adhesion force in certain cases. Specifically, alumina particles with complex geometries were found to adhere to surfaces due to both electrostatic and van der Waals interactions, while polystyrene latex spheres were not affected by electrostatic forces when in contact with various surfaces.     

Adsorption of Polyelectrolyte-Nanoparticle Systems on Silica: Influence on Interaction Forces

In this work, we have studied the interfacial properties of cationic polyelectrolyte (PE) and silica nanoparticle (NP) systems at macroscopic silica surfaces by means of ellipsometry. The influence of adsorbed layers on the interactions between silica surfaces was also investigated using the bimorph surface force apparatus. Added nanoparticles were observed to strongly swell the interfacial polyelectrolyte layers, an effect partly related to neutralization of charged polyelectrolyte groups. The effect was more pronounced for low charged than for highly charged polyelectrolytes. Overall, the presence of nanoparticles seemed to increase the repulsive interaction measured between silica surfaces. The force measured on approach was long range and quite strongly repulsive. On separation, an attractive bridging interaction was measured for polyelectrolyte-covered surfaces. For the low charged polyelectrolyte used in the study, the force turned repulsive on addition of nanoparticles. For the highly charged polyelectrolyte used, a change from a very strong attraction (involving a jump of the surfaces out of contact) to a very long-range elastic attractive force was observed on adding nanoparticles. The long-range elastic force indicates that polymer chains and nanoparticles form a transient network in the gap between the surfaces. The observed difference in the outward force curves may explain why the addition of nanoparticles appears to improve, e.g., shear-resistance and reflocculation characteristics of polymeric flocculants. Copyright 2000 Academic Press.     

Interactions between protein coated particles and polymer surfaces studied with the rotating particles probe

Nonspecific interactions between proteins and polymer surfaces have to be minimized in order to control the performance of biosensors based on immunoassays with particle labels. In this paper we investigate these nonspecific interactions by analyzing the response of protein coated magnetic particles to a rotating magnetic field while the particles are in nanometer vicinity to a polymer surface. We use the fraction of nonrotating (bound) particles as a probe for the interaction between the particles and the surface. As a model system, we study the interaction of myoglobin coated particles with oxidized polystyrene surfaces. We measure the interaction as a function of the ionic strength of the solution, varying the oxidation time of the polystyrene and the pH of the solution. To describe the data we propose a model in which particles bind to the polymer by crossing an energy barrier. The height of this barrier depends on the ionic strength of the solution and two interaction parameters. The fraction of nonrotating particles as a function of ionic strength shows a characteristic shape that can be explained with a normal distribution of energy barrier heights. This method to determine interaction parameters paves the way for further studies to quantify the roles of protein coated particles and polymers in their mutual nonspecific interactions in different matrixes.     

Particle adsorption and deposition: role of electrostatic interactions

This work demonstrates how electrostatic interactions, described in terms of the classical DLVO theory, influence colloid particle deposition phenomena at solid/liquid interfaces. Electrostatic interactions governing particle adsorption in both non-polar and polar media (screened interactions) are discussed. Exact and approximate methods for calculating the interaction energy of spherical and non-spherical (anisotropic) particles are presented, including the Derjaguin method. Phenomenological transport equations governing particle deposition under the linear regime are discussed with the limiting analytical expressions for calculating initial flux. Non-linear adsorption regimes appearing for higher coverage of adsorbed particles are analysed. Various theoretical approaches are exposed, aimed at calculating blocking effects appearing due to the presence of adsorbed particles. The significant role of coupling between bulk transport and surface blocking is demonstrated. Experimental data obtained under well-defined transport conditions, such as diffusion and forced convection (impinging-jet cells), are reviewed. Various experimental techniques for detecting particles at interfaces are discussed, such as reflectometry, ellipsometry, streaming potential, atomic force microscopy, electron and optical microscopy, etc. The influence of ionic strength and flow rate on the initial particle deposition rate (limiting flux) is presented. The essential role of electrostatic interactions in particle deposition on heterogeneous surfaces is demonstrated. Experimental data pertinent to the high-coverage adsorption regime are also presented, especially the dependence of the maximum coverage of particles and proteins on the ionic strength. The influence of lateral electrostatic interactions on the structure of particle monolayers is elucidated, and the links between colloid and molecular systems are pointed out.     

Adsorption of ionic surfactants in particulate systems: flotation,stability, and interaction forces

The flotation efficiency of silica particles using the ionic surfactants, sodium dodecylbenzenesulfonate (SDbS) and cetyltrimethylammonium bromide (CPB), have been investigated. Results from adsorption, electrophoretic mobility, dispersion stability and direct interaction force measurements are used to develop an understanding of the role of ionic surfactants in particulate flotation. Adsorption and mobility data indicate that SDbS adsorbs at the silica/solution interface, though without improving the flotation efficiency. CPB was found to adsorb on the silica particles as a result of electrostatic interaction; initially to neutralize the surface charge and destabilize the suspension, and at higher surfactant concentrations, to reverse the particle charge and re-stabilize the suspension. Direct force measurements in the presence of CPB confirm that the electrostatic interactions between approaching surfaces are neutralized at low CPB concentrations. Additionally, evidence for a strong adhesive interaction after contact is seen. At higher concentrations, the surfaces begin to recharge, and the adhesive interaction decreases in magnitude. The flotation efficiency was found to correlate well with the measured particle interactions, and to be a function of the particulate electrophoretic mobility.     

Polyelectrolyte gel transitions: experimental aspects of charge inhomogeneity in the swelling and segmental attractions in the shrinking

This paper aims to provide a systematic discussion based on our experimental results both previously published and unpublished, to promote better understanding of volume-phase transitions in polyelectrolyte gels. Special attention was paid to the distribution of network charges as well as to the attractive interaction among polymer segments. From looking at how these effects appear in the swelling curves, an exploration of the nature of polyelectrolyte gel transitions was attempted. Two sorts of polyelectrolyte gels, temperature-responsive ionic gels based on N-isopropylacrylamide (NIPA) and cationic poly(ethyleneimine) (PEI) gels, were mainly employed with various modifications. The charge inhomogeneity within the gel phase was created by surfactant binding, immobilized enzyme reaction and physical entrapment of polyions. The attractive interactions holding the gel in a collapsed state were studied in comparison with phase separations of the corresponding linear polyelectrolyte. The main conclusions are summarized as follows: (i) The charge inhomogeneity exhibits a large influence on the volume transition in ionic gels. (ii) Hydrogen bonding and hydrophobic association, other than electrostatic attraction, can be considered to play an important role in the segmental association. (iii) Stably associated segments via one or more of these attractive interactions causes a large hysteresis in the swelling process, in which the repulsive interaction among the fixed charges on the network is dominant as shown in the Katchalsky's model. (iv) A distribution of "neutral but hydrophilic" moieties (e.g., ion pair or salt-linkage formed between the opposite charged groups) within the gel shows a marked effect on the temperature-induced volume collapse, the aspect of which is similar to that observed in the gels with a charge inhomogeneity.     

Direct surface force measurements of polyelectrolyte multilayer films containing nanocrystalline cellulose

Polyelectrolyte multilayer films containing nanocrystalline cellulose (NCC) and poly(allylamine hydrochloride) (PAH) make up a new class of nanostructured composite with applications ranging from coatings to biomedical devices. Moreover, these materials are amenable to surface force studies using colloid-probe atomic force microscopy (CP-AFM). For electrostatically assembled films with either NCC or PAH as the outermost layer, surface morphology was investigated by AFM and wettability was examined by contact angle measurements. By varying the surrounding ionic strength and pH, the relative contributions from electrostatic, van der Waals, steric, and polymer bridging interactions were evaluated. The ionic cross-linking in these films rendered them stable under all solution conditions studied although swelling at low pH and high ionic strength was inferred. The underlying polymer layer in the multilayered film was found to dictate the dominant surface forces when polymer migration and chain extension were facilitated. The precontact normal forces between a silica probe and an NCC-capped multilayer film were monotonically repulsive at pH values where the material surfaces were similarly and fully charged. In contrast, at pH 3.5, the anionic surfaces were weakly charged but the underlying layer of cationic PAH was fully charged and attractive forces dominated due to polymer bridging from extended PAH chains. The interaction with an anionic carboxylic acid probe showed similar behavior to the silica probe; however, for a cationic amine probe with an anionic NCC-capped film, electrostatic double-layer attraction at low pH, and electrostatic double-layer repulsion at high pH, were observed. Finally, the effect of the capping layer was studied with an anionic probe, which indicated that NCC-capped films exhibited purely repulsive forces which were larger in magnitude than the combination of electrostatic double-layer attraction and steric repulsion, measured for PAH-capped films. Wherever possible, DLVO theory was used to fit the measured surface forces and apparent surface potentials and surface charge densities were calculated.     

Electrostatic surface interactions in mixtures of symmetric and asymmetric electrolytes: a Monte Carlo study

Canonical Monte Carlo simulations of the interaction between a uniformly charged spherical particle and a discretely charged planar surface in solutions of symmetric and asymmetric electrolytes were performed. To assess the nature of the interactions, the force exerted on the colloidal particle perpendicular to the planar surface was calculated. Attractive minima in the interaction force between the similarly charged surfaces reveal the occurrence of two phenomena: long-range attraction of electrostatic origin and short-range attraction due to depletion effects. The degree of electrostatic coupling determines the magnitude and range of like-charge attraction between the two surfaces.     

Influence of natural organic matter on the deposition kinetics of extracellular polymeric substances (EPS) on silica

The influence of humic acid and alginate, two major components of natural organic matter (NOM), on deposition kinetics of extracellular polymeric substances (EPS) on silica was examined in both NaCl and CaCl(2) solutions over a wide range of environmentally relevant ionic strengths utilizing a quartz crystal microbalance with dissipation. Deposition kinetics of both soluble EPS and bound EPS extracted from four bacterial strains with different characteristics was investigated. EPS deposition on humic acid-coated silica surfaces was found to be much lower than that on bare silica surfaces under all examined conditions. In contrast, pre-coating the silica surfaces with alginate enhanced EPS deposition in both NaCl and CaCl(2) solutions. More repulsive electrostatic interaction between EPS and surface contributed to the reduced EPS deposition on humic acid-coated silica surface. The trapping effect induced by the rough alginate layer resulted in the greater EPS deposition on alginate-coated surfaces in NaCl solutions, whereas surface heterogeneities on alginate layer facilitated favorable interactions with EPS in CaCl(2) solutions. The presence of dissolved background humic acid and alginate in solutions both significantly retarded EPS deposition on silica surfaces due to the greater steric and electrostatics repulsion.