Self-assembly of Acridine Orange into H-aggregates at the air/water interface: tuning of orientation of headgroup

The surface active derivative of the organic dye Acridine Orange (N-10-dodecyl-acridine orange (DAO)) has been included in mixed Langmuir monolayers with stearic acid (SA). The maximum relative content on DAO for a stable mixed monolayer is a molar ratio of X(DAO) = 0.5. Brewster angle microscopy (BAM) reveals a high homogeneity at the micrometer level for the mixed monolayer in equimolar proportion (X(DAO) = 0.5), whereas the appearance of domains occurs for lower content of DAO, i.e., X(DAO) = 0.2 and 0.1. The aggregation of the DAO headgroup leads to well-defined H-aggregates at the air/water interface for those mixed monolayers with a low content of DAO. However, for the mixed monolayers enriched in DAO, e.g., X(DAO) = 0.5, the molecular crowding prevents the formation of defined supramolecular structures. Molecular organization and tilting of the DAO headgroup is quantitatively analyzed by in situ UV-visible reflection spectroscopy. The formation of H-aggregates of the DAO headgroup can be reversibly tuned with the applied surface pressure. A molecular mechanism for the conformational rearrangement of the DAO molecule is proposed using RM1 quantum semiempirical calculations.     

The controlling effect of pH on oxidation of Cr(III) by manganese oxide minerals

Effects of the subphase temperature on the surface pressure (pi)-area (A) isotherms of mixed monolayers of miltefosine (hexadecylphosphocholine), a potential anticancer drug, and cholesterol were investigated at the air/water interface, which were supplemented with Brewster angle microscopy (BAM) observations. Comparison of the collapse pressure values, mean molecular areas, excess areas and excess free energy of mixing between the mixed monolayer at various molar ratios and the pure component monolayers showed that, regardless of the subphase temperature, the investigated miltefosine-cholesterol system is much more stable than that the pure component monolayers, suggesting strong attractive interactions between miltefosine and cholesterol in mixed monolayers. As a consequence, it was postulated that stable "complexes" of the two components could form at the interface, for which stoichiometry may vary with the subphase temperature. Such "surface complexes" should be responsible for the contraction of the mean molecular area and thus the high stability of the mixed monolayer.     

Monoglycerides and beta-lactoglobulin adsorbed films at the air-water interface. structure, microscopic imaging, and shear characteristics

In this work we have analyzed the structural, topographical, and shear characteristics of mixed monolayers formed by adsorbed beta-lactoglobulin (beta-lg) and spread monoglyceride (monopalmitin or monoolein) on a previously adsorbed protein film. Measurements of the surface pressure (pi)-area (A) isotherm, Brewster angle microscopy (BAM), and surface shear characteristics were obtained at 20 degrees C and at pH 7 in a modified Wilhelmy-type film balance. The pi-A isotherm and BAM images deduced for adsorbed beta-lactoglobulin-monoglyceride mixed films at pi lower than the equilibrium surface pressure of beta-lactoglobulin (pi(e)(beta-lg)) indicate that beta-lactoglobulin and monoglyceride coexist at the interface. However, the interactions between protein and monoglyceride are somewhat weak. At higher surface pressures (at pi > or = pi(e)(beta-lg)) a protein displacement by the monoglyceride from the interface takes place. The surface shear viscosity (eta(s)) of mixed films is very sensitive to protein-monoglyceride interactions and displacement as a function of monolayer composition (protein/monoglyceride fraction) and surface pressure. Shear can induce change in the morphology of monoglyceride and beta-lactoglobulin domains, on the one hand, and segregation between domains of the film-forming components on the other hand. In addition, the displacement of beta-lactoglobulin by the monoglycerides is facilitated under shear conditions.     

A monolayer study on interactions of docetaxel with model lipid membranes

Docetaxel (DCT) is an antineoplastic drug for the treatment of a wide spectrum of cancers. DCT surface properties as well as miscibility studies with l-alpha-dipalmitoyl phosphatidylcholine (DPPC), which constitutes the main component of biological membranes, are comprehensively described in this contribution. Penetration studies have revealed that when DCT is injected under DPPC monolayers compressed to different surface pressures, it penetrates into the lipid monolayer promoting an increase in the surface pressure. DCT is a surface active molecule able to decrease the surface tension of water and to form insoluble films when spread on aqueous subphases. The maximum surface pressure reached after compression of a DCT Langmuir film was 13 mN/m. Miscibility of DPPC and DCT in Langmuir films has been studied by means of thermodynamic properties as well as by Brewster angle microscopy (BAM) analysis of the mixed films at the air-water interface, concluding that DPPC and DCT are miscible and they form non-ideally mixed monolayers at the air-water interface. Helmholtz energies of mixing revealed that no phase separation occurs. In addition, Helmholtz energies of mixing become more negative with decreasing areas per molecule, which suggests that the stability of the mixed monolayers increases as the monolayers become more condensed. Compressibility values together with BAM images indicate that DCT has a fluidizing effect on DPPC monolayers.     

Langmuir monolayer behavior of an ion pair amphiphile with a double-tailed cationic surfactant

The spread or Langmuir monolayer behavior of an ion pair amphiphile (IPA), hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), with a double-tailed cationic surfactant, dihexadecyldimethylammonium bromide (DHDAB), at the air/water interface was analyzed with surface pressure-area isotherms, area relaxation curves, and Brewster angle microscope (BAM) images. The surface pressure-area isotherms showed that with increasing the DHDAB molar ratio, X(DHDAB), spread monolayers of HTMA-DS with DHDAB became rigid. In addition, unreasonably small limiting areas per alkyl chain of the molecules in the monolayers were found, especially at X(DHDAB)=0.5, implying the molecular loss from the monolayers at the interface. For spread HTMA-DS/DHDAB monolayers at the interface, a new IPA, DHDA-DS, was proposed to form through the displacement of HTMA(+) from HTMA-DS by DHDA(+), leaving HTMA(+) dissociated. The formation of DHDA-DS and the desorption of dissociated HTMA(+) upon the interface compression were supported by the results obtained from designed monolayer experiments with BAM observations, and were discussed by considering the hydrophilicity, packing efficiency, and headgroup charge characteristic of the species. Moreover, the area relaxation curves of spread HTMA-DS/DHDAB monolayers suggested that the formation of DHDA-DS was strongly related to the improved monolayer stability at the interface, which may have implications for the DHDAB-enhanced physical stability of catanionic vesicles composed of HTMA-DS.     

Miscibility of gramicidin A-ethyl nonadecanoate in langmuir monolayers in the presence of salts dissolved in the subphase

The behavior of binary mixed Langmuir monolayers from gramicidin A (GA) and ethyl nonadecanoate (EN), spread on aqueous subphases containing NaCl and CaCl2, was investigated on the basis of the analysis of surface pressure-average area per molecule (pi-A) isotherms complemented with Brewster angle microscopy (BAM) images. Compression modulus versus surface pressure (C(S-1)-pi) curves indicate the existence of interactions in the GA-EN mixed monolayers at low surface pressures (below 5 mN m(-1)). However, for mixtures in which the ester is the predominant component, both GA and EN are miscible within regions from fully expanded to collapse. To examine the interactions between both components in the studied system, values of the mean molecular area per molecule (A12) were plotted as a function of molar fraction of gramicidin A (X(GA)). A12-X(GA) plots exhibit negative deviations from ideality at high surface pressures, wherein beta-helices of GA are vertically oriented in respect to the interface. However, at surface pressures below the plateau transition, which is due to reorientation of GA, the binary system obeys the additive rule. Brewster angle microscopy (BAM) was applied for a direct visualization of the monolayers morphologies. The obtained images prove that for molar ratios of GA > or = 0.3 and at surface pressures above 5 mN m(-1), both components are immiscible at the interface. The observed negative deviations from the additively rule were attributed to the formation of a three-dimensional phase in the mixed film, which provokes its contraction at the interface.     

Molecular organization and effective energy transfer in iridium metallosurfactant-porphyrin assemblies embedded in Langmuir-Schaefer films

Mixed Langmuir monolayers and Langmuir-Schaefer (LS) films containing the cationic metallosurfactant bis(2-phenylpyridine)(4,4'-diheptadecyl-2,2'-bipyridine)-iridium(III) chloride (Ir-complex) and the anionic tetrakis(4-sulfonatophenyl)porphyrin (TSPP) in 4:1 molar ratio have been successfully prepared by the co-spreading method at the air-water interface. The presence of both luminescent species at the interface, as well as the organization of the TSPP underneath the Ir-complex matrix in Langmuir and LS films, is inferred by surface techniques such as π-A isotherms, reflection spectroscopy, Brewster angle microscopy (BAM) and UV-visible absorption spectroscopy. A red-shift in the absorption band of the porphyrin under the compression of the mixed monolayer suggests the J-aggregation of the TSPP under the Ir-complex matrix. To date, this is the first report of Langmuir and/or LS films containing these two types of species together. Furthermore, the intermolecular energy transfer between Ir-complex and TSPP molecules in solution and in transferred mixed films is investigated through steady-state fluorescence and lifetime measurements. These results indicate that effective intermolecular energy transfer occurs from the Ir-complex to the TSPP molecules in LS films. The influence of the spatial proximity of donor and acceptor molecules has been studied by the insertion of lipid interlayers among them.     

Adsorption of detergent-solubilized and phospholipase C-solubilized alkaline phosphatase at air/liquid interfaces

To investigate the influence of a hydrophobic anchor on protein adsorption, equilibrium and dynamic aspects of the adsorption of two different solubilized forms of rat osseous plate alkaline phosphatase on Langmuir monolayers of dimyristoylphosphatidic acid (DMPA) were studied. Surface pressure and surface potential measurements at air/liquid interfaces were carried out using the detergent-solubilized form (DSAP) of alkaline phosphatase, which holds a glycosylphosphatidylinositol (GPI) hydrophobic anchor, and the glycosylphosphatidylinositol-specific phospholipase C-solubilized form (PLSAP), lacking the GPI anchor. Similar surface transitions observed for both DMPA and DMPA/PLSAP mixed monolayers indicate that the presence of PLSAP does not promote significant changes in surface packing of the DMPA monolayer. However, PLSAP interacts with the polar portion of the phospholipid even at high lateral compression. The presence of the GPI anchor increases the adsorption of DSAP at a plain air/liquid interface and also enables the penetration of the protein into the DMPA monolayers. The penetration is dependent on both time and surface pressure. Up to 20 mN/m, the surface pressure increases smoothly indicating a diffusion followed by an adsorption process. Above 20 mN/m, after a fast increase, the surface pressure slowly decays to equilibrium values quite close to the initial surface pressures. The results indicate that the molecular packing of the lipid layer drives the enzyme adsorption to the interface either through the GPI anchor or by the polypeptide moiety.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Relaxation behaviors of monolayers of octadecylamine and stearic acid at the air/water interface

This study investigated the relaxation behaviors of octadecylamine (ODA), stearic acid (SA), and SA/ODA mixed monolayers at the air/water interface. Area relaxations of monolayers at constant surface pressure were studied by a nucleation and growth mechanism and by direct observation using a Brewster angle microscope (BAM). The results showed that ODA and SA monolayers exhibit different characteristics in the area loss and in the BAM morphology. In the initial relaxation stage, SA monolayer illustrates a more stable characteristic than ODA. But at the later stage, the area loss of SA monolayer increases more quickly than that for ODA due to significant nucleation and growth of 3D aggregates. The BAM results demonstrated that 3D aggregates of large scale domains are likely to form on a SA monolayer even when the area loss is insignificant. On the contrary, only dotlike aggregates of low density were found on the ODA monolayer when relaxation is carried out at higher surface pressure. The relaxation behavior of SA monolayer can be described by the Vollhardt model. However, the relaxation of ODA monolayer does not follow the nucleation model described by Vollhard but can reasonably be attributed to the effect of dissolution. For the SA/ODA mixed monolayers, the relaxation behaviors in the initial and final stages follow different mechanisms, which is attributed to the formation of distinct phases as observed from the BAM. This result also implied that SA and ODA are not completely miscible to be a homogeneous phase. Phases of various compositions were formed in the mixed monolayers, and thus, the relaxation mechanism was shifted during the relaxation process as dominated by different relaxation behaviors of various phases.     

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

The production and verification of pristine semi-fluorinated thiol monolayers on gold

In this work the interaction between human serum albumin (HSA) and a monofluorinated phospholipid, 1-palmitoyl-2-[16-fluoropalmitoyl-phosphatidylcholine] (F-DPPC), was studied by using Langmuir monolayer and Brewster angle microscopy (BAM) techniques. Different amounts of F-DPPC were spread on a previously formed HSA monolayer located at the air/water interface at 25 °C and the mixed monolayers thus obtained showed the existence of a liquid expanded-liquid condensed (LE-LC) phase transition (at 14 mN/m), attributed to the pure F-DPPC monolayer, coexisting with a second transition (at 22-24 mN/m) corresponding to the protein conformational change from an unfolded state to another in “loops” configuration. Relative thickness measurements recorded during the compression of the mixed monolayers showed the existence of an “exclusion” surface pressure (π_exc), above which the protein is squeezed out the interface, but not totally. BAM images reveal that some protein molecules in a packed “loops” configuration remain at the interface at surface pressures higher than the “exclusion” surface pressure. The application of the Defay-Crisp phase rule to the phase diagram of the F-DPPC/HSA system can explain the existence of certain regions of surface pressure in which the mixed monolayer components are miscible, as well as those others that they are immiscible.     

Rat osseous plate alkaline phosphatase as Langmuir monolayer--an infrared study at the air-water interface

A glycosylphosphatidylinositol (GPI)-anchored enzyme (rat osseous plate alkaline phosphatase-OAP) was studied as monolayer (pure and mixed with lipids) at the air-water interface. Surface pressure and surface potential-area isotherms showed that the enzyme forms a stable monolayer and exhibits a liquid-expanded state even at surface pressure as high as 30 mN m(-1). Isotherms for mixed dimyristoylphosphatidic acid (DMPA)-OAP monolayer showed the absence of a liquid-expanded/liquid-condensed phase transition as observed for pure DMPA monolayer. In both cases, pure or mixed monolayer, the enzyme preserves its native conformation under compression at the air-water interface as observed from in situ p-polarized light Fourier transform-infrared reflection-absorption spectroscopic (FT-IRRAS) measurements. Changes in orientation and conformation of the enzyme due to the presence or absence of DMPA, as well as due to the surface compression, are discussed.     

Incorporation and exclusion of long chain alkyl halides in fatty acid monolayers at the air-water interface

Mixed monolayers of deuterated palmitic acid C(15)D(31)COOH (dPA) and deuterated stearic acid C(17)D(35)COOH (dSA) with 1-bromoalkanes of different alkyl chain length (C(4) to C(16)) at the air-water interface were investigated. Alkanes and 1-chlorohexadecane ClC(16)H(33) (ClHex) were also studied to compare the effects of the halogen on the mixed monolayers. Surface pressure-area isotherms and Brewster angle microscopy (BAM) were used to obtain the organization and phase behavior, providing a macroscopic view of the mixed monolayers. A molecular-level understanding of the interfacial molecular organization and intermolecular interactions was obtained by using vibrational sum frequency generation (SFG) spectroscopy and infrared reflection-absorption spectroscopy (IRRAS). It was found that from the alkyl halide molecules investigated 1-bromopentadecane, BrC(15)H(31) (BrPent), 1-bromohexadecane, BrC(16)H(33) (BrHex), and ClHex incorporate into the fatty acid monolayers. Alkanes of 15- and 16-carbon chain length do not incorporate into the fatty acid monolayer, which suggests that the halogen is needed for incorporation. Isotherms and spectra suggest that BrHex molecules are squeezed out, or excluded, from the fatty acid monolayer as the surface pressure is increased, while BAM images confirm this. Additionally, SFG spectra reveal that the alkyl chains of both fatty acids (dPA and dSA) retain an all-trans conformation after the incorporation of alkyl halide molecules. BAM images show that at low surface pressures BrHex does not affect the two-dimensional morphology of the dPA and dSA domains and that BrHex is miscible with dPA and dSA. We also present for the first time BAM images of BrHex deposited on a water surface, which reveal the formation of aggregates while the surface pressure remains unchanged from that of neat water.     

Structural and topographical characteristics of dipalmitoyl phosphatidic acid in Langmuir monolayers

Dipalmitoyl phosphatidic acid (DPPA) monolayers at the air-water interface were studied from surface pressure (Pi)-area (A) isotherms and at the microscopic level with Brewster angle microscopy (BAM) under different conditions of temperature, pH, and ionic strength. BAM images were recorded simultaneously with Pi-A isotherms during the monolayer compression-expansion cycles. DPPA monolayers show a structural polymorphism from the liquid-expanded (LE)-liquid-condensed (LC) transition region at lower surface pressures toward liquid-condensed and solid (S) structures at higher surface pressures. An increase in temperature, pH, or ionic strength provokes an expansion in the monolayer structure. The results obtained from the Pi-A measurements are confirmed by the monolayer topography and relative reflectivity. The measurements of relative reflectivity upon monolayer compression showed an increase in relative monolayer thickness of 1.25 and 3.3 times throughout the full monolayer compression from the liquid-expanded to the liquid-condensed and solid states, respectively.     

Effects of cholesterol component on molecular interactions between paclitaxel and phospholipid within the lipid monolayer at the air-water interface

Cholesterol is a main component of the cell membrane and could have significant effects on drug-cell membrane interactions and thus the therapeutic efficacy of the drug. It also plays an important role in liposomal formulation of drugs for controlled and targeted delivery. In this research, Langmuir film technique, atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR) are employed for a systematic investigation on the effects of cholesterol component on the molecular interactions between a prototype antineoplastic drug (paclitaxel) and 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) within the cell membrane by using the lipid monolayer at the air-water interface as a model of the lipid bilayer membrane and the biological cell membrane. Analysis of the measured surface pressure (pi) versus molecular area (a) isotherms of the mixed DPPC/paclitaxel/cholesterol monolayers at various molar ratios shows that DPPC, paclitaxel and cholesterol can form a non-ideal miscible system at the air-water interface. Cholesterol enhances the intermolecular forces between paclitaxel and DPPC, produces an area-condensing effect and thus makes the mixed monolayer more stable. Investigation of paclitaxel penetration into the mixed DPPC/cholesterol monolayer shows that the existence of cholesterol in the DPPC monolayer can considerably restrict the drug penetration into the monolayer, which may have clinical significance for diseases of high cholesterol. FTIR and AFM investigation on the mixed monolayer deposited on solid surface confirmed the obtained results.     

Interaction of the glycoalkaloid tomatine with DMPC and sterol monolayers studied by surface pressure measurements and Brewster angle microscopy

The interaction of the glycoalkaloid tomatine with monolayers of dimyristoylphosphatidylcholine (DMPC) and cholesterol, as well as other selected sterols, has been investigated using surface pressure measurements at constant area and Brewster angle microscopy (BAM). The interaction of tomatine with sterol monolayers is found to vary with the structure of the sterol. The interaction of tomatine with cholesterol-containing monolayers results in a surface pressure increase accompanied by the appearance of a mottled texture. Morphological changes are observed that suggest the formation of tomatine-cholesterol complexes that aggregate at the water-air interface. No morphology change observable by BAM is observed for monolayers containing epicholesterol, suggesting that the stereochemistry of hydrogen bonding between the sterol and the sugar units on tomatine is of particular significance. Strong interactions are observed with cholestanol- and coprostanol-containing monolayers, and BAM reveals formation of spiked aggregates upon interaction with 7:3 mole ratio DMPC/coprostanol mixed monolayers. More modest surface pressure changes are observed for cholestenone- and epicoprostanol-containing monolayers. A much smaller surface pressure increase is observed when tomatine is injected beneath a pure DMPC monolayer.     

Probing chitosan and phospholipid interactions using Langmuir and Langmuir-Blodgett films as cell membrane models

The interaction between chitosan and Langmuir and Langmuir-Blodgett (LB) films of dimyristoyl phosphatidic acid (DMPA) is investigated, with the films serving as simplified cell membrane models. At the air-water interface, chitosan modulates the structural properties of DMPA monolayers, causing expansion and decreasing the monolayer elasticity. As the surface pressure increased, some chitosan molecules remained at the interface, but others were expelled. Chitosan could be transferred onto solid supports alongside DMPA using the LB technique, as confirmed by infrared spectroscopy and quartz crystal microbalance measurements. The analysis of sum-frequency vibration spectroscopy data for the LB films combined with surface potential measurements for the monolayers pointed to chitosan inducing the ordering of the DMPA alkyl chains. Furthermore, the morphology of DMPA LB films, studied with atomic force microscopy, was affected significantly by the incorporation of chitosan, with the mixed chitosan-DMPA films displaying considerably higher thickness and roughness, in addition to chitosan aggregates. Because chitosan affected DMPA films even at pressures characteristic of cell membranes, we believe this study may help elucidate the role of chitosan in biological systems.     

Monolayer characteristics of mixed octadecylamine and stearic acid at the air/water interface

Mixed monolayers of stearic acid (SA) and octadecylamine (ODA) at the air/water interface were investigated in this article. The miscibility of the two compounds was evaluated by the measurement of surface pressure-area per molecule (pi-A) isothems and the direct observation of Brewster angle microscopy (BAM) on the water surface. The two compounds were spread individually on the subphase (method 1) or premixed first in the spreading solvent and then cospread (method 2). The effect of spreading method on the miscibility of the two compounds was also studied. The results show that the mixed monolayers prepared by method 1 cannot get a well-mixed state. The isotherms of mixed monolayers preserve both characteristics of SA and ODA and exhibit two collapse points. The calculated excess surface area is very small. Besides, distinguished domains corresponding to those of pure SA and ODA can be inspected from the BAM images. Such results indicate that SA and ODA cannot get a well-mixed phase via 2-dimensional mixing. On the contrary, in the mixed monolayer prepared by cospreading, the two compounds exhibit high miscibility. In the pi-A isotherms, the individual characteristics of SA and ODA disappear. The calculated excess area exhibits a highly positive deviation which indicates the existence of special interaction between the two compounds. The low compressibility of isotherm implies the highly rigid characteristic of the mixed monolayer. which was also sustained by the striplike collapse morphology observed from the BAM. The rigid characteristic of SA/ODA mixed monolayer was attributed to the formation of "catanionic surfactant" by electrostatic adsorption of headgroups of SA and ODA or to the formation of salt by acid-base reaction.     

Infrared reflection absorption spectroscopy coupled with Brewster angle microscopy for studying interactions of amphiphilic triblock copolymers with phospholipid monolayers

Novel water-soluble amphiphilic triblock copolymers poly(glycerol monomethacrylate)-b-poly(propylene oxide)-b-poly(glycerol monomethacrylate) (PGMA-b-PPO-b-PGMA) were synthesized because of their expected enhanced ability to interact with biological membranes compared to the well-known poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-b-PPO-b-PEO) block copolymers. Their bulkier hydrophilic PGMA blocks might induce a disturbance in the packing of liquid-crystalline lipid bilayers in addition to the effect caused by the hydrophobic PPO block alone. To gain a better insight into the polymer-membrane interactions at the molecular level, the adsorption kinetics and concomitant interactions of (PGMA14)(2-)PPO(34) with model membranes of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) were monitored using infrared reflection absorption spectroscopy (IRRAS) coupled with Brewster angle microscopy (BAM) and surface pressure (pi) measurements. The maximum penetration surface pressure of ca. 39 mN/m suggests that (PGMA14)(2-)PPO(34) is able to insert into lipid monolayers even above the so-called monolayer-bilayer equivalent pressure of 30-35 mN/m. Copolymer adsorption to a liquid-expanded DPPC-d62 monolayer proceeds in a two-step mechanism: (i) initially only the more hydrophobic PPO middle block penetrates the lipid monolayer; (ii) following the liquid-expanded-liquid-condensed (LE-LC) phase transition, the bulky PGMA hydrophilic blocks are dragged into the headgroup region as the PPO block inserts further into the fatty acid region. The adsorption kinetics is considerably faster for DMPC-d54 monolayers due to their higher fluidity. Copolymer adsorption to an LC-DPPC-d62 monolayer leads to a change in the monolayer packing by forcing the lipid alkyl chains into a more vertical orientation, their tilt angle with respect to the surface normal being reduced from initially 30 degrees +/- 3 degrees to 18 degrees +/- 3 degrees. BAM images rule out macroscopic phase separation and show that coalescence of DPPC-d62 LC domains takes place at relatively low surface pressures of pi > or = 23 mN/m, suggesting that (PGMA14)(2-)PPO (34) partitions into both LE as well as LC domains.