Simultaneous Photoreduction and Nitrogen Doping of Graphene Oxide for Supercapacitors by Direct Laser Writing

Graphene-based supercapacitors have attracted tremendous attention owing to their outstanding electrochemical performance. In terms of material, nitrogen(N)-doped graphene(NDG) displays enhanced specific capaci-tance and rate performance compared with bare graphene used as a supercapacitor electrode. However, it still remains a challenge to develop a facile and simple method of NDG in cost-effective manner. Here, we used a simple direct laser writing technique to accomplish the simultaneous photoreduction and N-doping of graphene oxide(GO) using urea as a N source. The N content of the resultant reduced N-doped graphene oxide(NGO) reached a maximum value of 6.37%. All reduced NGO(NRGO)-based supercapacitors exhibited a higher specific capacitance than those based on pure reduced GO(RGO). Interestingly, the electrochemical performance of NRGO-based supercapacitors varied with different contents ofN species. Therefore, we can control the properties of the obtained NRGOs by adjusting the doping ratios, an important step in developing effective graphene-based energy storage devices.     

影响高浓度氧化石墨烯分散液流变行为的重要因素及群体平衡动力学分析

氧化石墨烯(GO)片的基面和边缘上存在大量的含氧官能团,能很好地分散在水中,因而具有很好的加工性和广阔的应用前景。在较高浓度范围下,GO水分散液中存在着强烈的竞争性相互作用,从而对流变行为产生较大影响。在本文中,通过稳态、动态等流变实验以及理论分析,研究了pH值、温度和不同的有机溶剂对GO分散液流变行为的影响。结果表明,降低pH值、适当增加温度以及加入吡啶均可促进GO水分散液从粘弹性液体到凝胶态的转变。利用DLVO (Deryagin-Landau-Verwey-Overbeek)理论,探讨了GO片之间的范德华作用力以及双电层排斥作用的相互关系,及其对流变性能的影响。通过群体平衡模型(PBE)分析了GO分散液的屈服应力与体积分数的正相关关系。同时,通过蠕变和松弛实验发现,高浓度的GO分散液中结构变化及流变行为在很多方面与高聚物相似,利用Poyting-Thomson模型能较好地拟合其粘弹性行为。上述研究结果为深入研究复杂的GO分散体系提供理论支撑和实验依据。     

Nanocomposites and macroscopic materials: assembly of chemically modified graphene sheets

Self-assembly of chemically modified graphenes (CMGs), including graphene oxide (GO), reduced graphene oxide (RGO) and their derivatives, has emerged as one of the most appealing strategies to develop unprecedented graphene-based functional materials. With the assistance of various non-covalent forces such as hydrogen bonding, ionic, amphiphilic and π-π interactions, CMGs decorated with multiple functional groups are favorable for assembly with different organic and inorganic components which can result in hierarchical composites possessing unique structures and functions. In this review, we will summarize the state-of-the-art self-assembly strategies that have been established to construct CMG based nanomaterials, including nanoparticles, nanospheres, nanofibers, nanorods, nanosheets, and macroscopic thin films, fibers and porous networks. The driving forces involved in the self-assembly process will be elucidated in the context. Further, we will also highlight several representative examples of applications regarding the self-assembled CMG based materials.     

Stable aqueous dispersion of reduced graphene nanosheets via non-covalent functionalization with conducting polymers and application in transparent electrodes

We developed a simple and facile method of producing a stable aqueous suspension of reduced graphene oxide (RGO) nanosheets through the chemical reduction of graphene oxide in the presence of a conducting polymer dispersant, poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). This approach involves the cooperative interactions of strong π- π interactions between a two-dimensional graphene sheet and a rigid backbone of PEDOT and the intermolecular electrostatic repulsions between negatively charged PSS bound on the RGO sheets, which impart the colloidal stability of the resulting hybrid nanocomposite of RGO/PEDOT. Moreover, our one-step solution-based method allows preserving the intrinsic chemical and electronic properties of both components, yielding a hybrid film of RGO nanosheets of high conductivity of 2.3 kΩ/sq with a transmittance of 80%. By taking advantage of conducting network structure of conducting polymers which provides an additional flexibility and mechanical stability of RGO nanosheets, we demonstrate the potential application of hybrid RGO/PEDOT as highly flexible and transparent electrodes.     

Self-assembly of graphene oxide nanosheets in t-butanol/water medium under gamma-ray radiation

Graphene oxide (GO) nanosheets dispersed in strong acidic t-butanol/water medium can be reduced and self-assembled into a self-standing graphene hydrogel under γ-ray radiation, providing a facile and economical preparation method for hydroxylalkylated graphene-based aerogel.     

Recent progress in applications of graphene oxide for gas sensing: A review

This paper is a review of the recent progress on gas sensors using graphene oxide (GO). GO is not a new material but its unique features have recently been of interest for gas sensing applications, and not just as an intermediate for reduced graphene oxide (RGO). Graphene and RGO have been well known gas-sensing materials, but GO is also an attractive sensing material that has been well studied these last few years. The functional groups on GO nanosheets play important roles in adsorbing gas molecules, and the electric or optical properties of GO materials change with exposure to certain gases. Addition of metal nanoparticles and metal oxide nanocomposites is an effective way to make GO materials selective and sensitive to analyte gases. In this paper, several applications of GO based sensors are summarized for detection of water vapor, NO₂, H₂, NH₃, H₂S, and organic vapors. Also binding energies of gas molecules onto graphene and the oxygenous functional groups are summarized, and problems and possible solutions are discussed for the GO-based gas sensors.     

Stable aqueous dispersions of graphene prepared with hexamethylenetetramine as a reductant

Highly stable graphene aqueous dispersions were achieved by chemical reduction of graphene oxide with an environmentally friendly reagent of hexamethylenetetramine (HMTA). By this method, chemical reduction as well as dispersion of graphene can be carried out in one step without the need of organic stabilizers or pH control. The as-synthesized products were characterized by Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray diffraction, Raman spectroscopy, atomic force microscopy, scanning and transmission electron microscopy, and thermogravimetry and differential scanning calorimetry. It is revealed that the bulk of the oxygen-containing functional groups were removed from graphene oxide via HMTA reduction, and stable aqueous colloidal dispersions of graphene have a concentration up to ca. 0.65mg/mL. Moreover, it is found that the freshly precipitated graphene nanosheets can be re-dispersed in water with simple ultrasonic treatment. A mechanism for the formation of stable graphene colloidal dispersions is proposed. This simple and green approach should find practical applications in the preparation of graphene-based nanocomposites with a facile and low-cost solution processing technique.     

还原态氧化石墨烯载Pd纳米催化剂对甲酸氧化的电催化性能

采用改进的Hummers法氧化石墨后,对其超声剥离成氧化石墨烯水溶液,继之通过乙二醇还原Pd金属离子和氧化石墨烯,得到了还原态氧化石墨烯（RGO）负载Pd纳米催化剂,并用于甲酸的电催化氧化.透射电子显微镜和X射线衍射结果显示：负载于RGO上的Pd粒子平均粒径为3.8nm,其优先在RGO的褶皱和边缘处生长.电化学测试表明：RGO上残存的含氧基团降低了Pd催化剂受CO毒化的程度,Pd/RGO催化剂表现出了较商业化Pd/C更高的电催化活性和更好的稳定性.     

Layer-by-Layer Self-Assembled Multilayer Films Composed of Graphene/Polyaniline Bilayers: High-Energy Electrode Materials for Supercapacitors

Multilayer assemblies of uniform ultrathin film electrodes with good electrical conductivity and very large surface areas were prepared for use as electrochemical capacitors. A layer-by-layer self-assembly approach was employed in an effort to improve the processability of highly conducting polyaniline (PANi) and chemically modified graphene. The electrochemical properties of the multilayer film (MF-) electrodes, including the sheet resistance, volumetric capacitance, and charge/discharge ratio, were determined by the morphological modification and the method used to reduce the graphene oxide (GO) to reduced graphene oxide (RGO) in the multilayer films. The PANi and GO concentrations could be modulated to control the morphology of the GO monolayer film in the multilayer assemblies. Optical ellipsometry was used to determine the thickness of the GO film in a single layer (1.32 nm), which agreed well with the literature value (～1.3 nm). Hydroiodic acid (HI), hydrazine, or pyrolysis were tested for the reduction of GO to RGO. HI was found to be the most efficient technique for reducing the GO to RGO in the multilayer assemblies while minimizing damage to the virgin state of the acid-doped PANi. Ultimately, the MF-electrode, which could be optimized by fine-tuning the nanostructure and selecting a suitable reduction method, exhibited an excellent volumetric capacitance, good cycling stability, and a rapid charge/discharge rate, which are required for supercapacitors. A MF-electrode composed of 15 PANi/RGO bilayers yielded a volumetric capacitance of 584 F/cm(3) at a current density of 3.0 A/cm(3). Although this value decreased exponentially as the current density increased, approaching a value of 170 F/cm(3) at 100 A/cm(3), this volumetric capacitance is one of the best yet reported for the other carbon-based materials. The intriguing features of the MF-electrodes composed of PANi/RGO multilayer films offer a new microdimensional design for high energy storage devices for use in small portable electronic devices.     

水溶液体系中氧化石墨烯的γ射线辐射还原

石墨烯是一种碳原子以二维蜂窝状晶格结构构成的单片层材料,由于其具有优异的电传导性、力学性能和热传导性近年来受到广泛关注.本文采用γ射线辐射技术分别处理水溶液和对苯二胺(PPD)水溶液中的氧化石墨烯(GO),得到辐照还原氧化石墨烯(RGO)和胺基化修饰的还原氧化石墨烯(RGON).通过傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、拉曼(Raman)光谱、X射线衍射(XRD)和热失重分析(TGA)等表征分析产物的化学结构和元素组成;通过四探针测试仪和接触角测量仪研究产物的导电性能和亲水性.实验结果表明,在水溶液及PPD水溶液中γ射线辐射均可高效还原GO,还原后得到的RGO和RGON电导率均显著增大.PPD的胺基在辐射还原过程中还可以修饰到石墨烯的表面,因此RGON的亲水性比RGO好,但胺基的存在会干扰石墨烯表面π电子的传导,导致其电导率下降.     

Graphene-based electrochemical energy conversion and storage: fuel cells, supercapacitors and lithium ion batteries

Graphene has attracted extensive research interest due to its strictly 2-dimensional (2D) structure, which results in its unique electronic, thermal, mechanical, and chemical properties and potential technical applications. These remarkable characteristics of graphene, along with the inherent benefits of a carbon material, make it a promising candidate for application in electrochemical energy devices. This article reviews the methods of graphene preparation, introduces the unique electrochemical behavior of graphene, and summarizes the recent research and development on graphene-based fuel cells, supercapacitors and lithium ion batteries. In addition, promising areas are identified for the future development of graphene-based materials in electrochemical energy conversion and storage systems.     

Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

A Molecular Pillar Approach To Grow Vertical Covalent Organic Framework Nanosheets on Graphene: Hybrid Materials for Energy Storage

Hybrid 2D–2D materials composed of perpendicularly oriented covalent organic frameworks (COFs) and graphene were prepared and tested for energy storage applications. Diboronic acid molecules covalently attached to graphene oxide (GO) were used as nucleation sites for directing vertical growth of COF‐1 nanosheets (v‐COF‐GO). The hybrid material has a forest of COF‐1 nanosheets with a thickness of 3 to 15 nm in edge‐on orientation relative to GO. The reaction performed without molecular pillars resulted in uncontrollable growth of thick COF‐1 platelets parallel to the surface of GO. The v‐COF‐GO was converted into a conductive carbon material preserving the nanostructure of precursor with ultrathin porous carbon nanosheets grafted to graphene in edge‐on orientation. It was demonstrated as a high‐performance electrode material for supercapacitors. The molecular pillar approach can be used for preparation of many other 2D‐2D materials with control of their relative orientation.     

Surface and Interface Engineering of Graphene Oxide Films by Controllable Photoreduction

We report herein the engineering of the surface/interface properties of graphene oxide (GO) films by controllable photoreduction treatment. In our recent works, typical photoreduction processes, including femtosecond laser direct writing (FsLDW), laser holographic lithography, and controllable UV irradiation, have been employed to make conductive reduced graphene oxide (RGO) microcircuits, hierarchical RGO micro‐nanostructures with both superhydrophobicity and structural color, as well as moisture‐responsive GO/RGO bilayer structures. Compared with other reduction protocols, for instance, chemical reduction and thermal annealing, the photoreduction strategy shows distinct advantages, such as mask‐free patterning, chemical‐free modification, controllable reduction degree, and environmentally friendly processing. These works indicate that the surface and interface engineering of GO through controllable photoreduction of GO holds great promise for the development of various graphene‐based microdevices.     

Activated carbon/graphene composites with high-rate performance as electrode materials for electrochemical capacitors

Glucose-derived activated carbon (GAC)/reduced graphene oxide (RGO) composites are prepared by pre-carbonization of the precursors (aqueous mixture of glucose and graphene oxide) and KOH activation of the pyrolysis products. The effect of the mass ratio of graphene oxide (GO) in the precursor on the electrochemical performance of GAC/RGO composites as electrode materials for electrochemical capacitors is investigated. It is found that the thermally reduced graphene oxide sheets serves as a wrinkled carrier to support the activated carbon particles after activation. The pore size distribution and surface area are depended on the mass ratio of GO. Besides, the rate capability of GAC is improved by the introduction of GO in the precursor. The highest specific capacitance of 334 F g^?1 is achieved for the GAC/RGO composite prepared from the precursor with a GO mass ratio of 3 %.     

用于压力传感的还原氧化石墨烯/丝蛋白基多孔复合材料

利用丝蛋白能够在还原氧化石墨烯片层上发生选择性聚集的特性,制备了还原氧化石墨烯片层上富集有丝蛋白微纤且分散性良好的还原氧化石墨烯片和丝蛋白混合溶液,并通过冷冻以及低温乙醇处理的方法得到一系列不同比例的还原氧化石墨烯/丝蛋白基多孔复合材料.随后,采用溶液浸泡的方法在多孔材料表面再次沉积还原氧化石墨烯,以进一步提高还原氧化石墨烯/丝蛋白基多孔复合材料的压敏导电性.系统观察和测试结果表明,还原氧化石墨烯的引入,不仅使得多孔材料内部出现了相应的微纳结构,同时也提高了多孔材料的力学性能.还原氧化石墨烯/丝蛋白基多孔复合材料在完全湿态下兼具较好的强度和弹性,可以在0%~80%的压缩应变之间实现良好的压缩回复效果和压力传感性能.其中,最佳比例下的还原氧化石墨烯/丝蛋白基多孔复合材料在低压力下的灵敏度可达0.15 kPa?1,在0~17.3 kPa范围内能够高效工作并且具有优异的电学稳定性和耐疲劳性.因此,还原氧化石墨烯/丝蛋白基多孔复合材料因其高灵敏度、宽工作范围、结构可调以及可塑性好等诸多优点,有望在柔性压力传感方面获得较好的应用.     

激光直写微型RGO/MWCNT/CF平面柔性超级电容器的制备及性能

将采用改性Hummers法制备的氧化石墨烯与多壁碳纳米管(MWCNT)复合, 通过激光直写的方法制备了以棉织物(Cotton fabric, CF)为基底的石墨烯复合碳纳米管的同心圆形织物柔性平面超级电容器(RGO/MWCNT/CF). 通过扫描电子显微镜、 X 射线衍射和拉曼光谱技术对RGO/MWCNT/CF进行了表征, 并对超级电容器的电导率和电化学性能进行了测试. 结果表明, 电极材料经激光还原后导电率达到了7.19×10 ⁴ S/m, 表现出良好的导电性能. 以RGO/MWCNT/CF为工作电极、 PVA/LiCl凝胶为电解质组装的超级电容器具有良好的电化学性能, 在电位窗口为0~1 V、 电流密度为40.8 mA/cm ²时比电容达到24 mF/cm ², 功率密度为61 mW·h/kg, 能量密度为1.22 mW·h/kg, 且循环1000次仍能保持92%的比电容.     

Graphene-based sensors for detection of heavy metals in water: a review

Graphene (G) is attracting significant attention because of its unique physical and electronic properties. The production of graphene through the reduction of graphene oxide (GO) is a low-cost method. The reduction of GO can further lead to electrically conductive reduced GO. These graphene-based nanomaterials are attractive for high-performance water sensors due to their unique properties, such as high specific surface areas, high electron mobilities, and exceptionally low electronic noise. Because of potential risks to the environment and human health arising from heavy-metal pollution in water, G-/GO-based water sensors are being developed for rapid and sensitive detection of heavy-metal ions. In this review, a general introduction to graphene and GO properties, as well as their syntheses, is provided. Recent advances in optical, electrochemical, and electrical detection of heavy-metal ions using graphene or GO are then highlighted. Finally, challenges facing G/GO-based water sensor development and outlook for future research are discussed.     

Mixed colloidal suspensions of reduced graphene oxide and layered metal oxide nanosheets: useful precursors for the porous nanocomposites and hybrid films of graphene/metal oxide

Homogeneously mixed colloidal suspensions of reduced graphene oxide, or RGO, and layered manganate nanosheets have been synthesized by a simple addition of the exfoliated colloid of RGO into that of layered MnO(2). The obtained mixed colloidal suspensions with the RGO/MnO(2) ratio of ≤0.3 show good colloidal stability without any phase separation and a negatively charged state with a zeta (ζ) potential of -30 to -40?mV. The flocculation of these mixed colloidal suspensions with lithium cations yields porous nanocomposites of Li/RGO-layered MnO(2) with high electrochemical activity and a markedly expanded surface area of around 70-100?m(2) g(-1). Relative to the Li/RGO and Li/layered MnO(2) nanocomposites (≈116 and ≈167?F?g(-1)), the obtained Li/RGO-layered MnO(2) nanocomposites deliver a larger capacitance of approximately 210?F?g(-1) with good cyclability of around 95-97?% up to the 1000th cycle, thus indicating the positive effect of hybridization on the electrode performances of RGO and lithium manganate. Also, an electrophoretic deposition of the mixed colloidal suspensions makes it possible to easily fabricate uniform hybrid films composed of graphene and manganese oxide. The obtained films show a distinct electrochemical activity and a homogeneous distribution of RGO and MnO(2). The present experimental findings clearly demonstrate that the utilization of the mixed colloidal suspensions as precursors provides a facile and universal methodology to synthesize various types of graphene/metal oxide hybrid materials.