游离氨抑制协同过程控制实现渗滤液短程硝化

采用UASB-SBR生化系统处理高氮晚期渗滤液为研究对象,在获得稳定有机物和氮去除的前提下,考察了采用游离氨(FA)协同过程控制对实现渗滤液长期稳定短程硝化的可行性,建立实现与维持SBR系统内稳定短程硝化的途径及方法.试验结果表明:经过36d的运行,SBR系统的亚硝积累率始终稳定在90%以上,获得了稳定的短程硝化.游离氨和过程控制的协同作用是实现与维持SBR反应器稳定短程硝化的决定因素,以DO,ORP和pH作为渗滤液短程硝化反硝化的过程控制参数是可行的,在充分利用较高FA抑制亚硝酸盐氧化菌活性的前提下,过程控制能够准确判断硝化终点,避免过度曝气破坏短程硝化,从而为氨氧化菌(AOB)的生长创造有利条件,有效抑制亚硝酸盐氧化菌(NOB)的生长并逐渐从系统中淘洗出去,实现了硝化菌种群的优化,荧光原位杂交技术(FISH)检测也证明这一点.在此基础上,通过批次实验考察了微生物种群的反硝化动力学特性,符合Monod动力学方程,NO2--N基质最大比利用速率和半饱和常数分别为0.44gNO2--NgVSS-1d-1和15.8mgL-1.     

Influence of Free Ammonia on Completely Autotrophic Nitrogen Removal over Nitrite (CANON) Process

Free ammonia (FA) plays a significant role in the stable, long-term, completely autotrophic nitrogen removal over nitrite (CANON) system operation. The influence of FA on the CANON process in a sequencing batch biofilm reactor was explored. Under controlled FA concentrations of 5.0?mg L^?1 to 10.0?mg L^?1, nitrite-oxidizing bacteria (NOB) was inhibited and achieved partial nitrification, which was important for a successful and quick start-up of the CANON process from activated sludge. However, NOB was acclimated to the condition after the process start-up. Ammonia-oxidizing bacteria (AOB) and anaerobic ammonium-oxidizing bacteria (AnAOB) activities were unaffected when FA concentration was increased from 10?mg L^?1 to 17?mg L^?1, but NOB was completely inhibited only for a short time. The AOB and AnAOB activities were inhibited and the CANON system was deteriorated when FA concentration reached 30?mg L^?1 to 32.5?mg L^?1 at pH?8.5, whereas NOB activity was unaffected. Correlation analysis showed that FA concentration higher than 20?mg L^?1 resulted in the deterioration of the system.     

The Stability of Accumulating Nitrite from Swine Wastewater in a Sequencing Batch Reactor

Shortcut nitrification is the first step of shortcut nitrogen removal from swine wastewater. Stably obtaining an effluent with a significant amount of nitrite is the premise for the subsequent shortcut denitrification. In this paper, the stability of nitrite accumulation was investigated using a 1.5-day hydraulic retention time in a 10-L (working volume) activated sludge sequencing batch reactor (SBR) with an 8-h cycle consisted of 4 h 38 min aerobic feeding, 1 h 22 min aerobic reaction, 30 min settling, 24 min withdrawal, and 1 h 6 min idle. The nitrite production stability was tested using four different ammonium loading rates, 0.075, 0.062, 0.053, and 0.039 g NH₄-N/g (mixed liquid suspended solid, MLSS) day in a 2-month running period. The total inorganic nitrogen composition in the effluent was not affected when the ammonium load was between 0.053 and 0.075 g NH₄-N/g MLSS · day (64% NO₂-N, 16% NO₃-N, and 20% NH₄-N). Under 0.039 g NH₄-N/g MLSS · day, more NO₂-N was transformed to NO₃-N with an effluent of 60% NO₂-N, 20% NO₃-N, and 20% NH₄-N. The reducing load test was able to show the relationship between a declining free nitrous acid (FNA) concentration and the decreasing nitrite production, indicating that the inhibition of FNA on nitrite oxidizing bacteria depends on its levels and an ammonium loading rate around 0.035 g NH₄-N/g MLSS · day is the lower threshold for producing a nitrite dominance effluent in the activated sludge SBR under the current settings.     

Inhibition effect of free ammonia and free nitrous acid on nitrite-oxidising bacteria during sludge liquor treatment: influence of feeding strategy

The importance of feeding strategy for the long-term selective inhibition of nitrite-oxidising bacteria (NOB) was demonstrated by comparison of laboratory-scale bioreactors: Completely Stirred Tank Reactor (CSTR) and Sequencing Batch Reactor (SBR). Moreover, the effect of the change of reactor operation regime from CSTR to SBR was demonstrated. Sludge liquor containing ammonia nitrogen in a range of 970–1500 mg L^?1 was the influent of the reactors. The experiments were performed at (23 ± 2)°C, with high concentration of dissolved oxygen (up to 8 mg L^?1) and with unlimited sludge retention time. In the SBR, permanent restriction of NOB activity was achieved for more than 700 days by the strong inhibition effect of fluctuating concentrations of free ammonia and free nitrous acid during the operational cycles of SBR. In contrast, nitrite-oxidising bacteria were able to gradually adapt to the conditions prevailing in CSTR and produce nitrate although the concentration of free ammonia and free nitrous acid significantly exceeded inhibition limits for NOB activity in this system. Transferring the reactor operation regime from CSTR to SBR resulted in immediate and permanent inhibition of NOB activity in the reactor.     

High-performance system for partial nitritation of reject water resistant to temperature fluctuation

A sequencing batch reactor (SBR) applying partial nitritation for reject water treatment was operated for 330 days at a laboratory scale. The system was repeatedly exposed to sudden temperature drops from 24 to 17 °C. The nitrogen loading rate (NLR) was increased incrementally from 0.4 to 1.5 kg/(m³ day) with the aim to evaluate temperature stability of the process at different NLR value. Total nitrite nitrogen (TN^IIIN) represented 94–99% of oxidised nitrogen in the effluent throughout the entire operation of the reactor. It was found that the pH profile during the SBR cycle, nitrogen removal efficiency and concentration of N-species in the effluent did not show significant changes following temperature decreases occurring within the entire applied range of the NLR. Simultaneously, the nitrogen removal rate increased proportionally with the NLR where the nitrogen oxidation efficiency reached 48–58% regardless of actual temperature and NLR. These observations clearly demonstrate the temperature stability of applied partial nitritation system during the tested temperature fluctuations.     

Influence of human serum albumin on photodegradation of folic acid in solution

It has been proposed that photodegradation of folates may be the reason for the pigmentation of races living under high fluence rates of ultraviolet radiation. The photodegradation of folic acid (FA) induced by ultraviolet-A (UV-A) radiation, in solution and in the presence of human serum albumin (HSA), was studied with absorption and fluorescence spectroscopy. FA photodegradation, with formation of p-aminobenzoyl-l-glutamic acid, 6-formylpterin and pterin-6-carboxylic acid, was found to follow an exponential trend. A scheme of FA photodegradation, which involves photosensitization of FA degradation by its photoproducts, was proposed. The rate of FA photodegradation decreased drastically in the presence of HSA, whereas the spectral characteristics of the photoproducts remained constant. The reduction of the FA photodegradation rate by HSA was accompanied by degradation of tryptophan in HSA. Tryptophan, when added to solutions of FA, had a similar effect as HSA. In solutions of FA and HSA the FA photoproducts cause photodamage mainly to HSA rather than to FA itself. The oxygen dependence of FA photodegradation and the inhibition of this process by sodium azide indicate that singlet oxygen may participate in the photosensitizing activity of FA photoproducts.     

Evaluation of the stability of shortcut nitrification-denitrification process based on online specific oxygen uptake rate monitoring

Shortcut nitrification-denitrification (SCND) is widely concerned because of its low energy consumption and high nitrogen removal efficiency. However, the current difficulty lies in the stable maintenance of SCND performance, which leads to the challenge of large-scale application of this new denitrification technology. In this study, the nitrogen removal pathway from complete nitrification-denitrification (CND) to SCND was rapidly realized under high free ammonia (FA), high pH and low dissolved oxygen (DO) conditions. The variations of specific oxygen uptake rate (SOUR) of activated sludge in both processes were investigated by an online SOUR monitoring device. Different curves of SOUR from CND to SCND process were observed, and the ammonia peak obtained based on SOUR monitoring could be used to control aeration time accurately in SCND process. Accordingly, the SOUR ratio of ammonia oxidizing bacteria (AOB) to nitrite oxidizing bacteria (NOB) (SOUR_AOB/SOUR_NOB) was increased from 1.40 to 2.93. 16S rRNA Miseq high throughput sequencing revealed the dynamics of AOB and NOB, and the ratio of relative abundance (AOB/NOB) was increased from 1.03 to 3.12. Besides, SOUR_AOB/SOUR_NOB displayed significant correlations to ammonia removal rate (P<0.05), ammonia oxidation rate / nitrite oxidation rate (P < 0.05), nitrite accumulation rate (P < 0.05) and the relative abundance of AOB/NOB (P < 0.05). Thus, a strategy for evaluation the SCND process stability based on online SOUR monitoring is proposed, which provides a theoretical basis for optimizing the SCND performance.     

Biological Treatment of Shrimp Aquaculture Wastewater Using a Sequencing Batch Reactor

To improve the water quality in the shrimp aquaculture, a sequencing batch reactor (SBR) has been tested for the treatment of shrimp wastewater. A SBR is a variation of the activated sludge biological treatment process. This process uses multiple steps in the same tank to take the place of multiple tanks in a conventional treatment system. The SBR accomplishes equalization, aeration, and clarification in a timed sequence in a single reactor basin. This is achieved in a simple tank, through sequencing stages, which include fill, react, settle, decant, and idle. A laboratory scale SBR and a pilot scale SBR was successfully operated using shrimp aquaculture wastewater. The wastewater contained high concentration of carbon and nitrogen. By operating the reactor sequentially, viz, aerobic and anoxic modes, nitrification and denitrification were achieved as well as removal of carbon in a laboratory scale SBR. To be specific, the initial chemical oxygen demand (COD) concentration of 1,593 mg/l was reduced to 44 mg/l within 10 days of reactor operation. Ammonia in the sludge was nitrified within 3 days. The denitrification of nitrate was achieved by the anaerobic process and 99% removal of nitrate was observed. Based on the laboratory study, a pilot scale SBR was designed and operated to remove excess nitrogen in the shrimp wastewater. The results mimicked the laboratory scale SBR.     

Microflow injection system based on a multicommutation technique for nitrite determination in wastewaters

In this work a microflow structure, suitable for micro-FIA (micro flow injection analysis), will be described, evaluated and applied to real samples. Microchannels, the detector flow cell and input/output ports have been micromachined in silicon and sealed with anodically bonded Pyrex glass. The channels are defined by etching approximately 200 microm depth in silicon using a dry reactive ion etching (RIE) process. Optical windows integrated in the chip structure allow simple absorbance/transmission measurements to be made. The optical measurements were made using an LED as emitter (lambda=525 nm) and a photodiode as a detector. A Visual-Basic program has been developed to control an automatic burette, three-way solenoid valves and the data acquisition system. The micro-FIA for nitrite determination using the Griess-Ilosvay reaction has been implemented for the on-line monitoring of wastewater treatment plants (WWTPs). The multicommutation concept has been applied in order to enhance the mixing process inside the microsystem. Tandem streams of reagent and sample were generated and evaluated at different commutation frequencies. Two optimal frequencies, 400/200 ms and 150/450 ms, were found to be the most suitable ones. The first commutation ratio gave rise to wide linear working range (0-250 ppm), in spite of a high detection limit (0.35 ppm) and a low sensitivity (0.0041+/-0.0004 AU ppm-1). With the second ratio, the working linear range was smaller (0-50 ppm) but the detection limit (0.17 ppm) and the sensitivity (0.0091+/-0.0003 AU ppm-1) improved remarkably. Finally, real samples with a high nitrite concentration (0-1500 ppm) coming from a study of kinetic inhibition in the nitrification process at a WWTP has been analysed with the proposed micro-FIA system. The obtained results have allowed the corroboration of the model of inhibition by the nitrite ion with great exactitude.     

Release of nitric oxide from nitrated fatty acids: Insights from computational chemistry

Nitrated fatty acids (NO₂‐FAs) exhibit a variety of important biological attributes, including a nitric oxide (˙NO) donor and a cell‐signaling molecule. We investigated the mechanisms of fatty‐acid nitration, and the release of ˙NO from NO₂‐FAs. NO₂‐FAs are formed effectively by the addition of ˙NO₂, followed by either hydrogen abstraction or addition of a second NO₂. The latter reaction results in a vicinal nitronitrite ester form of FA, which isomerizes into vicinal nitrohydroxy FA via hydronium ion catalysis. The nitrohydroxy FAs exist in equilibria with NO₂‐FAs. Nitration of conjugated linoleic acid (cLA) was proved to be significantly more efficient than that of LA. In a nonaqueous environment, release of ˙NO from nitrite ester (ONO‐FA) was facilitated by ˙NO₂. Furthermore, the release of ˙NO from NO₂‐cLA is the most favorable in the nitrite ester mechanism. In an aqueous environment, the modified Nef reaction was shown to be feasible. In addition, the release of ˙NO from 10‐ and 12‐NO₂‐LA involves a larger reaction barrier and is more endergonic than those from 9‐ and 13‐NO₂‐LA.     

两种不同粒径的SBR粒子对透明ABS树脂力学性能影响

从SBR橡胶粒子出发,采用乳液原位悬浮聚合方法合成了一系列透明ABS树脂.采用小粒径SBR橡胶粒子虽然可以获得透明性良好的透明ABS树脂,但树脂的抗冲性能较差.采用大粒径SBR橡胶粒子ABS树脂的透明性明显下降.采用由粒径分别为400nm和70nm两种SBR橡胶粒子所组成的双峰粒子(指粒度分布谱上有两个峰)体系,当二者比例在4/6~6/4范围内,总橡胶粒子含量为15%~18%时,所得到的透明ABS树脂冲击强度已经达到90~120J/m,透光率超过80%.初步探讨了不同增韧体系的ABS树脂的脆韧转变关系;研究了不同粒径橡胶粒子的协同增韧效应.确定了由SBR双峰粒子增韧体系获得具有良好力学和透光性能的ABS树脂的基本条件.     

Mechanical properties and structural characteristics of PP/PP‐g‐SBR nanocomposites prepared by dynamical photografting

Poly(propylene) (PP)/PP grafted styrene‐butadiene rubber (PP‐g‐SBR) nanocomposite was prepared by blending PP with PP‐g‐SBR using dynamical photografting. The crystal morphological structure, thermal behavior, and mechanical properties of PP/PP‐g‐SBR nanocomposites have been studied by photoacoustic Fourier transform infrared spectroscopy (PAS‐FT‐IR), wide‐angle X‐ray diffraction (WAXD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and mechanical measurements. The data obtained from the mechanical measurements show that the PP‐g‐SBR as a modifier can considerably improve the mechanical properties of PP/PP‐g‐SBR nanocomposites, especially for the notched Izod impact strength (NIIS). The NIIS of the nanocomposite containing 2 wt% PP‐g‐SBR measured at 20°C is about 2.6 times that of the control sample. The results obtained from PAS‐FTIR, WAXD, SEM, and DSC measurements revealed the enhanced mechanism of impact strength of PP/PP‐g‐SBR nanocomposites as follows: (i) the β‐type crystal of PP formed and its content increased with increasing the photografting degree of PP‐g‐SBR; (ii) the size of PP‐g‐SBR phase in the PP/PP‐g‐SBR nanocomposites obviously reduced and thus the corresponding number of PP‐g‐SBR phase increased with increasing the photografting degree of PP‐g‐SBR. All the earlier changes on the crystal morphological structures are favorable for increasing the compatibility and enhancing the toughness of PP at low temperature. Copyright © 2004 John Wiley & Sons, Ltd.     

Influence of the structural characteristic of pyrolysis products on thermal stability of styrene-butadiene rubber composites reinforced by different particle sized kaolinites

A series of rubber composites were prepared by blending styrene-butadiene rubber (SBR) latex and the different particle sized kaolinites. The thermal stabilities of the rubber composites were characterized using thermogravimetry, digital photography, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. Kaolinite SBR composites showed much greater thermal stability when compared with that of the pure SBR. With the increase of kaolinite particle size, the pyrolysis products became much looser; the char layer and crystalline carbon content gradually decreased in the pyrolysis residues. The pyrolysis residues of the SBR composites filled with the different particle sized kaolinites showed some remarkable changes in structural characteristics. The increase of kaolinite particle size was not beneficial to form the compact and stable crystalline carbon in the pyrolysis process, and resulted in a negative influence in improving the thermal stability of kaolinite/SBR composites.     

Rheological properties of styrene–butadiene rubber filled with electron beam modified surface treated dual phase fillers

The rheological properties of styrene–butadiene rubber (SBR) loaded with dual phase filler were measured using Monsanto Processability Tester (MPT) at three different temperatures (100°C, 110°C and 130°C) and four different shear rates (61.3, 306.3, 613, and 1004.5 s⁻¹). The effect of electron beam modification of dual phase filler in absence and presence of trimethylol propane triacrylate (TMPTA) or triethoxysilylpropyltetrasulphide (Si-69) on melt flow properties of SBR was also studied. The viscosity of all the systems decreases with shear rate indicating their pseudoplastic or shear thinning nature. The higher shear viscosity for the SBR loaded with the electron beam modified filler is explained in terms of variation in structure of the filler upon electron beam irradiation. Die swell of the modified filler loaded SBR is slightly higher than that of the unmodified filler loaded rubber, which is explained by calculating normal stress difference for the systems. Activation energy of the modified filler loaded SBR systems is also slightly higher than that of the control filler loaded SBR system.     

Morphology and performance of styrene butadiene rubber filled with modified graphite nanoplatelet and carbon black

In our work, effects of 2‐mercapto‐1‐methylimidazole modified graphite nanoplatelet (MMI–GN) and carbon black (CB) on static and dynamic mechanical properties of styrene butadiene rubber (SBR) composites were studied. MMI–GN is synthesized by ball‐mill process, and the result reveals that π–π interactions existed between MMI and GN. The results demonstrate that the static and dynamic mechanical performances of SBR/CB/MMI–GN composites are significantly improved over these of SBR/CB and SBR/CB/GN composites. Compared with SBR/CB, the tensile strength, tear strength, and modulus at 300% elongation of SBR/CB/MMI–GN–3 are greatly improved by 45%, 27%, and 4%, respectively. And the rolling resistance of SBR/CB/MMI–GN–3 is reduced by 3.7% with remaining almost unchanged in the wet grip property. The superiority of MMI–GN in the enhancement for the overall performance of SBR/CB composites is attributed to the well dispersion of GN throughout the SBR matrix and the enhanced interfacial interactions between GN and the SBR matrix. This work might expedite synthesis of the graphite‐based materials for enhancing rubber composites, and enlarge the potential applications of modified graphite to fabricate the high‐performance rubber composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Flow analysis-vapor phase generation-Fourier transform infrared (FA-VPG-FTIR) spectrometric determination of nitrite

In this work, the coupling between flow analysis (FA)–vapor phase generation (VPG) and Fourier transform infrared spectrometry (FTIR) has been proposed as a novel and alternative strategy for the determination of nitrite. The analyte was transformed into the gaseous nitric oxide (NO) by on-line reaction with potassium iodide (KI) or ascorbic acid in acidic medium. The gaseous NO generated was transported by means of a N₂ gas carrier stream inside the IR gas cell and the corresponding FTIR spectrum was acquired in a continuous mode. The absorbance at 1876 cm⁻¹, corrected by a baseline established between 1879 and 1872 cm⁻¹ at a nominal resolution of 2 cm⁻¹, was selected as a measurement criterion. The effect of different spectroscopic and flow analysis experimental parameters, such as nominal resolution, number of scans, reducing agent and its concentration, acidic medium, reagents and sample flow rates, and the carrier gas flow rate on the analytical signal, and then in the figures of merit were initially evaluated by using a standard short path length (10 cm) IR gas cell. The optimization of the system was carried out by the univariate method. The main aims of this study were: (i) to investigate the on-line generation of gaseous nitric oxide in a continuous flow system, and (ii) the use of Fourier transform infrared spectrometry as an alternative and selective detector for the determination of nitrite. The proposed method was initially tested and applied for the determination of nitrite in samples with very high concentration of nitrite, such as frankfurters.     

Determination of nitrite by inhibition of the chemiluminescence of acriflavine in a flow-injection assembly

The indirect determination of nitrite was performed with a flow-injection assembly on the basis of the inhibition of the analytical output obtained in a luminometer by oxidation of acriflavine. The acriflavine solution merged with the nitrite and the resulting mixture was injected into a pure water stream. This solution merged with the oxidant solution (potassium permanganate in sulfuric acid medium) and the resulting chemiluminiscence was affected (inhibited) by the presence of nitrite after reaction with the aminoacridine. The method was applicable over the range 10-800 microg l(-1) of nitrite with a correlation coefficient of 0.9960. The relative standard deviation was 1.4% and the throughput was 76 samples h(-1). The influence of foreign substances was also tested. A solid-phase reactor, filled with Amberlite IRA-900, was inserted in the assembly for the on-line preconcentration of nitrite; the analytical output resulted in an increase of up to 11.5-fold. The method was applied to the determination of nitrites in residual waters, industrial formulations and soil samples.     

Stable partial nitritation of mature landfill leachate in a continuous flow bioreactor: Long-term performance,microbial community evolution,and mechanisms

A continuous flow bioreactor was operated for 300 days to investigate partial nitritation (PN) of mature landfill leachate, establishing the long-term performance of the system in terms of the microbial community composition, evolution, and interactions. The stable operation phase (31–300 d) began after a 30 days of start-up period, reaching an average nitrite accumulation ratio (NAR) of 94.43% and a ratio of nitrite nitrogen to ammonia nitrogen (NO₂⁻-N/NH₄⁺-N) of 1.16. Some fulvic-like and humic-like compounds and proteins were effectively degraded in anaerobic and anoxic tanks, which was consistent with the corresponding abundance of methanogens and syntrophic bacteria in the anaerobic tank, and organic matter degrading bacteria in the anoxic tank. The ammonia-oxidizing bacteria (AOB) Nitrosomonas was found to be the key functional bacteria, exhibiting an increase in abundance from 0.27% to 6.38%, due to its collaborative interactions with organic matter degrading bacteria. In-situ inhibition of nitrite-oxidizing bacteria (NOB) was achieved using a combination of free ammonia (FA) and free nitrous acid (FNA), low dissolved oxygen (DO) with fewer bioavailable organics conditions were employed to maintain stable PN and a specific ratio of NO₂⁻-N/NH₄⁺-N, without an adverse impact on AOB. The synergistic relationships between AOB and both denitrifying bacteria and organic matter degrading bacteria, were found to contribute to the enhanced PN performance and microbial community structure stability. These findings provide a theoretical guidance for the effective application of PN-Anammox for mature landfill leachate treatment.     

Interfacial mechano-chemical grafting in styrene-butadiene rubber/halloysite nanotubes composites

SBR/unmodified HNT composites were prepared by open-mill mixing and vulcanization. The results showed that HNT could decrease the scorch and optimum cure time, and play a significant role in reinforcing SBR vulcanizates. Mechano-chemical grafting at the interface between HNT and SBR was investigated by using infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), solid-state ¹³C NMR spectra and bonded rubber content, etc. The results showed the shearing force during the mixing process can impel the grafting reaction of SBR onto the surfaces of HNT, which leads to interfacial chemical bonding between phenyl’s α-H of SBR and the surface groups of HNT with Si-OH or Al-OH. Thus, the mechanical properties of the composites were significantly enhanced.     

Design and Synthesis of Transparent Poly （acrylonitrile-butadiene-styrene） and Relationship Between Its Phase Construction and Transparency

IntroductionABS resins have been widely applied to the field ofengineering materials because of their excellent me-chanical,electrical,physical,and chemical proper-ties.Typically,ABS resins comprise a rigid copolymermatrix-phase dispersed in a graft copol…