Structure of rutile TiO2 (1 1 0) in water and 1 molal Rb at pH 12: Inter-relationship among surface charge, interfacial hydration structure, and substrate structural displacements

The rutile (1 1 0)-aqueous solution interface structure was measured in deionized water (DIW) and 1 molal (m) RbCl + RbOH solution (pH 12) at 25 °C with the X-ray crystal truncation rod method. The rutile surface in both solutions consists of a stoichiometric (1 × 1) surface unit mesh with the surface terminated by bridging oxygen (BO) and terminal oxygen (TO) sites, with a mixture of water molecules and hydroxyl groups (OH⁻) occupying the TO sites. An additional hydration layer is observed above the TO site, with three distinct water adsorption sites each having well-defined vertical and lateral locations. Rb⁺ specifically adsorbs at the tetradentate site between the TO and BO sites, replacing one of the adsorbed water molecules at the interface. There is no further ordered water structure observed above the hydration layer. Structural displacements of atoms at the oxide surface are sensitive to the solution composition. Ti atom displacements from their bulk lattice positions, as large as 0.05 Å at the rutile (1 1 0)-DIW interface, decay in magnitude into the crystal with significant relaxations that are observable down to the fourth Ti-layer below the surface. A systematic outward shift was observed for Ti atom locations below the BO rows, while a systematic inward displacement was found for Ti atoms below the TO rows. The Ti displacements were mostly reduced in contact with the RbCl solution at pH 12, with no statistically significant relaxations in the fourth layer Ti atoms. The distance between the surface 5-fold Ti atoms and the oxygen atoms of the TO site is 2.13 ± 0.03 Å in DIW and 2.05 ± 0.03 Å in the Rb⁺ solution, suggesting molecular adsorption of water at the TO site to the rutile (1 1 0) surface in DIW, while at pH 12, adsorption at the TO site is primarily in the form of an adsorbed hydroxyl group.     

Structure and reactivity of the hydrated hematite (0 0 0 1) surface

The structure of the hydroxylated hematite (0 0 0 1) surface was investigated using crystal truncation rod diffraction and density functional theory. The combined experimental and theoretical results suggest that the surface is dominated by two hydroxyl moieties—hydroxyls that are singly coordinated and doubly coordinated with Fe. The results are consistent with the formation of distinct domains of these surface species; one corresponding to the hydroxylation of the surface Fe-cation predicted to be most stable under UHV conditions, and the second a complete removal of this surface Fe species leaving the hydroxylated oxygen layer. Furthermore, our results indicate that the hydroxylated hematite surface structures are significantly more stable than their dehydroxylated counterparts at high water partial pressures, and this transition in stability occurs at water pressures orders of magnitude below the same transition for α-alumina. These results explain the observed differences in reactivity of hematite and alumina (0 0 0 1) surfaces with respect to water and binding of aqueous metal cations.     

A combined ab initio and atomistic simulation study of the surface and interfacial structures and energies of hydrated scheelite: introducing a CaWO4 potential model

Density functional theory (DFT) calculations of the calcium tungstate material scheelite CaWO₄ have shown that water introduced into the bulk material remains undissociated and leads to swelling and layering of the structure, a behaviour which may resemble silicate clays more than three-dimensional poly-anionic materials, but which results in a structure that is even more similar to a rare hydrous calcium carbonate phase--a finding which suggests the existence of semi-crystalline hydrous pre-cursor phases to the dehydrated scheelite material. An interatomic potential model was derived for CaWO₄ which adequately reproduces structural and physical properties of the material and is in good agreement with the DFT calculations in respect of the structure and energy of hydration (DFT: 85 kJ mol⁻¹, atomistic: 105 kJ mol⁻¹). Atomistic simulations of a range of scheelite surfaces confirm the dominance of the experimental {1 0 1} and {0 0 1} cleavage planes in the morphology of the dry crystal and the presence of the experimentally found {1 0 3} and {1 0 1} surfaces in the hydrated morphology. Hydration of the surfaces shows non-Langmuir behaviour, where the interactions between surface calciums and oxygen atoms of the water molecules outweigh hydrogen-bonding to the surface oxygen atoms or intermolecularly within the water layer. The hydration energies indicate physisorption of water, ranging from 22 kJ mol⁻¹ on the {0 0 1} surface to 78 kJ mol⁻¹ on the more reactive {1 0 3} surface.     

Nanoridge domains in α-phase W films

Two types of nanoridge domains oriented with each other with an angle ranging between 109° and 124° were measured by scanning tunneling microscopy on the α-W film sputter deposited on an oxidized Si surface. Each domain contains nanoridges with a period of 7.5 ± 1.0 nm. No such domains were observed on the β-W film surface. We argued that due to the anisotropy of the W(1 1 0) surface, the impinging W atoms diffuse faster along the 〈111〉 directions on the surface to form the nanoridge structure. There are two equivalent 〈111〉 directions, which give rise to two orientational domains with an angle of ∼110°. An isotropic β-W(1 0 0) phase has no preferred diffusion direction for the impinging W atoms and therefore, no nanoridge domain structure was observed.     

Study on the electrical and optical properties of Ag/Al-doped ZnO coatings deposited by electron beam evaporation

A layer of silver was deposited onto the surface of glass substrates, coated with AZO (Al-doped ZnO), to form Ag/AZO film structures, using e-beam evaporation techniques. The electrical and optical properties of AZO, Ag and Ag/AZO film structures were studied. The deposition of Ag layer on the surface of AZO films resulted in lowering the effective electrical resistivity with a slight reduction of their optical transmittance. Ag (11 nm)/AZO (25 nm) film structure, with an accuracy of ±0.5 nm for the thickness shows a sheet resistance as low as 5.6 ± 0.5 Ω/sq and a transmittance of about 66 ± 2%. A coating consisting of AZO (25 nm)/Ag (11 nm)/AZO (25 nm) trilayer structure, exhibits a resistance of 7.7 ± 0.5 Ω/sq and a high transmittance of 85 ± 2%. The coatings have satisfactory properties of low resistance, high transmittance and highest figure of merit for application in optoelectronics devices including flat displays, thin films transistors and solar cells as transparent conductive electrodes.     

Structure and stability of Sb/Au(1 1 0)-c(2 × 2) surface phase

Adsorption of 0.5 monolayers (ML) of Sb on the Au(1 1 0) surface resulted in the formation of a c(2 × 2) surface reconstruction. Analysis of surface X-ray diffraction data by a direct method revealed the existence of an ordered substitutional surface alloy, with every other hollow site occupied by Au and Sb atoms. Quantitative conventional χ² refinement showed a contraction of 0.12 ± 0.03 Å in the spacing of the first Au layer to the second, an expansion of 0.13 ± 0.03 Å in the second-to-third layer distance, and an inward Sb displacement (rumpling) of 0.21 ± 0.04 Å. This surface phase proved to be extremely robust, with the long-range order of this arrangement remaining up to substrate temperatures of 900 K.     

Lattice-resolution imaging of the sapphire (0 0 0 1) surface in air by AFM

Lattice-resolution images of single-crystal α-alumina (sapphire) (0 0 0 1) surfaces have been obtained using contact-mode AFM under ambient conditions. It was found that the hexagonal surface lattice has a periodicity of 0.47 ± 0.11 nm, which is identical to that reported previously when the same surface was imaged in water. Large lattice corrugations (as high as 1 nm) were observed, but were concluded to be imaging artifacts because of the strong friction which causes additional deflection of the cantilever. The additional deflection of the cantilever is registered by the detector of the optical beam-deflection AFM resulting in an overestimation of the height at each lattice point. Abrupt changes were also resolved in the topography including honeycomb patterns and a transition from 2D lattices to 1D parallel stripes, with scanning direction. These phenomena can be explained by the commensurate sliding between the tip and sapphire surface due to the strong contact force.     

Self-assembled germanium nano-clusters on silver(1 1 0)

The adsorption of germanium on Ag(1 1 0) has been investigated by scanning tunnelling microscopy (STM), as well as surface X-ray diffraction (SXRD). At 0.5 germanium monolayer (ML) coverage, Low Energy Electron Diffraction (LEED) patterns reveals a sharp c(4 × 2) superstructure. Based on STM images and SXRD measurements, we present an atomic model of the surface structure with Ge atoms forming tetramer nano-clusters perfectly assembled in a two-dimensional array over the silver top layer. The adsorption of the germanium atoms induces a weak perturbation of the Ag surface. Upon comparison with results obtained on the (1 1 1) and (1 0 0) faces, we stress the role played by the relative interactions between silver and germanium on the observed surface structures.     

Retardation calculation for achromatic and apochromatic quarter and half wave plates of gypsum based birefringent crystal

This paper presents retardation calculations for achromatic and apochromatic half and quarter wave retarders of gypsum based birefringent crystal. The calculations indicate that an achromatic wave plates can be obtained by combining gypsum crystal with KDP, ADP, MgF₂, sapphire and calcite birefringent crystals. The residual variation percentages of retardations as a function of wavelength for gypsum/KDP, gypsum/ADP, gypsum/MgF₂, gypsum/sapphire and gypsum/calcite were found to be ± 1.7%, ± 3%, ± 12.2%, ± 12.0% and ± 7.2%, respectively. To reduce the spectral variation of retardations, a third layer (apochromatic) of birefringet material is added to the aforementioned achromatic wave plates. The proposed apochromatic wave plates are gypsum/KDP/quartz, gypsum/ADP/quartz, MgF₂/ADP/gypsum, MgF₂/KDP/gypsum and gypsum/sapphire/MgF₂. The addition of a third layer has reduced spectral residual variation percentages of retardations of the aforementioned apochromatic designs to ± 0.27, ± 0.33, ± 0.3, ± 0.17 and ± 0.45, respectively.     

Initial stages of hydroxide formation and its reduction on Co(0 0 0 1) studied by in situ STM and XPS in 0.1 M NaOH

In situ electrochemical scanning tunneling microscopy (STM) has been applied to study the initial stages of hydroxide formation and its reduction on Co(0 0 0 1) in 0.1 M NaOH. XPS investigations give chemical information about the adlayer composition after oxidation and at the different reduction stages. In the subpotential range of oxidation at E<−0.55 V (SHE) the formation of a Co(OH)₂(0 0 0 1) superstructure is observed. It shows a hexagonal symmetry with an average periodicity of P=1.25±0.20 nm. The coincidence cell of the observed structure consists of 16 unit cells Co(OH)₂(0 0 0 1) showing an average lattice parameter of a=0.33±0.05 nm and thus the Co(OH)₂ monolayer forms a 5 × 5 superstructure with respect to the underlying metallic Co(0 0 0 1) substrate. XPS results clearly prove the presence of hydroxide and exclude the formation of CoO in the subpotential range.At the very beginning of the reduction process small two-dimensional metal clusters and islands can be observed. It is assumed that they are crystallization nuclei for metal formation. They enlarge and grow together with other islands or larger terraces. During this reduction process two-dimensional adatomic arrays consisting of OH⁻-Co²⁺- OH⁻ trimers appear on the surface. Some of these trimers accumulate at step edges, and finally decorate them. This decoration builds up an energy barrier for further metal incorporation and prevents further growth of the terraces with remaining metal clusters on their surfaces. The reduction of the Co(OH)₂ layer is found to be not completed which is confirmed by XPS results.     

Interface evolution during electrochemical oxidation-dissolution

We present results from an experimental study on the roughening of Al thin film during electrochemical oxidation reduction. The surface reaction occurred in two stages. Anodic alumina forms during oxidation of aluminum followed by immediate dissolution of alumina. The surface image using AFM showed randomly oriented grains with lateral feature size ∼280 nm at early stage (30 s) of oxidation-dissolution (OD). As farther dissolution of alumina (90 s) progressed, oriented rectangular grains were observed with lateral feature size ∼400 nm, indicating a disordered to ordered transition at the surface. The roughness exponent at the earlier stage found to be 0.44 ± 0.02, consistent with nonlinear KPZ equation. However, for the later case, roughness exponent increased to 0.84 ± 0.03, which is close to the value derived in continuum model. The value of dissolution exponent (growth exponent) β found to be 0.47 ± 0.1. These values are slightly different from the theoretical values but they are consistent with the theoretical models within the experimental error. Shadow instability found to be a dominant feature in this experiment and contributed to the discrepancy. Interface instabilities are discussed in terms of local and non-local effects.     

Recreational runners with patellofemoral pain exhibit elevated patella water content

Increased bone water content resulting from repetitive patellofemoral joint overloading has been suggested to be a possible mechanism underlying patellofemoral pain (PFP). To date, it remains unknown whether persons with PFP exhibit elevated bone water content. The purpose of this study was to determine whether recreational runners with PFP exhibit elevated patella water content when compared to pain-free controls. Ten female recreational runners with a diagnosis of PFP (22 to 39 years of age) and 10 gender, age, weight, height, and activity matched controls underwent chemical-shift-encoded water-fat magnetic resonance imaging (MRI) to quantify patella water content (i.e., water-signal fraction). Differences in bone water content of the total patella, lateral aspect of the patella, and medial aspect of the patella were compared between groups using independent t tests. Compared with the control group, the PFP group demonstrated significantly greater total patella bone water content (15.4 ± 3.5% vs. 10.3 ± 2.1%; P = 0.001), lateral patella water content (17.2 ± 4.2% vs. 11.5 ± 2.5%; P = 0.002), and medial patella water content (13.2 ± 2.7% vs. 8.4 ± 2.3%; P < 0.001). The higher patella water content observed in female runners with PFP is suggestive of venous engorgement and elevated extracellular fluid. In turn, this may lead to an increase in intraosseous pressure and pain.     

Highly resolved scanning tunneling microscopy study of Si(0 0 1) surfaces flattened in aqueous environment

A surface preparation method with fine SiO₂ particles in water is developed to flatten Si(0 0 1) surfaces on the nanometer scale. The flattening performance of Si(0 0 1) surfaces after the surface preparation method is investigated by scanning tunneling microscopy. The observed surface is so flat that 95% of the view area (100 × 100 nm²) is composed of only three atomic layers, namely, one dominant layer occupying 50% of the entire area and two adjacent layers. Furthermore, a magnified image shows the outermost Si atoms regularly distributed along the 〈1 1 0〉 direction on terraces.     

Nucleation, coarsening and kinetic scaling of two-dimensional islands on GaSb(0 0 1)

Using a combination of molecular beam epitaxy and in situ surface X-ray diffraction, we investigate the nucleation and coarsening of monolayer high islands on GaSb(0 0 1) during deposition in real time. We find an activation energy for island nucleation of 1.55 ± 0.16 eV, indicating a stable nucleus size larger than two atoms. For intermediate temperatures where GaSb homoepitaxy is stable, the lateral coarsening of the islands after deposition is described by Ostwald ripening. The average island sizes during coarsening are isotropic, although with different size distributions in different directions. The size distributions do not change during coarsening, implying kinetic scaling.     

Enhanced field ionization of water adsorbed on a carbon monoxide-covered, platinum field emitter tip

The influence of carbon monoxide, adsorbed on a platinum field emitter tip, on field ionization of adsorbed water was examined. Ramped field desorption (RFD) measurements of water ionization were performed at 108 K for water layer thicknesses up to 80 ML on a clean or CO-saturated tip surface. In RFD the applied field is ramped linearly in time until water ionization is detected, giving the onset field of ionization. Water ionization yields hydrated hydroxide ions and protons; the hydroxide ions remain within the water layer on the tip, while the hydrated protons are emitted into vacuum. At a low water coverage of 1.5 ML, the CO adlayer substantially reduced the onset field of ionization (that is, facilitated ionization) of water by 40%, from a value of 0.43 V/Å for water on clean Pt to 0.26 V/Å for water on CO-covered Pt. The extent of the reduction gradually diminished with thicker coverages of water and was absent at coverages of 20 ML or greater. The characteristic decay length of the field enhancement was 4.7 ± 1 ML. The results were analyzed with the charge exchange model of ionization kinetics and changes in dipole moments of water adsorbed without and with CO. The analysis reveals that a change in water structure (dipole moment) caused by CO is an important contributor in field enhancement and that the dipole moment for hydrated hydroxide ion in an ice-like layer must be greater than that for bulk ice-like water. The significance of these results with respect to electrochemical oxidation of CO is discussed.     

Molecular beam epitaxy of organic films investigated by high resolution low energy electron diffraction (SPA-LEED): 3,4,9,10-perylenetetracarboxylicacid-dianhydride (PTCDA) on Ag(1 1 1)

A detailed investigation of the multilayer growth of PTCDA on Ag(1 1 1) by high resolution LEED (SPA-LEED) is reported. The first two monolayers are closed and exhibit a structure, which is commensurate with respect to the underlying Ag(1 1 1) surface. The lattice parameters are close to those of the (1 0 2) plane of the β bulk phase of PTCDA, with deviations ?2%. The vertical stacking of the second layer with respect to the first monolayer (observed at 300 K) corresponds to that in the β bulk phase of PTCDA. At high growth temperatures (400 K), Stranski-Krastanov growth occurs from the third monolayer onward, and PTCDA clusters, preferentially with few well defined facets, grow. The structure of the clusters is that of the thermodynamically more stable α bulk phase of PTCDA. Contrary, at low growth temperatures (200 K), the growth proceeds in the Frank van der Merve mode, with several open layers. From slope selection there is evidence for an Ehrlich-Schwoebel barrier. The lateral packing of the PTCDA grown at low temperatures corresponds within error to that of the β bulk phase. The low temperature structure and morphology is meta-stable. Short annealing at 300 K flattens the PTCDA film, and prolonged annealing at 400 K causes the film to adapt the structure and morphology obtained directly at 400 K growth temperature. Presumably, the formation of layers with a β-phase-like lattice at low temperature is due to the better fit of the β phase, compared to the α phase lattice, to the underlying commensurate monolayer. However, at high growth temperatures, the thermodynamically more stable α phase grows, reducing the area of lattice misfit to the underlying commensurate first two layers by formation of clusters.     

A study of water releases in ground (GCC) and precipitated (PCC) calcium carbonates

Precipitate calcium carbonates (PCCs) are important industrial products mainly used as fillers. Because of their regular, synthesized characteristics (e.g. grain shape or grain size distribution) PCCs are distinct from natural ground calcium carbonates (GCCs). A thermal study on GCC samples showed only the presence of surface physisorbed water with a monotonic weight loss up to the carbonate decomposition. In the case of PCC samples, two supplementary water releases were observed. The first one appeared at around 525 K and the second one at around 725 K. The nature of the water present in two different PCC samples was investigated by thermal analyses (thermogravimetric and Karl Fischer analyses), Rietveld analyses on X-rays powder diffraction, infrared and Raman spectroscopies and solid state ¹H MAS NMR. The second water release at about 725 K was clearly identified as being portlandite dehydration. Ca(OH)₂ was present in the PCC in an amorphous state. Its crystallization occurred simultaneously to the first water release at about 525 K. Structural effects observed on calcite during the first water release led to the assignment to structural water molecules inserted in the structure of calcite.     

Facile method to prepare lotus-leaf-like super-hydrophobic poly(vinyl chloride) film

A simple new approach was developed to obtain a super-hydrophobic PVC film from a natural lotus leaf using the nanocasting method. SEM shows that compared with a common smooth PVC film, a lotus-leaf-like surface structure was clearly observed on the super-hydrophobic PVC film. The water contact angle and rolling-off angle on the as-prepared lotus-leaf-like PVC film were 157 ± 1.8° and 3 ± 0.6°, respectively. The samples were kept at temperatures between 5 and 40 °C in the ambient atmosphere for 2 months, and no decrease in water contact angle was observed, nor was contamination observed.     

Nanocrystalline nickel films with lotus leaf texture for superhydrophobic and low friction surfaces

Nanostructured Ni films with high hardness, high hydrophobicity and low coefficient of friction (COF) were fabricated. The surface texture of lotus leaf was replicated using a cellulose acetate film, on which a nanocrystalline (NC) Ni coating with a grain size of 30 ± 4 nm was electrodeposited to obtain a self-sustaining film with a hardness of 4.42 GPa. The surface texture of the NC Ni obtained in this way featured a high density (4 × 10³ mm⁻²) of conical protuberances with an average height of 10.0 ± 2.0 μm and a tip radius of 2.5 ± 0.5 μm. This structure increased the water repellency and reduced the COF, compared to smooth NC Ni surfaces. The application of a short-duration (120 s) electrodeposition process that deposited “Ni crowns” with a larger radius of 6.0 ± 0.5 μm on the protuberances, followed by a perfluoropolyether (PFPE) solution treatment succeeded in producing a surface texture consisting of nanotextured protuberances that resulted in a very high water contact angle of 156°, comparable to that of the superhydrophobic lotus leaf. Additionally, the microscale protuberances eliminated the initial high COF peaks observed when smooth NC Ni films were tested, and the PFPE treatment resulted in a 60% reduction in the steady-state COFs.     

Adsorbate-substrate bonding and the growth of naphthalene thin films on Ag(1 1 1)

The adsorption kinetics, energetics and growth of naphthalene thin films, from submonolayer to about 10 layers, on a Ag(1 1 1) surface at low temperature in a ultrahigh vacuum chamber are examined by using temperature programmed desorption spectroscopy. The first layer adsorption occurs with a desorption energy of 85 ± 5 kJ/mole and results in an interface dipole of 5 ± 1 D, from charge transfer of approximately 0.2 e from naphthalene to Ag. The surface dipole induced inter-adsorbate repulsion causes the lowering of the adsorption energy within the first layer near the saturation coverage so that the second layer deposition begins before the completion of the first layer. The second layer is a metastable phase with desorption energy, 74 ± 3 kJ/mole, smaller than the multilayer desorption energy of 79 ± 5 kJ/mole. Fractional order desorption kinetics were found for both the metastable and the multilayer phases, suggesting desorption from 2-D islanding and 3-D islanding, respectively.