Synthesis, characterization, and applications in Heck and Suzuki coupling reactions of amphiphilic cyclopalladated ferrocenylimines

A series of novel amphiphilic ferrocenylimines and their cyclopalladated complexes of general formula [Fe(η⁵-C₅H₅)(η⁵-C₅H₄CR₁NR₂)] (R₁=H, R₂=C₁₂H₂₅-n4a, R₁=H, R₂=C₁₆H₃₃-n4b, R₁=CH₃, R₂=C₁₂H₂₅-n4c, R₁=CH₃, R₂=C₁₆H₃₃-n4d), [PdCl{[(η⁵-C₅H₅)]Fe[(η⁵-C₅H₃)CR₁NR₂]}]₂ (5a-d), [PdCl{[(η⁵-C₅H₅)]Fe[(η⁵-C₅H₃)-CR₁NR₂]}(PPh₃)] (6a-d), were prepared and characterized by ¹H NMR, ¹³C NMR, ³¹P NMR, IR, HRMS, and elemental analysis. The crystal structures of 5c,d were determined by X-ray crystallography. These amphiphilic cyclopalladated complexes are thermally stable and insensitive to oxygen and moisture. The redox properties of 4a-d, 5a-d, 6a-d were also investigated using cyclic voltammetric technique. Compounds 5a-d, 6a-d displayed good activity in the Heck reaction of a variety of aryl halides with ethyl acrylate or styrene and the Suzuki-Miyaura cross-coupling reaction of aryl bromides with phenylboronic acid in bulk solution. They are also suitable for formation of Langmuir-Blodgett (LB) films.     

Supramolecular nanostructured assemblies of different types of porphyrins with fullerene using TiO2 nanoparticles for light energy conversion

TiO₂ nanoparticles were modified with porphyrin derivatives, 5-[4-benzoic acid]-10,15,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (Ar-H₂P-COOH), 5-[4-benzoic acid]-10,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (H-H₂P-COOH), and 5,10,15,20-tetra[4-benzoic acid]-21H,23H-porphyrin (H₂P-4COOH). The porphyrin-modified TiO₂ nanoparticles were deposited on nanostructured OTE/SnO₂ electrode together with nanoclusters of fullerene (C₆₀) in acetonitrile-toluene (3/1, v/v) using an electrophoretic deposition technique to afford the porphyrin-modified TiO₂ composite electrode denoted as OTE/SnO₂/(porphyrin-modified TiO₂ nanoparticle+C₆₀)_n. The porphyrin-modified TiO₂ composite electrodes have efficient light absorbing properties in the visible region, exhibiting the photoactive response under visible light excitation using redox couple. The incident photon-to-photocurrent efficiency (IPCE) values of supramolecular nanostructured electrodes of porphyrin-modified TiO₂ nanoparticles with fullerene [OTE/SnO₂/(Ar-H₂P-COO-TiO₂+C₆₀)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂+C₆₀)_n] are much larger than those of the reference systems of porphyrin-modified TiO₂ nanoparticles without C₆₀ [OTE/SnO₂/(Ar-H₂P-COO-TiO₂)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂)_n]. In particular, the maximum IPCE value (41%) is obtained for OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n under the bias potential of 0.2 V versus SCE. This indicates that the formation of supramolecular complexes between porphyrins and fullerene on TiO₂ nanoparticles plays an important role in improvement of the light energy conversion properties.     

Synthesis,crystal structure and spectroscopic characterization of new neutral and cationic (η-p-cymene)–ruthenium(II) complexes with phosphine–amide ligands

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with the phosphino-amides o-Ph₂P–C₆H₄CO–NH–R [R = ⁱPr (a), Ph (b), 4-MeC₆H₄ (c), 4-FC₆H₄ (d)] to give the mononuclear compounds 1a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)]Cl. The subsequent reaction of these complexes with KPF₆ produced the cationic species 2a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)][PF₆] in which phosphino-amides also act as rigid P,O-chelating ligands. The molecular structures of 2b–d were determined crystallographically. Amide deprotonation is achieved when complexes 2a–d were made react with 1 M aqueous solution of KOH, affording the corresponding neutral species 3a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–N–R)] in which a P,N-coordination mode is suggested.     

Synthesis and structure of {{amino(triorganosilyl)carbene}pentacarbonyltungsten(0)} complexes and attempted synthesis of {[2-bis(trimethylsilyl)methyl-3-triorganosilyl-2H-azaphosphirene-κP]pentacarbonyltungsten(0)}

First examples of tungsten aminocarbene complexes [(OC₅)W{C(SiR¹_nR²_3-n)NH₂}] 2a-d (R¹ = Ph, R² = Me) were synthesized via ammonolysis of the corresponding methoxycarbene complexes 1a-d. They were characterized by NMR spectroscopy, MS, IR, UV/Vis and elemental analysis, and in the case of the C-triphenylsilyl derivative 2a by single-crystal X-ray structure analysis. The reaction of P-chloro alkylidenephosphane 3 with complexes 2a-d, meant to give 2H-azaphosphirene complexes, was monitored by ³¹P NMR spectroscopy to reveal the formation of the products 4-7, which were presumably formed via decomposition of the transient complexes 10a-d.     

Alternative synthesis and novel oxidizing ability of 6,9-disubstituted cyclohepta[b]pyrimido[5,4-d]pyrrole-8(6H),10(9H)-dione derivatives

Synthesis of 6,9-disubstituted cyclohepta[b]pyrimido[5,4-d]pyrrole-8(6H),10(9H)-diones 7a-g was accomplished by ring opening and ring closure sequences of 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8,10(9H)-dione derivatives induced by several amines. Furthermore, alternative synthetic methodology for compounds 7a-e was also accomplished by single-step reaction of 2-chlorotropone with 6-aminouracil derivatives under mild conditions. X-ray crystal analysis of 7a was carried out to clarify the structural characteristics. The properties of 7a-e were studied by the UV-vis spectra and reduction potentials (−1.24 to −1.39 V vs Ag/AgNO₃). Novel photo-induced oxidation reaction of 7a-d toward some amines under aerobic conditions was carried out to give the corresponding imines in more than 100% yield [based on compounds 7a-d], suggesting the oxidation reaction occurs in an autorecycling process.     

Aluminum and zinc complexes supported by functionalized phenolate ligands: Synthesis, characterization and catalysis in the ring-opening polymerization of ε-caprolactone and rac-lactide

A series of aluminum and zinc complexes supported by functionalized phenolate ligands were synthesized and characterized. Reaction of 2-(3,5-R₂C₃N₂)C₆H₄NH₂ (R = Me, Ph) with salicylaldehyde or 3,5-di-tert-butylsalicylaldehyde afforded 2-((2-(1H-pyrazol-1-yl)phenylimino)methyl)phenol derivatives 2a-2d. Treatment of 2a-2d with an equiv. of AlR²₃ (R² = Me, Et) gave corresponding aluminum aryloxides 3a-3e, while reaction with an equiv. of ZnEt₂ afforded zinc aryloxides 4a-4d. Treatment of 2c with 0.5 equiv. of ZnEt₂ formed diphenolato zinc complex 5. All new compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses. The structures of complexes 3a, 4a and 5 were further characterized by single crystal X-ray diffraction techniques. The catalytic activity of complexes 3-5 toward the ring-opening polymerization of ε-caprolactone was studied. The zinc complexes (4a-4d) exhibited higher catalytic activity than the aluminum complexes (3a-3e). The diphenolato zinc complex 5 showed lower catalytic activity than the ethylzinc complexes 4a-4d. The aluminum complex (3b) is inactive to initiate the ROP of rac-lactide, while the zinc complex (4d) is active initiator for the ROP of rac-lactide, giving atactic polylactide.     

Efficient and regioselective chromium(0)-catalyzed reaction of 2-substituted furans with diazo compounds: stereoselective synthesis of (2E,4Z)-2-aryl-hexadienedioic acid diesters

Pentacarbonyl(η²-cis-cyclooctene)chromium(0) (1) catalyzes efficiently reactions of diazo compounds with electron-rich furans. The reaction of 2-methoxyfuran (2) with alkyl α-diazoarylacetate (3a-g) furnishes the (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g) in excellent yields. These reactions are highly regioselective. The cyclopropanation intermediates formed from 1 and diazo compounds 3a-g always arise from a carbene addition to the less substituted CC bond of 2. The resulting cyclopropanation product undergoes a ring opening reaction to form the corresponding (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g). The pentacarbonylchromium(0)-catalyzed reactions of 2-alkylfuran (5a-b) with ethyl α-diazophenylacetate (3a) and 9-diazo-9H-fluorene (3h) produce the 1(E),3(E)-butadienes (6a-d) in very good yields.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

Gallic esters of 4,5-dinitrocatechol as potential building blocks for thermotropic liquid crystals

A series of unsubstituted and 1,4-disubstituted gallic catecholates 1, 6 and 7 as possible candidates for wedge-shaped mesogens were prepared starting from the respective benzene derivatives 2a-c and gallic esters 5a-h. The mesomorphic properties were investigated by DSC. However, only the 4,5-dinitro derivatives 1d,f-h with C₈H₁₇ and C₁₀H₂₁ to C₁₂H₂₅ alkyl side chains displayed mesophases, as evaluated by fluidity and optical anisotropy.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Unexpected conversion of a polycyclic thiophene to a macrocyclic anhydride

Oxygenation of 2,5,9,12-tetra(tert-butyl)diacenaphtho[1,2-b:1′,2′-d]-thiophene (1, C₄₀H₄₄S) by peracids gave the cyclic sulfonic ester 4 (2,7,10,13-tetra(tert-butyl)diacenaphtho[1,2-c:1′,2′-e]oxathiin 5,5-dioxide, C₄₀H₄₄O₃S) which, when heated in nitrobenzene, is converted into a complex, macrocyclic anhydride 3 (C₈₀H₈₈O₃), which is derived from two molecules of 4. Further investigation found a likely intermediate in this reaction, 4,4′,7,7′-tetra(tert-butyl)-1,1′-biacenaphthylenylidene-2,2′-dione (5, C₄₀H₄₄O₂), apparently formed from 4 by additional oxidation. Anhydride 3 plausibly arises by Diels-Alder reaction of 4 and 5 followed by several ring fragmentations. The structures of 3, 4, and 5 were unambiguously established by X-ray crystallography.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Solvent-free reactions of fullerenes and N-alkylglycines with and without aldehydes under high-speed vibration milling

The solvent-free reactions of fullerenes and N-alkylglycines with and without aldehydes (RCHO) 2a-e under high-speed vibration milling (HSVM) conditions have been investigated. Fulleropyrrolidines 4a-e (C₆₀(CH₂N(CH₃)CHR), R=H (4a), C₆H₅ (4b), p-NO₂-C₆H₄ (4c), p-CH₃O-C₆H₄ (4d), p-(CH₃)₂N-C₆H₄ (4e)) were obtained in moderate yields from reactions of C₆₀ with aldehydes 2a-e and N-methylglycine (Prato reaction). In all these solvent-free reactions, 4a was found to be formed besides 4b-e, indicating that fullerenes can react with N-substituted glycines in the absence of aldehyde to give fulleropyrrolidines. For this novel reaction, a possible reaction mechanism involving an electron transfer process has been proposed. Intrigued by this observation, the dependence of the yield on the reagent ratio for the reaction of C₆₀ with paraformaldehyde and/or N-methylglycine was examined to search the optimal conditions. The reaction of C₇₀ with paraformaldehyde and/or N-methylglycine under HSVM conditions was also studied and was found to give the positional isomers of [70]fulleropyrrolidines.     

Synthesis and reactions of 3-alkylsulfanyl-1,3-dihydro-2,1-benzisothiazole 2,2-dioxides

Alkyl- and arylsulfanylation of 1,3-dihydro-2,1-benzisothiazole 2,2-dioxides (benzosultams) 1a-c and pyridosultam 1d with dialkyl and diaryl disulfides provides dithioacetals of 2-aminobenzaldehydes 6-13. 1,3-Dimethylbenzosultam 19 with disulfides forms 3-alkyl(aryl)sulfanyl-1,3-dimethylbenzosultams 20-22 that undergo thermal extrusion of SO₂ followed by a [1,5] sigmatropic hydrogen shift in the intermediate aza-ortho-xylylene leading to 1-arylvinyl sulfides 24-26. Tandem alkylation-sulfanylation of benzo- and pyridosultams 1a-d with 4-bromobutyl thiocyanate gives tetrahydrothiopyrano-spiro-benzosultams 27-30 that, after extrusion of SO₂ and [1,5] hydrogen shift, form 2-aryl-5,6-dihydro-4H-thiopyrans 32-35. Alkylation of pyridosultam 1d with 3-chloropropyl thiocyanate leads directly to 2-pyrido-3,4-dihydrothiophene derivative 37.     

Domino routes to substituted benzoindolizines: tandem reorganization of 1,3-dipolar cycloadducts of nitrones with allenic esters/ketones and alternative cycloaddition-palladium catalyzed cyclization pathway

Reactions of C-(4-oxo-4H[1]benzopyran-3-yl)-N-phenyl nitrones (7) with allenic esters (8a-c) and allenic ketones (18a-d) furnish benzoindolizines (9a-k, 19a-d) in good yields. The formation of benzoindolizines is postulated to involve regioselective addition of 1,3-dipole to C2-C3 π bond of allenic esters/ketones followed by domino transformation of the cycloadducts, which involve an intramolecular aza Diels-Alder reaction in the intermediate C. DFT calculations of various parameters for diene and dienophile components in the proposed intermediate C have revealed that conformational constraints imposed by the alkyl groups (R=Me, Et) favor intramolecular aza-Diels-Alder cycloaddition. An alternative domino route to benzoindolizines (9a,d,g) involving sequential one-pot cycloaddition of azadienes (22a-c) with silyl-enol ether (23) followed by palladium(0)-catalyzed Heck coupling reaction has also been developed. Both these approaches represent novel domino routes for the synthesis of benzoindolizines.     

Chiral β-diketonate ligands of ‘pseudo planar chiral’ topology: enantioselective synthesis and transition metal complexation

A practical enantioselective synthesis of chiral β-diketonate ligands 1a-1d, which are of ‘pseudo planar-chiral’ topology, is described. Additionally, the first chiral bis(diketonates) 2a-2c, ligands of C₂-symmetry that are isoelectronic with respect to related salen ligand systems, have been prepared. Protocols for the metallation of ligands 1a-1d, 2b and 2c are reported.     

Synthesis, characterization and structural studies of diorganotin(IV) complexes with Schiff base ligand salicylaldehyde isonicotinylhydrazone

Eight diorganotin(IV) complexes of salicylaldehyde isonicotinylhydrazone (H₂SalN) R₂Sn(SalN) R = t-Bu 1, Ph 2, PhCH₂3, o-ClC₆H₄CH₂4, p-ClC₆H₄CH₂5,m-ClC₆H₄CH₂6,o-FPhCH₂7, p-FC₆H₄CH₂8 were prepared. All complexes 1-8 have been characterized by elemental, IR, ¹H, ¹³C and ¹¹⁹Sn NMR analyses. The crystal structures of H₂SalN and complex 1 were determined by X-ray crystallography diffraction analyses. Studies show that H₂SalN is a tridentate planar ligand. For complex 1, the tin atom lies in this plane and forms a five- and six-membered chelate ring with the tridentate ligand. A comparison of the IR spectra of the ligand with those of the corresponding complexes, reveals that the disappearance of the bands assigned to carbonyl unambiguously confirms that the ligand coordinate with the tin in the enol form.     

Catalytic oxidation of diorganotin(IV) carboxylates to mixed-ligand monoalkyltin(IV) carboxylates by Ag and structure characterization of the mixed-ligand monoalkyltin(IV) 2-pyridinecarboxylate (2-ClPhCH2)Sn(2-ClPhCO2)(O2CC5H4N-2)2

The complexes of the type (ArCH₂)₂SnO were catalytic-oxygenated by Ag⁺ and yielded mixed-ligand organotin(IV) complexes (ArCH₂)(2-C₅H₄NCO₂)₂(ArCOO)tin(IV) (Ar = C₆H₅ (1), 2-ClC₆H₄ (2), 2-CNC₆H₄ (3), 4-ClC₆H₄ (4), 4-CNC₆H₄ (5), 2-FC₆H₄ (6)). The complexes 1-6 are characterized by elemental analyses, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopies. Single X-ray crystal structure analysis has been determined, which reveals that the center tin atom of complex 2 is seven-coordinated geometry.