Formation of appropriate sites on nanofiltration membrane surface for binding TiO2 photo-catalyst: Performance, characterization and fouling-resistant capability

Titanium dioxide (TiO₂) nanoparticles were assembled on the surface of nanofiltration blend membrane. For settling TiO₂ on the membrane surface, two membrane categories were used: (i) unmodified polyethersulfone (PES)/polyimide (PI) blend membrane, and (ii) –OH functionalized PES/PI blend membrane with different concentrations of diethanolamine (DEA). These membranes were radiated by UV light after TiO₂ depositing with different concentrations. 15 min immersion in colloidal suspension and 15 min UV irradiation with 160 W lamps were used for modification. The modification resulted in the formation of a photo-catalytic property with enhanced membrane hydrophilicity. The self-assembly of TiO₂ nanoparticles was established through coordinance bonds with –OH functional groups on the membrane surface. A comparison between the UV irradiated TiO₂ deposited blend membrane and deposited-functionalized blend membranes showed that –OH groups originate excellent adhesion of TiO₂ nanoparticles on the membrane surface, increase reversible deposition, and diminish irreversible fouling. The membranes were characterized using SEM, FTIR, EDX, contact angle, cross flow filtration, and antifouling measurements. SEM images show that the presence of –OH groups on the DEA-modified membrane surface is the main parameter for extra uniformly settlement of TiO₂ nanoparticles on the membrane surface. This procedure is a superior technique for modification of PES/PI nanofiltration membranes to enhance water flux and minimization membrane fouling.     

Exploring the characteristics,performance, and modification of Matrimid for development of thin‐film composite and thin‐film nanocomposite reverse osmosis membranes

Reverse osmosis (RO) membrane technology is widely employed to address the demands for freshwater. In this study, fabrication and performance evaluation of customized RO membranes comprised of Matrimid and polyacrylonitrile (PAN) is carried out. While exploring adoption of slip coating procedure, the effects of various modification techniques including incorporation of TiO₂ nanoparticles and polyethylene glycol (PEG) into the skin layer as well as cross‐linking were investigated. The individual and combined effects of parameters on membrane morphology, surface characteristics and performance were also examined. Despite the distinctive characteristics of involved materials, delamination‐free composite membranes were successfully formed with an intimate contact at the interface of two layers. The results also indicated that increasing concentration of Matrimid in dope solution led to increase in membrane thickness and consequently decline in water flux. In the best case, membrane prepared using 1 wt.% Matrimid in dope exhibited water flux of 0.98 LMH and NaCl rejection of 95.7%. Also, incorporation of 3 wt.% TiO₂ nanoparticles offered membranes with improved water flux of 1.37 LMH and salt rejection of 95.8%. On the other hand, water flux and salt rejection in membranes containing 5 wt.% PEG were 1.18 LMH and 96.2%, respectively. The co‐presence of both nanoparticles and PEG provided more insights about the contributing factors in tuned membranes. Modification of skin layer by cross‐linking significantly improved salt rejection at the expense of water flux. The results are scientifically interpreted and compared to the values reported in literature.     

Fabrication,characterization, and performance evaluation of polyethersulfone/TiO2 nanocomposite ultrafiltration membranes for produced water treatment

In the present work, development of neat and nanocomposite polyethersulfone membranes composed of TiO₂ nanoparticles is presented. Membranes are fabricated using nonsolvent phase inversion process with the objective of improving antifouling, hydrophilicity, and mechanical properties for real and synthetic produced water treatment. Membranes are characterized using scanning electron microscopy, Fourier‐transform infrared, contact angle, porosity measurement, compaction factor, nanoparticles stability, and mechanical strength. The performance of prepared membranes was also characterized using flux measurement and oil rejection. Fourier‐transform infrared spectra indicated that noncovalence bond formed between Ti and polyethersulfone chains. The contact angle results confirmed the improved hydrophilicity of nanocomposite membranes upon addition of TiO₂ nanoparticles owing to the strong interactions between fillers and water molecules. The increased water flux for nanocomposite membranes in comparison with neat ones can be due to coupling effects of improved surface hydrophilicity, higher porosity, and formation of macrovoids in the membrane structure. The membrane containing 7 wt% of TiO₂ nanoparticles was the best nanocomposite membrane because of its high oil rejection, water flux, antifouling properties, and mechanical stability. The pure water flux for this membrane was twice greater than that of neat membrane without any loss in oil rejection. The hydrophilicity and antifouling resistance against oil nominates developed nanocomposite membranes for real and synthetic produced water treatment applications with high performance and extended life span.     

Thermo-responsive and antifouling PVDF nanocomposited membranes based on PNIPAAm modified TiO2 nanoparticles

A novel hydrophilic nanocomposite additive(TiO2-g-PNIPAAm) was synthesized by the surface modification of titanium dioxide(TiO2) with N-isopropylacrylamide(NIPAAm) via "graft-from" technique. And the nanocomposite membrane of poly(vinylidene fluoride)(PVDF)/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis(TGA). Fourier transform infrared attenuated reflection spectroscopy(FTIR-ATR) and X-ray photoelectronic spectroscopy(XPS) characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy(SEM) was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8° of the PVDF membrane to 61.2° of the nanocompostie membrane. Bovine serum albumin(BSA) static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-gPNIPAAm. The maximum BSA adsorption at 40 °C was about 3 times than that at 23 °C. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.     

Preparation and characterization of TiO2/Pebax/(PSf‐PES) thin film nanocomposite membrane for humic acid removal from water

New thin film composite (TFC) membrane was prepared via coating of Pebax on PSf‐PES blend membrane as support, and its application in wastewater treatment was investigated. To modify this membrane, hydrophilic TiO₂ nanoparticles were coated on its surface at different loadings via dip coating technique. The as‐prepared membrane was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), field emission SEM, and contact angle analysis. The Fourier transform infrared spectroscopy analysis and surface SEM images indicated that TiO₂ was successfully coated on the membrane surface. In addition, the results stated that the hydrophilicity and roughness of membrane surface increased by addition of TiO₂ nanoparticles. Performance of TFC and modified TFC membranes was evaluated through humic acid removal from aqueous solution. Maximum permeate flux and humic acid rejection were obtained at 0.03 and 0.01 wt% TiO₂ loadings, respectively. Rejection was enhanced from 96.38% to 98.92% by the increase of feed concentration from 10 to 30 ppm. Additionally, membrane antifouling parameters at different pressures and feed concentration were determined. The results indicated that surface modification of membranes could be an effective method for improvement of membrane antifouling property.     

Effect of TiO2 nanoparticles on structure and properties of high density polyethylene membranes prepared by thermally induced phase separation method

Polyethylene/TiO₂ membranes were fabricated via thermally induced phase separation (TIPS) method. A set of characterization tests including FE‐SEM, EDX, XRD, DSC, TGA, DMA, mechanical test and relative pure water flux for characterization of membranes were carried out to investigate the effect of TiO₂ nanoparticles on membrane properties. The results of EDX, XRD and TGA analyses confirmed the presence of TiO₂ nanoparticles in the polymer matrix. The results of DSC analysis revealed that the melting point as well as the crystallinity of the membranes increased slightly with increasing TiO₂ content. However, the glass transition temperature of the membranes was not affected by the presence of particles. Addition of nanoparticles also increased storage modulus, loss modulus and tensile strength at break of the membranes due to the stiffness improvement effect of inorganic TiO₂. Finally, it was observed that incorporation of the nanoparticles improved pure water flux of the membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of Gemini Surfactant with Modified TiO2 Nanoparticles on the Interfacial Tension of Oil/Water

The research on the impacts of modified TiO₂ nanoparticles (NPs) on interfacial tension (IFT) is in its infancy. Our work focuses on the IFT of the modified TiO₂ and Gemini surfactant N,N,N′,N′-tetramethyl-N,N′-dimyristyl-1,2-ethane diammonium dichlone (YND1233) complex solutions for reservoir stimulation purposes. The factors of YND1233, modified TiO₂ NPs, temperature, aging stability, adsorption loss, and mineralized degree were explored with the comparison of unmodified TiO₂ NPs and YND1233 as contrast samples. The results indicate that the dynamic IFTs decrease and then increase with the concentrations of YND1233 and modified TiO₂ NPs, and the minimum IFT appears at 0.200 and 0.010 wt%, respectively. YND1233/modified TiO₂ complex solutions show lower and more stable IFTs, better temperature resistance, longer aging time, and lower adsorption on the surface of quartz sand. The modified TiO₂ NPs and YND1233 in the YND1233/modified TiO₂ complex solution can be adsorbed to the interface and decrease the IFTs through synergistic effect. A mixed diffusion-kinetic mechanism is provided for the adsorption and interactions with Ca²⁺/Mg²⁺ involved in YND1233/modified TiO₂ complex solution.     

溶胶-凝胶法制备聚砜/二氧化钛有机-无机杂化超滤膜

采用溶胶-凝胶法制备了不同TiO₂含量的PSF/TiO₂杂化超滤膜, 并通过SEM, XRD TG/DTA, 超滤实验, 机械性能测试, 水接触角测试等手段对膜的结构和性能进行了表征. 结果表明: 当TiO₂的质量分数为9.3%时, 膜亚层的指状孔消失, 形成了以纳米TiO₂颗粒为交联点的网络状孔, 同时膜的亲水性、机械性能和热稳定性都有明显的改善, 并在截留滤基本保持不变的情况下, 水通量明显提高. 但过高的TiO₂含量(w≥11.9%)会产生严重的纳米颗粒团聚现象而造成膜的各项性能指标下降.     

LB技术制备SnO2-TiO2无机交替纳米薄膜

采用LB技术将SnO₂纳米粒子和TiO₂纳米粒子组装进花生酸的交替多层膜，通过热处理除去膜中的有机成分后，采用红外光谱、紫外可见光谱、X-光电子能谱、低角X-射线衍射、原子力显微镜以及扫描电子显微镜等手段对处理后的膜进行了形貌、组成和结构表征，表明制得的是SnO₂纳米粒子-TiO₂纳米粒子无机-无机交替的均匀的纳米薄膜。     

Fabrication and characterization of a novel TiO2 nanoparticle self-assembly membrane with improved fouling resistance

A novel TiO₂ nanoparticle self-assembly membrane was prepared based on ultrahigh molecular weight poly(styrene-alt-maleic anhydride)/poly(vinylidene fluoride) (SMA/PVDF) blend membrane. TiO₂ nanoparticle solution was beforehand prepared via the controlled hydrolysis of titanium tetraisopropoxide. The diameter (10 nm or less) and anatase crystal structure were analyzed using transmission electron microscopy (TEM) and X-ray diffraction (XRD). The SMA/PVDF blend membranes prepared by the phase inversion method were immersed into the TiO₂ nanoparticle solution for a week to produce TiO₂ self-assembly membranes. The chemical compositions in membrane surface were analyzed by X-ray photoelectron spectroscopy (XPS). The membrane morphologies were measured by scanning electron microscopy (SEM). Finally, the membrane hydrophilicity, protein anti-fouling property and the molecular weight cutoff (MWCO) were characterized by water contact angle measurement, static protein absorption and filtration experiments, respectively. It is demonstrated that, in comparison to PVDF/SMA blend membrane, the permeability and anti-fouling ability of TiO₂ self-assembly membranes were significantly improved.     

Electrodeposition of Zn–TiO<Subscript>2</Subscript> nanocomposite films—effect of bath composition

Zn–TiO₂ nanocomposite films were prepared by pulsed electrodeposition from acidic zinc sulphate solutions on a Ti support. The influence on the composite structural and morphological characteristics of Zn²⁺ and TiO₂ concentrations in the deposition bath has been investigated. The characterisation of the samples was made by X-ray diffraction and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDS). For all the obtained coatings, the anatase and rutile phases’ most intense diffraction lines were observed between 24° and 28° 2θ, confirming the formation of the Zn–TiO₂ nanocomposite. X-ray diffraction data show that the presence of the TiO₂ nanoparticles plays a remarkable influence on the preferred orientation of the metal matrix. For the more diluted solution, a dependence between the metallic matrix grain size and the concentration of TiO₂ in bath is observed. The grain size decreases with the increasing on the nanoparticle amounts. The SEM results for Zn and Zn–TiO₂ deposits indicate that the nanoparticles have a strong influence on the deposit surface morphology, which is caused by the changes on the deposition mechanism.     

Cellulose acetate nanocomposite ultrafiltration membranes tailored with hydrous manganese dioxide nanoparticles for water treatment applications

Hydrous manganese dioxide (HMO) nanoparticles incorporated cellulose acetate (CA) composite ultrafiltration (UF) membranes are prepared with the aim of improving the water permeation and BSA contaminant removal. The HMO nanoparticles are synthesized from manganese ion and characterized by FT‐IR, XRD, and FESEM. The effect of variation of HMO on CA membranes is probed using FT‐IR, EDAX, contact angle, SEM, and AFM analysis to demonstrate their chemical functionality, hydrophilicity, and morphology. CA/HMO membranes are showing the enhancement in pure water flux (PWF), water uptake, porosity, hydrophilicity, fouling resistance, BSA rejection, and flux recovery ratio (FRR). CA‐1 membrane displayed higher PWF (143.6 Lm²h^?1), BSA rejection (95.9%), irreversible fouling (93.3%), and FRR (93.3%). Overall results confirmed that the CA/HMO nanocomposite UF membranes overcome the bottlenecks and shows potential for water treatment applications.     

Fabrication of blend hydrophilic polyamide imide (Torlon®)-sulfonated poly (ether ether ketone) hollow fiber membranes for oily wastewater treatment

Blend hydrophilic polyamide imide (PAI)-sulfonated poly (ether ether keton) (SPEEK) hollow fiber membranes were fabricated for oil-water emulsion separation. The structure and performance of the membranes were examined by FESEM analysis, N₂ permeation, overall porosity, collapsing pressure, water contact angle, pure water flux, molecular weight cutoff (MWCO), and oil rejection tests. By studying ternary phase diagrams of polymer/solvent-additive/water system, the higher phase-inversion rate was confirmed for the solutions prepared at higher PAI/SPEEK ratio. A more open structure with larger finger-likes was observed by increasing PAI/SPEEK ratio. Mean pore size of 81 nm, overall porosity of 79% and water contact angle of 58° were obtained for the improved membrane prepared by PAI/SPEEK ratio of 85/15. Increasing SPEEK ratio resulted in lower mechanical stability in terms of collapsing pressure. Pure water flux of about 2.5 times of the plain PAI membrane was found for the improved membrane. MWCO of 460 kDa was found for the improved blend membrane. From oil rejection test, all the membranes demonstrated an oil rejection of over 95%. The improved membrane showed a lower rate of permeate flux reduction compared to the plain membrane which was related to the smaller fouling possibility. Less fouling resistance of the improved membrane was related to the higher flux recovery ratio (about 92%). For all the membranes, the dominant fouling mechanism was found to be the cake filtration. The improved PAI-SPEEK hollow fiber membranes was found to be practical for ultrafiltration of oily wastewaters.     

Au改性TiO2纳米复合物对人结肠癌细胞的光催化杀伤作用

提出了通过TiO₂表面修饰纳米Au的方法来提高纳米TiO₂光催化杀伤癌细胞的效率. 采用化学还原法合成了Au改性的TiO₂ (Au/TiO₂)纳米复合物, 并研究了不同掺杂量(1 wt%, 2 wt%, 4 wt%)的Au/TiO₂对人结肠癌LoVo细胞的光催化杀伤效应. 结果显示, Au的掺杂大大地提高了TiO₂纳米粒子光催化杀伤结肠癌LoVo细胞的效率, 而且Au掺杂量的高低影响Au/TiO₂光催化杀伤癌细胞的效率, 掺金量为2%的Au/TiO₂对结肠癌LoVo细胞具有最高的光催化杀伤效率. 在光强为1.8 mW/cm²的紫外灯(λ_max＝365 nm)下光照110 min, 50 μg/mL掺金量为2%的Au/TiO₂能够杀死所有的癌细胞, 而同样浓度的TiO₂只能杀死70%的癌细胞.     

氧化石墨烯-Ag纳米粒子/聚酰亚胺混合基质膜及其渗透汽化性能

以聚乙二醇(PEG-400)为还原剂,Ag NO3为前驱体,采用浸渍-还原法合成氧化石墨烯-Ag纳米粒子(GO-Ag NP)复合物,再通过共混法制备氧化石墨烯-Ag纳米粒子/聚酰亚胺(GO-Ag NP/PI)混合基质膜,用于苯/环己烷混合物的渗透汽化分离。使用透射电子显微镜、红外吸收光谱、拉曼光谱、热失重以及X射线光电子能谱等分析表征GO-Ag NP复合物、GO-Ag NP/PI混合基质膜的形貌和结构;探讨了Ag掺杂量对GO-Ag NP复合物的结构以及GO-Ag NP/PI混合基质膜的结构和渗透汽化性能的影响。结果发现,Ag+被还原形成Ag NP的同时,GO失去了部分含氧官能团;Ag掺杂破坏了GO的结构,使其无序度增加,但改善了GO-Ag NP复合物在混合基质膜中的分散性,提升了GO-Ag NP/PI混合基质膜的苯/环己烷渗透汽化性能。然而过量的Ag掺杂将使GO片层上产生Ag粒子团聚,从而降低混合基质膜的渗透汽化性能。当Ag掺杂量为15%时,GO-Ag NP/PI混合基质膜渗透汽化性能最佳,渗透通量为1 404 g·m-2·h-1,分离因子可达36.2。     

氧化石墨烯-Ag纳米粒子/聚酰亚胺混合基质膜及其渗透汽化性能

以聚乙二醇（PEG-400）为还原剂,AgNO₃为前驱体,采用浸渍-还原法合成氧化石墨烯-Ag纳米粒子（GO-AgNP）复合物,再通过共混法制备氧化石墨烯-Ag纳米粒子/聚酰亚胺（GO-AgNP/PI）混合基质膜,用于苯/环己烷混合物的渗透汽化分离。使用透射电子显微镜、红外吸收光谱、拉曼光谱、热失重以及X射线光电子能谱等分析表征GO-AgNP复合物、GO-AgNP/PI混合基质膜的形貌和结构;探讨了Ag掺杂量对GO-AgNP复合物的结构以及GO-AgNP/PI混合基质膜的结构和渗透汽化性能的影响。结果发现,Ag⁺被还原形成AgNP的同时,GO失去了部分含氧官能团;Ag掺杂破坏了GO的结构,使其无序度增加,但改善了GO-AgNP复合物在混合基质膜中的分散性,提升了GO-AgNP/PI混合基质膜的苯/环己烷渗透汽化性能。然而过量的Ag掺杂将使GO片层上产生Ag粒子团聚,从而降低混合基质膜的渗透汽化性能。当Ag掺杂量为15%时,GO-AgNP/PI混合基质膜渗透汽化性能最佳,渗透通量为1 404 g·m^-2·h^-1,分离因子可达36.2。     

Unusual Extensional Rheology and Dispersion Behavior of High Impact Polystyrene/TiO2 Nanocomposites Prepared by Melt‐Compounding

The extensional rheology and dispersion behavior of high impact polystyrene (HIPS) and HIPS/TiO₂ nanocomposites prepared by melt‐compounding were investigated. The influence of ethylene‐vinyl acetate (EVA) copolymer on the extensional rheology of HIPS/TiO₂ masterbatches was also researched. The rheological experiments investigated with Rosand Presicion Rheometer confirmed that the HIPS/TiO₂ masterbatches, the HIPS/EVA/TiO₂ masterbatches and the HIPS/TiO₂ nanocomposites with low TiO₂ loading shown different extensional rheology in comparison to the pure HIPS. Field‐emission scanning electron microscopy (FE‐SEM) shown the dispersion morphology of TiO₂ nanoparticles in HIPS based nanocomposites and indicated the influence of TiO₂ dispersion behavior on the unusual extensional rheology of HIPS nanocomposites.     

Antibacterial photocatalytic self‐cleaning poly(vinylidene fluoride) membrane for dye wastewater treatment

Membrane technology has been successfully applied for the removal of dyes from wastewater in the textile industry. A novel poly(vinylidene fluoride) (PVDF) membrane was prepared via blending with different dosages of Ag‐TiO₂‐APTES composite for dyeing waste water treatment in our study. And the effect of Ag‐TiO₂‐APTES blended into the PVDF membrane was discussed, including the rejection rate of methylene blue (MB) dye, membrane morphology, surface hydrophilicity, antibacterial activity, and a certain photocatalytic self‐cleaning performance. X‐ray diffraction and Fourier transform infrared characterization confirmed that Ag‐TiO₂ was functionalized by amount of hydroxyl group (−OH) and amino group (NH−), which provided by APTES. Contact angle measurement certified that the hydrophilicity of the membrane surface increased, with the contact angle decrease to 61.4° compared with 81.8° of original PVDF membrane. MB rejection rate was also increased to 90.1% after addition of Ag‐TiO₂‐APTES, and the rejection of original membrane was only 74.3%. The morphologies of membranes were observed by scanning electron microscope, which indicated that Ag‐TiO₂‐APTES had a good dispersion in membrane matrix and also improved the microstructure of membranes. Besides, UV irradiation experiments were performed on the composite films contaminated by MB, and the result showed that Ag‐TiO₂‐APTES nanoparticle provided PVDF membrane with a certain photodegradation capacity under UV irradiation. Moreover, antibacterial activity of the composite membrane was also demonstrated through antibacterial experiment, Escherichia coli as the representative bacteria. Perhaps, this research may provide a new way for PVDF blending modification.     

Effect of polyaniline as a surface modifier of TiO2 nanoparticles on the properties of polyvinyl chloride/TiO2 nanocomposites

Surface of TiO2 nanoparticles was modified with the in situ chemical oxidative polymerization of aniline. Polyaniline modified TiO2 nanoparticles (PANI-TiO2 ) were characterized with the FT-IR, XRD, SEM and TEM techniques. Results confirmed that PANI was grafted successfully on the surface of TiO2 nanoparticles, therefore agglomeration of nanoparticles decreased dramatically. Polyvinyl chloride nanocomposites filled with 1 wt% 5 wt% of PANI-TiO2 and TiO2 nanoparticles were prepared via the solution blending method. PVC nanocomposites were analyzed with FT-IR, XRD, SEM, TG/DTA, DSC and tensile test techniques. Effect of PANI as surface modifier of nanoparticles was discussed according to the final properties of PVC nanocomposites. Results demonstrated that deposition of PANI on the surface of TiO2 nanoparticles improved the interfacial adhesion between the constituents of nanocomposites, which resulted in better dispersion of nanoparticles in the PVC matrix. Also PVC/PANI-TiO2 nanocomposites showed higher thermal resistance, tensile strength and Young’s modulus compared to those of unfilled PVC and PVC/TiO2 nanocomposites.     

Photocatalytic membrane of a novel high surface area TiO2 synthesized from titanium triisopropanolamine precursor

Photocatalytic membrane was successfully prepared using an efficiently high surface area TiO₂ catalyst, dispersed into polyacrylonitrile matrix. The catalyst was directly synthesized using titanium triisopropanolamine as a precursor. The membranes were characterized using FT‐IR, TGA, SEM and their photocatalytic performance tested, viz. stability, permeate flux and photocatalytic degradation of 4‐NP. We find that polyacrylonitrile is an effective matrix, showing high stability and low permeate flux. The amount of TiO₂ loaded in the membrane was varied between 1, 3 and 5 wt% to explore the activity and stability of membranes in the photocatalytic reaction of 4‐NP. As expected, the higher the loading of TiO₂ loaded, the higher the resulting catalytic activity. Copyright © 2006 John Wiley & Sons, Ltd.