Interaction of 2-(2′,6′-dialkylphenylazo)-4-methylphenols with iridium. C-H activation and migration of alkyl group

Reaction of 2-(2′,6′-diethylphenylazo)-4-methylphenol (L²) with [Ir(PPh₃)₃Cl] afforded two organoiridium complexes 3 and 4 via C-H bond activation of an ethyl group in the arylazo fragment of the L² ligand. In both the complexes the azo ligand binds to iridium as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride (in the case of complex 3) or chloride (in the case of complex 4) are also coordinated to the metal center. A similar reaction of [Ir(PPh₃)₃Cl] with 2-(2′,6′-diisopropylphenylazo)-4-methylphenol (L³) yielded another organoiridium complex 5, where migration of one iso-propyl group from its original location (say, the 2′ position) to the corresponding third position (say, the 4′ position) took place through C-C bond activation. In this complex the modified azo ligand binds to iridium as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. The structures of complexes 3 and 4 have been optimized through DFT calculations. The structure of complex 5 has been determined by X-ray crystallography. All the complexes show characteristic ¹H NMR signals and intense transitions in the visible region. Cyclic voltammetry on all the complexes shows an oxidation within 0.66-1.10 V vs SCE, followed by a second oxidation within 1.15-1.33 V vs SCE and a reduction within −0.96 to −1.07 V vs SCE.     

Reactivity of the sulfur center in rhodium-bound benzaldehyde thiosemicarbazones towards molecular oxygen. A theoretical investigation

The 4-R-benzaldehyde thiosemicarbazones (L-R) are known to react with [Rh(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) to afford organorhodium complexes (2-R), where the thiosemicarbazones are coordinated to rhodium as tridentate CNS donors with the sulfur atom oxidized by aerial oxygen to sulfone. Two triphenylphosphines and a hydride are also coordinated to the metal center. From the reaction with 4-nitrobenzaldehyde thiosemicarbazone, a second organorhodium complex (1-NO₂) is obtained, in which the sulfur atom is not oxidized. Reaction of the 4-R-benzaldehyde thiosemicarbazones with [Rh(PPh₃)₃Cl] in refluxing ethanol in the absence of NEt₃ affords another group of organorhodium complexes (3-R), in which the thiosemicarbazones are coordinated to rhodium as tridentate CNS donors, along with two triphenylphosphines and a chloride. In these 3-R complexes also the sulfur atom is not oxidized. Structures of all the complexes have been optimized by DFT calculations and compared with the already known X-ray crystallographic structures. Also the experimentally observed electronic absorption bands have been assigned to specific transitions based on the TDDFT studies. Molecular electrostatic potential (MESP) topographical analysis performed to find the deepest MESP point on the coordinated sulfur atom (V_min) is used as a probe for assessing the oxidizability of the coordinated sulfur in 1-R and 3-R complexes. Energy differences between the three sets of complexes have been estimated and based on the results obtained, 3-R has been experimentally transformed into 2-R, via formation of 1-R as the intermediate.     

Osmium assisted C-H activation and CN cleavage of N-(2′-hydroxyphenyl) benzaldimines. Synthesis, structure and electrochemical properties of some organoosmium complexes

Reaction of N-(2′-hydroxyphenyl)-4-R-benzaldimines (L-R, R = OCH₃, CH₃, H, Cl and NO₂) with [Os(PPh₃)₃Br₂] in refluxing 2-methoxyethanol in the presence of triethylamine affords two families of organoosmium complexes (1-R and 2-R). In both 1-R and 2-R complexes a benzaldimine ligand is coordinated to the metal center as tridentate C,N,O-donor. In the 1-R complexes, a bidentate N,O-donor imionsemiquinonate ligand, derived from the hydrolysis of another benzaldimine, and a PPh₃ ligand are also coordinated to osmium. In the 2-R complexes, a carbonyl, derived from decarbonylation of 4-R-benzaldehyde (derived from the same hydrolysis stated above), and two PPh₃ ligands take up the remaining coordination sites on osmium. Structures of the 1-Cl and 2-OCH₃ complexes have been determined by X-ray crystallography. All the 1-R and 2-R complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the 1-R complexes shows a reversible Os(III)-Os(IV) oxidation within 0.47-0.67 V (vs SCE), followed by an irreversible oxidation of the imionsemiquinonate ligand within 1.10-1.36 V. An irreversible Os(III)-Os(II) reduction is also displayed by the 1-R complexes within −1.02 to −1.14 V. Cyclic voltammetry on the 2-R complexes shows a reversible Os(II)-Os(III) oxidation within 0.29-0.51 V, followed by a quasi-reversible oxidation within 1.04-1.29 V, and an irreversible reduction of the coordinated benzaldimine ligand within −1.16 to −1.31 V.     

Synthesis, structure, and catalytic activity of titanium(IV) and zirconium(IV) amides with chiral biphenyldiamine-based ligands

A new series of titanium(IV) and zirconium(IV) amides have been prepared from the reaction between M(NMe₂)₄ (M = Ti, Zr) and C₂-symmetric ligands, (R)-2,2′-bis(pyridin-2-ylmethylamino)-6,6′-dimethyl-1,1′-biphenyl (2H₂), (R)-2,2′-bis(pyrrol-2-ylmethyleneamino)-6,6′-dimethyl-1,1′-biphenyl (3H₂), (R)-2,2′-bis(diphenylphosphinoylamino)-6,6′-dimethyl-1,1′-biphenyl (4H₂), (R)-2,2′-bis(methanesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (5H₂), (R)-2,2′-bis(p-toluenesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (6H₂), and C₁-symmetric ligands, (R)-2-(diphenylthiophosphoramino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (7H) and (R)-2-(pyridin-2-ylamino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (8H), which are derived from (R)-2,2′-diamino-6,6′-dimethyl-1,1′-biphenyl. Treatment of M(NMe₂)₄ with 1 equiv. of N₄-ligand, 2H₂ or 3H₂ gives, after recrystallization from an n-hexane solution, the chiral zirconium amides (2)Zr(NMe₂)₂ (9), (3)Zr(NMe₂)₂ (11), and titanium amide (3)Ti(NMe₂)₂ (10), respectively, in good yields. Reaction of Zr(NMe₂)₄ with 1 equiv of diphenylphosphoramide 4H₂ affords the chiral zirconium amide (4)Zr(NMe₂)₂ (12) in 85% yield. Under similar reaction conditions, treatment of Ti(NMe₂)₄ with 1 equiv. of sulphonylamide ligand, 5H₂ or 6H₂ gives, after recrystallization from a toluene solution, the chiral titanium amides (5)Ti(NMe₂)₂·0.5C₇H₈ (13·0.5C₇H₈) and (6)Ti(NMe₂)₂ (15), respectively, in good yields, while reaction of Zr(NMe₂)₄ with 1 equiv. of 5H₂ or 6H₂ gives the bis-ligated complexes, (5)₂Zr (14) and (6)₂Zr (16). Treatment of M(NMe₂)₄ with 2 equiv. of diphenylthiophosphoramide ligand 7H or N₃-ligand 8H gives, after recrystallization from a benzene solution, the bis-ligated chiral zirconium amides (7)₂Zr(NMe₂)₂ (17) and (8)₂Zr(NMe₂)₂ (19), and bis-ligated chiral titanium amide (8)₂Ti(NMe₂)₂ (18), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 10, 12, 13, and 17-19 have further been confirmed by X-ray diffraction analyses. The zirconium amides are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good to excellent yields with moderate ee values, while the titanium amides are not.     

Synthesis, structure, and catalytic activity of rhodium complexes with new chiral binaphthyl-based NHC-ligands

Three new chiral NHC-rhodium complexes have been prepared from the reactions between [Rh(COD)Cl]₂, NaOAc, KI, and dibenzimidazolium salts 3, 4 or 5, which are derived from (S)-2,2′-diamino-1,1′-binaphthyl. The steric and electronic effects of the ligand play an important role in the complex formation. For example, treatment of pyridine substituted dibenzimidazolium salts 3 or 4 with 0.5 equiv of [Rh(COD)Cl]₂ in the presence of NaOAc and KI in CH₃CN at 85 °C gives the chiral Rh(III) complexes 6 and 7, respectively. However, under similar reaction conditions, pyridine-N-oxide substituted dibenzimidazolium salt 5 affords a binuclear Rh(I) complex 8. All compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of compounds 4-8 have been further confirmed by X-ray diffraction analyses. Rhodium complexes 6-8 show good catalytic activity for the asymmetric hydrosilylation of acetophenone with moderate ee values.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Synthesis, variable temperature NMR investigations and solid state characterization of novel octafluorofluorene compounds

The preparation of a number of new 9-substituted octafluorofluorene derivatives, solution NMR studies, and the first examples of solid state structures of octafluorofluorenes [1,2,3,4,5,6,7,8-octafluorofluorene, C₁₃H₂F₈, 1; 1,2,3,4,5,6,7,8-octafluoro-9-(pentafluoro)phenylfluorene, C₁₉HF₁₃, 8; 1,1′,2,2′,3,3′,4,4′,5,5′,6,6′,7,7′,8,8′-hexadecafluoro-9,9′-bifluorenyl, C₂₆H₂F₁₆, 11] are reported. Variable temperature ¹⁹F NMR investigations have been performed on the 9-aryl substituted compounds 1,2,3,4,5,6,7,8-octafluoro-9-(pentafluoro)phenyl-9-hydroxyfluorene, C₁₉HF₁₃O, 4, 1,2,3,4,5,6,7,8-octafluoro-9-(nonafluoro-4′-biphenylyl)-9-hydroxyfluorene, C₂₅HF₁₇O, 5, and 8, and the energetic barriers to rotation of the aryl have been determined. A lower rotational barrier is observed for compound 4 with respect to compound 8, while 5 does not show fluxional behaviour below 338 K. The results of the variable temperature experiments performed on 8 have been rationalized by 2D NMR studies, and compared to the solid state data resulting from the X-ray structural analysis.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.     

Rhodium complexes of 1,3-diaryltriazenes: Usual coordination, N-H bond activation and, N-N and C-N bond cleavage

Reaction of 1,3-diaryltriazenes (R-C₆H₄-NN-(NH)-C₆H₄-R, R = OCH₃, CH₃, H, Cl, NO₂ at the para position) with [Rh(PPh₃)₃Cl] in ethanol in the presence of a base (NEt₃) affords a family of yellow complexes (1-R) containing a PPh₃, two de-protonated triazenes coordinated as bidentate N,N-donors, and an aryl (C₆H₄-R) fragment coordinated in the η¹-fashion. A similar reaction in toluene yields a group of reddish-orange complexes (2-R) containing a PPh₃, two N,N-coordinated triazenes, and a chloride. Structures of the 1-CH₃ and 2-CH₃ complexes have been determined by X-ray crystallography. All the 1-R and 2-R complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. The 1-R and 2-R complexes also fluoresce in the visible region under ambient condition while excited at around 400 nm. Cyclic voltammetry on these complexes shows a Rh(III)-Rh(IV) oxidation (within 0.76-1.68 vs. SCE), followed by an oxidation of the coordinated triazene ligand (except the R = NO₂ complexes). An irreversible reduction of the coordinated triazene is also observed for all the complexes below −0.96 V vs. SCE. In the 1-R and 2-R complexes potential of the Rh(III)-Rh(IV) oxidation correlates linearly with the electron-withdrawing nature of the para-substituent (R).     

Sodium dithionite initiated fluoroalkylation of trimethoxybenzenes, mesitylene and pyrroles with BrCF2CF2Br

Sodium dithionite initiated reaction of 1,2-dibromotetrafluoroethane with 1,3,5-trimethoxybenzene (1a) in an acetonitrile-water mixture proceeded efficiently at ambient temperature to give 1-(2-bromotetrafluoroethyl)-2,4,6-trimethoxybenzene (2) almost quantitatively. Similar reaction with 1,2,3-trimethoxybenzene (1b) gave only reasonable yield of regioisomers of (2-bromotetrafluoroethyl)-trimethoxybenzenes 3 and 4 and small amount of a substitution product of the central trimethoxy group, 1-(2-bromotetrafluoroethyl)-2,6-dimethoxybenzene (5). The reaction with mesitylene (6) gave complex mixtures from which, depending on the temperature and a mesitylene/BrCF₂CF₂Br ratio, the expected (2-bromotetrafluoroethyl)mesitylene (8) or a dimeric product, 4,4′-bis(2-bromo-1,1,2,2-tetrafluoroethyl)-1,3,5,1′,3′,5′-hexamethylbicyclohexyl-2,5,2′,5′-tetraene (7), were isolated in a yield of 18 and 13%, respectively. The reactions of BrCF₂CF₂Br with pyrrole (9) and 1-methylpyrrole (11) gave the respective alkylated compounds, 2-(2-bromotetrafluoroethyl)pyrrole (10) and 2-(2-bromotetrafluoroethyl)-1-methylpyrrole (12) in over 70% yields; the former was found to be fairly unstable. The reactivity of the terminal bromine atom in 1-(2-bromotetrafluoroethyl)-2,4,6-trimethoxybenzene (2) was also investigated.     

Diacenaphtho[1,2-c:1,2-e]-1,2-dithiin: synthesis, structure and reactivity

Diacenaphtho[1,2-c:1^′,2^′-e]-1,2-dithiin 2 was synthesized in 23% yield by the reaction of acenaphthylene with elemental sulfur at 120 °C. This reaction also afforded either diacenaphtho[1,2-b:1^′,2^′-d]thiophene 1 or diacenaphtho[1,2-b:1^′,2^′-e]-dihydro[e]-1,4-dithiin 3 depending on the reaction time. Compound 2 was desulfurized and converted to 1 under UV-vis irradiation in a benzene solution. Reaction of 2 with Pt(COD)₂ yielded the complex Pt(COD)(C₂₄H₁₂S₂) 4 (COD=1,5-cyclooctadiene) by insertion of a Pt(COD) group into the S-S bond of 2. When heated, 4 was desulfurized and converted to 1 by elimination of a (COD)PtS grouping. Compounds 1-4 were characterized crystallographically.     

Synthesis, structural characterization, and initial electroluminescent properties of bis-cycloiridiated complexes of 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine

A series of bis-cyclometalated Ir(III) complexes (8-10, 12, 15, 17, 19, 21, 23, 25, 28, 29 and 33) bearing two chromophoric N^∧C cyclometalated ligands derived from 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine (1) and a third nonchromophoric ligand has been synthesized. A palladium-catalyzed cross-coupling reaction between 2-chloro-4-methylpyridine (2) and 3,5-bis(trifluoromethyl)phenylboronic acid (3) was used to prepare 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine (1). Cyclometalation of (1) by IrCl₃ was carried out in (MeO)₃PO, with the formation of chloro-bridged dimer [N^∧C]₂Ir(μ-Cl)₂Ir[C^∧N]₂ (8). Reaction of (8) with lithium 2,4-pentanedionate, lithium 2,2,6,6-tetramethyl-heptane-3,5-dionate (13), dipivaloyltrimethylsilylphosphine (14), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octadione (16), 1,1,1,3,3,3-hexafluoro-2-pyridin-2-yl-propan-2-ol (18), 1,1,1,3,3,3-hexafluoro-2-pyrazol-1-ylmethyl-propan-2-ol (20), 2-diphenylphosphanylethanol (22), and 1-diphenylphosphanylpropan-2-ol (24), afforded octahedral iridium complexes 9, 12, 15, 17, 19, 21, 23 and 25, respectively. Complex 10, which contains three different ligands (L₁ = N^∧C of 1; L₂ = N^∧C of 4,4′-dimethyl-[2,2′]bipyridinyl 4; L₃ = O^∧O of 2,4-pentanedione), and complex 11, which contains no cyclometalated ligands (L₁ = 4; L₂ = L₃ = Cl; L₄ = O^∧O of 2,4-pentanedione) were also isolated as minor products in a one-pot reaction between a 94:5 mixture of 1 and 4, IrCl₃ and lithium 2,4-pentanedionate. Reaction of 8 with diphenylphosphanylmethanol (27) in 1,2-dichloroethane unexpectedly led to complexes 28 and 29. The reactions of 8 with benzoylformic acid resulted in the formation of hydroxyl-bridged dimer [N^∧C]₂Ir(μ-OH)₂Ir[C^∧N]₂ (33). According to X-ray analyses, Ir-to-Ir distances in the crystal cell increase from 6.86 Å for 10 to 13.31 Å for 33. The angle theta, which represents the twisting of two cyclometalated C-Ir-N planes relative to each other, varies from 97.5° for 21 to 90.76 for complex 28. OLED devices were fabricated from several Ir complexes and preliminary results are discussed.     

The synthesis of compounds related to the indole-indoline core of the vinca alkaloids (+)-vinblastine and (+)-vincristine

A series of α′-aryl-α′-carbomethoxycycloalk-2-en-1-ones, 16, has been prepared using the Pinhey arylation methodology for introducing the aromatic residue. Subjection of these compounds to Johnson iodination and Pd[0]-catalyzed Ullmann cross-coupling of the resulting α-iodocycloalkenones 11 with 2-iodonitrobenzene (5, X = I) then affords α,α′-diaryl-α′-carbomethoxycycloalk-2-en-1-ones of the general form 10. Reductive cyclization of this last type of compound gives the corresponding indoles 9a-f (n = 1-3), some of which resemble the indole-indoline cores of the clinically important alkaloids (+)-vinblastine (1) and (+)-vincristine (2).     

The first synthesis and X-ray structures of polyfluorinated 1,2-, 2,3- and 2,4a-dihydro-1,3-diazafluorenes

Acetic acid-catalyzed condensation of 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1b) with acetone and cyclopentanone gives 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene (2a) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3a) together with small amounts of 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene (2b) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3b), respectively. When acted upon by (CH₃)₂SO₄ compounds 2, 3 were converted into corresponding fluorine-containing 1-methyl-1,2-dihydro-1,3-diazafluorenes 6, 7. 4a-Chloro-5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,4a-dihydro-1,3-diazafluorene (8) has been synthesized by the interaction of compound 2 with SOCl₂. Solution of compound 2 as well as 8 in CF₃SO₃H-CD₂Cl₂ generated 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2,3,4-tetrahydro-1,3-diazafluorene-4-yl cation (2c). The structures of compounds 2, 3, 6-8 have been determined by single crystal X-ray diffraction.     

Rhodium and iridium complexes of N-heterocyclic carbenes: Structural investigations and their catalytic properties in the borylation reaction

Bridged and unbridged N-heterocyclic carbene (NHC) ligands are metalated with [Ir/Rh(COD)₂Cl]₂ to give rhodium(I/III) and iridium(I) mono- and biscarbene substituted complexes. All complexes were characterized by spectroscopy, in addition [Ir(COD)(NHC)₂][Cl,I] [COD = 1,5-cyclooctadiene, NHC =  1,3-dimethyl- or 1,3-dicyclohexylimidazolin-2-ylidene] (1, 4), and the biscarbene chelate complexes 12 [(η⁴-1,5-cyclooctadiene)(1,1′-di-n-butyl-3,3′-ethylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] and 14 [(η⁴-1,5-cyclooctadiene)(1,1′-dimethyl-3,3′-o-xylylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] were characterized by single crystal X-ray analysis. The relative σ-donor/π-acceptor qualities of various NHC ligands were examined and classified in monosubstituted NHC-Rh and NHC-Ir dicarbonyl complexes by means of IR spectroscopy. For the first time, bis(carbene) substituted iridium complexes were used as catalysts in the synthesis of arylboronic acids starting from pinacolborane and arene derivatives.     

Photophysical and electrochemical properties of heteroleptic tris-cyclometallated Ir(III) complexes

Some new heteroleptic tris-cyclometallated iridium(III) complexes have been synthesized and fully characterized. Among these iridium(III) complexes, bis(1-phenylpyrazolato-N,C^2′)iridium(III)[5-(2′-pyridyl)tetrazolate] (3) and bis(3-methyl-1-phenylpyrazolato-N,C^2′)iridium(III)[5-(2′-pyridyl)tetrazolate] (4) show excellent quantum yields at room temperature, the electron density being perturbed by introducing the pyridyltetrazole ligand, making k_r > k_nr. This destroys the concept of phenylpyrazole based iridium complexes.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Enantioselective synthesis of planar chiral azaferrocenes via chiral ligand-mediated ring- and lateral-lithiations

Lithiation of 1′,2′,3′,4′,5′-pentamethylazaferrocene (1) with sec-BuLi/(−)-sparteine (3) in Et₂O at −78°C followed by quenching with electrophiles gave the ring-substituted products 2 in 74-81% ee. On the other hand, lithiation of 1′,2,2′,3′,4′,5,5′-heptamethylazaferrocene (6) with sec-BuLi in the presence of S-valine-derived bis(oxazoline) 5 in Et₂O at −55°C and subsequent reaction with electrophiles afforded the laterally functionalized products 7 in excellent enantioselectivity (96-99% ee).     

Syntheses, structures and photoluminescence of a series of coordination frameworks based on dicarboxylate anion and bis(imidazole) ligand

In this article, ten new coordination frameworks, namely, [Ni(H₂O)₆]·(L3) (1), [Zn(L3)(H₂O)₃] (2), [Cd(L3)(H₂O)₃]·5.25H₂O (3), [Ag(L1)(H₂O)]·0.5(L3) (4), [Ni(L3)(L1)] (5), [Zn(L3)(L1)_0.5]·H₂O (6), [Cd(L3)(L1)_0.5(H₂O)] (7), [CoCl(L3)_0.5(L1)_0.5] (8), [ZnCl(L3)_0.5(L2)_0.5] (9), and [CoCl(L3)_0.5(L2)_0.5] (10), where L1 = 1,1′-(1,4)-butanediyl)bis(imidazole), L2 = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole) and H₂L3 = 3,3′-(p-xylylenediamino)bis(benzoic acid), have been synthesized by varying the metal centers and nitrogen-containing secondary ligands. These structures have been determined by single-crystal X-ray diffraction analyses, elemental analyses and IR spectra. In 1, the L3 anion is not coordinated to the Ni(II) center as a free ligand. The Ni(II) ion is coordinated by water molecules to form the cationic [Ni(H₂O)₆]²⁺ complex. The hydrogen bonds between L3 anions and [Ni(H₂O)₆]²⁺ cations result in a three-dimensional (3D) supramolecular structure of 1. In compounds 2 and 3, the metal centers are linked by the organic L3 anions to generate 1D infinite chain structures, respectively. The hydrogen bonds between carboxylate oxygen atoms and water molecules lead the structures of 2 and 3 to form 3D supramolecular structures. In 4, the L3 anion is not coordinated to the Ag(I) center, while the L1 ligands bridge adjacent Ag(I) centers to give 1D Ag-L1 chains. The hydrogen bonds among neighboring L3 anions form infinite 2D honeycomb-like layers, in the middle of which there exist large windows. Then, 1D Ag-L1 chains thread in the large windows of the 2D layer network, giving a 3D polythreaded structure. Considering the hydrogen bonds between the water molecules and L3 anions, the structure is further linked into a 3D supramolecular structure. Compounds 5 and 7 were synthesized through their parent compounds 1 and 3, respectively, while 6 and 9 were obtained by their parent compound 2. In 5, the L3 anions and L1 ligands connect the Ni(II) atoms to give a 3D 3-fold interpenetrating dimondoid topology. Compound 6 exhibits a 3D three-fold interpenetrating α-Po network structure formed by L1 ligands connecting Zn-L3 sheets, while compound 7 shows a 2D (4,4) network topology with the L1 ligands connecting the Cd-L3 double chains. In compound 8, the L1 ligands linked Co-L3 chains into a 2D layer structure. Two mutual 2D layers interpenetrated in an inclined mode to generate a unique 3D architecture of 8. Compounds 9 and 10 display the same 2D layer structures with (4,4) network topologies. The effects of the N-containing ligands and the metal ions on the structures of the complexes 1-10 were discussed. In addition, the luminescent properties of compounds 2-4, 6, 7 and 9 were also investigated.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.