Synthesis and structural characterization of rac-2-[(diphenylphosphino)methyl]ferrocenecarboxylic acid, its selected derivatives and some rhodium complexes

rac-2-[(Diphenylphosphino)methyl]ferrocenecarboxylic acid (1) was prepared in a good yield from rac-2-(N,N-dimethylaminomethyl)bromoferrocene (2) via rac-2-(hydroxymethyl)bromoferrocene (4) and rac-2-[(diphenylphosphino)methyl]bromoferrocene (5), and further converted to the respective phosphine oxide (6), phosphine sulfide (7) and methyl ester (8). The phosphines 1 and 8 were studied as ligands in rhodium complexes. The reaction of di-μ-chloro-bis[chloro-(η⁵-pentamethylcyclopentadienyl)rhodium(III)] with the stoichiometric amounts of 1 and 8 yielded the corresponding mononuclear complexes with P-monodentate ligands: [RhC₂(η⁵-C₅Me₅)(L-κP)], 9 and 10, respectively. Attempted deprotonation of 9 with LiBu or KOt-Bu gave intractable mixtures, in which the parent complex 9 as the major component was accompanied by two new compounds, likely the diastereoizomeric phosphinocarboxylate complexes. A defined O,P-chelating phosphinocarboxylate complex, [SP-4-2]-carbonyl-[rac-2-{(diphenylphosphino)methyl}ferrocenecarboxylato-κ²O,P]-tricyclohexylphosphinerhodium(I) (12), was obtained from the displacement of acetylacetonate(1−) (acac) ligand in [Rh(acac)(CO)(PCy₃)] (Cy = cyclohexyl) with acid 1. The structures of 1, 6 · CHCl₃, and 7 · 1/2 CH₂Cl₂, 10, and hydrated complexes 9 and 12 were determined by single-crystal X-ray diffraction.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

Nucleophilic substitution reactions at the Si-Cl bonds of the dichloro(methyl)silyl ligand in five- and six-coordinate complexes of ruthenium(II) and osmium(II)

Treatment of either RuHCl(CO)(PPh₃)₃ or MPhCl(CO)(PPh₃)₂ with HSiMeCl₂ produces the five-coordinate dichloro(methyl)silyl complexes, M(SiMeCl₂)Cl(CO)(PPh₃)₂ (1a, M = Ru; 1b, M = Os). 1a and 1b react readily with hydroxide ions and with ethanol to give M(SiMe[OH]₂)Cl(CO)(PPh₃)₂ (2a, M = Ru; 2b, M = Os) and M(SiMe[OEt]₂)Cl(CO)(PPh₃)₂ (3a, M = Ru; 3b, M = Os), respectively. 3b adds CO to form the six-coordinate complex, Os(SiMe[OEt]₂)Cl(CO)₂(PPh₃)₂ (4b) and crystal structure determinations of 3b and 4b reveal very different Os-Si distances in the five-coordinate complex (2.3196(11) Å) and in the six-coordinate complex (2.4901(8) Å). Reaction between 1a and 1b and 8-aminoquinoline results in displacement of a triphenylphosphine ligand and formation of the six-coordinate chelate complexes M(SiMeCl₂)Cl(CO)(PPh₃)(κ²(N,N)-NC₉H₆NH₂-8) (5a, M = Ru; 5b, M = Os), respectively. Crystal structure determination of 5a reveals that the amino function of the chelating 8-aminoquinoline ligand is located adjacent to the reactive Si-Cl bonds of the dichloro(methyl)silyl ligand but no reaction between these functions is observed. However, 5a and 5b react readily with ethanol to give ultimately M(SiMe[OEt]₂)Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6a, M = Ru; 6b, M = Os). In the case of ruthenium only, the intermediate ethanolysis product Ru(SiMeCl[OEt])Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6c) was also isolated. The crystal structure of 6c was determined. Reaction between 1b and excess 2-aminopyridine results in condensation between the Si-Cl bonds and the N-H bonds with formation of a novel tridentate “NSiN” ligand in the complex Os(κ³(Si,N,N)-SiMe[NH(2-C₅H₄N)]₂)Cl(CO)(PPh₃) (7b). Crystal structure determination of 7b shows that the “NSiN” ligand coordinates to osmium with a “facial” arrangement and with chloride trans to the silyl ligand.     

Diphenylphosphino(phenyl pyridin-2-yl methylene)amine palladium(II) complexes: Chemoselective alkene hydrocarboxylation initiators

The heteroditopic, P-N-chelating ligand diphenylphosphino(phenyl pyridin-2-yl methylene)amine (1) has been synthesised via a simple ‘one-pot’ procedure and its donor characteristics assessed. The neutral [MX(Y)(1-κ²-P-N)] (3, M = Rh, X = Cl, Y = CO; 4, M = Pd, X = Y = Cl; 5, M = Pd, X = Cl, Y = Me; 6, M = Pt, X = Y = Cl; 7, M = Pt, X = Cl, Y = Me; 8, M = Pt, X = Y = Me) and cationic [Pd(Me)(MeCN)(1-κ²-P-N)][Z] (9, Z = B{3,5-(CF₃)₂-C₆H₃}4; 10, Z = PF₆) complexes of 1 have been prepared and characterised. The solid-state structures of complexes 3, 4, 6 and 7 have been established by X-ray crystallography. Reactions of [PdCl(Me)(1-κ²-P-N)] towards CO and ^tBuNC have been investigated, affording the corresponding η¹-acyl (12) and -iminoacyl (14) complexes, respectively. Similar insertion chemistry is observed for the cationic derivative 9. Treatment of the acyl complex 12 with ethene at elevated pressure establishes an equilibrium between the starting material and the product resulting from insertion, 13. Under catalytic conditions, combination of palladium(II) with 1 in MeOH affords a selective initiator for the formation of 4-oxo-hexanoic acid methyl ester (15) from CO/ethene (38 bar, 90 °C).     

Chalcogen-capped ruthenium carbonyl clusters derived from diphosphazane mono- and dichalcogenides of the type X2P(E)N(R)PX2 and X2P(E)N(R)P(E)X2 (E = S or Se)

Reactions of Ru₃(CO)₁₂ with diphosphazane monoselenides Ph₂PN(R)P(Se)Ph₂ [R = (S)-∗CHMePh (L⁴), R = CHMe₂ (L⁵)] yield mainly the selenium bicapped tetraruthenium clusters [Ru₄(μ₄-Se)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] (1, 3). The selenium monocapped triruthenium cluster [Ru₃(μ₃-Se)(μ_sb-CO)(CO)₇{κ²-P,P-Ph₂PN((S)-∗CHMePh)PPh₂}] (2) is obtained only in the case of L⁴. An analogous reaction of the diphosphazane monosulfide (PhO)₂PN(Me)P(S)(OPh)₂ (L⁶) that bears a strong π-acceptor phosphorus shows a different reactivity pattern to yield the triruthenium clusters, [Ru₃(μ₃-S)(μ₃-CO)(CO)₇{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (9) (single sulfur transfer product) and [Ru₃(μ₃-S)₂(CO)₅{κ²-P,P-(PhO)₂PN(Me)P(OPh)₂}{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (10) (double sulfur transfer product). The reactions of diphosphazane dichalcogenides with Ru₃(CO)₁₂ yield the chalcogen bicapped tetraruthenium clusters [Ru₄(μ₄-E)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] [R = (S)-∗CHMePh, E = S (6); R = CHMe₂, E = S (7); R = CHMe₂, E = Se (3)]. Such a tetraruthenium cluster [Ru₄(μ₄-S)₂(μ- CO)(CO)₈{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (11) is also obtained in small quantities during crystallization of cluster 9. The dynamic behavior of cluster 10 in solution is probed by NMR studies. The structural data for clusters 7, 9, 10 and 11 are compared and discussed.     

Oxovanadium(IV) and (V) complexes of acetylpyridine-derived semicarbazones exhibit insulin-like activity

Reaction of 2-acetylpyridine semicarbazone (H2APS), 3-acetylpyridine semicarbazone (H3APS) and 4-acetylpyridine semicarbazone (H4APS) with [VO(acac)₂] (acac = acetylacetonate) gave [VO(H2APS)(acac)₂] (1), [VO(H3APS)(acac)₂] (2) and [VO(4APS)(acac)(H₂O)] · 1/2H₂O (3). Oxidation of complex 1 in acetonitrile gave [VO₂(2APS)] (4). The crystal structures of complexes 1 and 4 have been determined. Complexes 1–3 were able to enhance glucose uptake and to inhibit glycerol release from adipocytes, which indicate their potential to act as insulin-mimics.     

Coordination properties of N2S (1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane) or N2S2 (1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane or 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene) donor ligands toward Rh(I)

The 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane ligand (bdtp) reacts with [Rh(COD)(THF)₂][BF₄] to give [Rh(COD)(bdtp)][BF₄] ([1][BF₄]), which is fluxional in solution on the NMR time scale. Its further treatment with carbon monoxide leads to a displacement of the 1,5-cyclooctadiene ligand, generating a mixture of two complexes, namely, [Rh(CO)₂(bdtp)][BF₄] ([2][BF₄]) and [Rh(CO)(bdtp-κ³N,N,S)][BF₄] ([3][BF₄]). In solution, [2][BF₄] exists as a mixture of two isomers, [Rh(CO)₂(bdtp-κ²N,N)]⁺ ([2a]⁺) and [Rh(CO)₂(bdtp-κ³N,N,S)]⁺ ([2b]⁺; major isomer) rapidly interconverting on the NMR time scale. At room temperature, [2][BF₄] easily loses one molecule of carbon monoxide to give [3][BF₄]. The latter is prone to react with carbon monoxide to partially regenerate [2][BF₄]. The ligands 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) are seen to react with two equivalents of [Rh(COD)(THF)₂][BF₄] to give the dinuclear complexes [Rh₂(bddf)(COD)₂][BF₄]₂ ([4][BF₄]₂) and [Rh₂(bddo)(COD)₂][BF₄]₂ ([5][BF₄]₂), respectively. In such complexes, the ligand acts as a double pincer holding two rhodium atoms through a chelation involving S and N donor atoms. Bubbling carbon monoxide into a solution of [4][BF₄]₂ results in loss of the COD ligand and carbonylation to give [Rh₂(bddf)(CO)₄][BF₄]₂ ([6][BF₄]₂). The single-crystal X-ray structures of [3][CF₃SO₃], [5][BF₄]₂ and [6][BF₄]₂ are reported.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

Aqueous syntheses of [(Cp-R)M(CO)3] type complexes (Cp = cyclopentadienyl, M = Mn, Tc, Re) with bioactive functionalities

We describe reactions of [^99mTc(H₂O)₃(CO)₃)]⁺ (1) with Diels-Alder products of cyclopentadiene such as “Thiele’s acid” (HCp-COOH)₂ (2) and derivatives thereof in which the corresponding [(Cp-COOH)^99mTc(CO)₃)] (3) complex did form in water. We propose a metal mediated Diels-Alder reaction mechanism. To show that this reaction was not limited to carboxylate groups, we synthesized conjugates of 2 (HCp-CONHR)₂ (4a-c) (4a, R = benzyl amine; 4b, R = N_α-Boc-l-2,3-diaminopropionic acid and 4c, R = glycine). The corresponding ^99mTc complexes [(4a)^99mTc(CO)₃)] 6a, [(4b)^99mTc(CO)₃)] 6b and [(4c)^99mTc(CO)₃)] 6c have been prepared along the same route as for Thiele’s acid in aqueous media demonstrating the general applicability of this synthetic strategy. The authenticity of the ^99mTc complexes on the no carrier added level have been confirmed by chromatographic comparison with the structurally characterized manganese or rhenium complexes.Studies of the reaction of 1 with Thiele’s acid bound to a solid phase resin demonstrated the formation of [(Cp-COOH)^99mTc(CO)₃)] 3 in a heterogeneous reaction. This is the first evidence for the formation of no carrier added ^99mTc radiopharmaceuticals containing cyclopentadienyl ligands via solid phase syntheses. Macroscopically, the manganese analogue 5a and the rhenium complexes 5b-c have been prepared and characterized by IR, NMR, ESI-MS and X-ray crystallography for 5a (monoclinic, P2₁/c, a = 9.8696(2) Å, b = 25.8533(4) Å, c = 11.8414(2) Å, β = 98.7322(17)°) in order to unambiguously assign the authenticity of the corresponding ^99mTc complexes.     

A novel reaction producing the rhodium(I) complexes with π-coordinated tetraphenylborate anion, (π-PhBPh3). X-ray study of [Rh(PPh3)2(π-PhBPh3)]

Treating the complexes [Rh(TFA)(PPh₃)₂], [Rh(HFA)(PPh₃)₂], and [Rh(TFA)(Cod)] (TFA - trifluoroacetylacetonate, HFA - hexafluoroacetylacetonate, Cod - 1,5 cyclooctadiene) with an excess of NaBPh₄ in acetonitrile yields the rhodium(I) complexes with coordinated [BPh₄]⁻ anion, [Rh(PPh₃)₂(π-PhBPh₃)] · 2MeCN (I) and [Rh(Cod)(π-PhBPh₃)] (II). The reactions present a new example of β-diketonate ligand replacement. The ¹H, ³¹P, and ¹¹B NMR spectra of I and II are discussed. [Rh(PPh₃)₂(π-PhBPh₃)] has been characterized by single crystal X-ray analysis.     

Synthesis of 2-picolyl functionalized η-cyclopentadienyl derivatives of rhodium(I) and iridium(I) and preliminary study of their reaction with ruthenium(II) for assembling hetero-bimetallic complexes

The 2-picolylcyclopentadienyl derivatives of rhodium(I) and iridium(I) of formula [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(η⁴-C₈H₁₂)] (3) (M = Rh) and (4) (M = Ir) are obtained in good yields by reacting 2-picolylcyclopentadienyllithium (7) with [RhCl(η⁴-C₈H₁₂)]₂ and [IrCl(η⁴-C₈H₁₂)]₂, respectively. The corresponding dicarbonyl derivatives, [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(CO)₂] (5) (M = Rh) and 6 (M = Ir), are obtained in good yields by reacting 2-picolylcyclopentadienylthallium(I) (8) with [RhCl(CO)₂]₂ and [IrCl(C₅H₅N)(CO)₂], respectively. 5 has already been reported in the literature. The new complexes were characterized by elemental analysis, mass spectrometry, ¹H NMR, FT-IR, and UV-Vis (210-330 nm) spectroscopy. The UV-Vis spectra indicate the existence of some electronic interaction between the 2-picolinic chromophore and the cyclopentadienyl-metal moiety. The study of the electrochemical behaviour of 3-6 by cyclic voltammetry (CV) allows the interpretation of the electrode processes and gives information about the location of the redox sites. Moreover, various synthetic strategies were tested in order to try to coordinate the complexes 3-6 to a ruthenium(II) centre, but most of them failed. Instead, the hetero-bimetallic complex bis(2,2′-bipyridine)[(η⁵-2-picolylcyclopentadienyl)(η⁴-cycloocta-1,5-diene)rhodium(I)]chlororuthenium(II)-(hexafluorophosphate) (13), was obtained, although in poor yields (10%), by reacting the nitrosyl complex [RuCl(bipy)₂(NO)][PF₆]₂14 (bipy = 2,2′-bipyridine) first with potassium azide and then with the rhodium(I) complex 3. The analogous complex bis(2,2′-bipyridine)(2-picoline)chlororuthenium(II)-(hexafluorophosphate) (15), that carries a ruthenium-bonded 2-picoline molecule instead of 3, has prepared in the same way. 13 and 15 were characterized by elemental analysis, mass spectrometry, and ¹H NMR.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Preparation of phosphinoferrocene carboxamides from isocyanates. Synthesis and structural characterisation of palladium(II) and platinum(II) complexes with 1′-(diphenylphosphino)-1-(N-phenylcarbamoyl)ferrocene

The reaction of in situ generated 1′-(diphenylphosphino)-1-lithioferrocene with isocyanates RNCO affords the respective phosphino-carboxamides Ph₂PfcCONHR (fc = ferrocene-1,1′-diyl, R = cyclohexyl (2), and Ph (3)) in moderate yields. The coordination behaviour of 3 chosen as a representative was studied in palladium(II) and platinum(II) complexes. Depending on the metal precursor and the reaction conditions, the following compounds featuring this ligand as a P-monodentate or an O,P-chelating donor were isolated and characterised by spectroscopic methods (IR, multinuclear NMR and electrospray ionisation MS): trans-[PdCl₂(3-κP)₂] (5), trans-[PtCl₂(3-κP)₂] (6), cis-[PtCl₂(3-κP)₂] (7), [SP-4-4]-[(L^NC)PdCl(3-κP)] (8; L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), and [SP-4-3]-[(L^NC)PdCl(3-κ²O,P)]SbF₆ (9). Besides, the crystal structures of a phosphine oxide resulting by oxidation of 2, viz Ph₂P(O)fcCONHCy (4), and of complexes 5·2Et₂O and 9 have been determined by single-crystal X-ray diffraction analysis.     

Chiral C1-symmetric 2,2′:6′,2′′-terpyridine ligands: Synthesis,characterization, complexation with copper(II), rhodium(III) and ruthenium(II) ions and use of the complexes in catalytic cyclopropanation of styrene

Three new optically pure C₁-terpyridine ligands (L1–3) were prepared and the copper(II) complexes, of formula [Cu(L)Cl₂], the rhodium(III) complexes, of formula [Rh(L)Cl₃], and the ruthenium(II) complexes, of formula cis- or trans-[Ru(L)(X)Cl₂] (X = DMSO or CO), were synthesized. Structures of a chiral C₁-ligand, a copper complex, a rhodium complex and a ruthenium DMSO complex were analysed using X-ray crystal structure analysis. The copper, rhodium and ruthenium complexes were shown to be precursors of catalysts for cyclopropanation. Reaction of [Cu(L)Cl₂], [Rh(L)Cl₃] or cis- or trans-[Ru(L)(X)Cl₂] with AgOTf converted the complex to catalyst, which in the case of trans-[Ru(L)(CO)Cl₂] gave enantioselectivities of up to 67% ee for the cis-isomers of styrene cyclopropanes with t-butyl diazoacetate. Comparisons with C₂-analog of copper, rhodium and ruthenium catalysts were made.     

Alkynylphosphanes as supports for mixed-metal Co4M (M = Ru, Os) fluoride complexes: Syntheses, structures and thermolysis studies

Treatment of the tetrameric group eight fluoride complexes [MF(μ-F)(CO)₃]₄ [M = Ru (1a), Os (1b)] with the alkynylphosphane, Ph₂PCCPh, results in fluoride-bridge cleavage and the formation of the air-sensitive monomeric octahedral complexes [MF₂(CO)₂(PPh₂CCPh)₂] [M = Ru (2a), Os (2b)] in high yield. The molecular structure of 2b reveals a cis, cis, trans configuration for each pair of ligands, respectively. The free alkyne moieties in 2 can be readily complexed to hexacarbonyldicobalt fragments by treatment with dicobalt octacarbonyl to afford [MF₂(CO)₂(μ-η¹:η²-PPh₂CCPh)₂{Co₂(CO)₆}₂] [M = Ru (3a), Os (3b)]. Evidence for an intramolecular non-bonded contact between a bound fluoride and a cobalt carbonyl carbon atom is seen in the molecular structure of 3a. Thermolysis of 3a at 50 °C results in fluoride dissociation to give [RuF(CO)₂(μ-η¹:η²-PPh₂CCPh)₂{Co₂(CO)₆}₂]⁺ (4), while no reaction occurred with the osmium analogue. Prolonged thermolysis at 120 °C in a sealed vessel of both 3a and 3b gave only insoluble decomposition products.     

Photocatalytic properties of new cyclopentadienyl and indenyl rhodium(I) carbonyl complexes with water-soluble 1,3,5-triaza-7-phosphaadamantane (PTA) and tris(2-cyanoethyl)phosphine

Reactions of [(η⁵-R)Rh(CO)₂] (R = cp, ind) with water-soluble phosphines (L = 1,3,5-triaza-7-phosphaadamantane and tris(2-cyanoethyl)phosphine) give the new rhodium(I) complexes of the types [Rh(η⁵-cp)(CO)(PTA)] (1), [Rh(η⁵-cp)(CO)(P(CH₂CH₂CN)₃)] (2), [Rh(η⁵-ind)(CO)(PTA)] (3) and [Rh(η⁵-ind)(CO)(P(CH₂CH₂CN)₃)] (4) in isolated yields of 52-75%. All these compounds have been fully characterized by IR, ¹H, ³¹P{¹H} and ¹³C{¹H} NMR, FAB-MS spectroscopies and elemental analyses. Reactivity for the substitution of phosphine is greater for [(η⁵-ind)Rh(CO)(L)] comparing to [(η⁵-cp)Rh(CO)(L)] because of a flexibility of the indenyl ligand to undergo facile η⁵-η³ coordinative isomerizations. The obtained complexes are active catalyst precursors for the dehydrogenation of propan-2-ol, octane and cyclooctane under photoassisted conditions without any organic hydrogen transfer acceptors, giving TOFs of 26-56 using 3 as precatalyst.     

Bio-catalysts and catalysts based on ruthenium(II) polypyridyl complexes imparting diphenyl-(2-pyridyl)-phosphine as a co-ligand

Reactions of the ruthenium complexes [Ru(κ³-tpy)(PPh₃)Cl₂], [Ru(κ³-tptz)(PPh₃)Cl₂] and [Ru(κ³-tpy)Cl₃] [tpy = 2,2′:6′,2′′-terpyridine; tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine] with diphenyl-(2-pyridyl)-phosphine (PPh₂Py) have been investigated. The complexes [Ru(κ³-tpy)(PPh₃)Cl₂] and [Ru(κ³-tptz)(PPh₃)Cl₂] reacted with PPh₂Py to afford [Ru(κ³-tpy)(κ¹-P-PPh₂Py)₂Cl]⁺ (1) and [Ru(κ³-tptz)(κ¹-P-PPh₂Py)₂Cl]⁺ (2), which were isolated as their tetrafluoroborate salts. Under analogous conditions, [Ru(κ³-tpy)Cl₃] gave a neutral complex [Ru(κ³-tpy)(κ¹-PPh₂Py)Cl₂] (3). Upon treatment with an excess of NH₄PF₆ in methanol, 1 and 2 gave [Ru(κ³-tpy)(κ¹-P-PPh₂Py)(κ²-P,N-PPh₂Py)](PF₆)₂ (4) and [Ru(κ³-tptz)(κ¹-P-PPh₂Py)(κ²-P,N-PPh₂Py)](PF₆)₂ (5) containing both monodentate and chelated PPh₂Py. Further, 4 and 5 reacted with an excess of NaCN and CH₃CN to afford [Ru(κ³-tpy)(κ¹-P-PPh₂Py)₂(CN)](PF₆) (6), [Ru(κ³-tpy)(κ¹-P-PPh₂Py)₂(NCCH₃)](PF₆)₂ (7), [Ru(κ³-tptz)(κ¹-P-PPh₂Py)₂(CN)]PF₆ (8) and [Ru(κ³-tptz)(κ¹-P-PPh₂Py)₂(NCCH₃)](PF₆)₂ (9) supporting hemi labile nature of the coordinated PPh₂Py. The complexes have been characterized by elemental analyses, spectral (IR, NMR, electronic absorption, FAB-MS), electrochemical studies and structures of 1, 2 and 3 determined by X-ray single crystal analyses. At higher concentration level (40 μM) the complexes under investigation exhibit inhibitory activity against DNA-Topo II of the filarial parasite S. cervi and 3 catalyses rearrangement of aldoximes to amide under aerobic conditions.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).