Synthesis and Characterization of 5‐Cyanotetrazolide‐Based Ionic Liquids

New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5‐cyanotetrazolide anion [C₂N₅]^? are reported. Depending on the nature of cation–anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm^?1 at 20 °C for the IL 1‐butyl‐1‐methylpyrrolidinium 5‐cyanotetrazolide [BMPyr][C₂N₅]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium‐ion batteries.     

Nuclear magnetic resonance spectroscopic studies of the trihexyl (tetradecyl) phosphonium chloride ionic liquid mixtures with water

Tetra-alkyl Phosphonium ionic liquids are phosphonium salts with melting points near room temperature. We report the NMR studies of water-trihexyl (tetradecyl) phosphonium chloride ionic liquid mixtures. The proton chemical shifts were used to investigate the intermolecular interactions in mixtures of ionic liquids and water. The OH chemical shifts were found to decrease as the water concentration in the ionic liquid increased, and their rate of change with temperature decreased with water concentration. The CH₂ and CH₃ chemical shifts were found to move downfield with the increase in temperature, and moved further downfield as water concentration was decreased. The interface of experimental data and the results of quantum calculations suggest a significant binding of phosphonium cations to chloride anion and water molecules. As well, the analysis of the data suggests a possible transformation from cationchloride-water configuration at low water concentrations to cation-water-water at higher water concentrations. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users.     

Room-Temperature Synthesis of the Bi5[GaCl4]3 Salt From Three Different Classes of Ionic Liquids

Following the development in the synthesis of subvalent cluster compounds, we report on the use of three different classes of room-temperature ionic liquids for the synthesis of the pentabismuth-tris(tetragallate) salt, Bi₅[GaCl₄]₃, characterized by X-ray diffraction. The Bi₅[GaCl₄]₃ salt was prepared by reduction of BiCl₃ using gallium metal in ionic liquid reaction media containing a strong Lewis acid, GaCl₃. The ionic liquids; trihexyltetradecyl phosphonium chloride [Th-Td-P⁺]Cl^?, 1-dodecyl-3-methylimidazolium chloride [Dod-Me-Im⁺]Cl^? and N-butyl-N-methylpyrrolidinium chloride [Bu-Me-Pyrr⁺]Cl^? from three of the main classes of ionic liquids were used in synthesis. Reactions using ionic liquids composed of the trihexyltetradecyl phosphonium cation [Th-Td-P⁺] and the anions; tetrafluoroborate [BF₄ ^?], bis(trifluoro-methyl sulfonyl) imide [(Tf)₂N^?] and hexafluorophosphate [PF₆ ^?] were also investigated.     

Tunable Aryl Alkyl Ionic Liquids with Weakly Coordinating Tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)4] Anions

Weakly coordinating borate or aluminate anions have recently been shown to yield interesting properties of the resulting ionic liquids (ILs). The same is true for large phenyl‐substituted imidazolium cations, which can be tuned by the choice, position, or number of substituents on the aromatic ring. We were therefore interested to combine these aryl alkyl imidazolium cations with the weakly coordinating tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)₄]^? anions to study the physical properties and viscosities of these ionic liquids. Despite the large size and high molecular weight of these readily available ILs, they are liquid at room temperature and show remarkably low glass transition points and relatively high decomposition temperatures.     

Prediction by the ASOG method of liquid–liquid equilibrium for binary and ternary systems containing 1-alkyl-3-methylimidazolium hexafluorophosphate

Ionic liquids are neoteric, environmentally friendly solvents (since they do not produce emissions) composed of large organic cations and relatively small inorganic anions. They have favorable physical properties, such as negligible volatility and wide range of liquid existence. Moreover, many different cations and anions can be used to synthesize ionic liquid, so the properties can be designed by the use of selected combinations of anions and cations. Liquid–liquid equilibrium (LLE) data for systems including ionic liquids, although essential for the design and operation of separation processes, are still scarce. However, some recent studies have presented ternary LLE data involving several ionic liquids and organic compounds such as alkanes, alkenes, alkanols, water, ethers and aromatics. In this work, the ASOG model for the activity coefficient is used to predict the LLE for 11 binary and 17 ternary systems including the ionic liquid 1-alkyl-3-methylimidazolium hexafluorophosphate plus alkanes, alkenes, alkanols, ketones, carboxylic acids and aromatics. New group interaction parameters were determined by using a modified Simplex method, minimizing a composition-based objective function. The results are satisfactory, with rms deviations of about 4%.     

Liquid Nickel Salts: Synthesis,Crystal Structure Determination,and Electrochemical Synthesis of Nickel Nanoparticles

New nickel‐containing ionic liquids were synthesized, characterized and their electrochemistry was investigated. In addition, a mechanism for the electrochemical synthesis of nanoparticles from these compounds is proposed. In these so‐called liquid metal salts, the nickel(II) cation is octahedrally coordinated by six N‐alkylimidazole ligands. The different counter anions that were used are bis(trifluoromethanesulfonyl)imide (Tf₂N^?), trifluoromethanesulfonate (OTf^?) and methanesulfonate (OMs^?). Several different N‐alkylimidazoles were considered, with the alkyl sidechain ranging in length from methyl to dodecyl. The newly synthesized liquid metal salts were characterized by CHN analysis, FTIR, DSC, TGA and viscosity measurements. An odd‐even effect was observed for the melting temperatures and viscosities of the ionic liquids, with the complexes with an even number of carbon atoms in the alkyl chain of the imidazole having a higher melting temperature and a lower viscosity than the complexes with an odd number of carbons. The crystal structures of several of the nickel(II) complexes that are not liquid at room temperature were determined. The electrochemistry of the compounds with the lowest viscosities was investigated. The nickel(II) cation could be reduced but surprisingly no nickel deposits were obtained on the electrode. Instead, nickel nanoparticles were formed at 100 % selectivity, as confirmed by TEM. The magnetic properties of these nanoparticles were investigated by SQUID measurements.     

Aqueous Solutions of Ionic Liquids: Microscopic Assembly

Aqueous solutions of ionic liquids are of special interest, due to the distinctive properties of ionic liquids, in particular, their amphiphilic character. A better understanding of the structure–property relationships of such systems is hence desirable. One of the crucial molecular‐level interactions that influences the macroscopic behavior is hydrogen bonding. In this work, we conduct molecular dynamics simulations to investigate the effects of ionic liquids on the hydrogen‐bond network of water in dilute aqueous solutions of ionic liquids with various combinations of cations and anions. Calculations are performed for imidazolium‐based cations with alkyl chains of different lengths and for a variety of anions, namely, [Br]^?, [NO₃]^?, [SCN]^?, [BF₄]^?, [PF₆]^?, and [Tf₂N]^?. The structure of water and the water–ionic liquid interactions involved in the formation of a heterogeneous network are analyzed by using radial distribution functions and hydrogen‐bond statistics. To this end, we employ the geometric criterion of the hydrogen‐bond definition and it is shown that the structure of water is sensitive to the amount of ionic liquid and to the anion type. In particular, [SCN]^? and [Tf₂N]^? were found to be the most hydrophilic and hydrophobic anions, respectively. Conversely, the cation chain length did not influence the results.     

A simple access to metallic or onium bistrifluoromethanesulfonimide salts

Numerous salts of the (CF₃SO₂)₂N⁻ anion, called TFSI, were prepared according to an original one-pot procedure. First, N-benzyl trifluoromethanesulfonimide (N-benzyl triflimide) was treated with ethanol to form an oxonium intermediate, which was then neutralized by various bases to provide metallic or trialkylammonium triflimides salts. Alternatively, N-benzyl triflimide was directly treated with trialkyl sulfonium, quaternary ammonium or phosphonium halides to deliver the corresponding triflimide derivatives. N-Benzyl triflimide can be also reacted with di- or tri-alkylamines and phosphines to get benzyl onium salts. Analogous reactions can be carried out with N-allyl triflimide. Therefore, the TFSI anion can be very easily and expediently associated with a wide range of metallic or organic cations. Such salts can find applications as electrolytes for batteries and fuel cells, ionic liquids or Lewis acids.     

Synthesis and Structure of Ionic Liquids Containing the ­[Al(OC6H4CN)4]– Anion

The synthesis, structure, and physical properties of ionic liquids (IL) bearing the novel [Al(O–C₆H₄–CN)₄]^– ion as counterion to the commonly used [NR₄]⁺, [PR₄]⁺ and imidazolium ions are reported. Both the influence of the alkyl chain length as well as the functionalization with cyano groups is studied. These ILs are easily obtained by reaction of Ag[Al(O–C₆H₄–CN)₄] with the corresponding ammonium, phosphonium, and imidazolium halides. The stability towards electrophilic cations was investigated. All prepared salts have a window for the liquid phase of ca. 200 °C and are thermally stable up to 450 °C. The solid‐state structures reveal only weak cation ··· anion and anion ··· anion interactions in accord with the observed low melting points (glass transition points).     

In search of ionic liquids incorporating azolate anions

Twenty-eight novel salts with tetramethyl-, tetraethyl-, and tetrabutylammonium and 1-butyl-3-methylimidazolium cations paired with 3,5-dinitro-1,2,4-triazolate, 4-nitro-1,2,3-triazolate, 2,4-dinitroimidazolate, 4,5-dinitroimidazolate, 4,5-dicyanoimidazolate, 4-nitroimidazolate, and tetrazolate anions have been prepared and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the physicochemical properties of the resulting salts, including several ionic liquids, have been examined and discussed. Ionic liquids (defined as having m.p.<100 degrees C) were obtained with all combinations of the 1-butyl-3-methylimidazolium cation ([C(4)mim](+)) and the heterocyclic azolate anions studied, and with several combinations of tetraethyl or tetrabutylammonium cations and the azolate anions. The [C(4)mim](+) azolates were liquid at room temperature exhibiting large liquid ranges and forming glasses on cooling with glass-transition temperatures in the range of -53 to -82 degrees C (except for the 3,5-dinitro-1,2,4-triazolate salt with m.p. 33 degrees C). Six crystal structures of the corresponding tetraalkylammonium salts were determined and the effects of changes to the cations and anions on the packing of the structure have been investigated.     

Phosphonium-phosphates/thiophosphates: Ionic liquids or liquid ion pairs? NMR spectroscopic classification

Structurally unique ionic liquids phosphonium-phosphate and phosphonium-thiophosphate, having both phosphorus based counter ions, in which the anionic part is represented by di-aryl phosphate or di-aryl thiophosphate and cations been tetraalkylphosphonium groups, behave differently in terms of their NMR behaviour. While phosphonium-phosphates show significant changes in its ¹H, ¹³C and ³¹P NMR chemical shifts vis. á vis. corresponding chemical shifts for a physical mixture of tetraalkylphosphonium bromide and di-aryl phosphate, phosphonium-thiophosphates behave almost similarly in terms of NMR with their synthetic precursors, hence indicating phosphate-phosphonium interaction has a significant covalent component resembling more to a liquid ion pair while thiophosphate-phosphonium interaction is principally ionic in nature. Translational diffusion behavior studied by PFGSE-NMR experiments and ionic conductivities of these ionic liquids in chloroform solution corroborated the hypothesis. The effect of variable alkyl chain length in phosphonium cation is effectively observed in the extent of ion association. Results of this study may provide insight into the solution state behavior of these ionic liquids, would help to classify those in terms of their strength of ion association and thus potential application thereof.     

Electrospray ionization mass spectrometry of ionic liquids and determination of their solubility in water

Electrospray ionization mass spectrometry is used to detect both the cations (C⁺) and the anions (A^–) of ionic liquids (CA). In this study, the ionic liquids are diluted with aqueous methanol before injection. In addition to the main peaks of the parent ions, fragmentation products are observed upon increasing the cone voltage, whereas aggregates of the parent ion with one or more ionic liquid molecules (e.g., C(CA)_n⁺, A(CA)_n^–) are observed upon decreasing the cone voltage. The ions of several ionic liquids in a mixture are also detected and the ratios of their concentrations estimated. A method is developed to determine quantitatively the concentration of an ionic liquid in solution by using the cation and anion of another ionic liquid as internal standards. By using this method, the solubilities in water at room temperature (22±1 °C) of three typical hydrophobic ionic liquids have been determined: 0.70±0.08 g L^–1 for methyltributylammonium bis(trifluoromethylsulfonyl)imide (MeBu₃NNTf₂), 6.0±0.5 g L^–1 for butylmethylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BuMePyrNTf₂), and 18.6±0.7 g L^–1 for 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF₆).     

Ionic Liquids Based on Azolate Anions

Compartmentalized molecular level design of new energetic materials based on energetic azolate anions allows for the examination of the effects of both cation and anion on the physiochemical properties of ionic liquids. Thirty one novel salts were synthesized by pairing diverse cations (tetraphenylphosphonium, ethyltriphenylphosphonium, N‐phenyl pyridinium, 1‐butyl‐3‐methylimidazolium, tetramethyl‐, tetraethyl‐, and tetrabutylammonium) with azolate anions (5‐nitrobenzimidazolate, 5‐nitrobenzotriazolate, 3,5‐dinitro‐1,2,4‐triazolate, 2,4‐dinitroimidazolate, 4‐nitro‐1,2,3‐triazolate, 4,5‐dinitroimidazolate, 4,5‐dicyanoimidazolate, 4‐nitroimidazolate, and tetrazolate). These salts have been characterized by DSC, TGA, and single crystal X‐ray crystallography. The azolates in general are surprisingly stable in the systems explored. Ionic liquids were obtained with all combinations of the 1‐butyl‐3‐methylimidazolium cation and the heterocyclic azolate anions studied, and with several combinations of tetraethyl‐ or tetrabutylammonium cations and the azolate anions. Favorable structure–property relationships were most often achieved when changing from 4‐ and 4,5‐disubstituted anions to 3,5‐ and 2,4‐disubstituted anions. The most promising anion for use in energetic ionic liquids of those studied here, was 3,5‐dinitro‐1,2,4‐triazolate, based on its contributions to the entire set of target properties.     

Estimation of the thermal conductivity λ(T,P) of ionic liquids using a neural network optimized with genetic algorithms

In this study, an artificial neural network was optimized using a genetic algorithm in order to estimate the thermal conductivity of ionic liquids at different temperatures and pressures. Experimental thermal conductivity data of 41 ionic liquids (400 experimental data points) in the range from 0.10 to 0.22 W m⁻¹ K⁻¹ were used to obtain the proposed method for the temperature range of 273–390 K and the pressure range of 100–20,000 kPa. In addition, the molecular mass M and structure of molecules, represented by the number of well-defined groups forming the molecule, were provided as input parameters in order to characterize the different molecules of ionic liquids. A heterogeneous set of ionic liquids includes cations such as imidazolium, ammonium, phosphonium, pyrrolidinium, and pyridinium. It also includes anions such as halides, sulfonates, tosylates, imides, borates, phosphates, acetates, and amino acids. The whole dataset was divided into a training set with 300 experimental data points and a prediction set with 100 experimental data points. Several architectures were studied, and the optimum weights for the network were determined. The results showed that the proposed method to estimate the thermal conductivity of ionic liquids at different temperatures and pressures presented a good accuracy with lower deviations such as AARD less than 0.91% and R² of 0.9969 for the training set, and AARD less than 0.84% with R² of 0.9963 for the prediction set.     

A New Category of Liquid Salt--Liquid Ionic Phosphates (LIPs)

Starting with polycationic ammonium and phosphonium salts bearing halide anions previously synthesized in our laboratory, we have prepared a new category of nonaqueous ionic liquids. These new nonaqueous ionic liquids bear either free phosphate anions or partially esterified phosphate anions as the counterions to the ammonium or phosphonium cations. We generally refer to these new species as LIPs (liquid ionic phosphates). We have developed three approaches toward the syntheses of these materials from the halide salts: one using hexafluorophosphoric acid;; a classical ion exchange method; and treatment with the free phosphorus-containing acid under vacuum. The new LIPs, although highly viscous, exhibit significantly high specific conductivities. Unlike ionic liquids bearing tetrafluoroborate of tetrachloroaluminate anions, the LIPs are unreactive toward water. Further, the LIPs bearing simple phosphate anions are soluble in water, unlike their corresponding hexafluorophosphate salts. We have also examined the UV/Vis, fluorescence, and mobility characteristics of the new LIPs.     

Electrochemically stable fluorohydrogenate ionic liquids based on quaternary phosphonium cations

Fluorohydrogenate ionic liquids of quaternary phosphonium cations, tri-n-butylmethylphosphonium (P₄₄₄₁) fluorohydrogenate, tetra-n-butylphosphonium (P₄₄₄₄) fluorohydrogenate, and tri-n-butyl-n-octylphosphonium (P₄₄₄₈) fluorohydrogenate, have been synthesized by the metatheses of anhydrous hydrogen fluoride and the corresponding phosphonium chloride precursors. All the obtained salts have melting points below room-temperature with a vacuum-stable composition of P_444m(FH)_2.3F (m = 1, 4, and 8) and were characterized by density, conductivity, and viscosity measurements. Linear sweep voltammetry with a glassy carbon working electrode shows that the P_444m(FH)_2.3Fs have wide electrochemical windows exceeding 5.2 V. In particular, P₄₄₄₁(FH)_2.3F has an electrochemical window of 6.0 V, which is the widest among fluorohydrogenate ionic liquids reported to date. The thermal stability of these ionic liquids is also improved compared to the salts of N-heterocyclic ammonium cations.     

Novel Cyclic Sulfonium‐Based Ionic Liquids: Synthesis,Characterization, and Physicochemical Properties

A new series of ionic liquids composed of three cyclic sulfonium cations and four anions has been synthesized and characterized. Their physicochemical properties, including their spectroscopic characteristics, ion cluster behavior, surface properties, phase transitions, thermal stability, density, viscosity, refractive index, tribological properties, ion conductivity, and electrochemical window have been comprehensively studied. Eight of these salts are liquids at room temperature, at which some salts based on [NO₃]^? and [NTf₂]^? ions exhibit organic plastic crystal behaviors, and all the saccharin‐based salts display relatively high refractive indices (1.442–1.594). In addition, some ionic liquids with the [NTf₂]^? ion exhibit peculiar spectroscopic characteristics in FTIR and UV/Vis regions, whilst those salts based on the [DCA]^? ion show lower viscosities (34.2–62.6 mPa s at 20 °C) and much higher conductivities (7.6–17.6 mS cm^?1 at 20 °C) than most traditional 1,3‐dialkylimidazolium salts.     

Poly(ionic liquid)s as new materials for CO2 absorption

A series of imidazolium‐based ionic liquid monomers and their corresponding polymers (poly(ionic liquid)s) were synthesized, and their CO₂ sorption was studied. The poly(ionic liquid)s had enhanced CO₂ sorption capacities and fast sorption/desorption rates compared with room temperature ionic liquids. The effects of the chemical structures, including the types of anion, cation, and backbone of the poly(ionic liquid)s on their CO₂ sorption have been discussed. In contrast to room temperature ionic liquids, the polymer with PF anions had the highest CO₂‐sorption capacity, while those with BF or Tf₂N^? anions had the same capacities. The CO₂ sorption and desorption of the polymers were fast and reversible, and the sorption was selective over H₂, N_2, and O₂. The measured Henry's constants of P[VBBI][BF₄] and P[MABI][BF₄] were 26.0 bar and 37.7 bar, which were lower than those of similar room temperature ionic liquids. The preliminary study of the mechanism indicated that the CO₂ sorption of the polymer particles was more absorption (the bulk) but less adsorption (the surface). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5477–5489, 2005     

Synthesis and ionic conductivity of polymer ionic liquids

Four vinyl monomers containing a covalently bonded cation ethylimidazolium and various anions—Br^?, (CF₃SO₂)₂N^?, (CN)₂N^?, and CF₃SO ₃ ^? —have been synthesized. High-molecular-mass polymers (M _w up to 1.84 × 10⁶) having the structure of ionic liquids have been prepared via the free-radical polymerization of 1-vinyl-3-ethylimidazolium in bulk and molecular and ionic solvents. The thermal stability and heat resistance of the resulting polymer salts have been estimated. It has been demonstrated that the thermal characteristics of these salts significantly depend on the nature of anions. The glass-transition temperatures of the polymers range from 19 to 235°C. The ionic conductivity of the polymer salts and their compositions with individual ionic liquids has been studied in the frequency range 50–10⁶ Hz. The highest conductivity (1.5 × 10^?5 S/cm) is exhibited by the polymer containing the (CN)₂N^? anion.     

Ionic Liquid‐Based Routes to Conversion or Reuse of Recycled Ammonium Perchlorate

New, potentially green, and efficient synthetic routes for the remediation and/or re‐use of perchlorate‐based energetic materials have been developed. Four simple organic imidazolium‐ and phosphonium‐based perchlorate salts/ionic liquids have been synthesized by simple, inexpensive, and nonhazardous methods, using ammonium perchlorate as the perchlorate source. By appropriate choice of the cation, perchlorate can be incorporated into an ionic liquid which serves as its own electrolyte for the electrochemical reduction of the perchlorate anion, allowing for the regeneration of the chloride‐based parent ionic liquid. The electrochemical degradation of the hazardous perchlorate ion and its conversion to harmless chloride during electrolysis was studied using IR and ³⁵Cl NMR spectroscopies.