Two‐Dimensional Semiconductors Grown by Chemical Vapor Transport

Developing controlled approaches for synthesizing high‐quality two‐dimensional (2D) semiconductors is essential for their practical applications in novel electronics. The application of chemical vapor transport (CVT), an old single‐crystal growth technique, has been extended from growing 3D crystals to synthesizing 2D atomic layers by tuning the growth kinetics. Both single crystalline individual flakes and continuous films of 1 L MoS₂ were successfully obtained with CVT approach at low growth temperatures of 300–600 °C. The obtained 1 L MoS₂ exhibits high crystallinity and comparable mobility to mechanically exfoliated samples, as confirmed by both atomic resolution microscopic imaging and electrical transport measurements. Besides MoS₂, this method was also used in the growth of 2D WS₂, MoSe₂, Mo_x W_1−x S₂ alloys, and ReS₂, thus opening up a new way for the controlled synthesis of various 2D semiconductors.     

MoS2‐on‐MXene Heterostructures as Highly Reversible Anode Materials for Lithium‐Ion Batteries

Two‐dimensional (2D) heterostructured materials, combining the collective advantages of individual building blocks and synergistic properties, have spurred great interest as a new paradigm in materials science. The family of 2D transition‐metal carbides and nitrides, MXenes, has emerged as an attractive platform to construct functional materials with enhanced performance for diverse applications. Here, we synthesized 2D MoS₂‐on‐MXene heterostructures through in situ sulfidation of Mo₂TiC₂T_x MXene. The computational results show that MoS₂‐on‐MXene heterostructures have metallic properties. Moreover, the presence of MXene leads to enhanced Li and Li₂S adsorption during the intercalation and conversion reactions. These characteristics render the as‐prepared MoS₂‐on‐MXene heterostructures stable Li‐ion storage performance. This work paves the way to use MXene to construct 2D heterostructures for energy storage applications.     

WS2/MoS2 Heterostructures through Thermal Treatment of MoS2 Layers Electrostatically Functionalized with W3S4 Molecular Clusters

The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS₂/MoS₂, has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS₂ flakes is mixed with a methanolic solution of a cationic W₃S₄-core cluster, giving rise to a homogeneous distribution of the clusters over the layers. In a second step, a calcination of this molecular/2D heterostructure under N₂ leads to the formation of clean WS₂/MoS₂ heterostructures, where the photoluminescence of both counterparts is quenched, proving an efficient interlayer coupling. Thus, this chemical method combines the advantages of a solution approach (simple, scalable, and low-cost) with the good quality interfaces reached by using more complicated traditional physical methods.     

Large‐scale Two‐dimensional MoSx Catalyst Prepared under Mild Conditions for Enhancing Electrocatalytic Hydrogen Evolution Reaction

As an electrocatalyst with abundant resources and great potential, molybdenum disulfide is regarded as one of the most likely alternatives to expensive noble‐metals catalysts. However, it is still a challenge to achieve large scale production of few‐layer MoS₂ with enhancing activity of electrocatalytic hydrogen reaction at ambient conditions. Herein, we developed a simple environmentally friendly two‐step method, which included intercalation reaction and a subsequent electrochemical reduction reaction for mass preparation of defect‐rich desulfurized MoS_x (D?MoS_x) nanosheets with plentiful sulfur vacancies. The ratio of sulfur‐molybdenum atoms can be adjusted from 2 : 1 to 1.4 : 1 by regulating the desulfurization voltage. It was found that the HER catalytic activity of the D?MoS_x was enhanced compared with that of pristine MoS₂ (P?MoS₂), the current density of D?MoS_x (desulfurization at ?1.0 V) at ?0.3 V versus RHE was about 169% of the P?MoS₂, and the Tafel slope decreased to 136 mV dec^?1. This method can be widely applied to large‐scale preparation of other two‐dimensional materials.     

Aligned MoOx/MoS2 Core–Shell Nanotubular Structures with a High Density of Reactive Sites Based on Self‐Ordered Anodic Molybdenum Oxide Nanotubes

The present work demonstrates the self‐organized formation of anodic molybdenum oxide nanotube arrays. The amorphous tubes can be crystallized to MoO₂ or MoO₃ and be converted fully or partially into molybdenum sulfide. Vertically aligned MoO_x/MoS₂ nanotubes can be formed when, under optimized conditions, defined MoS₂ sheets form in a layer by layer arrangement that provide a high density of reactive stacking misalignments (defects). These core–shell nanotube arrays consist of a conductive suboxide core and a functional high defect density MoS₂ coating. Such structures are highly promising for applications in electrocatalysis (hydrogen evolution) or ion insertion devices.     

Interface Engineering of MoS2/Ni3S2 Heterostructures for Highly Enhanced Electrochemical Overall‐Water‐Splitting Activity

To achieve sustainable production of H₂ fuel through water splitting, low‐cost electrocatalysts for the hydrogen‐evolution reaction (HER) and the oxygen‐evolution reaction (OER) are required to replace Pt and IrO₂ catalysts. Herein, for the first time, we present the interface engineering of novel MoS₂/Ni₃S₂ heterostructures, in which abundant interfaces are formed. For OER, such MoS₂/Ni₃S₂ heterostructures show an extremely low overpotential of ca. 218 mV at 10 mA cm^?2, which is superior to that of the state‐of‐the‐art OER electrocatalysts. Using MoS₂/Ni₃S₂ heterostructures as bifunctional electrocatalysts, an alkali electrolyzer delivers a current density of 10 mA cm^?2 at a very low cell voltage of ca. 1.56 V. In combination with DFT calculations, this study demonstrates that the constructed interfaces synergistically favor the chemisorption of hydrogen and oxygen‐containing intermediates, thus accelerating the overall electrochemical water splitting.     

A Facile and Universal Top‐Down Method for Preparation of Monodisperse Transition‐Metal Dichalcogenide Nanodots

Despite unique properties of layered transition‐metal dichalcogenide (TMD) nanosheets, there is still lack of a facile and general strategy for the preparation of TMD nanodots (NDs). Reported herein is the preparation of a series of TMD NDs, including TMD quantum dots (e.g. MoS₂, WS₂, ReS₂, TaS₂, MoSe₂ and WSe₂) and NbSe₂ NDs, from their bulk crystals by using a combination of grinding and sonication techniques. These NDs could be easily separated from the N‐methyl‐2‐pyrrolidone when post‐treated with n‐hexane and then chloroform. All the TMD NDs with sizes of less than 10 nm show a narrow size distribution with high dispersity in solution. As a proof‐of‐concept application, memory devices using TMD NDs, for example, MoSe₂, WS₂, or NbSe₂, mixed with polyvinylpyrrolidone as active layers, have been fabricated, which exhibit a nonvolatile write‐once‐read‐many behavior. These high‐quality TMD NDs should have various applications in optoelectronics, solar cells, catalysis, and biomedicine.     

Fabrication of Two‐Dimensional Lateral Heterostructures of WS2/WO3⋅H2O Through Selective Oxidation of Monolayer WS2

Two‐dimensional (2D) lateral heterostructures have emerged as a hot topic in the fast evolving field of advanced functional materials , but their fabrication is challenging. The layer‐structured WS₂ was theoretically demonstrated to be inert to oxidation except for the monolayer, which can be selectively oxidized owing to the simultaneous interaction of oxygen with both sides. Combined with the theoretical calculations, a new method was developed for the successful construction of 2D lateral heterostructures of WS₂/WO₃?H₂O in an ambient environment, based on a simple liquid‐phase solution exfoliation. These lateral heterostructures of WS₂/WO₃?H₂O have interesting properties, as indicated by enhanced photocatalytic activity toward the degradation of methyl orange (MO).     

Ultrathin,Porous and Oxygen Vacancies‐Enriched Ag/WO3−x Heterostructures for Electrocatalytic Hydrogen Evolution

Exploring advanced electrocatalysts for electrocatalytic hydrogen evolution is highly desired but remains a challenge due to the lack of an efficient preparation method and reasonable structural design. Herein, we deliberately designed novel Ag/WO_3?x heterostructures through a supercritical CO₂‐assisted exfoliation‐oxidation route and the subsequent loading of Ag nanoparticles. The ultrathin and oxygen vacancies‐enriched WO_3?x nanosheets are ideal substrates for loading Ag nanoparticles, which can largely increase the active site density and improve electron transport. Besides, the resultant WO_3?x nanosheets with porous structure can form during the electrochemical cycling process induced by an electric field. As a result, the exquisite Ag/WO_3?x heterostructures show an enhanced hydrogen evolution reaction (HER) activity with a low onset overpotential of ≈30 mV, a small Tafel slope of ≈40 mV dec^?1 at 10 mA cm^?2, and as well as long‐term durability. This work sheds light on material design and preparation, and even opens up an avenue for the development of high‐efficiency electrocatalysts.     

High‐Resolution Electrochemical Mapping of the Hydrogen Evolution Reaction on Transition‐Metal Dichalcogenide Nanosheets

High‐resolution scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze the hydrogen evolution reaction (HER) catalytically active sites of 1H‐MoS₂ nanosheets, MoS₂, and WS₂ heteronanosheets. Using a 20 nm radius nanopipette and hopping mode scanning, the resolution of SECCM was beyond the optical microscopy limit and visualized a small triangular MoS₂ nanosheet with a side length of ca. 130 nm. The electrochemical cell provides local cyclic voltammograms with a nanoscale spatial resolution for visualizing HER active sites as electrochemical images. The HER activity difference of edge, terrace, and heterojunction of MoS₂ and WS₂ were revealed. The SECCM imaging directly visualized the relationship of HER activity and number of MoS₂ nanosheet layers and unveiled the heterogeneous aging state of MoS₂ nanosheets. SECCM can be used for improving local HER activities by producing sulfur vacancies using electrochemical reaction at the selected region.     

Metal–Organic Frameworks Constructed from Versatile [WS4Cux]x−2 Units: Micropores in Highly Interpenetrated Systems

Five metal–organic frameworks (MOFs) formed by [WS₄Cu_x]^x?2 secondary building units (SBUs) and multi‐pyridyl ligands are presented. The [WS₄Cu_x]^x?2 SBUs function as network vertexes showing various geometries and connectivities. Compound 1 contains one‐dimensional channels formed in fourfold interpenetrating diamondoid networks with a hexanuclear [WS₄Cu₅]³⁺ unit as SBU, which shows square‐pyramidal geometry and acts as a tetrahedral node. Compound 2 contains brick‐wall‐like layer also with a hexanuclear [WS₄Cu₅]³⁺ unit as SBU. The [WS₄Cu₅]³⁺ unit in 2 is a new type of [WS₄Cu_x]^x?2 cluster unit in which the five Cu⁺ ions are in one plane with the W atom, forming a planar unit. Compound 3 shows a nanotubular structure with a pentanuclear [WS₄Cu₄]²⁺ unit as SBU, which is saddle‐shaped and acts as a tetrahedral node. Compound 4 contains large cages formed between two interpenetrated (10,3)‐a networks also with a pentanuclear [WS₄Cu₄]²⁺ unit acting as a triangular node. The [WS₄Cu₄]²⁺ unit in 4 is isomeric to that in 3 and first observed in a MOF. Compound 5 contains zigzag chains with a tetrahedral [WS₄Cu₃]⁺ unit as SBU, which acts as a V‐shaped connector. The influence of synthesis conditions including temperature, ligand, anions of Cu^I salts, and the ratio of [NH₄]₂WS₄ to Cu^I salt on the formation of these [WS₄Cu_x]^x?2‐based MOFs were also studied. Porous MOF 3 is stable upon removal and exchange of the solvent guests, and when accommodating different solvent molecules, it exhibits specific colors depending on the polarity of incorporated solvent, that is, it shows a rare solvatochromic effect and has interesting prospects in sensing applications.     

Misfit‐Layered Bi1.85Sr2Co1.85O7.7−δ for the Hydrogen Evolution Reaction: Beyond van der Waals Heterostructures

Recent research on stable 2D nanomaterials has led to the discovery of new materials for energy‐conversion and energy‐storage applications. A class of layered heterostructures known as misfit‐layered chalcogenides consists of well‐defined atomic layers and has previously been applied as thermoelectric materials for use as high‐temperature thermoelectric batteries. The performance of such misfit‐layered chalcogenides in electrochemical applications, specifically the hydrogen evolution reaction, is currently unexplored. Herein, a misfit‐layered chalcogenide consisting of CoO₂ layers interleaved with an SrO–BiO–BiO–SrO rock‐salt block and having the formula Bi_1.85Sr₂Co_1.85O_7.7?δ is synthesized and examined for its structural and electrochemical properties. The hydrogen‐evolution performance of misfit‐layered Bi_1.85Sr₂Co_1.85O_7.7?δ, which has an overpotential of 589 mV and a Tafel slope of 51 mV per decade, demonstrates the promising potential of misfit‐layered chalcogenides as electrocatalysts instead of classical carbon.     

Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.     

Embedding Amorphous Molybdenum Sulfide within a Porous Poly(3,4‐ethylenedioxythiophene) Matrix to Enhance its H2‐evolving Catalytic Activity and Robustness

Amorphous molybdenum sulfide (MoS_x) is a promising alternative to Pt catalyst for the H₂ evolution in water. However, it is suffered of an electrochemical corrosion. In this report, we present a strategy to tack this issue by embedding the MoS_x catalyst within a porous poly(3,4‐ethylenedioxythiophene) (PEDOT) matrix. The PEDOT host is firstly grown onto a fluorine‐doped tin oxide (FTO) electrode by electrochemical polymerization of EDOT monomer in an acetonitrile solution to perform a porous structure. The MoS_x catalyst is subsequently deposited onto the PEDOT by an electrochemical oxidation of [MoS₄]^2? monomer. In a 0.5 M H₂SO₄ electrolyte solution, the MoS_x/PEDOT shows higher H₂‐evolving catalytic activities (current density of 34.2 mA/cm² at ?0.4 V vs RHE) in comparison to a pristine MoS_x grown on a planar FTO electrode having similar catalyst loading (24.2 mA/cm²). The PEDOT matrix contributes to enhance the stability of MoS_x catalyst by a significant manner. As such, the MoS_x/PEDOT retains 81 % of its best catalytic activity after 1000 potential scans from 0 to ?0.4 V vs. RHE, whereas a planar MoS_x catalyst is completely degraded after about 240 potential scans, due to its complete corrosion.     

Enhanced Photocatalytic Performance of ZnO Nanorods Coupled by Two‐Dimensional α‐MoO3 Nanoflakes under UV and Visible Light Irradiation

We exploit the utilization of two‐dimensional (2D) molybdenum oxide nanoflakes as a co‐catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α‐MoO₃ were synthesized through a sonication‐aided exfoliation technique. The 2D MoO₃ nanoflakes can be further converted to substoichiometric quasi‐metallic MoO_3?x by using UV irradiation. Subsequently, 1D–2D MoO₃/ZnO NR and MoO_3?x/ZnO NR composite photocatalysts have been successfully synthesized. The photocatalytic performances of the novel nanosystems in the decomposition of methylene blue are studied by using UV‐ and visible‐illumination setup. The incorporated 2D nanoflakes show a positive influence on the photocatalytic activity of the ZnO. The obtained rate constant values follow the order of pristine ZnO NR<MoO₃/ZnO NR<MoO_3?x/ZnO NR composites. The enhancement of the photocatalytic efficiency can be ascribed to a fast charge carrier separation and transport within the heterojunctions of the MoO₃/ZnO NRs. In particular, the best photocatalytic performance of the MoO_3?x/ZnO NR composite can be additionally attributed to a quasi‐metallic conductivity and substoichiometry‐induced mid‐gap states, which extend the light absorption range. A tentative photocatalytic degradation mechanism was proposed. The strategy presented in this work not only demonstrates that coupling with nanoscale molybdenum oxide nanoflakes is a promising approach to significantly enhance the photocatalytic activity of ZnO but also hints at new type of composite catalyst with extended applications in energy conversion and environmental purification.     

Two‐Dimensional Core‐Shelled Porous Hybrids as Highly Efficient Catalysts for the Oxygen Reduction Reaction

Two‐dimensional (2D) transition‐metal dichalcogenides (TMDs) have drawn much attention due to their unique physical and chemical properties. Using TMDs as templates for the generation of 2D sandwich‐like materials with remarkable properties still remains a great challenge due to their poor solvent processability. Herein, MoS₂‐coupled sandwich‐like conjugated microporous polymers (M‐CMPs) with high specific surface area were successfully developed by using functionalized MoS₂ nanosheets as template. As‐prepared M‐CMPs were further used as precursors for preparation of MoS₂‐embedded nitrogen‐doped porous carbon nanosheets, which were revealed as novel electrocatalysts for oxygen reduction reaction with mainly four‐electron transfer mechanism and ultralow half‐wave potential in comparison with commercial Pt/C catalyst. Our strategy to core–shelled sandwich‐like hybrids paves a way for a new class of 2D hybrids for energy conversion and storage.     

Composite electrocatalyst Mo<Subscript>x</Subscript>W<Subscript>1-x</Subscript>S<Subscript>2</Subscript> nanosheets on carbon fiber paper for highly efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) or tungsten disulfide (WS₂), as a promising catalyst, is widely investigated for hydrogen evolution reaction (HER). In this work, a composite electrocatalysts Mo_xW_1-xS₂ is successfully decorated on carbon fiber paper (CFP) through a facile hydrothermal method. The three-dimensional porous CFP can enable the diffusion and penetration of electrolyte. Comparing with MoS₂ and WS₂ catalyst, the composite electrocatalyst Mo_xW_1-xS₂ nanosheets can expose the large number of electrochemically active sites. Hence, the as-prepared Mo_xW_1-xS₂/CFP (3:1) exhibit the outstanding HER catalytic activity with the small Tafel slope of 68 mV dec^?1 and the low overpotential of ??178.4?±?0.5 mV at a current density of 10 mA cm^?2. Chronoamperometric current test for 18 h confirm the long-term stability of the composite electrocatalyst.     

Facile Preparation of WO3−x Dots with Remarkably Low Toxicity and Uncompromised Activity as Co‐reactants for Clinical Diagnosis by Electrochemiluminescence

The exceptional nature of WO_3?x dots has inspired widespread interest, but it is still a significant challenge to synthesize high‐quality WO_3?x dots without using unstable reactants, expensive equipment, and complex synthetic processes. Herein, the synthesis of ligand‐free WO_3?x dots is reported that are highly dispersible and rich in oxygen vacancies by a simple but straightforward exfoliation of bulk WS₂ and a mild follow‐up chemical conversion. Surprisingly, the WO_3?x dots emerged as co‐reactants for the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ with a comparable ECL efficiency to the well‐known Ru(bpy)₃²⁺/tripropylamine (TPrA) system. Moreover, compared to TPrA, whose toxicity remains a critical issue of concern, the WO_3?x dots were ca. 300‐fold less toxic. The potency of WO_3?x dots was further explored in the detection of circulating tumor cells (CTCs) with the most competitive limit of detection so far.     

Atomically Thin Arsenene and Antimonene: Semimetal–Semiconductor and Indirect–Direct Band‐Gap Transitions

The typical two‐dimensional (2D) semiconductors MoS₂, MoSe₂, WS₂, WSe₂ and black phosphorus have garnered tremendous interest for their unique electronic, optical, and chemical properties. However, all 2D semiconductors reported thus far feature band gaps that are smaller than 2.0 eV, which has greatly restricted their applications, especially in optoelectronic devices with photoresponse in the blue and UV range. Novel 2D mono‐elemental semiconductors, namely monolayered arsenene and antimonene, with wide band gaps and high stability were now developed based on first‐principles calculations. Interestingly, although As and Sb are typically semimetals in the bulk, they are transformed into indirect semiconductors with band gaps of 2.49 and 2.28 eV when thinned to one atomic layer. Significantly, under small biaxial strain, these materials were transformed from indirect into direct band‐gap semiconductors. Such dramatic changes in the electronic structure could pave the way for transistors with high on/off ratios, optoelectronic devices working under blue or UV light, and mechanical sensors based on new 2D crystals.