Template‐Free Synthesis of a Molecular Solomon Link by Two‐Component Self‐Assembly

A molecular Solomon link was synthesized in high yield through the template‐free, coordination‐driven self‐assembly of a carbazole‐functionalized donor and a tetracene‐based dinuclear ruthenium(II) acceptor. The doubly interlocked topology was realized by a strategically chosen ligand which was capable of participating in multiple CH ??? π and π–π interactions, as evidenced from single‐crystal X‐ray analysis and computational studies. This method is the first example of a two‐component self‐assembly of a molecular Solomon link using a directional bonding approach. The donor alone was not responsible for the construction of the Solomon link, and was confirmed by its noncatenane self‐assemblies obtained with other similar ruthenium(II) acceptors.     

The Self‐Sorting Behavior of Circular Helicates and Molecular Knots and Links

We report on multicomponent self‐sorting to form open circular helicates of different sizes from a primary monoamine, Fe^II ions, and dialdehyde ligand strands that differ in length and structure by only two oxygen atoms. The corresponding closed circular helicates that are formed from a diamine—a molecular Solomon link and a pentafoil knot—also self‐sort, but up to two of the Solomon‐link‐forming ligand strands can be accommodated within the pentafoil knot structure and are either incorporated or omitted depending on the stage that the components are mixed.     

Self‐Assembly of a Giant Molecular Solomon Link from 30 Subcomponents

The synthesis of topologically complex structures, such as links and knots, is one of the current challenges in supramolecular chemistry. The so‐called Solomon link consists of two doubly interlocked rings. Despite being a rather simple link from a topological point of view, only few molecular versions of this link have been described so far. Here, we report the quantitative synthesis of a giant molecular Solomon link from 30 subcomponents. The highly charged structure is formed by assembly of 12 cis‐blocked Pt²⁺ complexes, six Cu⁺ ions, and 12 rigid N‐donor ligands. Each of the two interlocked rings is composed of six repeating Pt(ligand) units, while the six Cu⁺ ions connect the two rings. With a molecular weight of nearly 12 kDa and a diameter of 44.2 Å, this complex is the largest non‐DNA‐based Solomon link described so far. Furthermore, it represents a molecular version of a “stick link”.     

Dynamic Interconversion between Solomon Link and Trapezoidal Metallacycle Ensembles Accompanying Conformational Change of the Linker

A novel template-free Cp*Rh-based molecular Solomon link has been established through selection of the flexible ligand L as a linker and the half-sandwich rhodium(III) dinuclear fragment B1 as a rigid capping unit. Furthermore, we demonstrate that the self-assembly of the Solomon link based on the flexible ligand is both solvent- and concentration-dependent: the Solomon link is formed in concentrated methanolic solutions, whereas formation of a dinuclear trapezoidal rectangle is favored at low concentrations or in acetonitrile or DMF solutions. Remarkably, alteration of the solvent or concentration can promote a unique and dynamic interconversion between the two molecular species, accompanying conformational change of the ligand. The synthetic outcomes are supported by single-crystal X-ray diffraction analysis.     

Pt(II) Complexes with Azolate‐containing Bidentate Chelate: Design,Photophysics, and Application

This review is aimed at the current research progression of a unique class of Pt(II ) metal complexes bearing at least one azolate‐containing bidentate chelate. The azole fragment can link to a neutral heteroaromatic entity or another azole and form bidentate chelates, such as monoanionic 3‐pyridyl‐1H ‐pyrazole and derivatives, dianionic 3,3′‐bi‐1H ‐pyrazole, 3,3′‐(1‐methylethylidene)‐bis‐1H ‐pyrazole, and their analogs. These azole‐containing chelates readily react with a variety of Pt(II) reagents to afford the corresponding bis‐bidentate Pt(II) complexes. Most of them were highly emissive in solution, doped polymer matrix, thin film, and even as crystal or powder, due to the high ligand field strength exerted by these chelates and their high propensity in forming the singular square‐planar architecture and intermolecular aggregates with substantially strengthened Pt⋯Pt interaction, according to their structural design. Therefore, they hold bright prospects in academic research and future optoelectronic applications such as organic light‐emitting diodes.     

Coordination Chemistry of Acrylamide: 1. Cobalt(II) Chloride Complexes with Acrylamide – Synthesis and Crystal Structures

The molecular structures of blue dichloro‐tetrakis(acrylamide) cobalt(II), [Co{O‐OC(NH₂)CH=CH₂}₄Cl₂] ( 1 ) and pink hexakis(acrylamide)cobalt(II) tetrachlorocobaltate(II), [Co{O‐OC‐(NH₂)CH=CH₂}₆][CoCl₄] ( 2 ), characterized by single X‐ray diffraction, IR spectroscopy and elemental analyses, are described. The coordination of Co^II in 1 involves a tetragonally distorted octahedral structure with four O‐donor atoms of acrylamide in the equatorial positions and two chloride ions in the apical positions. The second complex 2 in ionic form contains Co^II cations surrounded by an octahedral array of O‐coordinated acrylamide ligands, accompanied by a [CoCl₄]^2? anion.     

Synthesis,Spectral, Thermal and Biological Studies of Mn(II), Co(II), Ni(II) and Cu(II) Complexes with 1‐(((5‐Mercapto‐1H‐1,2,4‐triazol‐3‐yl)imino)‐methyl)naphthalene‐2‐ol

Mn(II), Co(II), Ni(II) and Cu(II) complexes of 5‐mercapto‐1,2,4‐triazol‐3‐imine‐2′‐hydroxynaphthaline have been synthesized and characterized by elemental analysis, IR, ¹H NMR, EI‐mass, UV‐Vis, and ESR (electron spin resonance) spectra, molar conductance, magnetic moment measurements, DC conductivity and thermogravimetric analysis. IR spectra confirm that the ligand molecule existed in both thione and thiole forms. The molar conductance values indicate the complexes are nonelectrolyte. The magnetic moment values of the complexes display paramagnetic behavior. All studies confirm the formation of an octahedral geometry for complex 1 and the other complexes have tetrahedral geometrical structures. The structures of the complexes have also been theoretically studied by using the molecular mechanic calculations by the hyperchem. 8.03 molecular modeling program which confirm the proposed structures. The Schiff‐base ligand and its metal complexes have also been screened for their antimicrobial activities.     

Chains,Necklaces and Weaving Chain‐link Grids from Self‐Assembly Reactions

Assembly of two ditopic units, a phenanthroline substituted by 4‐ethynyl pyridines at the 2‐and 9‐positions and a dimetallic paddlewheel, gives a linear chain polymer rather than a closed cyclic species, which would appear equally possible. The chain may be decorated by binding a copper‐containing macrocycle around the phenanthroline units to form a polypseudorotaxane. When two phenanthroline ligands are assembled in a first step around copper(I), the paddlewheel acceptor can link them in a second step to form a two‐dimensional interwoven grid that resembles the form of a chain‐link fence. Each copper(I) centre in this structure is chiral, and the crystal shows complete homochirality, implying selection during the assembly process.     

Synchronized On/Off Switching of Four Binding Sites for Water in a Molecular Solomon Link

A molecular Solomon link adopts different conformations in acetonitrile ( 1 ) and in water ( 2 ). Contrary to expectations, the main driving force of the transformation is not the change in medium polarity, but the cooperative binding of about four molecules of water, forming a tiny droplet in the central cavity of 2 . Mechanistic studies reveal that the four binding sites can simultaneously switch between an inactive state (unable to bind water) and an active state (able to bind water) during the transformation. Spatial and temporal coordination of switching events is commonly observed in biological systems but has been rarely achieved in artificial systems. Here, the concerted activation of the four switchable sites is controlled by the topology of the whole molecule.     

Physicochemical characterization of nanobidentate ferrocene‐based Schiff base ligand and its coordination complexes: Antimicrobial,anticancer, density functional theory,and molecular operating environment studies

A novel bidentate Schiff base ligand (HL, Nanobidentate Ferrocene based Schiff base ligand L (has one replaceable proton H)) was prepared via the condensation of 2‐amino phenol with 2‐acetyl ferrocene. The ligand was characterized using elemental analysis, mass spectrometry, infrared (IR) spectroscopy, ¹proton nuclear magnetic resonance (H‐NMR) spectroscopy, scanning electron microscopy (SEM), and thermal analysis. The corresponding 1:1 metal complexes with some transition‐metal ions were additionally characterized by their elemental analysis, molar conductance, SEM, and thermogravimetric ana1ysis (TGA). The complexes had the general formula [M(L)(Cl)(H₂O)₃]xCl·nH₂O (M = Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), and Cd(II)), (x = 0 for Mn(II), Co(II), Ni(II), Cu(II), Zn(II), and Cd(II), x = 1 for Cr(III) and Fe(III)), (n = 1 for Cr(III), n = 3 for Mn(II) and Co(II), n = 4 for Fe(III), Ni(II), Cu(II), Zn(II), and Cd(II)). Density functional theory calculations on the HL ligand were also carried out in order to clarify molecular structures by the B31YP exchange‐correlation function. The results were subjected to molecular orbital diagram, highest occupied mo1ecu1ar orbital–lowest occupied molecular orbital, and molecular electrostatic potential calculations. The parent Schiff base and its eight metal complexes were assayed against four bacterial species (two Gram‐negative and two‐Gram positive) and four different antifungal species. The HL ligand was docked using molecular operating environment 2008 with crystal structures of oxidoreductase (1CX2), protein phosphatase of the fungus Candida albicans (5JPE), Gram(?) bacteria Escherichia coli (3T88), Gram(+) bacteria Staphylococcus aureus (3Q8U), and an androgen‐independent receptor of prostate cancer (1GS4). In order to assess cytotoxic nature of the prepared HL ligand and its complexes, the compounds were screened against the Michigan cancer foundation (MCF)‐7 breast cancer cell line, and the IC₅₀ values of compounds were calculated.     

Synthesis,Crystal Structures,Thermal and Magnetic Properties of New Selenocyanato Coordination Polymers with Pyrazine as Co‐Ligand

Reaction of iron(II), cobalt(II) and nickel(II) selenocyanate with pyrazine in water at room temperature leads to the formation of the isotypic new ligand‐rich 1:2 (1:2 = ratio between metal and co‐ligand) compounds [M(NCSe)₂(pyrazine)₂]_n (M = Fe ( 1 ), Co ( 2 ), Ni ( 3 )). The crystal structure of 2 was determined by X‐ray single crystal analysis and those of 1 and 3 were refined from X‐ray powder data with the Rietveld method. In their crystal structure the metal(II) cations are coordinated by four pyrazine co‐ligands, which connect them into layers, and two terminally N‐bonded selenocyanato anions in a distorted octahedral arrangement. The terminal coordination mode of the selenocyanato anions was further emphasized by IR spectroscopic investigations. On heating, all compounds decompose in a single heating step without the formation of ligand‐deficient intermediates like previously reported for related thiocyanato compounds. Magnetic measurements of compound 1 show a long‐range antiferromagnetic ordering with an ordering temperature of T_N = 6.7 K, which must be mediated by the aromatic π‐system of the pyrazine ligand, whereas 2 and 3 show only Curie–Weiss behavior with antiferromagnetic exchange interactions.     

Stepwise Halide‐Triggered Double and Triple Catenation of Self‐Assembled Coordination Cages

A simple self‐assembled [Pd₂ L ₄] coordination cage consisting of four carbazole‐based ligands was found to dimerize into the interpenetrated double cage [3 X@Pd₄ L ₈] upon the addition of 1.5 equivalents of halide anions (X=Cl^?, Br^?). The halide anions serve as templates, as they are sandwiched by four Pd^II cations and occupy the three pockets of the entangled cage structure. The subsequent addition of larger amounts of the same halide triggers another structural conversion, now yielding a triply catenated link structure in which each Pd^II node is trans‐coordinated by two pyridine donors and two halide ligands. This simple system demonstrates how molecular complexity can increase upon a gradual change of the relative concentrations of reaction partners that are able to serve different structural roles.     

Reaction mechanism of Ru(II) piano‐stool complexes: Umbrella sampling QM/MM MD study

Biologically relevant interactions of piano‐stool ruthenium(II) complexes with ds‐DNA are studied in this article by hybrid quantum mechanics—molecular mechanics (QM/MM) computational technique. The whole reaction mechanism is divided into three phases: (i) hydration of the [Ru^II(η⁶‐benzene)(en)Cl]⁺ complex, (ii) monoadduct formation between the resulting aqua‐Ru(II) complex and N7 position of one of the guanines in the ds‐DNA oligomer, and (iii) formation of the intrastrand Ru(II) bridge (cross‐link) between two adjacent guanines. Free energy profiles of all the reactions are explored by QM/MM MD umbrella sampling approach where the Ru(II) complex and two guanines represent a quantum core, which is described by density functional theory methods. The combined QM/MM scheme is realized by our own software, which was developed to couple several quantum chemical programs (in this study Gaussian 09) and Amber 11 package. Calculated free energy barriers of the both ruthenium hydration and Ru(II)‐N7(G) DNA binding process are in good agreement with experimentally measured rate constants. Then, this method was used to study the possibility of cross‐link formation. One feasible pathway leading to Ru(II) guanine‐guanine cross‐link with synchronous releasing of the benzene ligand is predicted. The cross‐linking is an exergonic process with the energy barrier lower than for the monoadduct reaction of Ru(II) complex with ds‐DNA. © 2014 Wiley Periodicals, Inc.     

Tridentate Complexes of Palladium(II) and Platinum(II) Bearing bis‐Aryloxide Triazole Ligands: A Joint Experimental and Theoretical Investigation

A novel class of palladium(II) and platinum(II) complexes bearing tridentate bis‐aryloxide triazole ligands was prepared by using straightforward and high‐yielding synthetic routes. The complexes were fully characterized and the molecular structures of four derivatives were unambigously determined by single‐crystal X‐ray diffractometric analyses. For the most promising luminescent Pt^II derivatives, further experimental investigations were carried out to characterize their photophysical features and to ascertain the nature of the emitting excited state by means of electronic absorption, steady‐state, and time‐resolved emission techniques in different conditions. In degassed fluid solution the complexes displayed broad and featureless photoluminescence with λ_em=522–585 nm, excited‐state lifetime up to few microseconds and quantum yield (PLQY) up to 17 %, depending on the nature of both ancillary ligand and substituent on the tridentate ligand. Computational investigation using density functional theory and time‐dependent DFT were performed to gain insight into the electronic processes responsible for optical transitions and structure–photoluminescence relationship. Jointly, experimental and theoretical characterization indicated that the radiative transition arises from an excited state with admixed triplet‐manifold metal‐to‐ligand charge transfer and ligand‐centered (³MLCT/³LC) character. We elucidated the modulation of the photophysical properties upon variation of substituents for this new family of complexes.     

Chiral Heteroditopic Baskets Designed from Triazolated Calixarenes and Short Peptides

Cone calix[4]arenes and calix[6]arenes bearing two, three, and four short peptide units each having two chiral carbon atoms were prepared. The syntheses were performed by using an efficient modular approach that includes the Ugi preparation of the azido‐peptide followed by its reactions with the propargylated calixarenes under CuAAC (Cu^I‐catalyzed azide–alkyne cycloaddition) conditions. The three novel multitopic hosts were probed for their ability to bind metal ions by UV titration, and showed the highest complexation efficiency towards copper(II) and lead(II). These two cations possessed quite different complexation modes with copper(II) bound predominantly by multiple‐triazole sites, in contrast to lead(II), which is stabilized mainly by multiple interactions with amide groups of the peptide units. Circular dichroism data for the free chiral hosts, their equimolar mixtures with copper(II) perchlorate and lead(II) perchlorate, and for tertiary mixtures of all three compounds showed the formation of mono‐ and binuclear complexes, or a switching behavior, depending on the structure of the host and the addition order of the cations.     

Surface‐Junction Effects on Interfacial Electron Transfer between Bis(terpyridine)iron(II) and Hydrogen‐Terminated Silicon(111) Electrode

Interfacial electron transfer at bis(tpy)–iron(II) complexes (tpy=2,2′:6′,2′′‐terpyridine) on Si(111) electrodes was investigated by using four types of surface‐anchor terpyridine ligands. Despite the greater distance, electron transfer between the bis(tpy)–iron(II) unit and the electrode is accelerated in surface‐anchor ligands with an additional phenylene group.     

Novel Transition‐Metal (M=Cr,Mo, W,Fe) Carbonyl Complexes with Bis(guanidinato)silicon(II) Ligands

The donor‐stabilized silylene 2 (the first bis(guanidinato)silicon(II ) complex) reacts with the transition‐metal carbonyl complexes [M(CO)₆] (M=Cr, Mo, W) to form the respective silylene complexes 7 – 10 . In the reactions with [M(CO)₆] (M=Cr, Mo, W), the bis(guanidinato)silicon(II ) complex 2 behaves totally different compared with the analogous bis(amidinato)silicon(II ) complex 1 , which reacts with [M(CO)₆] as a nucleophile to replace only one of the six carbonyl groups. In contrast, the reaction of 2 leads to the novel spirocyclic compounds 7 – 9 that contain a four‐membered SiN₂C ring and a five‐membered MSiN₂C ring with a M?Si and M?N bond (nucleophilic substitution of two carbonyl groups). Compounds 7 – 10 were characterized by elemental analyses (C, H, N), crystal structure analyses, and NMR spectroscopic studies in the solid state and in solution.     

Synthesis of a Five‐Membered Molecular Necklace: A 2+2 Approach

Like with a string of pearls , four molecular “beads” are threaded on a molecular rectangle to form a molecular necklace. This rectangular species is synthesized from two L‐shaped, preorganized pseudorotaxanes with two molecular beads each (cucurbituril, schematically symbolized by the barrels), held together by Cu²⁺ ions [Eq. (1)].     

Polymerization of Vinyl Ethers by Iron(II) and Cobalt(II) Pyridyl Bis(imine) Complexes in the Presence of Methylaluminoxane

Summary: The polymerizations of ethyl vinyl ether, n‐butyl vinyl ether and isobutyl vinyl ether were investigated with a series of pyridine bis(imine) complexes of iron(II ) and cobalt(II ) in the presence of methylaluminoxane. The cobalt catalysts showed much higher activity and produced higher molecular weight polymers than their iron analogues. Both catalyst systems produced predominantly atactic polymers. There were no specific trends in the activity and the polymer molecular weight, according to the steric bulk around the metal center.

The iron(II ) and cobalt(II ) catalysts used here.     

5‐Acetyl‐2‐amino‐6‐methyl‐4‐(3‐nitrophenyl)‐4H‐pyran‐3‐carbonitrile and 2‐amino‐5‐ethoxycarbonyl‐6‐methyl‐4‐(3‐nitrophenyl)‐4H‐pyrano‐3‐carbonitrile

The structures of the title compounds, C₁₅H₁₃N₃O₄, (I), and C₁₆H₁₅N₃O₅ [IUPAC name: ethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(3‐nitro­phenyl)‐4H‐pyrano‐3‐carboxyl­ate], (II), are very similar, with the heterocyclic rings adopting boat conformations. The pseudo‐axial m‐nitro­phenyl substituents are rotated by 84.0 (1) and 98.7 (1)° in (I) and (II), respectively, with respect to the four coplanar atoms of the boat. The dihedral angles between the phenyl rings and nitro groups are 12.1 (2) and 8.4 (2)° in (I) and (II), respectively. The two compounds have similar patterns of intermolecular N—H?O and N—H?N hydrogen bonding, which link mol­ecules into infinite tapes along b .