Enantioseparation of chiral N-imidazole derivatives by electrokinetic chromatography using highly sulfated cyclodextrins: mechanism of enantioselective recognition

Baseline separation of ten new substituted [1-(imidazo-1-yl)-1-phenylmethyl)] benzothiazolinone and benzoxazolinone derivatives, with one chiral center, was achieved by CD-EKC using highly sulfated CDs (alpha, beta, gamma highly S-CDs) as chiral selectors. The influence of the type and concentration of the chiral selectors on the enantioseparations was investigated. The highly S-CDs exhibit a very high enantioselectivity power since they allow excellent enantiomeric resolutions compared to those obtained with the neutral CDs. The enantiomers were resolved with analysis times inferior to 2.5 min and resolution factors R(s) of 3.73, 3.90, 1.40, and 4.35 for compounds 1, 2, 3, and 5, respectively, using 25 mM phosphate buffer at pH 2.5 containing either highly S-alpha-CD, highly S-beta-CD, and highly S-gamma-CD (3 or 4% w/v) at 298 K, with an applied field of 0.30 kV/cm. The determination of the enantiomer migration order for the various analytes and the study of the analyte structure-enantioseparation relationships display the high contribution of the interactions between the analytes phenyl ring and the CDs to the enantiorecognition process. The thermodynamic study of the analyte-CD affinities permits us to improve our knowledge about the enantioseparation mechanism.     

An observation of unusual temperature effects for enantioselective CZE employing highly sulfated-beta-cyclodextrin

In this paper data are presented suggesting that for enantiomers of basic and neutral analytes, the concentrations of highly sulfated CDs typically used are above the optimum since lower concentrations result in unacceptable migration times. This situation arises because of the high binding affinities often obtained with sulphated CDs. In a system being over the optimum CD concentration increasing the temperature of the capillary offers a capability to improve selectivity and reduce migration times.     

Retention behaviour of peptides in capillary electrochromatography using an embedded ammonium in dodecacyl stationary phase

A highly water-soluble new cyclodextrin (CD) derivative 2-O-acetonyl-2-O-hydroxypropyl-beta-CD (2-AHP-beta-CD) was synthesized and tested as an effective chiral selector for the capillary zone electrophoretic resolution (Rs) of several basic and acidic analytes. The primary purpose of the research was to explore the capability of the 2-AHP-beta-CD as chiral selectors on comparison with the neutral CDs such as beta-CD, DM-beta-CD and HP-beta-CD. Substitution with 2-O-acetonyl-2-O-hydroxypropyl group at the secondary hydroxyl sites of the CD is aimed at influencing the magnitude and selectivity of analyte-CD interactions. The chiral resolution was strongly influenced by the concentration of the CDs and buffer pH. 2-AHP-beta-CD showed the best enantiomer resolution properties among the tested compounds, while the other CDs showed inferior or no performances at all.     

Water-soluble cyclodextrin polymers for enhanced relative recovery of hydrophobic analytes during microdialysis sampling

Microdialysis relative recovery (RR) enhancement using different water-soluble, epichlorohydrin-based cyclodextrin polymers (CD-EPS) was studied in vitro for different analytes, amitryptiline, carbamazepine, hydroquinone, ibuprofen, and 4-nitrophenol. When compared to the native CDs (alpha, beta, and gamma) on a per mole basis, the CD-EPS enhanced microdialysis RR was either statistically greater or the same. beta-CD-EPS was more highly retained than native beta-CD by a 20 000 Da molecular weight cutoff (MWCO) polycarbonate membrane, but showed no statistical difference for loss across a 100 000 Da MWCO polyethersulfone membrane (PES). When the same weight percent of beta-CD or beta-CD-EPS was included in the microdialysis perfusion fluid, the beta-CD-EPS produced a higher microdialysis RR than native beta-CD for all analytes across the PES membrane. However, enhancements for the PC membrane were statistically insignificant when beta-CD and beta-CD-EPS were compared on a per mole basis. These results suggest that CD-EPS may be used as effective enhancement agents during microdialysis sampling and for some membranes provide the additional advantage of being retained more than native CDs.     

Simultaneous enantioseparation of four beta2-agonists by capillary electrophoresis with cyclodextrin additives. Study of the enantioselective mechanism

The simultaneous capillary electrophoretic enantioseparation of adrenergic beta(2)-agonists enantiomers (trantinterol, mabuterol, clenbuterol, bambuterol) was studied with beta-cyclodextrin, ethyl-beta-CD, methyl-beta-CD, hydroxypropyl-beta-CD, and hydroxyethyl-beta-CD as chiral selector. The type and concentration of the chiral selector and buffer pH played a very important role in the enantioseparation of the analyzed compounds. Hydroxypropyl-beta-CD was found to be the most effective complexing agent and allowed excellent chiral/achiral resolutions compared to the other CDs. The simultaneous enantioseparation of four beta(2)-agonists was achieved using 100 mM citric acid-10 mM Na(2)HPO(4) buffer at pH 2.5 containing 120 mM hydroxypropyl-beta-CD with an applied voltage of 20 kV. Method validation in terms of repeatability, linearity, and limits of detection and quantification was performed. The effect of structural features of analytes on R(s) and t(m) was studied. Complexation binding constants for the interactions between the four compounds and three different CDs were evaluated for elucidating the enantioseparation mechanism. It was found that very small differences in the chemical structure of the analytes resulted in significant changes in stereoselective recognition.     

Synthesis and application of single-isomer 6-mono(alkylimidazolium)-beta-cyclodextrins as chiral selectors in chiral capillary electrophoresis

Novel single isomers of positively charged beta-CDs were prepared via nucleophilic substitution of 6-monotosyl-beta-CD with alkylimidazoles to afford 6-mono(alkylimidazolium)-beta-CD tosylates and then 6-mono(alkylimidazolium)-beta-CD chlorides by anion exchange. The chiral resolution abilities of these cationic CDs were studied by CE using dansyl (Dns)-amino acids as model analytes. From the experimental results, it was found that both resolution and selectivity of these cationic CDs were dependent on the following parameters: concentration of chiral selectors, pH of the running buffer, counteranions of the CDs, side chain length of the n-alkyl-imidazolium cation, temperature of the capillary column, and organic modifier used. The concentration of chiral selectors required for enantioseparation varied from 3 to 30 mM. The BGE pH played an important role in the resolution of Dns-amino acids. For acidic BGEs, chiral resolution increased with pH (4.0-6.0) and reached a local maximum at pH 6.0. However, better resolutions were obtained with basic phosphate buffer at pH 9.6. Methanol was found to be an effective organic modifier for the resolution of Dns-amino acids by CE.     

Characterization of cyclodextrin-modified infrared chemical sensors: Part I. Modeling the mechanisms of interaction

To explore the properties of cyclodextrins (CDs) as an optical sensing phase, the behavior of immobilized CD in interaction with analytes was studied in this work. CDs having different cavity sizes were immobilized onto the surface of infrared (IR) internal reflection-sensing element (IRE) to kinetically monitor the behavior of CD in interaction with analytes. Several aromatic compounds having various molecular sizes and functional groups were used to characterize the interaction mechanism. A two-layer modification method was proposed in this work, which utilized a thin hydrophobic film (polyvinyl benzyl chloride) to stick on the IRE and to covalently bond to the CDs through an ethylene diamine linker. The synthesized CD phases exhibited high stability in aqueous solution. To analyze the behavior during the formation of complexes between the guest molecules and the CD phases, we modeled the interaction behavior and treated the kinetic data with the theoretical equations developed in this work. The results indicate that the behavior of the interaction between guest molecules and CDs was explained by considering the formation of two types of complexes: adsorbed complexes and inclusion complexes. The formation of the inclusion complexes was relatively fast, the time required to reach equilibrium could be shorter than a few minutes. The adsorbed complexes were also observed, but their rate of formation was relatively slow; equilibrium could be reached at times greater than 60 min. Based on the signals observed under equilibrium conditions, the concentration of inclusion complexes was approximately three times than that of the adsorbed complexes.     

Single-isomer sulfated alpha-cyclodextrins for capillary electrophoresis: hexakis(2,3-di-O-methyl-6-O-sulfo)-alpha-cyclodextrin, synthesis, analytical characterization, and initial screening tests

The third, concluding member of the family of single-isomer, fully sulfated alpha-cyclodextrins, the sodium salt of hexakis(2,3-di-O-methyl-6-O-sulfo)-alpha-cyclodextrin (HxDMS), has been synthesized on the kilogram scale, completing the nine-member array of the single-isomer, 6-O-sulfo CDs now available. HxDMS was tested for the capillary electrophoretic (CE) resolution of the enantiomers of nonelectrolyte, weak acid and weak base analytes contained in our CD screening kit. HxDMS complexed differently with many of the analytes tested than either its larger-ring analogs, heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD (HDMS) and octakis(2,3-di-O-methyl-6-O-sulfo)-gamma-CD (ODMS) or its same-ring, but differently substituted analogs, hexakis(6-O-sulfo)-alpha-CD (HxS) and hexakis(2,3-di-O-acetyl-6-O-sulfo)-alpha-CD (HxDAS). For all analytes, the effective mobilities and separation selectivities as a function of the background electrolyte concentration of HxDMS followed the trends that were found for the other single-isomer, 6-O-sulfo CDs.     

A family of single‐isomer,dicationic cyclodextrin chiral selectors for capillary electrophoresis: Mono‐6A‐ammonium‐6C‐butylimidazolium‐β‐cyclodextrin chlorides

The first member of the single‐isomer, dicationic cyclodextrin (CD) family, 6^A‐ammonium‐6^C‐butylimidazolium‐β‐cyclodextrin chlorides (AMBIMCD), has been synthesized, analytically characterized, and used to separate a variety of acidic enantiomers and amino acids by CE. Starting from mono‐6^A‐azido‐β‐cyclodextrin, the cationic imidazolium and ammonium moieties were subsequently introduced onto primary ring of β‐cyclodextrin via nucleophilic addition and Staudinger reaction. The analytically pure AC regio‐isomer CD was further obtained via column chromatography. This dicationic CD exhibited excellent enantioselectivities for selected analytes at concentration as low as 0.5 mM, which were even better than those of its mono‐imidazolium or ammonium‐substitued counterpart CDs at 10 equivalent concentrations. The effective mobilities of all studied analytes were found to decrease with the concentration of AMBIMCD. Inclusion complexation in combination with eletrostatic interactions seemed to account for the enhanced chiral discrimination process.     

Influence of methanol on the enantioresolution of antihistamines with carboxymethyl-beta-cyclodextrin in capillary electrophoresis

According to the model of Wren and Rowe, the separation between two enantiomers in capillary electrophoresis (CE) decreases if an organic modifier is added to the run buffer containing a neutral cyclodextrin (CD) in a concentration below its optimal value in a solvent-free system. In previous work, however, it was observed that the addition of methanol to the background electrolyte (BGE) containing not charged carboxymethyl-beta-CD in a concentration below its optimal value, increased the enantioresolution of dimetindene maleate. The enantioresolution decreased when other organic modifiers (ethanol, isopropanol or acetonitrile) were added and/or when other neutral (beta-CD, hydroxypropyl-beta-CD) or chargeable (carboxyethyl-beta- and succinyl-beta-CD) CDs were used. In this CE study further attempts are made to elucidate the observed phenomena through investigating other basic drugs. The effect of organic modifier and CD concentration on the enantioseparation was studied by means of central composite designs. It is shown that obtaining this increase in enantioresolution depends upon the type of CD, the type of organic modifier, and the structure of the analytes. It was also observed that small differences in the structure of the analytes or the CD could have an influence on the enantioresolution. The addition of methanol also resulted in different effects on the resolution of closely related analytes.     

Chiral separation in capillary electrophoresis using dual neutral cyclodextrins: theoretical models of electrophoretic mobility difference and separation selectivity

Simple equations and theoretical models, related to enantioselectivity (kappa) and C, have been developed for prediction of electrophoretic mobility difference (Deltamu) and separation selectivity (alpha) for enantiomers in CE using dual CDs, where alpha and kappa are defined as the ratio of mu and the ratio of binding constant (K) for enantiomers to each CD, respectively, C the CD concentration, and the average K for enantiomers and each CD. Experiments were carried out using dual CDs as beta-CD and dimethyl-beta-cyclodextrin (DM-beta-CD) and test analytes as five pairs of amphetamine drug enantiomers. A change in observed Deltamu and alpha of enantiomers in dual CDs was found to be in excellent agreement with the theoretical models. For example, in comparison with single CD1, dual CDs can enhance Deltamu and alpha up to the maximum value when enantiomers migrate with the same order in CD1 and CD2, and have the value of rho > 1.0, where rho is the enantioselectivity ratio for CD2 to CD1, while worse Deltamu and alpha are obtained for enantiomers with rho < 1.0.     

Monosubstituted positively charged cyclodextrins: Synthesis and applications in chiral separation

Several series of novel structurally well-defined positively charged CDs, applicable to alpha-, beta- and gamma-CDs for chiral separation using CE and chromatographic techniques have been developed. The chiral resolution capabilities of different series CDs towards amino acids and anionic analytes in CE are systematically investigated by considering all separation parameters including CD type, alkyl chain length of the cations attached to the CD rim, CD concentration, buffer pH, separation temperature and organic solvent. Typical results are demonstrated in the context. Examples of chiral separation with HPLC and supercritical fluid chromatography are first demonstrated by using coated chiral stationary phases (CSPs). Optimum CD loading content on the coated CSPs was explored in the chiral separation of neutral analytes.     

Modeling and optimization of the chiral selectivity of basic analytes in chiral capillary electrophoresis with negatively charged cyclodextrins using electrochemical detection

A mathematical model concerning the separation selectivity of basic analytes in chiral capillary electrophoresis (CE) modified with negatively charged cyclodextrins (CDs) has been presented to describe the dependence of chiral selectivity on the buffer pH and the chiral selector concentration. The electrophoretic method to determine the parameters of the model has also been developed. The model has been tested with racemic epinephrine and isoproterenol as target analytes and sulfonated beta-CD as chiral selector. The agreements have been found between the calculated and the measured values. Some significant conclusions to optimize chiral CE separation have been derived from the model and proven by the experiments. Electrochemical detection was used to meet the requirement of the low introduced concentration of analytes.     

Chiral HPLC Separation on Derivatized Cyclofructan Versus Cyclodextrin Stationary Phases

Cyclodextrins (CDs) and cyclofructans (CFs) are chiral cyclic oligosaccharides. While β-CD is composed of seven glucopyranose units forming rigid cavity, hydrophobic inside, CF6 and CF7, contain six and seven fructofuranose units, respectively, creating a polar crown ether core. These basic structures can be easily derivatized to form even more potential chiral selectors that enable enantioselective separation of various chiral compounds. Chiral stationary phases (CSPs) based on CFs and CDs that were derivatized with the same derivatization group, either dimethylphenyl or R-naphthylethyl, were compared. A set of analytes with different interaction possibilities was used for characterization of retention and enantioseparation abilities of these CSPs in normal separation mode of HPLC. The results showed that both cyclic oligosaccharide structure and derivatization group influenced the retention/separation behavior of analytes. Complementary enantioseparations were obtained for some analytes.     

Strong luminescence of Carbon Dots induced by acetone passivation: Efficient sensor for a rapid analysis of two different pollutants

The important photoluminescence enhancement found in Carbon Dots (CDs) obtained from carbonaceous nanomaterials when passivating with acetone is shown in this paper, in which this type of passivation has not been reported previously. Analytical fluorescent assays were performed with the selected CDs using two different pollutants as target analytes. The results show that the optimal conditions for detecting 2,4-dinitrophenol (DNP) were at pH 3.5 while in case of 2-amino-3,4,8-trimethyl-3H-imidazo[4,5-f]quinoxaline (4,8-DiMeIQx) were found at physiological pH. The fascinating ability of CDs to interact with certain molecules under certain conditions gave rise to explore some useful applications for a quick detection of contaminants by simply monitoring the photoluminescence of CDs as shown in this article.     

铝离子与羟基功能化荧光碳点的相互作用

研究了铝离子（Al3+）与表面带有大量羟基的荧光碳点之间的相互作用。 当Al3+的浓度在0.2~8 μmol/L时,碳点的荧光随其浓度的增大而逐渐被猝灭;继续增大Al3+的浓度,碳点的荧光逐渐恢复。 借助Zeta电位与动态光散射(DLS),初步探讨了二者的作用机理。 Al3+极易结合碳点表面的羟基,拉近碳点之间的距离引起碳点聚集,从而导致荧光猝灭;当碳点表面的羟基与Al3+完全配位后,碳点表面的负电荷转变为正电荷,由于静电排斥作用和空间效应,聚集的碳点重新分散,致使荧光恢复。 对比Cr3+和Fe3+与荧光碳点的作用,发现它们对荧光碳点只有较强的猝灭作用,在高浓度时却未出现碳点荧光恢复的现象,这归因于Al3+易形成两性氢氧化物。     

Chiral separation of amino acid esters by micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC) was used for the chiral separation of uncharged analytes (C- and N-protected amino acids). Sodium dodecyl sulfate (SDS) was the micelle forming agent, and different cyclodextrin (CD) derivatives were added as chiral selectors. Suitable conditions for the enantioseparation were found by variation of the separation conditions. The influence of addition of organic solvents like acetonitrile or methanol, and other chiral additives (camphor-10-sulfonic acid, malic acid) was examined. The addition of an organic modifier resulted in different effects on micelle formation, and thereby on the separation. The used chiral additives did not improve the selectivity. Furthermore, dependence of the electroosmotic flow (EOF), and the capacity factors on the concentration of CDs was investigated. Increasing the CD concentration, both the EOF to a smaller extent as well as the capacity factors decrease. Nevertheless, the enantioseparation is improved with a CD-concentration up to 30 mM. Higher CD-concentrations reduce the separation of the analytes.     

Tuning the cavity of cyclodextrins: altered sugar adaptors in protein pores

Cyclodextrins (CDs) have been widely used in host-guest molecular recognition because of their chiral and hydrophobic cavities. For example, β-cyclodextrin (βCD) lodged as a molecular adaptor in protein pores such as α-hemolysin (αHL) is used for stochastic sensing. Here, we have tuned the cavity and overall size of βCD by replacing a single oxygen atom in its ring skeleton by a disulfide unit in two different configurations to both expand our ability to detect analytes and understand the interactions of βCD with protein pores. The three-dimensional structures of the two stereoisomeric CDs have been determined by the combined application of NMR spectroscopy and molecular simulation and show distorted conformations as compared to natural βCD. The interactions of these synthetic βCD analogues with mutant αHL protein pores and guest molecules were studied by single-channel electrical recording. The dissociation rate constants for both disulfide CDs from the mutant pores show ～1000-fold increase as compared to those of unaltered βCD, but are ～10-fold lower than the dissociation rate constants for βCD from wild-type αHL. Both of the skeleton-modified CDs show altered selectivity toward guest molecules. Our approach expands the breadth in sensitivity and diversity of sensing with protein pores and suggests structural parameters useful for CD design, particularly in the creation of asymmetric cavities.     

Synthesis of a single-isomer sulfated beta-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions and its use for the electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes. Part 2: Heptakis(2-O-methyl-6-O-sulfo) cyclomaltoheptaose

The sodium salt of heptakis(2-O-methyl-6-O-sulfo)cyclomaltoheptaose (HMS), the second single-isomer, sulfated beta-CD carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 23 weak base analytes in acidic aqueous and methanolic BGEs. HMS interacted strongly with only about half of the analytes studied. The good separation selectivities and favorable normalized EOF mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 23 weak base analytes in the aqueous BGEs, often with separation selectivity values complimentary to those obtained with other single-isomer sulfated CDs. HMS did not prove to be as good a resolving agent in acidic methanolic BGEs as its counterpart, heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose.     

Separation of neutral and basic enantiomers by cyclodextrin electrokinetic chromatography using anionic cyclodextrin derivatives as chiral pseudo-stationary phases

Separations of neutral and basic racemates were performed using five different anionic cyclodextrin (CD) derivatives as chiral selectors, viz. carboxymethylated β-CD, β-CD phosphate sodium salt, sulfobutyl ether β-CD sodium salt, carboxymethylated γ-CD, and γ-CD phosphate sodium salt. For the separation of neutral racemates, an untreated fused silica capillary was employed and various neutral racemates were successfully separated. Since the pH of the buffer affected the electroosmotic flow (EOF), the resolution was improved by changing the buffer pH. A polyacrylamide coated capillary was employed for the separation of basic racemates to suppress EOF and to prevent adsorption of cationic analyte on the capillary surface. By choosing an appropriate type and concentration of anionic CD, about 40 basic racemates were successfully separated. Some rough binding constants of basic analytes with an anionic β-CD were measured to discuss the optimum concentration of the CD. The migration direction was dependent on the binding constants and the concentration of the CD. The analyte strongly bound to the anionic CD migrated towards the anode but the weakly bound one moved towards the cathode. Anionic γ-CDs were also very useful for the separation of basic enantiomers. Five neutral CDs were employed as chiral selectors to compare selectivity between charged and neutral CDs, and eleven racemates could only be resolved using anionic CDs. The separation of some basic racemates in human plasma was also described. The direct injection of plasma samples was possible for some enantiomers that did not interact strongly with plasma proteins.