Validation of a qualitative screening method for pesticides in fruits and vegetables by gas chromatography quadrupole-time of flight mass spectrometry with atmospheric pressure chemical ionization

A wide-scope screening method was developed for the detection of pesticides in fruit and vegetables. The method was based on gas chromatography coupled to a hybrid quadrupole time-of-flight mass spectrometer with an atmospheric pressure chemical ionization source (GC-(APCI)QTOF MS). A non-target acquisition was performed through two alternating scan events: one at low collision energy and another at a higher collision energy ramp (MS^E). In this way, both protonated molecule and/or molecular ion together with fragment ions were obtained in a single run. Validation was performed according to SANCO/12571/2013 by analysing 20 samples (10 different commodities in duplicate), fortified with a test set of 132 pesticides at 0.01, 0.05 and 0.20 mg kg⁻¹. For screening, the detection was based on one diagnostic ion (in most cases the protonated molecule). Overall, at the 0.01 mg kg⁻¹ level, 89% of the 2620 fortifications made were detected. The screening detection limit for individual pesticides was 0.01 mg kg⁻¹ for 77% of the pesticides investigated. The possibilities for identification according to the SANCO criteria, requiring two ions with a mass accuracy ≤±5 ppm and an ion-ratio deviation ≤±30%, were investigated. At the 0.01 mg kg⁻¹ level, identification was possible for 70% of the pesticides detected during screening. This increased to 87% and 93% at the 0.05 and 0.20 mg kg⁻¹ level, respectively. Insufficient sensitivity for the second ion was the main reason for the inability to identify detected pesticides, followed by deviations in mass accuracy and ion ratios.     

Homogeneous liquid-liquid extraction combined with gas chromatography-electron capture detector for the determination of three pesticide residues in soils

In this study, a new method was developed for analyzing malathion, cypermethrin and lambda-cyhalothrin from soil samples by using homogeneous liquid–liquid extraction (HLLE) and gas chromatography with electron capture detector (GC–ECD). Acetone was used as extraction solvent for the extraction of target pesticides from soil samples. When the extraction process was finished, the target analytes in the extraction solvent were rapidly transferred from the acetone extract to carbon tetrachloride, using HLLE. Under the optimum conditions, linearity was obtained in the range of 0.05–40 μg kg⁻¹ for malathion, 0.04–10 μg kg⁻¹ for lambda-cyhalothrin and 0.05–50 μg kg⁻¹ for cypermethrin, respectively. Coefficients of correlation (r²) ranged from 0.9993 to 0.9998. The repeatability was carried out by spiking soil samples at concentration levels of 2.5 μg kg⁻¹ for lambda-cyhalothrin, and 10 μg kg⁻¹ for malathion and cypermethrin, respectively. The relative standard deviations (RSDs) varied between 2.3 and 9.6% (n = 3). The limits of detection (LODs), based on signal-to-noise ratio (S/N) of 3, varied between 0.01 and 0.04 μg kg⁻¹. The relative recoveries of three pesticides from soil A1, A2 and A3 at spiking levels of 2.5, 5 and 10 μg kg⁻¹ were in the range of 82.20–91.60%, 88.90–110.5% and 77.10–98.50%, respectively. In conclusion, the proposed method can be successfully applied for the determination of target pesticide residues in real soil samples.     

Indirect determination of chloride and sulfate ions in alcohol fuel by capillary electrophoresis

A capillary zone electrophoresis method using indirect UV detection for the analysis of chloride and sulfate in alcohol fuel samples was developed. The anions were analyzed in less than 3 min using an electrolyte containing 10 mmol l^–1 chromate and 0.75 mmol l^–1 hexamethonium bromide (HMB) as electroosmotic flow modifier. Coefficients of variation were better than 0.6% for migration time (n=10) and between 2.05 and 2.82% for peak area repeatabilities. Analytical curves of peak area versus concentration in the range of 0.065–0.65 mg kg^–1 for chloride and 0.25–4.0 mg kg^–1 for sulfate were linear with coefficients of correlation higher than 0.9996. The limits of detection for sulfate and chloride were 0.033 and 0.041 mg kg^–1, respectively. Recovery values ranged from 85 to 103%. The method was successfully applied for the quantification of sulfate and chloride in five alcohol fuel samples. The concentration of sulfate varied from 0.45 to 3.12 mg kg^–1. Chloride concentrations were below the methods LOD.     

Rapid method for determination of phenylurea herbicides in milk

Summary A method has been developed for the determination of thirteen phenylurea herbicide residues in milk. It involves one-step solvent extraction of the milk with methanol by ultrasonication. The extract is cleaned up on an Amberchrom resin cartridge. Reversed-phase, gradient elution, high-performance liquid chromatography with UV detection at 242 nm is used to analyse the residues. The recovery of thirteen phenylurea pesticides is quantitative, ranging from 71.4% to 97.9% for the individual herbicides investigated at concentrations around 0.05 mg kg^–1 and from 65.1% to 95.6% around 0.005 mg kg^–1. The method is not associated with any of the emulsion problems common to conventional solvent extraction, which considerably reduce the sample clean-up process compared with existing methods.     

Survey of low-level endocrine disrupting pesticides in food matrices in Slovakia

The search on endocrine disrupting chemicals (EDCs) in non-fatty food was evaluated. A fast, high-throughput, accurate, multiresidue method for the analysis of selected EDC pesticides in fruit and vegetable food samples was developed. The QuEChERS technique was used for sample preparation. Fast GC-MS was performed with a narrow-bore capillary column and a quadrupole benchtop detector with electron ionization (EI) and negative chemical ionization (NCI). A part of the work was devoted to the comparison of NCI versus EI approach concerning the sensitivity of detection and to the study of selectivity enhancement in NCI mode. Matrix-matched standard solutions were utilized for calibration. The methods validation was performed. Fortification studies at 1, 5, 10 and 250?µg?kg^?1 for 35 pesticides in EI mode and 0.1, 1, 5 and 250?µg?kg^?1 for 28 pesticides in NCI mode were performed. Average recoveries for each fortification level ranged from 70 to 110% with >80% of recoveries between 90 and 110%. Limits of quantification (LOQs) were established at 5?µg?kg^?1 for EI and at 1?µg?kg^?1 for NCI mode, which is lower than the lowest maximum residue level (MRL) value set by the European Commission in fruit and vegetables. The developed and validated fast GC-MS method was successfully applied to the search of EDC pesticides at ultratrace concentration level in real fruit and vegetable samples in Slovakia. Thirty-four samples of 20 different commodities were analyzed. Seven samples contained residues of three or more EDCs pesticides.     

Use of High-Performance Liquid Chromatography–UV and Gas Chromatography–Mass Spectrometry for Determination of the Imidacloprid Content of Honeybees, Pollen, Paper Filters, Grass, and Flowers

Imidacloprid is a new insecticide with a wide range of action. Because honeybees are very sensitive to this substance, two techniques (HPLC–UV and GC–MS) which enable its detection in several matrices of both animal and vegetable origin were used to monitor its possible presence in cultivated land. In the first method quantification of imidacloprid in honeybees was achieved by use of the external standard method; the detection limit was 50 mg kg^–1, the linear range 0.05–1 mg mL^–1, recovery 60–83%, and the imprecision (coefficient of variation) 8.6% for repeatability and 11.8% for reproducibility. Recovery from pollen was 71–98% in the range 0.05–0.5 mg kg^–1. The repeatability was 9.2–13.9%. Imidacloprid can often be found in the environment, not as a simple molecule but as a group of degradation products. The GC–MS method could be used to quantify all these species as oxidation products and to determine the initial quantity of imidacloprid by use of a conversion factor. The liquid chromatographic analysis could be used to detect, in a standard solution, 10 ng mL^–1 derivatized 6-chloronicotinic acid. The linearity was good (R=0.999) over a wide concentration range (10 g mL^–1–10 ng mL^–1). Several samples with different matrices (filter paper placed on an pneumatic corn seed drill, grass, flowers, honeybees, etc.) obtained during the sowing period for imidacloprid-treated corn were analyzed. The quantification limit (LOQ) was 0.005 mg kg^–1 for grass and flowers, 0.002 mg kg^–1 for honeybees, and 0.024 mg kg^–1 for paper filters.     

Rapid pesticide analysis,in post-harvest plants used as animal feed,by low-pressure gas chromatography–tandem mass spectrometry

A wide range of pesticides used to control pests in vegetables have been determined in agricultural plant waste from beans, watermelons, and melons grown in greenhouses located in a predominantly agricultural area in Southeast Spain (Almería). Analysis of the pesticides was carried out by low-pressure gas chromatography (LP-GC) with mass spectrometry in tandem (MS–MS) mode, after extraction of the lyophilized samples with dichloromethane. The influence of the sample matrix on the analysis was avoided by use of matrix-matched standards. Linearity, detection limit (LOD), quantitation limit (LOQ), recovery, and precision for each pesticide were calculated. The most frequently encountered pesticides were endosulfan (>73% of the analyzed samples) and buprofezin (>55% of the samples), followed by cypermethrin, pirimifos-methyl, bifentrin, and chlorpyrifos (>30% of the samples). The pesticide found at the highest concentration level was endosulfan (223.33 mg kg^–1) in a watermelon sample.     

Determination of 77 Multiclass Pesticides and Their Metabolitesin Capsicum and Tomato Using GC-MS/MS and LC-MS/MS

A quick, sensitive, and reproducible analytical method for the determination of 77 multiclass pesticides and their metabolites in Capsicum and tomato by gas and liquid chromatography tandem mass spectrometry was standardized and validated. The limit of detection of 0.19 to 10.91 and limit of quantification of 0.63 to 36.34 µg·kg⁻¹ for Capsicum and 0.10 to 9.55 µg·kg⁻¹ (LOD) and 0.35 to 33.43 µg·kg⁻¹ (LOQ) for tomato. The method involves extraction of sample with acetonitrile, purification by dispersive solid phase extraction using primary secondary amine and graphitized carbon black. The recoveries of all pesticides were in the range of 75 to 110% with a relative standard deviation of less than 20%. Similarly, the method precision was evaluated interms of repeatability (RSDr) and reproducibility (RSD_wR) by spiking of mixed pesticides standards at 100 µg·kg⁻¹ recorded anRSD of less than 20%. The matrix effect was acceptable and no significant variation was observed in both the matrices except for few pesticides. The estimated measurement uncertainty found acceptable for all the pesticides. This method found suitable for analysis of vegetable samples drawn from market and farm gates.     

New methods for acceleration of meat sample preparation prior to determination of the metal content by atomic absorption spectrometry

Focused microwave-assisted digestion and ultrasound leaching have been applied for the extraction of Pb, Cd, Cr, Cu, Fe, Zn, Ca, and Mg from raw meat. Semimembranous muscle (SM) of raw pig ham was used for optimizing both the digestion and extraction steps by multivariate approaches. The detection and quantification limits were 0.5 and 0.9 g kg^–1 for Pb, 0.06 and 0.1 g kg^–1 for Cd, 0.2 and 1.2 g kg^–1 for Cr, 0.4 and 3 g kg^–1 for Cu, 0.04 and 0.1 mg kg^–1 for Fe, 0.012 and 0.017 mg kg^–1 for Zn, 0.3 and 0.4 mg kg^–1 for Ca, and 0.01 and 0.03 mg kg^–1 for Mg. The precision, expressed as relative standard deviation (RSD), ranged between 2.5 and 9.6% for focused microwave-assisted digestion and between 3.5 and 10.6% for ultrasound leaching. The methods were then compared with a reference method and applied to a certified reference material (bovine muscle 184, from the BCR). The t-test, applied to the results obtained from focused microwave-assisted digestion, revealed that they are in agreement (p>0.01) with the certified and estimated values in the case of Pb, Cd, Cr, Cu, Fe, Ca, Mg, and Zn but not in that of Fe. In the case of ultrasound leaching, only the extraction of Pb, Cu, and Ca was quantitative. The method based on microwave digestion provides more accurate and precise results than ultrasound leaching. These new procedures have many advantages with regards to conventional methods, namely, reduction of the extraction time, simplification of the process, avoidance of chemical emissions to the atmosphere, and no losses of metals by volatilization.     

Experimental design-based development and single laboratory validation of a capillary zone electrophoresis method for the determination of the artificial sweetener sucralose in food matrices

A capillary zone electrophoresis (CZE) method, optimised chemometrically, underwent a complete in-house validation protocol for the qualification and quantification of sucralose in various foodstuffs. Separation from matrix components was obtained in a dinitrobenzoic acid (3 mM)/sodium hydroxide (20 mM) background electrolyte with a pH of 12.1, a potential of 0.11 kV cm^–1 and a temperature of 22 °C. Detection was achieved at 238 nm by indirect UV. Screening, optimisation and robustness testing were all carried out with the aid of experimental design. Using standard addition calibration, the CZE method has been applied to still, carbonated and alcoholic beverages, yoghurts and hard-boiled candy. The method allows the detection of sucralose at >30 mg kg^–1, with a linearity range of 50–500 mg kg^–1, making it suitable for implementation of the recently amended Sweeteners for use in foodstuffs Directive (European Parliament and Council (2003) Off J L237:3–12), which set maximum usable doses of sucralose for many foodstuffs, most ranging from 200 mg kg^–1 to 450 mg kg^–1.     

HPLC determination of pesticides in green bean samples after SPE clean-up

Summary A reversed-phase high performance liquid chromatographic (HPLC) method with an acetonitrile-methanol-water mobile phase gradient and photodiode-array detection (DAD) is described for simultaneous determination of 21 pesticides, frequently used in agriculture, of different types, namely organophosphorus, organochlorine,N-methylcarbamates, triazines and phenylureas in vegetable samples. The pesticides were extracted with acetone and then partitioned from the vegetable sample with dichloromethane. Sample clean-up was accomplished by solid-phase extraction (SPE) using both C₁₈ and florisil SPE columns. Average recoveries from green beans ranged from 70.0 to 110.1%. Detection limits of less than 0.1 mg kg^–1 were obtained.     

Determination of pesticides and PCBs in honey by solid-phase extraction cleanup followed by gas chromatography with electron-capture and nitrogen–phosphorus detection

A multiresidue method for determination of 15 organochlorine pesticides (OCPs), six polychlorinated biphenyls (PCBs), and seven organophosphorus pesticides (OPPs) is implemented for routine determinations of residues in honey. The method involves solid-phase extraction cleanup and determination by GC–ECD/NPD. Quantitation limits ranged from 0.1 to 0.6 g kg^–1 honey for OCPs and PCBs, and from 5.0 to 25.0 g kg^–1 honey for OPPs. Recoveries of OCPs ranged between 77.4 and 94.0%; for PCBs they were from 63.8 to 73.5%. Recovery assays for OPPs varied from 66.7 to 98.1%. The method was applied to the analysis of 111 honey samples from Aragón, Spain. The results obtained indicated a low level of contamination by pesticide residues and PCBs, which can contribute to ensuring the consumer has a safe wholesome supply of honey.     

Simple and Rapid Determination of Benzoylphenylurea Pesticides in River Water and Vegetables by LC–ESI-MS

Liquid chromatography with electrospray mass spectrometry (LC–ESI-MS) instrumentation equipped with a single quadrupole mass filter has been used to determine several benzoylphenylurea insecticides (diflubenzuron, triflumuron, hexaflumuron, lufenuron and flufenoxuron). Chromatographic and MS parameters were optimised to obtain the best sensitivity and selectivity for all pesticides. Solid-phase extraction (SPE) using C₁₈ cartridges was applied for preconcentration of pesticide trace levels in river water samples. Recoveries of benzoylphenylurea pesticides from spiked river water (0.01 and 0.025 μg L⁻¹) were between 73 and 110% and detection limits were between 3.5 and 7.5 ng L⁻¹. The applicability of the method to the determination of benzoylphenylurea insecticides in spiked cucumber, green beans, tomatoes and aubergines was evaluated. Samples were extracted into dichloromethane without any clean-up step. The limits of detection ranged from 1.0 to 3.2 ng mL⁻¹ (0.68 and 2.13 μg kg⁻¹ in the vegetable samples). Mean recoveries ranged from 79 to 114% at spiking levels of 0.01 and 0.03 mg kg⁻¹. The method was applied to determine traces of benzoylphenylureas in both river water and vegetable samples with precision values lower than 10%. Interferences due to the matrix effect were overcome using matrix-matched standards.     

Application of pentafluorophenyl hydrazine derivatives to the analysis of nabumetone and testosterone in human plasma by liquid chromatography–atmospheric pressure chemical ionization–tandem mass spectrometry

Two carbonyl compounds, nabumetone and testosterone, were derivatized with pentafluorophenyl hydrazine (PFPH) and analyzed by atmospheric-pressure chemical-ionization mass spectrometry. The PFPH derivatives underwent dissociative electron capture in negative-ion APCI (ECAPCI) and gave intense [M–20]^– ions in the mass spectra. In positive-ion APCI, the PFPH derivatives underwent efficient protonation and gave intense [M+H]⁺ ions in the mass spectra. In CID, the major product ions of the [M–20]^– ions in ECAPCI corresponded to the partial moiety of PFPH. In contrast, the major product ions of [M+H]⁺ corresponded to the partial moiety of the analyte. By using selected reaction monitoring (SRM) detection, low pg of nabumetone (1 pg) and testosterone (7 pg) could be detected in both ECAPCI and positive-ion APCI. In comparison with the detection limits (SRM) of the underivatized analytes, use of the PFPH derivatives resulted in 2500-fold and 35-fold sensitivity enhancements for nabumetone and testosterone, respectively. The PFPH derivatives were applied to the analysis of nabumetone and testosterone in human plasma by both ECAPCI and positive-ion APCI and were found to enable detection of 0.1 ng mL^–1 nabumetone in spiked plasma. For testosterone, endogenous testosterone in female plasma was detected in both ECAPCI and positive-ion APCI.     

Determination of226Ra and uranium in fish samples from waters of the Grand Canyon by alpha spectroscopy without electrodeposition

A previous paper reported the application of a method for determining²²⁶Ra by -spectroscopy. This paper presents important improvements which permit the determination of²²⁶Ra in the presence of large amounts of Ca. The method was applied to the analysis of²²⁶Ra and U isotopes in fish samples from the waters of the Grand Canyon.²²⁶Ra ranged from 0.05 Bq kg^–1 /1.4 pCi kg^–1/ to 0.17 Bq k^–1 /4.7 pCi kg^–1/.²³⁸U values ranged from 0.13 Bq kg^–1 /3.5 pCi kg^–1/ to 0.52 Bq kg^–1 /14 pCi kg^–1/ and²³⁴U values were between 0.23 Bq kg^–1 /6.2 pCi kg^–1/ and 12 Bq kg^–1/ /326. pCi kg^–1/.     

Determination of carbendazim,thiabendazole, and<Emphasis Type="Italic"> o-</Emphasis>phenylphenol residues in lemons by HPLC following sample clean-up by ion-pairing

An efficient analytical method is presented involving effective sample clean-up with solid-phase extraction and HPLC-UV analysis for the simultaneous determination of carbendazim, thiabendazole, and o-phenylphenol residues in lemons. Sample preparation involves extraction with acetonitrile acidified with trifluoroacetic acid and an ethyl acetate/petroleum ether mixture. Purification of the crude extract was carried out with liquid–liquid partitioning after addition of an aqueous ammonia solution. Final clean-up was performed on polymeric reversed-phase cartridges pretreated with sodium dodecyl sulfate. Chromatographic analysis was performed on a reversed-phase HPLC column isocratically eluted with an acetonitrile/water/ammonia mixture and UV detection at 254 nm. The chromatographic method is repeatable, reproducible, and sensitive. Fungicide recoveries from lemon samples fortified at levels of 5 and 1 mg kg^–1 were 81–85% for carbendazim, 96–98% for thiabendazole, and 81–106% for o-phenylphenol with coefficients of variation of 2.5–7.4%. Detection limits for carbendazim, thiabendazole, and o-phenylphenol in lemons were 0.21, 0.27, and 0.51 mg kg^–1, respectively.     

Determination of fifteen priority phenolic compounds in environmental samples from Andalusia (Spain) by liquid chromatography–mass spectrometry

This work describes the optimisation of a method to determinate fifteen phenolic compounds in waters, sediments and biota (green marine algae) by liquid chromatography coupled to mass spectrometry (LC-MS) with atmospheric pressure chemical ionisation (APCI) in the negative mode. The LC separations of the studied compounds and their MS parameters were optimised in order to improve selectivity and sensitivity. Separation was carried out with a C₁₈ column using methanol and 0.005% acid acetic as mobile phase in gradient mode. The molecular ion was selected for the quantitation in selective ion monitoring (SIM) mode. A solid-phase extraction (SPE) method was applied in order to preconcentrate the target analytes from water samples. However, extraction of the compounds from sediment and biota samples was carried out by liquid–solid extraction with methanol/water after studying the influence of other organic solvents. In addition, a clean-up step by SPE with HLB Oasis cartridges was necessary for sediments and biota. The proposed analytical methodology was validated in the target environmental matrices by the analysis of spiked blank matrix samples. Detection limits were 10–50 ng L^–1 for water, 1–5 g kg^–1 for sediments and 2.5–5 g kg^–1 for biota samples. Good recoveries and precision values were obtained for all matrices. This methodology has been successfully applied to the analysis of incurred water, sediment and biota samples from Andalusia (Spain).     

Certification of mono-, di-, and tributyltin compounds in marine sediment certified reference material by species-specific isotope dilution mass spectrometric analysis using synthesized <Superscript>118</Superscript>Sn-labeled butyltins

A new marine sediment reference material (NMIJ CRM 7301-a) for butyltins analysis was prepared and certified by the National Metrological Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). The original material of the sediment was collected at a bay near industrial activities in Japan. The sediment material was air-dried, sieved, homogenized, and packaged into 1,000 glass bottles (60 g each). Certification of NMIJ CRM 7301-a was carried out at NMIJ using two different types of species-specific isotope dilution mass spectrometry: isotope dilution–ethylation–gas chromatography/inductively coupled plasma mass spectrometry (GC/ICPMS) and isotope dilution–ethylation–gas chromatography/mass spectrometry (GC/MS). A mixture of ¹¹⁸Sn-enriched monobutyltin, dibutyltin, and tributyltin was synthesized in our laboratory and was used as a spike for both techniques. Certified values are given for tributyltin (0.044±0.004 mg kg^–1 as Sn), dibutyltin (0.056±0.006 mg kg^–1 as Sn, and monobutyltin (0.058±0.013 mg kg^–1 as Sn), being at lower levels than currently available sediment CRMs for the analysis of organotins.     

Determination of131I,134Cs,137Cs in plants and cheese after Chernobyl accident in Roumania

Various samples from the south-east region of Roumania/greens, fodder, cheese/were analyzed for¹³¹I,¹³⁴Cs and¹³⁷Cs concentrations in May and July 1986 by -ray spectrometry. The concentrations are reported in nCi. kg^–1 wet weight. For greens, a considerable decrease was observed for¹³¹I/to 3.0–7.0 nCi. kg^–1/,¹³⁴Cs/to 0.5–2.0 nCi.kg^–1/ and¹³⁷Cs /to 1.0–4.0 nCi. kg^–1/ from the first half /5–15 May/ till the end of May 1986. For cheese, maximum values were measured between 5 and 15 May /sheep cottage cheese: 500–800 nCi.kg^–1 for¹³¹I, 25–50 nCi. kg^–1 for¹³⁴Cs, 40–80 nCi. kg^–1 for¹³⁷Cs/; at the beginning of July a considerable decrease /to 5–10 nCi. kg^–1 for¹³¹I, 1.2–2.0 nCi.kg^–1 for¹³⁴Cs, 2.2–3.0 nCi. kg^–1 for¹³⁷Cs/ was observed. In autumn 1986 a small increase up to 2.0–3.0 nCi. kg^–1 for¹³⁴Cs and 3.4–5.0 nCi. kg^–1 for¹³⁷Cs /in November/ was reported. The population's internal possible contamination was strongly limited by the authorities' severe control of the food-stuff.     

Determination of organophosphorus pesticide residues in fruits by gas chromatography with ITD and NPD detection

Summary Several widely used organophosphorus insecticides, diazinon, methyl-parathion, fenitrothion, malathion, fenthion and methidathion were selected for inclusion in this work. A comparative study of the multiresidue determination of these compounds in citrus fruit and grapes has been carried out by gas chromatography with nitrogen-phosphorus and ion trap detection. Samples were spiked with 0.1, 0.5 and 1 mg kg^–1 of each pesticide and blended in a Sorvall homogeniser with ethyl acetate. Column clean-up on Florisil was necessary for citrus peel extracts. The average recoveries varied from 81 to 107% with a relative standard deviation between 0.3 and 9.5% for GC-ITD and from 86 to 104% with a relative standard deviation ranging from 1.4 to 8.0% for GC-NPD. The detection limit of the method was 10 ng g^–1 or less for each organophosphorus insecticide, with both detectors. This method was applied to the analysis of treated lemons and 0.25 mg kg^–1 of fenitrothion in fruit was detected a week after treatment and identified by its mass spectrum. The results obtained showed that the proposed methods are reproducible and sensitive enough for the simultaneous determination of these insecticides in fruits at residue level.