Copolymer Microstructure by High-Resolution NMR Studies

The monomer and configurational sequences of several radical copolymers between substituted styrenes and acrylates have been examined by analyzing the high-resolution NMR spectra with the previously reported treatment of the styrene-methyl methacrylate system. The analyses have led to the conclusion that the monomer sequence distribution is just as expected from the usual copolymerization theory with r ₁ and r ₂.     

Polymerization of α-methyleneindane: A cyclic analog of α-methylstyrene

α-Methyleniedane (MI), a cyclic analog of α-methylstyrene which does not undergo radical homopolymerization under standard conditions, was synthesized and subjected to radical, cationic, and anionic polymerizations. MI undergoes radical polymerization with α,α′-azobis(isobutyronitrile) in contrast to α-methylstyrene, owing to its reduced steric hindrance, though the polymerization is slow even in bulk. Cationic and anionic polymerization of MI with BF₃OEt₂ and n-butyllithium, respectively, proceed rapidly. The thermal degradation behavior of the polymer depends on the polymerization conditions. The anionic and radical polymers are heteortactic-rich. Reactivity ratios in bulk radical copolymerization on MI (M₂) with methacrylate (MMA, M₁) were determined at 60°C (r₁ = 0.129 and r₂ = 1.07). In order to clarify the copolymerization mechanism, radical copolymerization of MI with MMA was investigated in bulk at temperatures ranging from 50 to 80°C. The Mayo–Lewis equation has been found to be inadequate to describe the result due to depolymerization of MI sequences above 70°C.     

Studies of the polymerization of diallyl compounds. XXVII. Copolymerization of diallyl tartrate with several vinyl monomers

The radical copolymerization of diallyl tartrate (DATa) (M₁) with diallyl succinate (DASu), diallyl phthalate (DAP), allyl benzoate (ABz), vinyl acetate (VAc), or styrene (St) was investigated in order to disclose in more detail the characteristic hydroxyl group's effect observed in the homopolymerization of DATa. In the copolymerization with DASu or DAP as a typical diallyldicarboxylate, the dependence of the rate of copolymerization on monomer composition was different for different copolymerization systems and unusual values larger than unity for the product of monomer reactivity ratios, r₁r₂, were obtained. In the copolymerization with ABz or VAc (M₂), the r₁ and r₂ values were estimated to be 1.50 and 0.64 for the DATa/ABz system and 0.76 and 2.34 for the DATa/VAc system, respectively; the product r₁r₂ for the latter copolymerization system was found again to be larger than unity. In the copolymerization with St, the largest effect due to DATa monomer of high polarity was observed. Solvent effects were tentatively examined to improve the copolymerizability of DATa. These results are discussed in terms of hydrogen-bonding ability of DATa.     

Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006     

Improving the Structural Control of Graft Copolymers. Copolymerization of Poly(dimethylsiloxane) Macromonomer with Methyl Methacrylate Using RAFT Polymerization

Reversible addition‐fragmentation chain transfer was applied to the copolymerization of methyl methacrylate and a methacrylate‐terminated poly‐(dimethylsiloxane) macromonomer (PDMS‐MA). The relative reactivity of PDMS‐MA (1/r_MMA) was higher than in the conventional radical copolymerization and similar to that in the atom transfer radical copolymerization. The obtained graft copolymers had much lower polydispersities than those obtained in the conventional radical systems.     

Polymerization and copolymerization of 2-phthalimidomethyl 1,3-butadiene. I. Preliminary studies of free radical polymerization and polymerizations initiated by various transition metal allyl complexes

2-Phthalimidomethyl 1,3-butadiene was homopolymerized and copolymerized with butadiene by free radical initiators; r₁ and r₂ were close to 1. All the attempts to polymerize 2PMB anionically have been unsuccessful. Preliminary studies of various η³-allylic catalysts showed that η³-allyl M₀(CO)₃OOCCF₃ initiates the polymerization of butadiene and is not sensitive to N-methyl phthalimide (NMP); neither does it initiate the copolymerization of butadiene and 2PMB. On the other hand, a catalyst that results from the reaction of allyl trifluoroacetate with nickel tetracarbonyl is efficient for the copolymerization of butadiene and 2PMB. η³-Allyl nickel trifluoroacetate was prepared in heptane or benzene and used in benzene or methylene chloride. In all cases it initiated the copolymerization of butadiene with 2PMB     

Copolymerization of allyl esters of some fatty acids

Attempts have been made unsuccessfully to homopolymerize a number of allyl esters of substituted fatty acids by radical initiation in emulsion systems. Copolymerizations of these allyl esters with styrene, methyl methacrylate, and vinyl chloride have been investigated. Of these comonomers, styrene and methyl methacrylate do not copolymerize well with the allyl esters, whereas vinyl chloride does. Reactivity ratios for the radical copolymerization of allyl 11-iodoundecanoate, M₁, and vinyl chloride, M₂, determined at 60°C. in benzene, are r₁ = 0.42 and r₂ = 1.64. A copolymer of allyl 10, 11-dibromoundecanoate and vinyl chloride was fractionated and found to be fairly homogeneous.     

Functional monomers and polymers. XXXXVI. A copolymerization study of methacryloyl-type monomers containing nucleic acid bases in chloroform solution

Behavior of the free radical copolymerization of N-β-methacryloyloxyethyl derivatives of adenine with that of thymine was studied in chloroform solution, taking account of the specific base-base interaction of these monomers. Hydrogen bonding interaction between such monomers was observed by NMR spectroscopy. The acceleration of copolymerization was found to be greater either at lower monomer concentration or at lower polymerization temperature. When N-β-methacryloyloxyethylcarbazole was used as a comonomer, the rate of copolymerization showed a similar trend as in the case of usual free radical copolymerizations. From r₁ and r₂ values obtained, the copolymerization was found to be alternating, particularly in the case of copolymerization between monomers having complementary nucleic acid bases. The results suggest that the hydrogen bonding interaction between adenine and thymine plays a role in the propagation step.     

Copolymerizations of tetraethyl vinylidene phosphonate. Bisphosphonate units in the main polymer chain. II

This is the second part of the article with a subtitle “… The First Synthesis” published by us previously. For this, second part, we have chosen copolymers with low proportion of (‐b‐) units, as well as random copolymers with substantial proportions of (‐b‐) units. This is in contrast to the part I, in which we mostly described alternating copolymerization. In this article, radical copolymerization of tetraethyl vinylidene phosphonate (B) with several vinyl/ethylenic monomers (M₂), namely acrylamide, methacrylamide, methyl methacrylate, n‐butyl acrylate, n‐butyl methacrylate, and styrene has been described and reactivity ratios of monomers as well as the average length of the comonomer blocks (n) have been determined (r₁ = 0). It has been found, that (as it should be) there is a proportionality between r₂ (=k_m2M2/k_m2B) and n. Moreover, there is a proportionality between r₂ (or n) and the comonomer (M₂) “reactivity,” defined as the rate constant of M₂ addition to the styrene radical. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1614–1621     

Effect of the substituents on radical copolymerization of dialkyl fumarates with some vinyl monomers

Radical copolymerization of dialkyl fumarates (DRF) with various vinyl monomers was carried out in benzene at 60°C. The monomer reactivity ratios, r₁ and r₂, were determined from the comonomer-copolymer composition curves. The relative reactivity of DRFs with various ester substituents toward a polystyryl radical was revealed to depend on both steric and polar effects of the ester groups. It has also been clarified that α-substituents of the polymer radical have a significant role in addition of DRF, from the comparison of the monomer reactivity ratios determined in copolymerizations with monosubstituted and 1,1-disubstituted ethylenes. The absolute cross-propagation rate constants were also evaluated and discussed. © 1992 John Wiley & Sons, Inc.     

Transformation of copolymerization mechanism of N-phenyl maleimide and ethyl phenylacrylate in the mixture of dioxane and pyridine

The copolymerization of N-phenylmaleimide (NPMI) with ethyl phenylacrylate (EPA) in a mixture of dioxane (DIO) and pyridine (Py) was investigated. The apparent monomer reactivity ratio r₁ (NPMI) = 0.07 ± 0.01 and r₂ (EPA) = 0.09 ± 0.02 in DIO was turned to r₁ (NPMI) = 3.67 ± 0.07 and r₂ (EPA) = 0 ± 0.03 in Py. The copolymerization of NPMI and EPA with the fixed feed ratio (mol/mol 1 : 1) in different volume ratio of DIO/Py showed that the copolymer composition might be varied in a wide range from the 93.5% of NPMI contents in copolymer to 48.7%. When the volume fraction of Py in the mixture of DIO and Py was <10%, the copolymer with nice alternating structure was obtained and the copolymerization could be inhibited completely by hydroquinone; if the fraction of Py was >10%, the following two kinds of copolymers were formed: a copolymer in which the content of NPMI increased with the Py and the copolymerization also could be inhibited by hydroquinone and a copolymer with low molecular weight almost completely composed of homopolymer of NPMI and is not affected by radical inhibitor as hydroquinone. The transformation of the copolymerization mechanism from the radical to anionic, which was dependent on the volume ratio of DIO and Py, was suggested. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2755–2761, 1999     

Copolymerization and Copolymers of 2,4,5-Tribromostyrene with Styrene and Acrylonitrile

Abstract

2,4,5-Tribromostyrene (TBSt) was copolymerized with styrene (St) or acrylonitrile (AN) in toluene solution using 2,2′-azobisisobutyronitrile as free radical initiator. The copolymerization reactivity ratios were found to be for the system TBSt/St r ₁ = 1.035 ± 0.164 (TBSt) and r ₂ = 0.150 ± 0.057 (St), and for the system TBSt/AN r ₁ = 2.445 ± 0.270 (TBSt) and r ₂ = 0.133 ± 0.054 (AN). The e and Q values were also calculated. The initial copolymerization rate, R _p, for both systems linearly increases as the content of TBSt in the monomer mixture increases. However, these values are somewhat higher when AN was used as a comonomer. A similar behavior has also been established for the course of the copolymerization reactions to high conversion. The resulting copolymers and TBSt-homopolymer show similar thermal stabilities of polystyrene. However, the glass transition temperature increases markedly with increasing TBSt content.     

Studies of the polymerization of diallyl compounds. XIX. Further discussion of the cyclocopolymerizations of diallyl phthalate with monovinyl monomers by the use of the model compounds

In the cyclocopolymerizations of diallyl phthalate (DAP) with monovinyl monomers the reactivity ratio of the cyclized radical, r_c, was smaller than that of the uncyclized radical, r₁; this was ascribed to steric hindrance in the addition reaction of the cyclized radical with DAP. In this paper, the validity of the values of r_c and r₁ is discussed on the basis of model experiments, i.e., the copolymerization of DAP in dilute solution corresponding to r_c and that of allyl propyl phthalate, to r₁. The copolymerizations of methyl allyl phthalate and allyl octyl phthalate with vinyl acetate are also presented.     

Applicability of the Mayo–Lewis equation to high conversion copolymerization of styrene and methylmethacrylate

In contradiction to reports from this and other laboratories, this study reports that the integrated Mayo–Lewis equation, or Meyer–Lowery equation, adequately describes the high-conversion free radical copolymerization of styrene and methylmethacrylate. The copolymerization was monitored by following the changes in the feed composition using NMR, as well as determination of the resulting copolymer compositions by NMR and UV. “Error in all Variables” statistical techniques were used to produce estimates of the reactivity ratios. The reactivity ratios estimated were, from feed composition, NMR, r₁ (styrene) = 0.472, r₂ = 0.454, from copolymer composition, UV, r₁ = 0.497, r₂ = 0.464, and NMR, r₁ = 0.432, r₂ = 0.422.     

Copolymerization of trifluoropropene with itaconic acid and ethylvinylether by using gamma rays

Copolymerization of trifluoropropene (TFP) with itaconic acid (IA) and ethylvinylether (EVE) have been carried out by using gamma rays from a ⁶⁰Co source. Copolymers of TFP-IA and TFP-EVE were white powder and white grease, respectively. The copolymerization rate of TFP-IA system is proportional to 0.64 power of dose rate and that of TFP-EVE system is proportional to 1.0 power of dose rate. The apparent activation energy for TFP-IA system is 4.3 kcal/mol and it is 10 kcal/mol for TFP-EVE system. The copolymerizations of both TFP-IA and TFP-EVE are inhibited remarkably by a radical scavenger, PBQ. The reactivity ratios for those systems were determined roughly to be r_TFP = 0.55, r_IA = 13 and r_TFP = 0.30, r_EVE = 0.20.     

Copolymerization reactivity of poly(methyl methacrylate) macromer

Poly(methyl mehtacrylate)(PMMA) macromers with several vinyl groups at both chain ends were synthesized by the mechanical scission reaction of the main chain in the presence of p-divinylbenzene(p-DVB). The radical copolymerization of this macromer with styrene(St) or MMA was carried out in benzene at 60°C and the reactivity ratio of both monomers (r₂) was calculated from a kinetic scheme of copolymerization. As a result, the effect of molecular weight and concentration of macromers was not observed in both copolymerization systems. The value of r₂, however, decreased as the number of end vinyl groups in a macromer (N) increased. These results are discussed in some detail as we describe the construction of the kinetic model of copolymerization.     

Radical reactivity of α-trifluoromethylstyrene

α-Trifluoromethylstyrene (TFMST) does not undergo radical homopolymerization with azobis(isobutyronitrile) (AIBN) in bulk at 60°C. Low-temperature initiation was not effective either. Radical copolymerization of TFMST (M₂) with styrene (ST, M₁) has yielded monomer reactivity ratios as follows: r₁ = 0.60 and r₂ = 0.00. It has been found that the cyclohexyl radical generated by reaction of cyclohexylmercuric chloride with sodium borohydride adds to the β-carbon of TFMST 7.5 times faster than that of ST. Combination of the copolymerization analysis and the “mercury method” has allowed us to estimate Alfrey–Price Q and e parameters for TFMST to be 0.43 and 0.90, respectively. Thus, due to the strongly electron-withdrawing effect of the trifluoromethyl group, this styrene is highly electron deficient. In spite of the favorable electronic effect, however, the ceiling temperature appears very low, presumably due to the steric hindrance.     

On the copolymerization model and microstructure of methyl acrylate - styrene radical copolymer. Influence of ZnCl2

Bulk radical copolymerization of methyl acrylate (MeA, M₁) with styrene (St, M₂) in presence and absence of ZnCl₂ as complexing agent was studied. ¹H-NMR spectra were used to establish copolymer composition and sequence distribution. The methoxy group signal was observed to be split due to pentads, but the analysis of sequence distribution is possible only at triad level. Both composition and sequence distribution data confirmed that bulk radical copolymerization respects quite well the terminal addition model; the values of r₁ = 0.14 ± 0.02 (from composition data) and r₁ = 0.25 ± 0.03 (from sequence distribution data) and r₂ = 0.83 ± 0.10 (from composition data) were found. The presence of ZnCl₂ increases the probability of alternating addition, e.g., for [ZnCl₂]/[MeA] = 0.2, r₁ = 0.03 ± 0.02 and r₂ = 0.17 ± 0.03. The radical copolymer obtained in bulk in the absence of ZnCl₂ presents a coisotactic configuration with σ = 0.75 ± 0.03, but the presence of the complexing agent reduces the probability of coisotactic addition, e.g., for [ZnCl₂]/[MeA] = 0.2, σ = 0.52 ± 0.03.     

The kinetics of radical copolymerization of acrylonitrile and methylacrylate with tricaprylylmethylammonium chloride as a phase-transfer catalyst

The phase-transfer radical copolymerization of acrylonitrile (AN) and methylacrylate (MA) with tricaprylylmethylammonium chloride was investigated in Na₂S₂O₈ aqueous-organic two-phase system at 25°C and under nitrogen atmosphere. The rate of copolymerization was expressed as the combined terms of quaternary ammonium ion and peroxydisulfate ion in the aqueous phase rather than the fed concentrations of catalyst and Na₂S₂O₈. The observed initial rate of copolymerization was used to analyze the copolymerization mechanism with a cyclic phase-transfer initiation step in the heterogeneous liquid–liquid system. The monomer reactivity ratio r₁ and r₂ obtained from the analysis of copolymerization mechanism were 1.584 and 0.856, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3504–3512, 1999