Reactions of bis(tetrazole)phenylenes. Surprising formation of vinyl compounds from alkyl halides

The reactions of 1,2-bis(tetrazol-5-yl)benzene (1), 1,3-bis(tetrazol-5-yl)benzene (2), 1,4-bis(tetrazol-5-yl)benzene (3), 1,2-(Bu₃SnN₄C)₂C₆H₄ (4), 1,3-(Bu₃SnN₄C)₂C₆H₄ (5) and 1,4-(Bu₃SnN₄C)₂C₆H₄ (6) with 1,2-dibromoethane were carried out by two different methods in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazoles. This lead to the formation of several alkyl halide derivatives, substituted at either N1 or N2 on the tetrazole ring, as well as the surprising formation of several vinyl derivatives. The crystal structures of both 1,2-[(2-vinyl)tetrazol-5-yl)]benzene (1-N,2-N′) (1b) and 1,3-bis[(2-bromoethyl)tetrazol-5-yl]benzene (2-N,2-N′) (5d) are discussed.     

Adamantane-retropeptides, new building blocks for molecular channels

Novel adamantane-oxalamide derivatives, N,N′-bis(1-adamantylglycine methyl ester)oxalamide (meso-1 and rac-1), N,N′-bis(3-aminoadamantane-1-carboxylic acid methyl ester)oxalamide (2) and N,N′-bis(3-aminoadamantane-1-carboxylic acid)oxalamide (3) were prepared and structurally characterized by spectroscopic methods and X-ray analysis. Crystal packing of the structures meso-1 and rac-1 is defined by one-dimensional α-networks of hydrogen-bonded chains. The crystal structures of 2 and 3 are characterized by two-dimensional β-networks of hydrogen bonds. The oxalamide 3 crystallizes as the solvates only. In the crystal structure of 3 the protic solvent participates in hydrogen bonding with the oxalamide moieties. However, in non-protic solvents 3 crystallizes as a solvate but the solvent does not participate in hydrogen bonding. The two-dimensional network of hydrogen bonds connecting molecules of 3 generates channels, which are filled by discrete solvent molecules.     

Mg-promoted reductive coupling of aromatic carbonyl compounds with trimethylsilyl chloride and bis(chlorodimethylsilyl) compounds

Mg-promoted reductive coupling of aromatic carbonyl compounds (1) with chlorosilanes, such as trimethylsilyl chloride (TMSCl:2), 1,2-bis(chlorodimethylsilyl)ethane (3) and 1,5-dichlorohexamethyltrisiloxane (4), in N,N-dimethylformamide (DMF) at room temperature brought about selective and facile reductive formation of both of carbon-silicon and oxygen-silicon bonds to give the corresponding α-trimethylsilylalkyl trimethylsilyl ethers (5) and cyclic siloxanes (6), (7) in moderate to good yields, respectively. The present facile and selective coupling may be initiated through electron transfer from Mg metal to aromatic carbonyl compounds (1).     

Synthesis, crystal structure and antibacterial activity of a group of mononuclear manganese(II) Schiff base complexes

Five mononuclear complexes of manganese(II) of a group of the general formula, [MnL(NCS)₂] where the Schiff base L = N,N′-bis[(pyridin-2-yl)ethylidene]ethane-1,2-diamine (L¹), (1); N,N′-bis[(pyridin-2-yl)benzylidene]ethane-1,2-diamine (L²), (2); N,N′-bis[(pyridin-2-yl)methylidene]propane-1,2-diamine (L³), (3); N,N′-bis[(pyridin-2-yl)ethylidene]propane-1,2-diamine (L⁴), (4) and N,N′-bis[(pyridin-2-yl)benzylidene]propane-1,2-diamine (L⁵), (5) have been prepared. The syntheses have been achieved by reacting manganese chloride with the corresponding tetradentate Schiff bases in presence of thiocyanate in the molar ratio of 1:1:2. The complexes have been characterized by IR spectroscopy, elemental analysis and other physicochemical studies, including crystal structure determination of 1, 2 and 4. Structural studies reveal that the complexes 1, 2 and 4 adopt highly distorted octahedral geometry. The antibacterial activity of all the complexes and their respective Schiff bases has been tested against Gram(+) and Gram(−) bacteria.     

2D and 3D supramolecular assemblies of double cyclopalladated azobenzenes realized by C-H?Cl-Pd, π?π and C-H?π interactions

The double cyclopalladated complex with azobenzene, μ-[(E)-1,2-diphenyldiazene-C^2,8, N^1,2]-di-[chloro(dimethylsulfoxide)palladium(II)]; (DMSO)PdCl(μ-C₆H₄NNC₆H₄)(DMSO)PdCl (1) and its analogous complex with DMF as ancillary ligand, (DMF)PdCl(μ-C₆H₄NNC₆H₄)(DMF)PdCl; μ-[(E)-1,2-diphenyldiazene-C^2,8,N^1,2]-di-[chloro(dimethylformamide)palladium(II)] (2a) were synthesized and the function of cyclopalladated moiety in molecular assembling in the solid state is illustrated by their crystal packings. The polymorphism of 2a and 2b is discussed. The crystal structures reveal assemblies with molecular components self-organized by C-H?Cl-Pd hydrogen bonds, π?π, and C-H?π interactions. The double cyclopalladated complexes of azobenzene, with two Pd-Cl moieties participating in the hydrogen bond formation and π-conjugated system involved in the π?π or C-H?π interactions, represent a new class of building blocks for construction of solid state supramolecular assemblies.     

Syntheses and optoelectronic properties of four photochromic dithienylethenes

Four photochromic dithienylethene compounds, 1,2-bis(2-methyl-5-naphthalene-3-thienyl)perfluorocyclopentene 1a, 1,2-bis[2-methyl-5(p-fluorophenyl)-3-thienyl]perfluorocyclopentene 2a, 1,2-bis[2-methyl-5(p-ethoxyphenyl)-3-thienyl]perfluorocyclopentene 3a, and 1,2-bis[2-methyl-5(p-N,N-dimethylaminophenyl)-3-thienyl]perfluorocyclopentene 4a were synthesized, and their optoelectronic properties, such as photochromism in solution as well as in poly-methylmethacrylate (PMMA) amorphous films, fluorescences and electrochemical properties were investigated in detail. These dithienylethenes have shown good photochromic behavior both in solution and in PMMA amorphous film. All of them exhibited relatively strong fluorescence and gave a bathochromic shift upon increasing concentration in THF. The irreversible anodic oxidation of 1a, 2a and 4a was observed by performing cyclic voltammetry experiments.     

Novel titanocene anti-cancer drugs derived from fulvenes and titanium dichloride

Starting from 6-(p−N,N-dimethylanilinyl)fulvene (1a) or 6-(pentamethylphenyl)fulvene (1b) [1,2-di(cyclopentadienyl)-1,2-di(p−N,N-dimethylaminophenyl)ethanediyl] titanium dichloride (2a) and [1,2-di(cyclopentadienyl)-1,2-bis(pentamethylphenyl)ethanediyl] titanium dichloride (2b) and their corresponding dithiocyanato complexes (3a, 3b) were synthesized. Titanocene 2b did not show a cytotoxic effect, but when 2a was tested against pig kidney carcinoma cells (LLC-PK) or human ovarian carcinoma cells (A2780/cp70) inhibitory concentrations (IC₅₀) of 2.7 × 10⁻⁴ and 1.9 ×  10⁻⁴ M, respectively, were observed.     

Synthesis and characterization of new air stable primary amido substituted diborane(4) derivatives

Three new diborane(4) derivatives, 1,2-bis(2,4,6-trimethylanilide)-1,2-bis(dimethyamido)diborane(4) (1), 1,2-bis(2,4,6-trimethylanilide)-1,2-bis(duryl)diborane(4) (2) and 1,2-bis(anilide)-1,2-bis(duryl)diborane(4) (3), have been synthesized and characterized by means of elemental analysis, IR, ¹H, ¹³C and ¹¹B NMR spectroscopy. Additionally, the structures of compounds 1 and 2 have been determined by the single crystal X-ray diffraction technique. The compounds 1 and 2 crystallize in the monoclinic P21/c space group. All of the compounds were found to be air stable.     

One-pot synthesis of macrocyclic compounds possessing two cyclobutane rings by sequential inter- and intramolecular [2+2] photocycloaddition reactions

Sensitized photocycloaddition reactions of 6,6′-dimethyl-4,4′-[1,3-bis(methylenoxy)phenylene]-di-2-pyrone (1) with electron-poor α,ω-diolefins such as ethylene diacrylate (2a) and polyoxyethylene dimethacrylates (2b-d) afforded site- and stereoselective macrocyclic dioxatetralactones (3a-d) and (4b) having 18- to 25-membered rings across the C5-C6 and C5′-C6′ double bonds, or C5-C6 and C3′-C4′ double bonds in 1, respectively. Similar photoreactions of 1 with electron-rich α,ω-diolefins such as poly(ethylene glycol)divinyl ether (2e and 2f) afforded crown ether-type macrocyclic compounds (5e and 5f) having 18- and 21-membered rings across the C3-C4 and C3′-C4′ double bonds in 1, respectively. The stereochemical features of 3b, 5e-xx, and 5e-nn were determined by the X-ray crystal analysis. The reaction mechanism was inferred by MO methods.     

Molecular recognition of biotin, barbital and tolbutamide with new synthetic receptors

We have measured, by means of NMR titrations, the binding constants for the complexes between hosts N,N′-bis(6-methylpyridin-2-yl)-1,3-benzenedicarboxamide (7) and 4-chloro-N,N′-bis(6-methylpyridin-2-yl)-2,6-pyridinedicarboxamide (8, hydrated) with biotin methyl ester (1), N,N′-dimethylurea (2), 2-imidazolidone (3), N,N′-trimethylenurea (4), barbital (5) and tolbutamide (6) as guests. Molecular Mechanics calculations (Monte Carlo Conformational Search, AMBER and OPLS force fields, MacroModel v.8.1) on the complexes formed between the foregoing guests and hosts 7 and 8, comparatively with 4-oxo-N,N′-bis(6-methylpyridin-2-yl)-1,4-dihydro-2,6-pyridinedicarboxamide (9a) have been carried out in order to determine the correlation between experimental and theoretical results and to understand the behaviour of the designed new hosts. Finally we have performed single point DFT [B3LYP/6-31G(d,p)] calculations on the optimised Molecular Mechanics geometries for the complexes between hosts 7-9 and water.     

Synthesis, structure, and catalytic activity of titanium complexes with new chiral 11,12-diamino-9,10-dihydro-9,10-ethanoanthracene-based ligands

A new series of organo-titanium complexes have been prepared from the reaction between Ti(NMe₂)₄ and C₂-symmetric ligands, (R,R)-11,12-bis(pyrrol-2-ylmethyleneamino)-9,10-dihydro-9,10-ethanoanthracene (1H₂), and (R,R)-bis(diphenylthiophosphoramino)-9,10-dihydro-9,10-ethanoanthracene (2H₂), (R,R)-11,12-bis(mesitylenesulphonylamino)-9,10-dihydro-9,10-ethanoanthracene (3H₂) and (R,R)-bis(diphenylthiophosphoramino)-1,2-cyclohexane (4H₂). Treatment of Ti(NMe₂)₄ with 1 equiv of 1H₂ gives, after recrystallization from a benzene solution, the binuclear double helicate titanium amide (1)₂[Ti(NMe₂)₂]₂⋅(5) in 71% yield. While under similar reaction conditions, reaction of Ti(NMe₂)₄ with 1 equiv of 2H₂, 3H₂ or 4H₂ gives, after recrystallization from a toluene or benzene solution, the mononuclear single helicate titanium amides (2)Ti(NMe₂)₂ (6), (3)Ti(NMe₂)₂ (7) and (4)Ti(NMe₂)₂ (8), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 5-8 have further been confirmed by X-ray diffraction analyses. The titanium amides are active catalysts for the polymerization of rac-lactide, leading to the isotactic-rich polylactides.     

Nickel(II) and zinc(II) complexes of N-substituted di(2-picolyl)amine derivatives: Synthetic and structural studies

The interaction of di(2-picolyl)amine (1) and its secondary N-substituted derivatives, N-(4-pyridylmethyl)-di(2-picolyl)amine (2), N-(4-carboxymethyl-benzyl)-di(2-picolyl)amine (3), N-(4-carboxybenzyl)-di(2-picolyl)amine (4), N-(1-naphthylmethyl)-di(2-picolyl)amine (5), N-(9-anthracenylmethyl)-di(2-picolyl)amine (6), 1,4-bis[di(2-picolyl)aminomethyl]benzene (7), 1,3-bis[di(2-picolyl)aminomethyl]benzene (8) and 2,4,6-tris[di(2-picolyl)amino]triazine (9) with Ni(II) and/or Zn(II) nitrate has resulted in the isolation of [Ni(1)(NO₃)₂], [Ni(2)(NO₃)₂], [Ni(3)(NO₃)₂], [Ni(4)(NO₃)₂]·CH₃CN, [Ni(5)(NO₃)₂], [Ni(6)(NO₃)₂], [Ni₂(7)(NO₃)₄], [Ni₂(8)(NO₃)₄], [Ni₃(9)(NO₃)₆]·3H₂O, [Zn(3)(NO₃)₂]·0.5CH₃OH, [Zn(5)(NO₃)₂], [Zn(6)(NO₃)₂], [Zn(8)(NO₃)₂] and [Zn₂(9)(NO₃)₄]·0.5H₂O. X-ray structures of [Ni(4)(NO₃)₂]·CH₃CN, [Ni(6)(NO₃)₂] and [Zn(5)(NO₃)₂] have been obtained. Both nickel complexes exhibit related distorted octahedral coordination geometries in which 4 and 6 are tridentate and bound meridionally via their respective N₃-donor sets, with the remaining coordination positions in each complex occupied by a monodentate and a bidentate nitrato ligand. For [Ni(4)(NO₃)₂]·CH₃CN, intramolecular hydrogen bond interactions are present between the carboxylic OH group on one complex and the oxygen of a monodentate nitrate on an adjacent complex such that the complexes are linked in chains which are in turn crosslinked by intermolecular offset π-π stacking between pyridyl rings in adjacent chains. In the case of [Ni(6)(NO₃)₂], two weak CH?O hydrogen bonds are present between the axial methylene hydrogen atoms on one complex and the oxygen of a monodentate nitrate ligand on a second unit such that four hydrogen bonds link pairs of complexes; in addition, an extensive series of π-π stacking interactions link individual complex units throughout the crystal lattice. The X-ray structure of [Zn(5)(NO₃)₂] shows that the metal centre once again has a distorted six-coordinated geometry, with the N₃-donor set of N-(1-naphthylmethyl)-di(2-picolyl)amine (5) coordinating in a meridional fashion and the remaining coordination positions occupied by a monodentate and a bidentate nitrato ligand. The crystal lattice is stabilized by weak intermolecular interactions between oxygens on the bound nitrato ligands and aromatic CH hydrogens on adjacent complexes; intermolecular π-π stacking between aromatic rings is also present.     

Catalytic synthesis of vinylphosphanes via calcium-mediated intermolecular hydrophosphanylation of alkynes and butadiynes

The calcium complex [(thf)₄Ca(PPh₂)₂] (1) is a very effective catalyst for the hydrophosphanylation of substituted alkynes of the type R-CC-R (R = Me, Ph) yielding (E)-1,2-diphenyl-1-diphenylphosphanylethene (2a) and (Z)-1-phenyl-2-diphenylphosphanyl-1-propene (2b). The calcium-mediated hydrophosphanylation of butadiynes of the type R-CC-CC-R (R = Me, SiMe₃, Ph, Mes, tBu) proceeds less selectively and diverse products are obtained such as 1,4-substituted 1,4-bis(diphenylphosphanyl)-1,3-butadienes (3), 1,4-diphenyl-1,2-bis(diphenylphosphanyl)-1,3-butadiene (4), and 1,4-di(tert-butyl)-1,4-bis(diphenylphosphanyl)buta-1,2-diene (5). Besides these regioisomers also several configuration isomers with respect to the C=C double bonds [(E)/(Z) isomerism] are obtained. A catalytic cycle can be formulated with the first addition of a Ca-P bond of the catalyst 1 to a CC triple bond always leading to the formation of an intermediate with the newly formed C-P bond in 1-position whereas the remaining phosphanido calcium fragment binds to the carbon in 2-position. The addition of a second diphenylphosphane is much faster and therefore, only two-fold hydrophosphanylated butadiynes are observed. Neither addition products with only one HPPh₂ group nor those with more than two PPh₂ substituents are obtained.     

New N-heterocyclic carbene mercury(II) complexes: Close mercury-arene interaction

Mononuclear mercury complexes (1, 2, and 3) bearing bis-N-heterocyclic carbene (NHC) ligands of the form [(NHC)₂-μ-Hg]⁺² have been prepared and structurally characterised. The complexes were derived from three bis-imidazolium salts as precursors to NHC; either 1,3-bis(N-methylimidazolium-1-ylmethyl)benzene bis(hexafluorophosphate) (I·2PF₆), 1,3-bis(N-butylimidazolium-1-ylmethyl)benzene bis(hexafluorophosphate) (II·2PF₆) or 3,5-bis(N-butylimidazolium-1-ylmethyl)toluene bis(hexafluorophosphate) (III·2PF₆) treated with mercury(II) acetate. Interestingly X-ray crystal structure analysis revealed a close interaction between the Hg metal centre with one carbon atom of the aryl linker in addition to coordination with two NHCs.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

Synthesis and characterization of metal-free and metallophthalocyanines containing N2S2-type macrocyclic moieties linked ferrocenyl groups

The new metal-free (4) and metallophthalocyanines (5) carrying macrocyclic moieties linked ferrocenyl groups have been synthesized by direct cyclotetramerization of the pre-cursor, 12,13-dicyano-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrocyclobenzo[k]-4,7-diaza-1,10-dithiacyclododecine (3) which has been prepared by the macrocyclization reaction of 1,2-bis(2-iodoethylmercapto)-4,5-dicyanobenzene (1) with N,N′-ethylenebis-(ferroceneylmethyl)amine (2), in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a strong organic base. Nickel (II) phthalocyanine (5) was synthesized by the reaction of metal-free phthalocyanine with anhydrous NiCl₂ in dry quinoline. The target compound and its intermediates have been characterized by a combination of elemental analysis and ¹H, ¹³C NMR, IR, UV-Vis and MS spectral data.     

Reaction of azulene with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol in a mixed solvent of methanol and acetonitrile in the presence of hydrochloric acid: a facile one-pot synthesis and properties of new triarylethylenes possessing an azulen-1-yl group

Reaction of azulene (1) with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol (2) in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives 2-(azulen-1-yl)-1,1-bis[4-(dimethylamino)phenyl]ethylene (3) (8% yield), 1-(azulen-1-yl)-(E)-1,2-bis[4-(dimethylamino)phenyl]ethylene (4) (28% yield), and 1,3-bis{2,2-bis[4-(dimethylamino)phenyl]ethenyl}azulene (5) (9% yield). Besides the above products, this reaction affords 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethane (6) (15% yield), a meso form (1R,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethane (7) (6% yield), and the two enantiomeric forms (1R,2R)- and (1S,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethanes (8) (6% yield). Furthermore, addition reaction of 3 with 1 under the same reaction conditions as the above provides 6, in 46% yield, which upon oxidation with DDQ (=2,3-dichloro-5,6-dicyano-1,4-benzoquinone) in dichloromethane at 25 °C for 24 h yields 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethylene (9) in 48% yield. Interestingly, reaction of 1,1-bis[4-(dimethylamino)phenyl]-2-(3-guaiazulenyl)ethylene (11) with 1 in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives guaiazulene (10) and 3, owing to the replacement of a guaiazulen-3-yl group by an azulen-1-yl group, in 91 and 46% yields together with 5 (19% yield) and 6 (13% yield). Similarly, reactions of 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (12) and 1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}-2-(3-guaiazulenyl)ethylene (13) with 1 under the same reaction conditions as the above provide 10, 2-(azulen-1-yl)-1,1-bis(4-methoxyphenyl)ethylene (16), and 1,3-bis[2,2-bis(4-methoxyphenyl)ethenyl]azulene (17) (93, 34, and 19% yields) from 12 and 10 and 2-(azulen-1-yl)-1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}ethylene (18) (97 and 58% yields) from 13.     

Fluorinated molecules relevant to conducting polymer research

The synthesis of versatile fluorine compounds for conducting polymer research on fluorinated materials is presented. 1,2,4,5-Tetrafluorobenzene was converted to 1,2,4,5-tetrafluorobenzaldehyde (1) and protected as an acetal. This gave the acetals 1,2,4,5-tetrafluoro-3-(1,3-dioxol-2-yl)benzene (2a) and 1,2,4,5-tetrafluoro-3-(5,5-dimethyl-1,3-dioxan-2-yl)benzene (2b). Compounds 2a and 2b were converted into the semiprotected 2,3,5,6-tetrafluoroterephthaldehydes: 1,2,4,5-tetrafluoro-3-(1,3-dioxol-2-yl)-6-formylbenzene (3a) and 1,2,4,5-tetrafluoro-3-(5,5-dimethyl-1,3-dioxan-2-yl)-6-formylbenzene (3b). While 3a was easily deprotected to give 2,3,5,6-tetrafluoroterephthaldehyde (4) compound 3b proved very resilient to hydrolysis and gave a 1:1 mixture of 4 and 1,2,4,5-tetrafluoro-3,6-bis(5,5-dimethyl-1,3-dioxan-2-yl)benzene (5). Compound 4 was reduced to 1,2,4,5-tetrafluoro-3,6-dihydroxymethylbenzene (6) and converted into 1,2,4,5-tetrafluoro-3,6-dibromomethylbenzene (7). Compound 7 was finally converted into 1,2,4,5-tetrafluoro-3,6-bis(diethylphosponylmethyl)benzene (8). Compounds 4 and 8 are versatile fluorinated molecules that can be used to replace their hydrogen counterparts in many molecules and materials. To illustrate this compounds 4 and 8 were oligomerised to give partially fluorinated polyphenylenevinylene (9).     

Highly stereoselective synthesis of para-substituted (E)-N-styrylcarbazoles via sequential silylative coupling-Hiyama coupling reaction

A series of new para-substituted (E)-(N)-styrylcarbazoles, i.e., eight (E)-9-[2-(aryl)ethenyl]-9H-carbazoles (5-12) and 1,4-bis[(E)-2-(9H-carbazol-9-yl)vinyl]benzene (13), have been synthesized in high yield and stereoselectively by a sequential silylative coupling-Hiyama coupling reaction, i.e., coupling of commercially available 9-vinylcarbazole with vinyltriethoxysilane or divinyltetramethyldisiloxane in the presence of [RuHCl(CO)(PCy₃)₂] (I), followed by Pd (II) catalyzed cross-coupling with para-substituted iodobenzenes.The tandem procedure has facilitated the synthesis of 13. X-ray structures of the intermediate silylvinylcarbazole (4), as well as products 12 and 13 have been obtained.     

Reactions of azulenes with 1,2-diaryl-1,2-ethanediols in methanol in the presence of hydrochloric acid: comparative studies on products, crystal structures, and spectroscopic and electrochemical properties

Although reaction of guaiazulene (1a) with 1,2-diphenyl-1,2-ethanediol (2a) in methanol in the presence of hydrochloric acid at 60 °C for 3 h under aerobic conditions gives no product, reaction of 1a with 1,2-bis(4-methoxyphenyl)-1,2-ethanediol (2b) under the same reaction conditions as 2a gives a new ethylene derivative, 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (3), in 97% yield. Similarly, reaction of methyl azulene-1-carboxylate (1b) with 2b under the same reaction conditions as 1a gives no product; however, reactions of 1-chloroazulene (1c) and the parent azulene (1d) with 2b under the same reaction conditions as 1a give 2-[3-(1-chloroazulenyl)]-1,1-bis(4-methoxyphenyl)ethylene (4) (81% yield) and 2-azulenyl-1,1-bis(4-methoxyphenyl)ethylene (5) (15% yield), respectively. Along with the above reactions, reactions of 1a with 1,2-bis(4-hydroxyphenyl)-1,2-ethanediol (2c) and 1-[4-(dimethylamino)phenyl]-2-phenyl-1,2-ethanediol (2d) under the same reaction conditions as 2b give 2-(3-guaiazulenyl)-1,1-bis(4-hydroxyphenyl)ethylene (6) (73% yield) and (Z)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1-phenylethylene (7) (17% yield), respectively. Comparative studies of the above reaction products and their yields, crystal structures, spectroscopic and electrochemical properties are reported and, further, a plausible reaction pathway for the formation of the products 3-7 is described.