Microwave activated solvent-free cascade reactions yielding highly functionalised 1,3-thiazines

One-pot cascade reactions of N-acylglycines, acetic anhydride, anhydrous sodium acetate, aromatic aldehydes, and ammonium N-aryldithiocarbamates expeditiously and diastereoselectively yield 5-acylamino-3,6-diarylperhydro-2-thioxo-1,3-thiazin-4-ones (5a-j) in solvent-free conditions under microwave irradiation.     

Comparative studies for the effect of intercalating agent on the physical properties of epoxy resin-clay based nanocomposite materials

In this study, a series of comparative studies for the effect of intercalating agent on the physical properties of the epoxy resin-clay based nanocomposite materials were performed. First, the quaternary alkylphosphonium and alkylammonium salt were both used as the intercalating agents separately for the preparation of organophilic clay through the cationic exchange reactions with Na⁺-montmorillonite clay. Subsequently, the organophilic clay was blent into the epoxy resin through in-situ thermal ring-opening polymerizations to prepare a series of polymer-clay nanocomposite (PCN) materials. The as-synthesized PCN materials were subsequently characterized by Fourier-Transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (WXRD), and transmission electron microscopy (TEM).It should be noted that the quaternary alkylphosphonium salt (Φ₃P⁺-C₁₂)-modified clay was found to show better dispersion capability than that of quaternary alkylammonium salt (Me₃N⁺-C₁₆)-modified clay existed in the polymer matrix based on the studies of WXRD and TEM. The better dispersion of (Φ₃P⁺-C₁₂)-modified clay in epoxy resin was found to lead more effectively enhanced physical property such as corrosion protection, gas barrier, mechanical strength, thermal stability, and flame retardant properties of polymers than that of (Me₃N⁺-C₁₆)-modified clay, in the form of coating and membrane, based on the measurements of a series of electrochemical corrosion parameters, gas permeability analysis (GPA), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and limiting oxygen index (LOI), respectively. Effect of material composition on the physical properties of as-prepared materials was also investigated.     

Cis-homo addition-1,4 thiophile d'organomagnesiens avec des composes thiocarbonyles comportant un groupe carbonyle en β: Synthese stereoselective d'alcoylthio-2 et de bis (alcoylthio)-2,2 cyclopropanols

Aliphatic Grignard reagents react stereoselectively with β thioxo carbonyl compounds to give substituted cis 2-alkylthio or 2,2-bis (alkylthio) cyclopropanols with good yields. Two types of non-enethiolisable thiocarbonyl compounds of formulae MeCOC(Me)₂CSR undergo this reaction a thioketone (R = Me) and a number of dithioesters (R = SMe, SEt, S iso Pr). The cis configuration of cyclopropanols has been assigned by ¹H NMR-Eu(fod)₃. The cyclopropane ring closure is a concerted cis-1,4-homo addition.     

Thermal analyses of poly(N-isopropylacrylamide) in aqueous solutions and in nanocomposite gels

The coil-to-globule transition of poly(N-isopropylacrylamide) (PNIPA) prepared by free-radical redox polymerization in aqueous solutions and its nanocomposite (NC) gels were investigated by differential scanning calorimetery. The lower critical solution temperatures (LCST) of aqueous solutions of PNIPA of different molecular weights were not significantly affected by molecular weight (M _w: 0.19?×?10⁶?4.29?×?10⁶?g?×?mol^?1) or polymer concentration (1?10?wt%), although the enthalpy of transition increased with molecular weight, at M _w (<1.2?×?10⁶ g?×?mol^?1). The glass-transition temperature of PNIPA in the dried state also remained constant (138?°C), regardless of molecular weight. On the other hand, the enthalpy of the coil-to-globule transition of PNIPA in NC gels consisting of a PNIPA/clay network decreased with increasing clay concentration (C _clay), while the onset temperature (≡LCST) was almost constant, regardless of C _clay. The PNIPA chains in NC gels could be classified into the following three types: P-1, which exhibits a normal LCST transition, similar to that of linear PNIPA; P-2, exhibiting restricted transition at higher temperatures as a result of interactions with the clay; and P-3, which does not undergo that transition because of stronger restrictions. It was found that the proportion of P-3 increases with increasing C _clay. However, some P-1 and P-2 was still observed, even in NC gels with high C _clay. That the transition to the hydrophobic globular state was restricted by interactions with the clay was confirmed by measurements on PNIPA after removal of the clay from NC gels.     

Regioselective dehydrative intramolecular heteroannulation of β-allyl-β-hydroxy dithioesters: facile and straightforward entry to 2H-thiopyrans

β-Allyl-β-hydroxy dithioesters have been employed in the synthesis of hitherto unreported and synthetically demanding 2H-thiopyrans via regioselective intramolecular annulation strategy. Lewis acid BF₃·Et₂O efficiently mediates the regioselective dehydration followed by intramolecular thioannulation at room temperature. The attractive features of this protocol include mild conditions, high atom-economy and excellent yields with the elimination of water as the only by-product.     

Addition of thiol-ended polystyrene to acrylates

Polystyrene containing end thiol groups has been prepared via the aminolysis or alcoholysis of its trithioester under conditions established previously for the model reaction of bis(1-phenylethyl) trithiocarbonate. The aminolysis of polystyrene with M _n = 8.2 × 10³ by n-hexylamine at 100°C in toluene led to the formation of a polymer with M _n = 4 × 10³ and a polydispersity coefficient of 1.13. The unimodal molecular-mass distribution of the polymer and its narrow polydispersity that is nearly equal to the initial polydispersity suggest that all trithiocarbonate groups of the starting polystyrene are involved in hydrolysis. The addition of 1-phenylethylthiol and thiol-ended polystyrene to methyl acrylate and methyl methacrylate via the Michael hydrolysis has been studied, and it has been demonstrated that the addition proceeds quantitatively at room temperature. The addition may be directly implemented with the use of dithioesters in the presence of the catalytic amount of a base; therefore, the stage of thiol synthesis can be eliminated. For the quantitative addition to acrylates, the preliminary hydrolysis of the polymer is however preferable.     

Preparation of composites and nanocomposites based on bentonite and poly(sodium acrylate). Effect of amount of bentonite on the swelling behaviour

A series of composite and nanocomposite hydrogels were synthesized by copolymerization reaction of partially neutralized acrylic acid (SA) on bentonite micropowder (BT) using N,N′-methylenebisacrylamide (MBA) as a crosslinker and potassium persulfate (I) as an initiator in aqueous solution. The influences of Na⁺-BT, organoBT (O-BT), and the content of the BT in the copolymeric gels on the swelling behaviour in deionized water and saline solution (0.2 wt.% NaCl_(aq)) were investigated. Results showed that the equilibrium swelling (W_∞) was decreased by adding a small amount of the BT, however, at higher BT contents, the W_∞ increased with the increase of the amount of clay. It was found that a concentration of 14 wt.% Na⁺-BT gave the best results absorption (955 g/g). Moreover, the amount of swelling for these absorbents in saline solution was smaller than that in deionized water. These hydrogels were characterized by X-ray diffraction and scanning electron microscopy. Finally, the thermogravimetric analysis indicated that introduction of clay to the polymer network resulted in an increase in thermal stability.     

Syntheses of amides via iodine-catalyzed multiple sp~3 C–H bonds oxidation of methylarenes and sequential coupling with N,N-dialkylformamides

<正>~~     

Adsorption and photochemical behaviors of the novel cationic xanthene derivative on the clay surface

Novel tetra-cationic xanthene derivative (Flu) was synthesized. Its adsorption and photochemical behaviors on the clay surface were investigated. Fluorescence quantum yield (?_f) and fluorescence lifetime were 0.50 and 2.9 ns for Flu/clay complex. ?_f of Flu was enough high (>0.1) even at high density conditions (0.080 molecules nm⁻²). It is supposed that the strong interaction between clay and Flu by the ‘Size-Matching Effect’ realizes the highly emissive clay complexes at high density adsorption condition by a suppression of a molecular aggregation, which tends to decrease the photochemical activity.     

Sulfide oxygenation by tert-butyl hydroperoxide with mononuclear (Me3TACN)Mn catalysts

Mononuclear (Me₃TACN)MnX₃ compounds, where X is Cl⁻, Br⁻, or N₃⁻, and Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane, have been tested for catalyzing both sulfide oxygenation and styrene epoxidation by tert-butyl hydroperoxide (TBHP) and display turnover frequencies (TOF) up to 200 h⁻¹ at room temperature. Sulfoxides or sulfones may be produced selectively by varying reaction conditions. Product distribution from the oxygenation reactions of ethyl phenyl sulfide, 2-chloroethyl phenyl sulfide, and styrene is consistent with a mechanism involving an early single-electron transfer (SET) step.     

Analytical reactions of substituted cyanoferrates: 3. Spectrophotometric determination of azide ion in an aqueous medium

The pentacyanoamminoferrate(II) ion and N^?₃, in acidic condition produce a colored species absorbing at 555 nm that is useful in the spectrophotometric determination of the latter in an aqueous medium. The results show a linear response for N^?₃ in 0.42 to 4.2 ppm range under controlled experimental conditions. Many common anions including Cl^?, SO^2?₄, and NO^?₃ do not interfere, and color development attains maximum intensity in 30 min.     

Photochemistry of 1,3,5-trithianes in solution: Steady-state and laser flash photolysis studies

In this work, we characterized the direct photochemistry of a set of five structurally-related 1,3,5-trithianes. The compounds were 1,3,5-trithiane, the α- and β-isomers of the 2,4,6-trimethyl derivatives, and the α- and β-isomers of the 2,4,6-triphenyl derivatives. Under steady-state, 254-nm irradiation of acetonitrile solutions of all five trithianes, dithioesters of the form RC( = S)SCH(R)SCH₂R were identified and shown to be primary photoproducts (R = H, CH₃, or C₆H₅). Shorter dithioesters, RC( = S)SCH₂R, were also identified and shown to be secondary products. The presence of the dithioesters could be monitored by their strong absorption bands in the region of 310 nm. This same band was evident following the laser flash photolysis of the five trithianes. The laser-induced transient spectra showed another absorbing species (I) in all five trithianes. This species was not stable and showed a complementary decay that matched the growth of the stable photoproducts at 310 nm. This suggested that the intermediates (I) are the precursors of the corresponding dithioesters, RC( = S)SCH(R)SCH₂R. These correlated processes were related to monophotonic events. However, in the laser flash photolysis experiments in the triphenyl derivatives, there was an additional pathway for the formation of the dithioesters, and this was biphotonic. When the biphotonic formation of products was compensated for, RC( = S)SCH(R)SCH₂R formation quantum yields from steady-state and laser flash photolysis matched within experimental error. The absorption band of (I) varied systematically with substituents, 320 nm in 1,3,5-trithiane, 340 nm in the 2,4,6-trimethyl derivatives, and 420 nm in the 2,4,6-triphenyl derivatives. The nature of these intermediates (I) were discussed as resulting from CS bond cleavage, probably heterolytic.     

Cobalt complexes of a selenium diimide and a tellurium diimide dimer

[CoCl₂{N,N′-Te₂(N^tBu)₄}] (1) was obtained in good yields by the reaction of equimolar amounts of (^tBu)NTe(μ-N^tBu)₂TeN(^tBu) and CoCl₂ in toluene under an argon atmosphere. The crystal structure of 1·CH₂Cl₂ showed that the dimeric tellurium diimide ligand is N,N′-chelated to cobalt. The related reaction of Se(N^tBu)₂ and CoCl₂ affords a green product tentatively identified as a 1:1 adduct [CoCl₂{N,N′-Se(N^tBu)₂}] (CHN analysis). However, recrystallization from thf produces the ion-separated complex [Co₂(μ-Cl)₃{N,N′-Se(N^tBu)₂}₂(thf)₂][CoCl₃{NH₂(^tBu)}]·1½thf (2·1½thf), in which the monomeric selenium diimide ligand is N,N′-chelated to cobalt in the cation. A pathway for the formation of 2 from [CoCl₂{N,N′-Se(N^tBu)₂}] in thf is proposed.     

Synthesis of Rh(I) and Ir(I) complexes with chiral C2-multitopic ligands: Structural and catalytic properties

Four multitopic ligands, N,N′-bis[(S)-prolyl)phenylenediamine, N,N′-bis{[(S)-pyrrolidin-2-yl]methyl}phenylenediamine, N,N′-bis[(S)-N-benzylprolyl]phenylenediamine, N,N′-bis{[(S)-N-benzyl-pyrrolidin-2-yl]methyl}phenylenediamine, were synthesised and their co-ordination properties with Rh(I) and Ir(I) studied. The complexes were prepared by the reaction of [MCl(cod)]₂ with AgPF₆ and further treatment with the ligand. All ligands form one to one [ML] species with the above metal ions. The structures of these complexes were elucidated by analytical and spectroscopic data (elemental analysis, mass spectroscopy, IR, ¹H- and ¹³C-NMR). Complexes show excellent activities and enantioselectivities up to 30% for the hydrogenation of prochiral olefins under mild reaction conditions.     

Enantiomer separation of rac-2,2′-dihydroxy-1,1′-binaphthyl (BNO) by inclusion complexation with racemic or achiral ammonium salts and a novel transformation of a 1:1:1 racemic complex of BNO, Me4N·Cl and MeOH into a conglomerate complex in the solid state

The complete simultaneous and mutual enantiomer resolution of 2,2′-dihydroxy-1,1′-binaphthyl (BNO) and N-(3-chloro-2-hydroxypropyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH(OH)CH₂Cl·Cl⁻ into their enantiomers by inclusion complexation between their racemates in EtOH in the presence of a chiral seed crystal is reported. The enantiomer resolution of the rac-BNO was also accomplished easily by inclusion complexation with achiral ammonium salts, N-(2-hydroxyethyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH₂OH·Cl⁻ and tetramethylammonium chloride, Me₄N⁺·Cl⁻. Inclusion complexation of the rac-BNO with Me₃N⁺ CH₂CH₂OH·Cl⁻ gave only a 1:1 conglomerate inclusion complex but not a racemic complex. Recrystallization of the rac-BNO and an equimolar amount of Me₄N⁺·Cl⁻ from MeOH (7 ml) and MeOH (15 ml) gave a 1:1:1 racemic complex, BNO·Me₄N⁺·Cl⁻·MeOH and a 1:1 conglomerate complex, BNO·Me₄N⁺·Cl⁻, respectively. Novel transformation of the former racemate into the latter conglomerate occurred by heating or by exposure to MeOH vapor in the solid state.     

Novel chiral tetraaza ligands: synthesis and application in asymmetric transfer hydrogenation of ketones

Novel chiral tetraaza ligands, N¹,N²-bis(2-(piperidin-1-yl)benzylidene)cyclohexane-1,2-diamine 1 and N¹,N²-bis(2-(piperidin-1-yl)benzyl)cyclohexane-1,2-diamine 2, have been synthesized and fully characterized by analytical and spectroscopic methods. The structure of (R,R)-1 has been established by X-ray crystallography. Asymmetric transfer hydrogenation of aromatic ketones with the catalysts prepared in situ from [IrHCl₂(COD)]₂ and the chiral tetraaza ligands in 2-propanol gave the corresponding optically active secondary alcohols in high conversions and good ees (up to 91%) under mild reaction conditions.     

Effects of stereochemistry and β-substituents on the rates of vinylic SN2 reaction of hypervalent vinyl(phenyl)-λ-iodanes with tetrabutylammonium halides

Both stereoisomers of β-(2-phenylethoxy)vinyl-λ³-iodane and (Z)-β-aroyloxyvinyl-λ³-iodane were prepared stereoselectively. These substituted vinyl-λ³-iodanes undergo nucleophilic vinylic substitutions with n-Bu₄NX (X=Cl, Br, I) under mild conditions, yielding vinyl halides. The observed inversion of configuration at the ipso vinylic carbon atom is compatible with a concerted vinylic S_N2 mechanism. Kinetic measurements indicated that the rates for vinylic S_N2 reaction of (Z)-vinyl-λ³-iodane are greater than those of the E-isomer, probably because of the higher ground state energy of the Z-isomer. Electronic effects of β-substituents of vinyl-λ³-iodanes in the vinylic S_N2 reaction are also discussed.     

N-(Benzoyloxy)amines: an investigation of their thermal stability, synthesis, and incorporation into novel peptide constructs

A series of N-benzoyloxyamines were pyrolyzed and their decomposition temperatures correlated well with the amine architecture's ability to stabilize a N-centered radical. A variety of amine substrates were treated with a biphasic mixture of benzoyl peroxide (BPO), CH₂Cl₂ and an aqueous carbonate buffer (at pH 10.5). Primary and secondary amines were successfully N-benzoyloxylated in good yield. Tertiary amines and BPO gave low yields of the corresponding N-oxide and complex product mixtures, presumably via radical decomposition. Electron deficient amines (such as fluorinated aliphatic amines, α-aminoacids, α-aminoesters, and α-aminoamides) were not N-benzoyloxylated under these conditions. Instead, N-benzoylation was observed with the fluorinated amines and the reaction was sensitive to temperature and the pH of the aqueous medium. A one-pot-two-step synthesis of N^α-FMOC-l-Leu-N^β-(benzoyloxy)-β-alanine ethyl ester, a peptide containing both an α- and a novel β-amino acid framework, was also developed.     

Nucleophilic reactivities of Schiff base derivatives of amino acids

Treatment of α-imino esters derived from glycine esters and benzophenone or benzaldehydes with potassium tert butoxide in DMSO gave persistent solutions of carbanions at 20?°C. The kinetics of their reactions with quinone methides and benzylidene malonates (reference electrophiles) have been followed photometrically under pseudo-first order conditions. The reactions followed second-order rate laws. Since addition of 18-crown-6 ether did not affect the reaction rates, the measured rate constants correspond to the reactions of the non-paired carbanions. Plots of the second-order rate constants against the electrophilicity parameters E of the electrophiles are linear, which allowed us to derive the nucleophile-specific parameters N and s_N, according to the linear Gibbs energy relationship lg k₂(20?°C)?=?s_N(N + E). The Ph₂C?=?N- and PhCH?=?N- groups act as very weak electron acceptors with the consequence that Ph₂C?=?N-CH^–-CO₂R and PhCH?=?N-CH^–-CO₂R have a similar nucleophilicity as Ph-CH^–-CO₂Et, the anion of ethyl phenylacetate.     

Étude de la complexation des lanthanides trivalents par les six isomères de l'acide diaminocyclohexane-tétraacétique : Partie 3. Relation entre les Constantes d'Acidité et la Structure Moleculaire des Chélatants

(Study of the complexation of trivalent lanthanides by the six isomers of diaminocyclohexanetetraacetic acid. Part 3. Relationship between the acidity constants and the molecular structure of the ligands.)Potentiometric measurements of the acidity constants of the six isomers of diaminocyclohexane-N,N,N′,N′-tetraacetic acid (DCTA) are reported for an ionic strength of 1 mol l^?1 (KCl) at 25°C. The values of the two constants K_a3 and K_a4 are correlated with the maximum N—N distance for each ligand. Ethylenediamine-N,N,N′,N′-tetraacetic acid (EDTA) and some homologous ligands, including specially synthesized, 1,8-diaminooctane-N,N,N′,N′-tetraacetic acid and 1,10-diaminodecane-N,N,N′,N′-tetraacetic acid, are studied under the same conditions. It is proved that there is a relationship between the molecular structure and the affinity for protons.