Zn selective luminescent ‘off-on’ probes derived from diaryl oxadiazole and aza-15-crown-5

New photo-induced electron transfer (PET) probes OMOX and OBOX, carrying an additional binding site in the form of ‘oxadiazole nitrogen’ have been designed to evaluate binding interactions with biologically significant Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, and Zn²⁺ including environmentally toxic Ba²⁺ and Cd²⁺ using optical spectral techniques. While Li⁺, Na⁺, and K⁺ did not appreciably perturb either the absorption or emission spectra, Ba²⁺, Ca²⁺, Mg²⁺, Zn²⁺, and Cd²⁺ induced slight red shifts (2-8 nm) in the UV-visible spectra as well as pronounced chelation induced enhanced fluorescence (CHEF). Both OMOX and OBOX exhibited the highest CHEF in contact with the zinc ion, whereas Ba²⁺, Ca²⁺, Mg²⁺, and Cd²⁺ induced relatively less emission enhancements. OBOX, which is a poorer emitter (Φ_f=0.0062) than OMOX (Φ_f=0.015), showed highly promising 160-fold emission enhancement in the presence of Zn²⁺. Potential, therefore is available in OBOX to function as a selective luminescent ‘off-on’ sensor for Zn²⁺ in the presence of coordinatively competing Ba²⁺, Ca²⁺, Mg²⁺, and Cd²⁺ ions.     

Selective turn-on fluorescence for Zn and Zn + Cd metal ions by single Schiff base chemosensor

Chemosensor based on Schiff base molecules (1, 2) were synthesized and demonstrated the selective fluoro/colorimetric sensing of multiple metal ions (Mn²⁺, Zn²⁺ and Cd²⁺) in acetonitrile–aqueous solution. Both 1 and 2 showed a highly selective naked-eye detectable colorimetric change for Mn²⁺ ions at 10⁻⁷ M. Fluorescence sensing studies of 1 and 2 exhibited a strong fluorescence enhancement (36 fold) selectively upon addition of Zn²⁺ (10⁻⁷ M, λ_max = 488 nm). Fluorescence titration and single crystal X-ray analysis confirmed the formation of 1:1 molecular coordination complex between 1 and Zn²⁺. Interestingly, a rare phenomenon of strong second turn-on fluorescence (190 fold, λ_max = 466 nm) was observed by the addition of Cd²⁺ (10⁻⁷ M) into 1 + Zn²⁺ or Zn²⁺ (10⁻⁷ M) into 1 + Cd²⁺. Importantly both 1 and 2 exhibited different fluorescence λ_max with clearly distinguishable color for both Zn²⁺ and Cd²⁺.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

Spectroscopic,structure and DFT studies of copper(II) and palladium(II) complexes of pyridine-2-carboxaldehyde-2-pyridylhydrazone: A chromogenic agent for palladium(II)

A heterocyclic hydrazone ligand, pyridine-2-carboxaldehyde-2-pyridylhydrazone, HL, 1, was investigated as a new chromogenic agent for selective detection of Pd²⁺. The ligand HL, 1, undergoes 1:1 complexation with Pd²⁺ and Cu²⁺ to form complexes [Pd(L)Cl], 1a and [Cu(HL)Cl₂], 1b respectively. The complex 1a gives a characteristic absorption peak at 536 nm with distinct reddish-pink coloration. The change in color can easily be distinguished from other metal complexes by the naked eye. No obvious interference was observed in the presence of other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Pb²⁺). The association constants, K_ass (UV–Vis), were found to be 5.52 ± 0.004 × 10⁴ for 1a and 4.94 ± 0.006 × 10⁴ for 1b at 298 K. On excitation at 295 nm, the ligand HL, 1 strongly emits at 372 nm due to an intraligand ¹(π–π^∗) transition. Upon complexation the emission peaks are blue shifted (λ_ex 295 nm, λ_em 358 nm for 1a and λ_ex 295 nm, λ_em 367 nm for 1b) along with a quenching (F/F₀ 0.32 for 1a and 0.88 for 1b) in the emission intensity. DFT and TDDFT calculations were highly consistent with the spectroscopic behavior of the ligand and complexes. The molecular structure of the complex 1b has been determined by single crystal X-ray diffraction studies.     

A new intramolecular charge transfer receptor as a selective ratiometric ‘off-on’ sensor for Zn

A new intramolecular charge transfer (ICT) probe 3 is found to display a highly selective photophysical response in the presence of Zn²⁺, among various biologically significant metal ions examined. The absorption band of 3 is red shifted by 84 nm and the fluorescence intensity increases 13-fold in the presence of Zn²⁺. The binding interaction follows the order Zn²⁺ > Cd²⁺ > Mg²⁺ > Ba²⁺ > Ca²⁺ > K⁺ ≅ Na⁺ ≅ Li⁺ and the stability constant for 3 + Zn²⁺ is over an order of magnitude higher compared to biologically competing Ca²⁺ and Mg²⁺.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Naphthalimide-based fluorescent Zn chemosensors showing PET effect according to their linker length in water

We have developed naphthalimide-based fluorescent chemosensors that exhibit fluorescence enhancement upon binding Zn²⁺ ion in 10 mM HEPES buffer (pH 7.4) at 25 °C. The fluorescence enhancement was induced by a PET inhibition process in which electron transfer from the nitrogen lone pair electrons of the Dpa unit to naphthalimide was blocked upon the binding of the sensor to Zn²⁺. The longer the linker length (n = 1-3) of the sensor, the less the PET efficiency becomes. Among the sensors (1, 2, and 3) examined, 1 shows the highest selectivity and sensitivity for Zn²⁺ over other transition metal ions and alkali metal ions in water.     

Fluorescence properties of polyamines bearing two terminal quinoline fragments in water

Fluorescence properties of polyamines bearing two terminal quinoline fragments with different polyamine chain length, such as ethylenediamine (L0), diethylenetriamine (L1), and triethylenetetramine (L2), have been studied in water. These ligands show Zn²⁺-induced fluorescence enhancement, while showing almost no enhancement with other cations. However, stability constants for Zn²⁺ coordination and fluorescence response against Zn²⁺ depend strongly on the polyamine chain length. The chain length also affects the fluorescence wavelength. The Zn²⁺-L1 and Zn²⁺-L2 complexes show emission at 410 nm, while Zn²⁺-L0 complexes show a blue-shifted emission at 375 nm due to the partial charge transfer from the excited state quinoline to the Zn²⁺ center.     

A chemosensor showing discriminating fluorescent response for highly selective and nanomolar detection of Cu and Zn and its application in molecular logic gate

A fluorescent based receptor (4Z)-4-(4-diethylamino)-2-hydroxybenzylidene amino)-1,2dihydro-1,5-dimethyl-2-phenylpyrazol-3-one (receptor 3) was developed for the highly selective and sensitive detection of Cu²⁺ and Zn²⁺ in semi-aqueous system. The fluorescence of receptor 3 was enhanced and quenched, respectively, with the addition of Zn²⁺ and Cu²⁺ ions over other surveyed cations. The receptor formed host-guest complexes in 1:1 stoichiometry with the detection limit of 5 nM and 15 nM for Cu²⁺ and Zn²⁺ ions, respectively. Further, we have effectively utilized the two metal ions (Cu²⁺ and Zn²⁺) as chemical inputs for the manufacture of INHIBIT type logic gate at molecular level using the fluorescence responses of receptor 3 at 450 nm.     

Palladiumdichloride (ferrocenylethynyl)phosphanes and their use in Pd-catalyzed Heck-Mizoroki- and Suzuki-Miyaura carbon-carbon cross-coupling reactions

In this work the synthesis of phosphane selenides (FcCC)_nPh_3−nPSe (2a, n = 1; 2b, n = 2; 2c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₄)(η⁵-C₅H₅)Fe) from (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3) and selenium is described to estimate the σ-donor properties of these systems by ³¹P{¹H} NMR spectroscopy. Progressive replacement of phenyl by ferrocenylethynyl causes a shielding of the phosphorus atom with increasing of the ¹J(³¹P-⁷⁷Se) coupling constants.The palladiumdichloride metal-organic complexes [((FcCC)_nPh_3−nP)₂PdCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) have been used as (pre)catalysts in the Suzuki-Miyaura (reaction of 2-bromo-toluene (4a) and 4-bromo-acetophenone (4b), respectively, with phenyl boronic acid (5) to give 2-methyl biphenyl (6a) and 4-acetyl biphenyl (6b)) and in the Heck-Mizoroki reaction (treatment of iodobenzene (7) with tert-butyl acrylate (8) to give E-tert-butyl cinnamate (9)).The structures of molecules 1a, 1c, 2c, and 3c in the solid state were determined by single X-ray structure analysis showing that the structural parameters of these systems are unexceptional and correspond to those of related phosphanes, seleno phosphanes, and palladium dichloride complexes.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

A rapid Hg sensor based on aza-15-crown-5 ether functionalized 1,8-naphthalimide

A new 1,8-naphthalimide derivative bearing an aza-15-crown-5 macrocycle (1) has been synthesized as a chemosensor for Hg²⁺ by a two-step reaction. The sensor shows selectivity to Hg²⁺ over 11 other metal cations in aqueous media. Upon addition of Hg²⁺, the fluorescence emission of the sensor at 537 nm is significantly quenched along with 22 nm blue-shift that makes this compound a useful sensor for Hg²⁺ measurement.     

A novel series of iridium complexes with alkenylquinoline ligands: Theoretical study on electronic structure and spectroscopic property

The ground and the lowest-lying triplet excited state geometries, electronic structures, and spectroscopic properties of a novel series of neutral iridium(III) complexes with cyclometalated alkenylquinoline ligands [(C^N)₂Ir(acac)] (acac = acetoylacetonate; C^N = 2-[(E)-2-phenyl-1-ethenyl]pyridine (pep) 1; 2-[(E)-2-phenyl-1-ethenyl]quinoline (peq) 2; 1-[(E)-2-phenyl-1-ethenyl]isoquinoline (peiq) 3; 2-[(E)-1-propenyl]pyridine (pp) 4; 2-[(E)-1-fluoro-1-ethenyl]pyridine (fpp) 5) were investigated by DFT and CIS methods. The highest occupied molecular orbital is composed of d(Ir) and π(C^N) orbital, while the lowest unoccupied molecular orbital is dominantly localized on C^N ligand. Under the TD-DFT with PCM model level, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized ground and triplet excited state geometries, respectively. The calculated lowest-lying absorptions at 437 nm (1), 481 nm (2), 487 nm (3), 422 nm (4), and 389 nm (5) are attributed to a {[d_x²-y²(Ir) + d_xz(Ir) + π(C^N)] → [π∗(C^N)]} transition with metal-to-ligand/intra-ligand charge transfer (MLCT/ILCT) characters, and the calculated phosphorescence at 582 nm (1), 607 nm (2), 634 nm (3), 515 nm (4), and 491 nm (5) can be described as originating from the ³{[d_x²-y²(Ir) + d_xz(Ir) + π (C^N)] [π∗(C^N)]} excited state with the ³MLCT/³ILCT characters. The calculated results revealed that the phosphorescent color of these new Ir(III) complexes can be tuned by changing the π-conjugation effect strength of the C^N ligand.     

Study of the cyclen derivative 2-[1,4,7,10-tetraazacyclododecan-1-yl]-ethanethiol and its complexation behaviour towards d-transition metal ions

The compound 2-[1,4,7,10-tetraazacyclododecan-1-yl]-ethanethiol (L2) has been synthesized and characterized by multinuclear NMR spectroscopy and mass spectrometry. Its thiol-protected precursor L1 has also been isolated and characterized, including by X-ray structural analysis. The protonation constants of L2 were determined by potentiometric methods at 25.0 °C and 0.10 mol dm⁻³ KNO₃ ionic strength. ¹³C NMR studies and 2D NMR spectra recorded at different pD values have been used to analyse its protonation scheme. Stability constants of L2 with Cu²⁺, Zn²⁺ and Cd²⁺ were also determined by potentiometry, and the Zn(II) and Cu(II) complexes were studied in solution by NMR, UV–Vis, and EPR spectroscopies. The pM values (pH 7.4) calculated for the metal complexes of L2 are higher than the corresponding values found for cyclen and cyclam, but the selectivity of L2 for Cu²⁺ is low.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Thermodynamic and kinetic parameters associated with the fluxional behavior of 2-methyl- and 2,6-dimethyltroponeiron tricarbonyl complexes

The kinetic and thermodynamic parameters for regioisomerisation of 2-methyl- and 2,6-dimethyl-derivatives of tricarbonyl[η⁴-tropone]iron complexes have been studied by ¹H NMR spectrometry over a range of 40 °C. Regioisomerisation of these complexes proceeds by an intramolecular first-order process and results in the almost complete conversion of the less stable complexes (4, 8) to more stable regioisomers (1, 5). The activation energies and half lifes for the conversion (4 → 1) and (8 → 5) were found to be ΔG^#=92 kJ mol⁻¹; τ_1/2=12.8 h, and ΔG^#=107 kJ mol⁻¹; τ_1/2=26.8 h, respectively, at 23 °C. Complex 1 reacts with (1R,2S,5R)-menthol in sulphuric acid solution, followed by neutralisation with sodium carbonate to give a separable mixture of diastereomeric tricarbonyl[(2,3,4,5-η)-(1R^′,2S^′,5R^′)-6-menthyloxy-2-methyltropone]iron complexes, 9 and 10. The corresponding dimethylated complex 5 fails to react under these conditions.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.