Structural changes in metallothionein isoforms revealed by capillary electrophoresis and Brdicka reaction

Metallothionein (MT) as a potential cancer marker is at the center of interest and its properties, functions and behavior under various conditions is intensively studied. In the present study, two major mammalian MT isoforms (MT‐1 and MT‐2) were separated using capillary electrophoresis (CE) coupled with UV detector in order to describe their basic behavior. Under the optimized conditions, the separation of both isoforms was enabled as well as estimation of detection limits as subunits and units of ng per μL for MT‐2 and MT‐1, respectively. Further, the effects of thermal treatment and the presence of denaturing agent such as urea on MT‐1 and MT‐2 isoforms were studied by CE‐UV. Thermal treatment caused an increase in the signals of both isoforms. A new parameter called precipitation rate has been defined based on this finding. This parameter can be expressed as a slope of the linear regression of the time dependency curve recalculated on the MT concentration. The thermal precipitation rate for MT‐1 and MT‐2 was determined as 1.1 and 0.9 ng of MT/min, respectively. The chemical precipitation rate calculated from the linear regression for both isoforms provided the same value of 0.25 ng of MT/min. The results were confirmed by manual spectrometric measurements and by differential pulse voltammetry Brdicka reaction. Based on these results, a model of MT behavior under the conditions studied was suggested.     

Determination of the aggregation constants of bile salts by capillary electrophoresis

Summary Capillary electrophoresis has been investigated as a novel experimental method for determination of the aggregation constants of surfactants. The tendency of sodium cholate and sodium taurodeoxycholate to associate was studied in phosphate buffers of pH 8.0 and pH 7.0, respectively. Stepwise aggregation equilibria of bile salt monomers has been described in terms of massbalance equations. The Offord equation was used to model the electrophoretic mobility of the bile salt associates, and the experimental mobility values could be fitted to the model. Interestingly, only even-membered aggregates-dimers and tetramers-besides the monomers were proposed from the results of the curve-fitting for both bile salts. The aggregation constants calculated were (in molar units): cholate logK _A2=1.37, logK _A4=4.98 taurodeoxycholate logK _A2=1.68, logK _A4=6.46. From these values, more pronounced aggregation of taurodeoxycholate starting at lower concentrations has been deduced, supporting the back-to-back association model of bile salts.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.     

Enantioseparation of dansyl amino acids by ligand‐exchange capillary electrophoresis with zinc(II)‐L‐phenylalaninamide complex

A novel method of chiral ligand‐exchange CE was developed with L ‐amino acylamides as a chiral ligand and zinc(II) as a central ion. It has been demonstrated that these chiral complexes, such as Zn(II)‐L ‐alaninamide, Zn(II)‐L ‐prolinamide, and Zn(II)‐L ‐phenylalaninamide, are suitable for use as chiral selectors for the enantioseparation of either individual pair of or mixed dansyl amino acids. The optimal separation running buffer consisted of 5 mM ammonium acetate, 100 mM boric acid, 4 mM ZnSO₄·7 H₂O, and 8 mM L ‐amino acylamides at pH 8.2. The experiments showed that apart from the effect of the concentration of the complexes on the resolution and the migration time, the buffer pH also had a sharp influence on resolution. The employed chiral ligands exhibited different enantioselectivities and enantiomer migration orders. D ‐Amino acids migrate faster than L ‐amino acids when Zn(II)‐L ‐alaninamide and Zn(II)‐L ‐phenylalaninamide are used as chiral selectors, but it was observed that the migration order is reversed when Zn(II)‐L ‐prolinamide is used as the chiral selector. Furthermore, the amount of dansylated amino acids is found to be highly dependent on the labeling temperature.     

微芯片毛细管电泳快速测定盐酸洛美沙星

采用微芯片毛细管电泳非接触电导检测法快速测定了盐酸洛美沙星胶囊中盐酸洛美沙星的含量。探讨了缓冲液类型、浓度,添加剂种类、浓度及分离电压、进样时间等因素对分离检测的影响。实验采用5.0mmol/L HAc(pH=2.5)+5%乙醇为缓冲溶液,分离电压3.0 kV,在1 min内实现了盐酸洛美沙星的快速分离测定。优化条件下盐酸洛美沙星的线性范围为20.0～250.0μg/mL,检出限为10.0μg/mL(S/N=3),RSD=2.0%,加标回收率为98.6%～103%。     

食品中沙门菌和单增李斯特菌的多重PCR-芯片电泳快速检测

建立了食品中沙门菌和单增李斯特菌的多重PCR-芯片电泳快速检测方法。根据沙门菌和单增李斯特菌的特征基因合成2对特异性引物,优化聚合酶链反应(PCR)体系,采用芯片毛细管电泳快速检测食品中上述2种致病菌的多重PCR扩增产物。在优化的实验条件下,6 min内即可完成沙门菌和单增李斯特菌的同时检测;迁移时间的日内精密度为0.20%～1.7%,日间精密度3.7%～4.5%。     

Determination of ammonium in wastewaters by capillary electrophoresis on a column-coupling chip with conductivity detection

Analytical potentialities of a chip-based CE in determination of ammonium in wastewaters were investigated. CZE with the electric field and/or ITP sample stacking was performed on a column-coupling (CC) chip with integrated conductivity detectors. Acetate background electrolytes (pH ～3) including 18-crown-6-ether (18-crown-6) and tartaric acid were developed to reach rapid (in 7-8 min) CZE and ITP-CZE resolutions of ammonium from other cations (sodium, potassium, calcium and magnesium) present in wastewater samples. Under preferred working conditions (suppressed hydrodynamic flow (HDF) and EOF on the column-coupling chip), both the employed methods did provide very good repeatabilities of the migration (RSD of 0.2-0.8% for the migration time) and quantitative (RSD of 0.3-4.9% for the peak area) parameters in the model and wastewater samples. Using a 900-nL sample injection volume, LOD for ammonium were obtained at 20 and 40 μg/L concentrations in CZE and ITP-CZE separations, respectively. Very good agreements of the CZE and ITP-CZE determinations of ammonium in six untreated wastewater samples (only filtration and dilution) with the results obtained by a reference spectrometric method indicate a very good accuracy of both the CE methods presented.     

Methionine oxidation of proteins analyzed by affinity capillary electrophoresis in presence of silver(I) and gold(III) ions

Oxidative damage of biopharmaceuticals during manufacturing and storage is a key concern throughout pharmaceutical development. However, few simple and robust analytical methods are available for the determination of oxidation sites. Here, the potential of affinity capillary electrophoresis (ACE) in the separation of proteins with oxidized methionine (Met) residues is shown. Silver(I) and gold(I) ions have the attribute to selectively form complexes with thioethers over sulfoxides. The addition of these ions to the BGE leads to a selective complexation of Met residues and, thus, to a change of charge allowing separation of species according to the different oxidation states of Met. The mechanisms of these interactions are discussed and binding constants for peptides containing Met with silver(I) are calculated. Additionally, the proposed method can be used as an indicator of oxidative stress in large proteins. The presented technique is easily accessible, economical, and has rapid analysis times, adding new approaches to the analytical toolbox of Met sulfoxide detection.     

Trace analysis of glyphosate in water by capillary electrophoresis on a chip with high sample volume loadability

A new method for the determination of trace glyphosate (GLYP), non-selective pesticide, by CZE with online ITP pre-treatment of drinking waters on a column-coupling (CC) chip has been developed. CC chip was equipped with two injection channels of 0.9 and 9.9 μL volumes, two separation channels of 9.3 μL total volume and a pair of conductivity detectors. A very effective ITP sample clean-up performed in the first channel at low pH (3.2) was introduced for quick CZE resolution and detection of GLYP carried out at higher pH (6.1) in the second channel on the CC chip. The LOD for GLYP was estimated at 2.5 μg/L (15 nmol/L) using a 9.9 |mL volume of the injection channel. ITP-CZE analyses of model and real samples have provided very favorable intra-day (0.1-1.2% RSD) and inter-day (2.9% RSD) repeatabilities of the migration time for GLYP while 0.2-6.9% RSD values were typical for the peak area data. Recoveries of GLYP in spiked drinking water varied in the range of 99-109%. A minimum pre-treatment of drinking water (degassing and dilution) and a short analysis time (ca. 10 min) were distinctive features of ITP-CZE determinations of GLYP on the CC chip with high sample volume loaded, as well.     

Determination of heavy metal ions by microchip capillary electrophoresis coupled with contactless conductivity detection

An integrated detection circuitry based on a lock-in amplifier was designed for contactless conductivity determination of heavy metals. Combined with a simple-structure electrophoresis microchip, the detection system is successfully utilized for the separation and determination of various heavy metals. The influences of the running buffer and detection conditions on the response of the detector have been investigated. Six millimole 2-morpholinoethanesulfonic acid + histidine were selected as buffer for its stable baseline and high sensitivity. The best signals were recorded with a frequency of 38 kHz and 20 V(pp). The results showed that Mn(2+), Cd(2+), Co(2+), and Cu(2+) can be successfully separated and detected within 100 s by our system. The detection limits for five heavy metals (Mn(2+), Pb(2+), Cd(2+), Co(2+), and Cu(2+)) were determined to range from about 0.7 to 5.4 μM. This microchip system performs a crucial step toward the realization of a simple, inexpensive, and portable analytical device for metal analysis.     

Running buffers for determination of chromium(VI)/(III), cobalt(II) and zinc(II) in complex matrices by capillary electrophoresis with contactless conductivity detection

Complex matrices and rather high acidity in environmental samples are often the impelling challenges for the used running buffers of capillary electrophoresis. Twelve binary acid-base buffers were evaluated for separation of Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ in a sample containing various salts by capillary electrophoresis with contactless conductivity detector. The malic acid (MA) systems including MA-His (histidine), MA-Arg (arginine) and MA-Tris (tris(hydroxymethyl)aminomethane) were selected as the candidates with powerful separation efficiency and good response sensitivity. In the MA-Tris buffer, optimization were further carried out in terms of the pH value and the concentration of MA, and the optimal conditions were obtained as 6 mM MA-Tris and 2 mM 18-crown-6 at pH 3.5. Furthermore, a real application was demonstrated by analyzing the plating rinse water (pH 0.8), in which the Ca²⁺, Na⁺, Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ were all detected by adjusting at pH 3.5 with 5% (v/v) diluent ammonia. Both the cations, e.g., K⁺, Ca²⁺, Na⁺, Mg²⁺, and the common high concentration anions in the sample, e.g., Cl⁻, SO₄²⁻ and NO₃⁻ did not cause any disturbance to the concerned analytes.     

高速毛细管电泳安培法检测甲巯咪唑及其制剂

采用高速毛细管电泳安培法对甲巯咪唑(TMZ)及其制剂的测定进行了研究; 通过优化检测电位、毛细管长度和内径、分离电压、缓冲溶液等实验参数, TMZ在60 s内可以得到较好的分离, 线性范围在2.00×10-3～2.80×10-5 mol/L, 检出限为3.50×10-6 mol/L; 峰面积和迁移时间的相对标准偏差分别为2.7%、 1.2% (n＝8); 该法可用于制剂中TMZ的检测.     

毛细管区带电泳技术快速分离检测爆炸残留物中的无机离子

利用间接紫外毛细管区带电泳方法完成了对爆炸残留物中7种无机离子(K+,NH+4,NO-2,NO-3,SO2-4,ClO-3,ClO-4)的分离检测。阳离子测定采用的缓冲体系为10 mmol/L吡啶（pH 4.5）-3 mmol/L冠醚,K+和NH+4在2.6 min内达到基线分离,检出限分别为0.25 mg/L和0.10 mg/L(S/N=3)。阴离子测定采用的缓冲体系为40 mmol/L硼酸-1.8 mmol/L重铬酸钾-2 mmol/L硼酸钠（pH 8.6）,氢氧化四甲铵为电渗流改性剂,5种阴离子在4.6 min内达到基线分离,检出限为0.10～1.85 mg/L。该方法已成功地应用于实际爆炸物样品种类的判定分析,取得了很好的结果。     

Interaction of albumins and heparinoids investigated by affinity capillary electrophoresis and free flow electrophoresis

A fast and precise affinity capillary electrophoresis (ACE) method has been applied to investigate the interactions between two serum albumins (HSA and BSA) and heparinoids. Furthermore, different free flow electrophoresis methods were developed to separate the species which appears owing to interaction of albumins with pentosan polysulfate sodium (PPS) under different experimental conditions. For ACE experiments, the normalized mobility ratios (∆R/R_f), which provided information about the binding strength and the overall charge of the protein‐ligand complex, were used to evaluate the binding affinities. ACE experiments were performed at two different temperatures (23 and 37°C). Both BSA and HSA interact more strongly with PPS than with unfractionated and low molecular weight heparins. For PPS, the interactions can already be observed at low mg/L concentrations (3 mg/L), and saturation is already obtained at approximately 20 mg/L. Unfractionated heparin showed almost no interactions with BSA at 23°C, but weak interactions at 37°C at higher heparin concentrations. The additional signals also appeared at higher concentrations at 37°C. Nevertheless, in most cases the binding data were similar at both temperatures. Furthermore, HSA showed a characteristic splitting in two peaks especially after interacting with PPS, which is probably attributable to the formation of two species or conformational change of HSA after interacting with PPS. The free flow electrophoresis methods have confirmed and completed the ACE experiments.     

The effect of aggregation on the separation performance of bacteria in capillary electrophoresis

During the last 15 years, methods for the capillary electrophoretic separation of different bacteria species have been developed, which exploit their characteristic cell surface‐charge to volume ratio. A special variant, the polymer‐based CE of bacteria, includes a focusing step, which forces the bacteria cells to form aggregates at the beginning of the electrophoretic process, resulting in very high apparent efficiencies. Our experiments presented in this article reveal that the migration time of bacteria species in polymer‐based CE increases with a growing amount of injected cells. Thus, the electrophoretic mobilities are not characteristic for the single cells of one species, but for the aggregates of the bacteria species, which are formed during the focusing process. Electrophoretic mobility (EM) data are obviously inapplicable for the identification of bacteria if the concentration of the bacteria sample solution is not constant. Fractions taken during the electrophoretic separation of different bacteria species were cultivated and tested for species purity. Interestingly, the electrophoretic bands were never pure, as all of them contained different mixtures of the injected species. We attribute this to the formation of stable mixed‐species aggregates during polymer‐based focusing. The mixed clusters migrate in the electric field with consistent velocity as a whole and are not separated electrophoretically.     

Establishment and application of a new method for the determination of kinetic parameters by plug-plug kinetic capillary electrophoresis (ppKCE)

A novel plug-plug kinetic capillary electrophoresis method was established, which can be used to si-multaneously determine the kinetic parameters kon and koff in interaction systems. The method is comparatively simple and some restrictions in conventional ppKCE methods can be effectively avoided. The requirements for resolution and detection sensitivity in this method are much lower than those of conventional ppKCE. The successful determination of the kinetic parameters and the binding constant Kb between citalopram and BSA showed availability of this method. The results were confirmed by us-ing the time ratio method. The application field of kinetic capillary electrophoresis can be expanded with this new method.     

Composition and stability constants of copper(II) complexes with succinic acid determined by capillary electrophoresis

The advantage of capillary electrophoresis was demonstrated for studying a complicated system owing to the dependence of direction and velocity of the electrophoretic movement on the charge of complex species. The stability constants of copper(II) complexes with ions of succinic acid were determined by capillary electrophoresis, including the 1?:?2 metal to ligand complexes which are rarely mentioned. The measurements were carried out at 25 °C and ionic strength of 0.1, obtained by mixing the solutions of succinic acid and lithium hydroxide up to pH 4.2–6.2. It was shown that while pH was more than 4.5 the zone of copper(II) complexes with succinate moves as an anion. It is impossible to treat this fact using only the complexes with a metal-ligand ratio of 1?:?1 (CuL⁰, CuHL⁺). The following values of stability constants were obtained: log β(CuL) = 2.89 ± 0.02, log β(CuHL⁺) = 5.4 ± 0.5, log β(CuL₂^2?) = 3.88 ± 0.05, log β(CuHL₂^?) = 7.2 ± 0.3.     

Simultaneous detection of zinc dimethyldithiocarbamate and zinc ethylenebisdithiocarbamate in cabbage leaves by capillary electrophoresis with inductively coupled plasma mass spectrometry

We report a simple and highly sensitive method for the simultaneous detection of trace zinc dimethyldithiocarbamate and zinc ethylenebisdithiocarbamate by capillary electrophoresis with inductively coupled plasma mass spectrometry. Zinc dimethyldithiocarbamate and zinc ethylenebisdithiocarbamate were chelated with trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetic acid to form a macromolecule complex. Then, these two compounds were separated by α‐cyclodextrin‐modified capillary electrophoresis within 12 min at a separation voltage of 15 kV and measured by inductively coupled plasma mass spectrometry. The developed method is sensitive with detection limit of 1.9 and 3.0 ng Zn/mL for zinc dimethyldithiocarbamate and zinc ethylenebisdithiocarbamate, respectively. By means of ultrasound‐assisted extraction methods, zinc dimethyldithiocarbamate and zinc ethylenebisdithiocarbamate spiked into cabbage leaves were successfully extracted and determined with a relative standard deviation (n  = 5) ≤ 6% and a recovery of 95–107%.     

乙醛酸和草酸的毛细管区带电泳分析

建立了同时测定乙醛酸和草酸的毛细管区带电泳法。考察了缓冲溶液的种类、浓度和pH以及分离电压等因素对分离结果的影响。在缓冲溶液为20 mmol/L硼砂-5.5 mmol/L邻苯二甲酸氢钾(pH 9.0)、分离电压20 kV、检测波长212 nm的优化条件下,11 min内即可实现对目标物的分离。乙醛酸和草酸分别在0.8～20 g/L和1.2～20 g/L范围内线性关系良好,相关系数分别为0.9993和0.9975;方法的检出限分别为0.2和0.4 g/L(信噪比为3);样品的加标回收率为98.3%～102.5%,相对标准偏差为0.35%～0.61%。该方法操作简便、快速、成本低廉,已应用于实际样品的分析,并获得了令人满意的结果。     

高效毛细管电泳法拆分芳香醇类化合物的研究

以磺化的环糊精为手性选择剂,采用毛细管电泳法对10种结构相近的芳香醇类化合物进行了手性拆分的研究.分离过程通过11次实验分别建立了10种手性醇对映体分离度的目标函数,考察了3个主要因素（溶液的pH、分离电压和手性选择剂浓度）对分离效率的影响.从分离度响应曲面图可得到最佳的分离条件,在选定的优化条件下,10种手性芳香醇在10 min内均得到了满意的拆分效果.