Growth of epitaxial thin Pd(1 1 1) films on Pt(1 1 1) and oxygen-terminated FeO(1 1 1) surfaces

Thin Pd films (1-10 monolayers, ML) were deposited at 35 K on a Pt(1 1 1) single crystal and on an oxygen-terminated FeO(1 1 1) monolayer supported on Pt(1 1 1). Low energy electron diffraction, Auger electron spectroscopy, and Kr and CO temperature programmed desorption techniques were used to investigate the annealing induced changes in the film surface morphology. For growth on Pt(1 1 1), the films order upon annealing to 500 K and form epitaxial Pd(1 1 1). Further annealing above 900 K results in Pd diffusion into the Pt(1 1 1) bulk and Pt-Pd alloy formation. Chemisorption of CO shows that even the first ordered monolayer of Pd on Pt(1 1 1) has adsorption properties identical to bulk Pd(1 1 1). Similar experiments conducted on FeO(1 1 1) indicate that 500 K annealing of a 10 ML thick Pd deposit also yields ordered Pd(1 1 1). In contrast, annealing of 1 and 3 ML thick Pd films did not result in formation of continuous Pd(1 1 1). We speculate that for these thinner films Pd diffuses underneath the FeO(1 1 1).     

Comparison of sulfur interaction with hydrogen on Pt(1 1 1), Ni(1 1 1) and Pt3Ni(1 1 1) surfaces: The effect of intermetallic bonding

Adsorption strengths of hydrogen and sulfur both individually and together as co-adsorbates were investigated on Pt(1 1 1), Ni(1 1 1) and Pt₃Ni(1 1 1) surfaces using density functional theory in order to determine the effect of metal alloying on sulfur tolerance. The adsorption strengths of H and S singly follow the same trend: Ni(1 1 1) > Pt(1 1 1) > Pt₃Ni(1 1 1), which correlates well with the respective d-band center positions of each surface. We find that the main effect of alloying is to distort both the sub-layer structure and the Pt overlayer resulting in a lowered d-band. For all three surfaces, the d-band shifts downward non-linearly as a function of S coverage. Nearly identical decreases in d-band position were calculated for each surface, leading to an expectation that subsequent adsorption of H would scale with surface type similarly to single species adsorption. In contradiction to this expectation, there was no clearly discernable difference between the energies of coadsorbed H on Pt(1 1 1) and Ni(1 1 1) and only a slightly lowered energy on Pt₃Ni(1 1 1). This provides evidence that coadsorbed species in close proximity interact directly through itinerant mobile electrons and through electrostatic repulsion rather than solely through the electronic structure of the surface. The combination of the lowered d-band position (arising from distorted geometry) and direct co-adsorbate interactions on Pt₃Ni(1 1 1) leads to a lower energy barrier for H₂S formation on the surface compared to pure Pt(1 1 1). Thus, alloying Pt with Ni both decreases the likelihood of S adsorption and favors S removal through H₂S formation.     

A PdO(1 0 1) thin film grown on Pd(1 1 1) in ultrahigh vacuum

We present experimental results demonstrating that a high quality PdO(1 0 1) thin film can be grown on Pd(1 1 1) in ultrahigh vacuum by oxidizing the metal at 500 K using an oxygen atom beam, followed by annealing to 675 K. Low energy electron diffraction (LEED) images show that the [0 1 0] direction of the PdO(1 0 1) thin film aligns with the [−1 1 0] direction of the Pd(1 1 1) substrate, and that the PdO film grows in three degenerate domains, rotated 120° relative to one another. Based on excellent agreement between the experimental and simulated LEED patterns, we conclude that the surface structure of the PdO thin film deviates minimally from bulk-terminated PdO(1 0 1). Recent temperature programmed desorption (TPD) experiments also provide evidence that the PdO(1 0 1) thin film on Pd(1 1 1) is terminated by the stoichiometric surface in which half of the Pd atoms are coordinatively unsaturated (cus), corresponding to a cus-Pd atom density equal to about 35% of the surface density of Pd(1 1 1). The ability to generate a well-defined PdO(1 0 1) surface in ultrahigh vacuum should provide new opportunities for conducting model surface science studies of PdO, particularly studies aimed at elucidating the reactivity of PdO(1 0 1) toward species important in commercial applications of Pd catalysis.     

Diffusions of small clusters on Pt(1 1 1) and Cu(1 1 1) surfaces

Diffusions of small cluster Pt₆ on Pt(1 1 1) surface and Cu₆ on Cu(1 1 1) are studied by molecular dynamics simulation, respectively. The atomic interaction is modeled by the semiempirical potential. The results show that the diffusion processes in the two systems are far different. For example, on Pt(1 1 1) surface, the hopping of single atom and the shearing of two atoms of hexamer only occur on the adatom(s) adsorbed at B-step, while on Cu(1 1 1) surface they can appear on the adatom(s) either at A-step or B-step. To the concerted translation of the parallelogram hexamer, the anisotropy in the diffusion path is observed in the two systems, the mechanisms and then the preferential paths, however, are completely different. The reasons for these diffusion characteristics and differences are discussed.     

Density functional theory investigation of CN on Cu(1 1 1), Ni(1 1 1) and Ni(1 0 0)

The adsorption of CN on Cu(1 1 1), Ni(1 1 1) and Ni(1 0 0) has been investigated using density functional theory (DFT). While experimental studies of CN on Cu(1 1 1) show the molecular axis to be essentially parallel to the surface, the normally-preferred DFT approach using the generalised gradient approximation (GGA) yields a lowest energy configuration with the C-N axis perpendicular to the surface, although calculations using the local density approximation (LDA) do indicate that the experimental geometry is energetically favoured. The same conclusions are found for CN on Ni(1 1 1); on both surfaces bonding through the N atom is always unfavourable, in contrast to some earlier published results of ab initio calculations for Ni(1 1 1)/CN and Ni(1 0 0)/CN. The different predictions of the GGA and LDA approaches may lie in subtly different relative energies of the CN 5σ and 1π orbitals, a situation somewhat similar to that for CO adsorbed on Pt(1 1 1) which has proved challenging for DFT calculations. On Ni(1 0 0) GGA calculations favour a lying-down species in a hollow site in a geometry rather similar to that found experimentally and in GGA calculations for CN on Ni(1 1 0).     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.     

Mass and lattice effects in trapping: Ar, Kr, and Xe on Pt(1 1 1), Pd(1 1 1), and Ni(1 1 1)

The trapping probabilities of argon, krypton, and xenon on Pd(1 1 1) and Ni(1 1 1) have been investigated using supersonic molecular beam techniques. The trapping probability of argon exhibits normal incident energy in a similar fashion on both Pd(1 1 1) and Pt(1 1 1) because the mass of argon is significantly less than the surface mass of either Pd or Pt. In contrast, dynamic corrugation in the gas-surface potential is observed for krypton trapping on Pt(1 1 1) and Pd(1 1 1), resulting in a decreased angular dependence of the trapping probability compared to argon. For xenon trapping on Pd significant lattice deformation during the gas-surface collision appears to give rise to total energy scaling. The trapping probability of xenon on Pd(1 1 1) remains high at unusually high incident kinetic energies due to the overall enhanced energy transfer from the incident atom to the lattice. Trapping probabilities of Ar, Kr, and Xe are significantly lower on Ni(1 1 1) than on either Pt(1 1 1) or Pd(1 1 1) despite the lower surface mass of the Ni atoms. This result is attributed to the lower binding energy of the rare gases on Ni(1 1 1) and the higher Debye temperature of Ni. The energy scaling of Ar trapping on Ni(1 1 1) is determined by static corrugation, but the energy scaling for Kr and Xe on Ni(1 1 1) may involve the effects of dynamic corrugation. In the latter cases, the greater stiffness of the nickel lattice decreases the dynamic corrugation relative to Pt(1 1 1) and Pd(1 1 1).     

Growth and morphology of the epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) Trilayers

Growth and surface morphology of epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) trilayers constituting a magnetic tunnel junction were investigated by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). STM reveals a grain-like growth mode of MgO on Fe(1 1 0) resulting in dense MgO(1 1 1) films at room temperature as well as at 250 °C. As observed by STM, initial deposition of MgO leads to a partial oxidation of the Fe(1 1 0) surface which is confirmed by Auger electron spectroscopy. The top Fe layer deposited on MgO(1 1 1) at room temperature is relatively rough consisting of clusters which can be transformed by annealing to an atomically flat epitaxial Fe(1 1 0) film.     

Temperature dependent LEED study of Pb{1 1 1}

The thermal behavior of Pb{1 1 1} was studied using low-energy electron diffraction (LEED) in the temperature range 11–323 K. The surface interlayer spacings increase with temperature at about the same rate as the bulk up to 0.5 T_m, and then increase faster. The relaxation of the surface, which is larger than for other fcc {1 1 1} surfaces, is maintained in the temperature range studied. Although Pb has a larger expansion coefficient than other metals, the surface thermal expansion behavior is in line with other surfaces, and is consistent with harmonic interplanar potentials.     

Kinetic length and step permeability on the Si(1 1 1) (1 × 1) surface

Information on the kinetic regime of step motion and step permeability on the Si(1 1 1) (1 × 1) surface has been obtained from observations of island decay that were made with low energy electron microscopy. Island area during decay exhibits the expected power law dependence on time, with exponent, α, that is a qualitative indicator of the kinetic regime. A new method is presented for determining the kinetic length quantitatively from measurements of the decay exponent in the symmetric island decay geometry on top of a larger concentric circular island. Using this approach, we determine the kinetic length on the Si(1 1 1) (1 × 1) surface at 1163 K to be d ∼ 75a, where a is the lattice constant. It is shown that this result locates step motion firmly in the diffusion limited regime. Mass conservation of decaying island stacks is also observed at this temperature, which indicates that steps are effectively impermeable in the context of diffusion limited step kinetics.     

Composition and structure of chemically prepared GaAs(1 1 1)A and (1 1 1)B surfaces

The (1 1 1)A and (1 1 1)B surfaces of GaAs chemically treated in HCl-isopropanol solution (HCl-iPA) and annealed in vacuum were studied by means of X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED) and electron energy loss spectroscopy (EELS). To avoid uncontrolled contamination, chemical treatment and sample transfer into UHV were performed under pure nitrogen atmosphere. The HCl-iPA treatment removes gallium and arsenic oxides, with about 0.5-3 ML of elemental arsenic being left on the surface, depending on the crystallographic orientation. With the increase of the annealing temperature, a sequence of reconstructions were identified by LEED: (1 × 1) and (2 × 2) on the (1 1 1)A surface and (1 × 1), (2 × 2), (1 × 1), (3 × 3), (√19 × √19) on the (1 1 1)B surface. These sequences of reconstructions correspond to the decrease of surface As concentration. The structural properties of chemically prepared GaAs(1 1 1) surfaces were found to be similar to those obtained by decapping of As-capped epitaxial layers.     

The surface structure of BaO on Pt(1 1 1): (2 × 2)-reconstructed BaO(1 1 1)

The surface structure of BaO(1 1 1) has been determined using STM and computer modelling. The BaO(1 1 1) surface was prepared in thin film form on Pt(1 1 1) and presents a surface with twice the lattice parameter expected for that of the bulk termination, i.e. a (2 × 2) reconstruction. Computer modelling indicates that the bulk termination is unstable, but that the (2 × 2) reconstructed BaO(1 1 1) surface has a low surface energy and is hence a stable surface reconstruction. The (2 × 2) reconstruction consists of small, three-sided pyramids with (1 0 0) oriented sides and either oxygen or barium ions at the apices. Less regular surface reconstructions containing the same pyramids are almost equally stable, indicating that we may also expect less regular regions to appear with a fairly random distribution of these surface species. The simulations further suggest that a regular (4 × 4) reconstruction built up of bigger pyramids is even more energetically favourable, and some evidence is found for such a structure in the STM.     

STM study of the Mo(1 1 2) and Mo(1 1 1) surfaces

The Mo(1 1 2) and Mo(1 1 1) surfaces have been studied by STM and DFT/GGA modeling. Due to high quality and cleanness of the surfaces, for the first time good STM images of large fragments of the Mo(1 1 2) and Mo(1 1 1) have been obtained. Lack of atomic resolution in the rows of the Mo(1 1 2) surface is attributed to flatness of distribution of density of the electronic states along the rows. This suggestion is illustrated by comparison of STM images for Mo(1 1 1) and Mo(1 1 2) and model calculations of STM pictures for these surfaces.     

Adsorption of water on TiN (1 0 0), (1 1 0) and (1 1 1) surfaces: A first-principles study

We use first-principles density functional theory-based calculations in the analysis of the interaction of H₂O with (1 0 0), (1 1 0) and (1 1 1) surfaces of TiN, and develop understanding in terms of surface energies, polarity of the surface and chemistry of the cation, through comparison with H₂O adsorption on ZrN. While water molecule physisorbs preferentially at Ti site of (1 0 0) and (1 1 1) surfaces, it adsorbs dissociatively on (1 1 0) surface of TiN with binding stronger than almost 1.32 eV/molecule. Our analysis reveals the following general trends: (a) surfaces with higher energies typically lead to stronger adsorption, (b) dissociative adsorption of H₂O necessarily occurs on a charge neutral high energy surface and (c) lower symmetry of the (1 1 0) plane results in many configurations of comparable stability, as opposed to the higher symmetry (1 0 0) and (1 1 1) surfaces, which also consistently explain the results of H₂O adsorption on MgO available in literature. Finally, weaker adsorption of H₂O on TiN than on ZrN can be rationalized in terms of greater chemical stability of Ti arising from its ability to be in mixed valence.     

Structures and stability of Ag clusters on Ag(1 1 1) and Ni(1 1 1) surfaces

The structures of the lowest total energy for small Ag_N clusters with N = 2-20, which are grown on Ag(1 1 1) and Ni(1 1 1) surfaces, have been determined using a combination of the embedded-atom method and the basin-hopping algorithm. It is found that the particularly stable Ag clusters with N<18 have similar geometries on both surfaces when comparing clusters of the same size. On the other hand, the geometries of the less stable Ag clusters in the same size range differ for the two surfaces. From N?18, the sizes of the particularly stable structures are different for the two different substrates. Due to the large size mismatch of the two types of atoms it is energetically unfavorable for Ag to form a pseudomorphic monolayer structures on Ni(1 1 1) and there is considerable strain produced at the interface. The effect of this strain and the increased adatom-substrate interactions lead to irregular and elongated structures of the adsorbed Ag clusters.     

Scattering effects and damping of electrons in Pt(1 1 1) and Cu(1 1 1)

In this work an analysis of experimental and theoretical data associated with the scattering and attenuation of electrons in the Pt(1 1 1) and Cu(1 1 1) crystalline samples is presented. The information about the crystalline structure of the first few atomic layers was obtained by the directional elastic peak electron spectroscopy (DEPES) at the primary electron beam energies E_p from 1.5 keV to 2.0 keV. The comparison of the experimental and theoretical DEPES distributions indicates a qualitative agreement between experiment and theory. The relative signal values associated with the intensity maxima were found to be different. The latter effect suggest that the electron attenuation in the crystalline samples can have an anisotropic character. A qualitative analysis of the characteristic pattern around the [1 1 1] direction concerning the calculation of the scattering factors was performed. The collective scattering of electrons by atoms located around the threefold symmetry axis resulting in the so called ring focusing effect is discussed.     

Growth of (√3 × √3)-Ag and (1 1 1) oriented Ag islands on Ge/Si(1 1 1) surfaces

We have studied the growth of Ag on Ge/Si(1 1 1) substrates. The Ge/Si(1 1 1) substrates were prepared by depositing one monolayer (ML) of Ge on Si(1 1 1)-(7 × 7) surfaces. Following Ge deposition the reflection high energy electron diffraction (RHEED) pattern changed to a (1 × 1) pattern. Ge as well as Ag deposition was carried out at 550 °C. Ag deposition on Ge/Si(1 1 1) substrates up to 10 ML has shown a prominent (√3 × √3)-R30° RHEED pattern along with a streak structure from Ag(1 1 1) surface. Scanning electron microscopy (SEM) shows the formation of Ag islands along with a large fraction of open area, which presumably has the Ag-induced (√3 × √3)-R30° structure on the Ge/Si(1 1 1) surface. X-ray diffraction (XRD) experiments show the presence of only (1 1 1) peak of Ag indicating epitaxial growth of Ag on Ge/Si(1 1 1) surfaces. The possibility of growing a strain-tuned (tensile to compressive) Ag(1 1 1) layer on Ge/Si(1 1 1) substrates is discussed.     

Structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) reconstructions

We have performed the structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) surfaces in the submonolayer regime utilizing low-energy electron diffraction and scanning tunneling microscopy (STM). The almost identical series of one-dimensional chain structures (e.g., 3 × 2/3 × 1, 5 × 1, 7 × 1, 9 × 1, and 2 × 1 phases) are found in order of increasing metal coverage for both adsorbed systems, however, only the Eu/Si system reveals the ‘√3’-like reconstruction before the 2 × 1 endpoint phase. The atomic models of chain structures are proposed and discussed. In particular, our results suggest the odd-order n×1 (n=5,7,9,…) intermediate reconstructions to incorporate the Seiwatz chains and honeycomb chains with the proportion of m:1, where . The statistical analysis of STM images is carried out to examine the correlation of atomic rows on Eu/Si and Yb/Si surfaces. It is found that Eu stabilizes more ordered row configuration compared to Yb, which can be explained in terms of indirect electronic interaction of atomic chains or/and different magnetic properties of adsorbed species.     

Surface phonons of GaP(1 1 0) and InAs(1 1 0)

The dispersions of low energy surface phonon modes of GaP(1 1 0) and InAs(1 1 0) measured with inelastic He-atom scattering along the and 0 0 1 directions are presented. Aside from the Rayleigh mode, additional distinct acoustic modes are observed as well as indications of optical modes. Contrary to results for GaAs(1 1 0), a rocking mode was not observed. The experimentally determined phonon dispersions are in excellent agreement with recent ab initio calculations by C. Eckl, et al. [1].     

Photoemission study of the Li/Ge(1 1 1)-3 × 1 reconstruction

In this article we report our findings on the electronic structure of the Li induced Ge(1 1 1)-3 × 1 reconstruction as determined by angle-resolved ultraviolet photoelectron spectroscopy (ARUPS) and core-level spectroscopy using synchrotron radiation. The results are compared to the theoretical honeycomb-chain-channel (HCC) model for the 3 × 1 reconstruction as calculated using density functional theory (DFT). ARUPS measurements were performed in both the and directions of the 1 × 1 surface Brillouin zone at photon energies of 17 and 21.2 eV. Three surface related states were observed in the direction. In the direction, at least two surface states were seen. The calculated band structure using the single-domain HCC model for Li/Ge(1 1 1)-3 × 1 was in good agreement with experiment, allowing for the determination of the origin of the experimentally observed surface states. In the Ge 3d core-level spectra, two surface related components were identified, both at lower binding energy with respect to the Ge 3d bulk peak. Our DFT calculations of the surface core-level shifts were found to be in fair agreement with the experimental results. Finally, in contrast to the Li/Si(1 1 1)-3 × 1 case, no double bond between Ge atoms in the top layer was found.