Homogeneous DNA Detection Based on Fluorescence Quenching by Nanoparticles in Single-step Format :Target-Induced Configuration Transform

A new strategy for homogeneous detection of DNA hybridization in single-step format was developed based on fluorescence quenching by gold nanoparticles. The gold nanoparticle is functionalized with 5’-thiolated 48-base oligonucleotide (probe sequence), whose 3’-terminus is labeled with fluorescein (FAM), a negatively charged fluorescence dye. The oligonucleotide adopts an extended configuration due to the electrostatic repulsion between negatively charged gold nanoparticle and the FAM-attached probe sequence. After addition of the complementary target sequence, specific DNA hybridization induces a conformation change of the probe from an extended structure to an arch-like configuration, which brings the fluorophore and the gold nanoparticle in close proximity. The fluorescence is efficiently quenched by gold nanoparticles. The fluorescence quenching efficiency is related to the target concentration, which allows the quantitative detection for target sequence in a sample. A linear detection range from 1.6 to 209.4 nmol/L was obtained under the optimized experimental conditions with a detection limit of 0.1 nmol/L. In the assay system, the gold nanoparticles act as both nanoscaffolds and nanoquenchers. Furthermore, the proposed strategy, in which only two DNA sequences are involved, is not only different from the traditional molecular beacons or reverse molecular beacons but also different from the commonly used sandwich hybridization methods. In addition, the DNA hybridization detection was achieved in homogenous solution in a single-step format, which allows real-time detection and quantification with other advantages such as easy operation and elimination of washing steps.     

Analytical performance of molecular beacons on surface immobilized gold nanoparticles of varying size and density

The high quenching efficiency of metal nanoparticles has facilitated its use as quenchers in molecular beacons. To optimize this system, a good understanding of the many factors that influence molecular beacon performance is required. In this study, molecular beacon performance was evaluated as a function of gold nanoparticle size and its immobilization characteristics. Gold nanoparticles of 4 nm, 15 nm and 87 nm diameter, were immobilized onto glass slides. Each size regime offered distinctive optical properties for fluorescence quenching of molecular dyes that were conjugated to oligonucleotides that were immobilized to the gold nanoparticles. Rigid double stranded DNA was used as a model to place fluorophores at different distances from the gold nanoparticles. The effect of particle size and also the immobilization density of nanoparticles was evaluated. The 4 nm and 87 nm gold nanoparticles offered the highest sensitivity in terms of the change in fluorescence intensity as a function of distance (3-fold improvement for Cy5). The optical properties of the molecular fluorophore was of significance, with Cy5 offering higher contrast ratios than Cy3 due to the red-shifted emission spectrum relative to the plasmon peak. A high density of gold nanoparticles reduced contrast ratios, indicating preference for a monolayer of immobilized nanoparticles when considering analytical performance. Molecular beacon probes were then used in place of the double stranded oligonucleotides. There was a strong dependence of molecular beacon performance on the length of a linker used for attachment to the nanoparticle surface. The optimal optical performance was obtained with 4 nm gold nanoparticles that were immobilized as monolayers of low density (5.7 × 10¹¹ particles cm⁻²) on glass surfaces. These nanoparticle surfaces offered a 2-fold improvement in analytical performance of the molecular beacons when compared to other nanoparticle sizes investigated. The principles developed in this study would assist in the design of solid phase molecular beacons using gold nanoparticles.     

Surface-enhanced Raman nanoparticle beacons based on bioconjugated gold nanocrystals and long range plasmonic coupling

We have developed a new class of surface-enhanced Raman scattering beacons (SERS beacons) that can be turned on and off by long-range plasmonic coupling, induced by biomolecular recognition and binding events. The beacons are based on colloidal gold nanocrystals in two sizes (40 and 60 nm) and are prepared by spectral encoding with a Raman reporter molecule, functionalized with thiolated DNA probes, and stabilized and protected by low molecular weight poly(ethylene glycol)s (PEGs). The results show the SERS signal intensities increase by 40-200-fold when the nanoparticle beacons are activated by plasmonic coupling, much higher than the bright-to-dark intensity ratios reported for traditional molecular beacons. Multivalent gold nanoparticles also have exquisite specificity and are able to recognize single-base mismatches or mutations. This class of SERS nanoparticle beacons has novel mechanisms for molecular detection and signal amplification, and its long-range coupling nature raises new opportunities in developing plasmonic probes to detect proteins, cells, and intact viruses.     

Electrochemical detection of miRNA-21 based on molecular beacon formed by thymine-mercury(II)-thymine base pairing

We present a molecular beacon-based electrochemical biosensor with high sensitivity and specificity for the detection of microRNA-21. A special oligonucleotide probe was prepared containing a nucleotide sequence complementary to miR-21 and consecutively linking eight and six thymines to the 3′ and 5′ ends, respectively, to allow the formation of a T-Hg²⁺-T complex-based molecular beacon on the electrode surface by the selective binding of Hg²⁺ ions. The introduction of multiple thymines at the end of the probe avoids base overlapping between the miRNA sequence and the molecular beacon formation sequence, enabling a universal probe design that can detect all types of miRNAs. A ferrocene moiety was attached to the 5′-end of the specially designed probe as an electrochemical signal indicator. The molecular beacons are formed by six consecutive T-Hg²⁺-T pairs by Hg²⁺ addition, and the molecular beacons are destroyed by perfect hybridization between 22 bases as a result of miR-21 addition. Based on this detection mechanism, we were able to detect miR-21 with LODs of 0.64 pM and 1.08 pM in buffer solution and human serum, respectively. In addition, the specifically designed oligonucleotide probe showed perfect specificity in detecting only miR-21 without binding to other miRNAs. Finally, the sensor showed excellent miR-21 recovery ability from samples spiked into serum, indicating that the method described in this study worked perfectly, even in a turbid complex matrix such as human serum.     

Electrochemical Determination of the p53 Tumor Suppressor Gene Using a Gold Nanoparticle-Graphene Nanocomposite Modified Glassy Carbon Electrode

A novel sensitive and simple electrochemical DNA sensor is reported for the determination of p53 tumor suppressor gene. A gold nanoparticle/graphene nanocomposite-modified glassy carbon electrode was prepared and methylene blue was used as the hybridization redox indicator. Scanning electron microscopic and electrochemical characterization demonstrated that the gold nanoparticles and graphene were present on the electrode. The resulting sensor provided suitable electrochemical response to the p53 tumor suppressor gene with a linear dynamic range from 0.1 to 1000?nM. The limit of detection was 0.012?nM. The sensor was able to differentiate a complete complementary DNA sequence, single-base mismatched DNA sequence, and a three-base mismatched DNA sequence. The precision of the device was satisfactory, with a relative standard deviation of 4.1% for 11 measurements. The combination of gold nanoparticles and a graphene nanocomposite provided enhanced capabilities for the determination of DNA for clinical applications.     

分子信标的构建及其应用研究进展

分子信标（molecular beacon,MB）是一种寡聚核苷酸荧光探针,其具有灵敏度高、特异性强、操作简单以及不必与未反应的探针分离即可实时检测等优点,在分子生物学和基因组学及分子医学等领域具有十分重要的应用价值。 本文介绍了近年来出现的各种新型分子信标的结构及工作原理,概述了分子信标技术在生命科学领域中的应用,展望了分子信标技术的发展趋势。     

DNA detection method based on the two-dimensional aggregation and selective desorption of nanoparticle probes

A label-free two-dimensional colorimetric DNA sensor is reported. This sensor is based on the 2D aggregation of oligonucleotide-modified gold nanoparticle probes induced by the molecular hybridization of single-stranded oligonucleotide probes and their complementary single-stranded DNA targets. To detect the aggregation, we have developed a new detection method based on the selective desorption of nonaggregated nanoparticles. We will show here that this detection method is highly specific and allows the quantification of the DNA targets.     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

Preparation of Nanogapped Gold Nanoparticle Array for DNA Detection

A novel DNA detection technique using a gold nanoparticle array film electrode has been reported here. The gold nanoparticles molecularly linked with binder molecule (1,10‐decanedithiol) were separated 1.3 nm from each other, and the DNA conductivity change from single to double strand was measured by monitoring a voltage drop across the particles, between which a probe of a 12‐mer oligonucleotide was immobilized. In adding a complementary oligonucleotide on the nanoparticle film chip, an immediate decrease in the film resistance (ca. 1.4 Ω) due to a hybridization event occurred in a reproducible manner with this simple setup. In the paper, we have an interest in the primary sensing properties; effect of the film resistance on the sensor response, dependence of the resistance change on the DNA concentration, and the performance of the system for DNA detection including single nucleotide polymorphisms were described.     

An aptamer-based assay for thrombin via structure switch based on gold nanoparticles and magnetic nanoparticles

An aptamer-based assay for thrombin with high specificity and sensitivity was presented. In the protocol, the aptamer for thrombin was immobilized on magnetic nanoparticle, and its complementary oligonucleotide was labeled with gold nanoparticles, then the aptamer was hybridized with the complementary oligonucleotide to form the duplex structure as a probe, this probe could be used for the specific recognition for thrombin. In the presence of thrombin, the aptamer prefer to form the G-quarter structure with thrombin, resulting in the dissociation of the duplex of the probe and the release of the gold labeled oligonucleotide. Upon this, we were able to detect thrombin through the detection of the electrochemical signal of gold nanoparticles. The strategy combines with the high specificity of aptamer and the excellent characteristics of nanoparticles. This assay is simple, rapid, sensitive and highly specific, it does not require labeling of thrombin, and it could be applied to detect thrombin in complex real sample. The method shows great potential in other protein analysis and in disease diagnosis.     

A novel adenosine-based molecular beacon probe for room temperature nucleic acid rapid detection in cotton thread device

We used cotton thread as substrate to develop a novel room temperature DNA detection device for low-cost, sensitive and rapid detection of a human genetic disease, hereditary tyrosinemia type I related DNA sequences. A novel adenosine based molecular beacon (ABMB) probe modified on gold nanoparticle was used as reporter probe. In the presence of coralyne, a small molecule which can react with adenosines, the ABMB would form a hairpin structure just like traditional molecular beacon used extensively. In the presence of target DNA sequences, the hairpin structure of ABMB modified on gold nanoparticles will be opened and the biotin group modified at one end of the DNA probes will be released and react with the streptavidin immobilized on the test zone of the cotton thread. The response of the thread based DNA test device is linear over the range of 2.5–100 nM complementary DNA. The ability of our developed device for discriminating the single base mismatched DNA related to a human genetic disease, hereditary tyrosinemia type I, was improved comparing with previous report. It is worth mentioning that the whole assay procedure for DNA test is performed under room temperature which simplified the assay procedures greatly.     

利用互补核酸杂交富集金胶实现信号扩增的电化学凝血酶蛋白生物传感器研究

介绍了一种利用互补核酸杂交富集金胶实现信号扩增的蛋白质生物传感器. 以凝血酶蛋白为研究对象, 利用凝血酶蛋白相对应的两段核酸适配体, 将适配体Ⅰ固定在磁性颗粒上, 用于特异性地捕获蛋白, 将适配体Ⅱ标记金胶作为检测信标. 由凝血酶蛋白和相对应的两段核酸适配体构建三明治结构的凝血酶蛋白生物传感器. 另外, 再通过信标金胶上过剩的核酸适配体链与另一段标记有金胶的互补核酸进一步杂交, 获得金胶的选择性聚集, 实现了信号扩增. 通过信号扩增, 使此传感器的灵敏度大大提高, 对凝血酶蛋白的检测下限可达到4.52×10-15 mol/L. 平行测定浓度为7.47×10-14 mol/L的凝血酶8次, 其RSD为3.0%. 该生物传感器对凝血酶蛋白有很好的特异性, 其它蛋白如溶菌酶和牛血清白蛋白的存在对于检测没有影响.     

基于锁核酸的高选择性新型分子信标

通过在分子信标的错配位点修饰锁核酸, 不仅可有效地改善其单碱基错配识别能力, 还可提高检测灵敏度. 因而有望发展成为一种通用的提高分子信标单碱基错配识别能力的方法.     

A Telomerase‐Specific Doxorubicin‐Releasing Molecular Beacon for Cancer Theranostics

A molecular beacon‐based drug delivery system was designed for both detection of telomerase activity in living cells and telomerase‐triggered drug release for precise cancer treatment. This system is composed of a gold nanoparticle core densely packed with FITC‐labeled hairpin DNA sequences hybridized with telomerase primers. Molecules of the anticancer drug doxorubicin were intercalated into the stem region of the DNA sequence. The presence of telomerase will elongate the primers, leading to inner chain substitution followed by the release of the FITC fluorescence and the trapped doxorubicin. This molecular beacon could specifically distinguish tumor cells and normal cells based on telomerase activity, precisely release doxorubicin in response to telomerase activity in the tumor cells, and prevent toxicity to normal organs.     

Self-assembled nanoparticle probes for recognition and detection of biomolecules

Colloidal gold nanocrystals have been used to develop a new class of nanobiosensors that is able to recognize and detect specific DNA sequences and single-base mutations in a homogeneous format. At the core of this biosensor is a 2.5-nm gold nanoparticle that functions as both a nano-scaffold and a nano-quencher (efficient energy acceptor). Attached to this core are oligonucleotide molecules labeled with a thiol group at one end and a fluorophore at the other. This hybrid bio/inorganic construct is found to spontaneously assemble into a constrained arch-like conformation on the particle surface. Binding of target molecules results in a conformational change, which restores the fluorescence of the quenched fluorophore. Unlike conventional molecular beacons with a stem-and-loop structure, the nanoparticle probes do not require a stem, and their background fluorescence increases little with temperature. In comparison with the organic quencher Dabcyl (4,4'-dimethylaminophenyl azo benzoic acid), metal nanoparticles have unique structural and optical properties for new applications in biosensing and molecular engineering.     

Hybridization of DNA and PNA molecular beacons to single-stranded and double-stranded DNA targets

Molecular beacons are sensitive fluorescent probes hybridizing selectively to designated DNA and RNA targets. They have recently become practical tools for quantitative real-time monitoring of single-stranded nucleic acids. Here, we comparatively study the performance of a variety of such probes, stemless and stem-containing DNA and PNA (peptide nucleic acid) beacons, in Tris-buffer solutions containing various concentrations of NaCl and MgCl(2). We demonstrate that different molecular beacons respond differently to the change of salt concentration, which could be attributed to the differences in their backbones and constructions. We have found that the stemless PNA beacon hybridizes rapidly to the complementary oligodeoxynucleotide and is less sensitive than the DNA beacons to the change of salt thus allowing effective detection of nucleic acid targets under various conditions. Though we found stemless DNA beacons improper for diagnostic purposes due to high background fluorescence, we believe that use of these DNA and similar RNA constructs in molecular-biophysical studies may be helpful for analysis of conformational flexibility of single-stranded nucleic acids. With the aid of PNA "openers", molecular beacons were employed for the detection of a chosen target sequence directly in double-stranded DNA (dsDNA). Conditions are found where the stemless PNA beacon strongly discriminates the complementary versus mismatched dsDNA targets. Together with the insensitivity of PNA beacons to the presence of salt and DNA-binding/processing proteins, the latter results demonstrate the potential of these probes as robust tools for recognition of specific sequences within dsDNA without denaturation and deproteinization of duplex DNA.     

Controlled Self-Assembly of Metallacycle-Bridged Gold Nanoparticles for Surface-Enhanced Raman Scattering

In this work, well-defined two-dimensional metallacycles have been successfully employed for the well-controlled self-assembly of gold nanoparticles (AuNPs) into discrete clusters such as dimers, trimers, tetramers, pentamers and even hexamers at the water–oil interface for the first time. Furthermore, the modular construction of metallacycle molecules allows precise control of spacing between the gold nanoparticles. Interestingly, it was found that interparticle spacing below 5 nm created by molecular metallacycles in the resultant discrete gold nanoparticle clusters led to a strong plasmon coupling, thus inducing great field enhancement inside the gap between the NPs. More importantly, different discrete clusters with precise interparticle spacing provide a well-defined system for studying the hot-spot phenomenon in surface-enhanced Raman scattering (SERS); this revealed that the SERS effects were closely related to the interparticle spacing.     

Design of sugar–oligonucleotide conjugates installed gold nanoparticle for effective delivery to hepatic parenchymal cells

A novel oligonucleotide delivery system that is based on oligonucleotide–nanoparticle conjugates has been described. Installed oligonucleotides were modified with the carbohydrate at the 3′ terminus, accordingly, constructed nanoparticles display clustered carbohydrates on their outer layer for the targeted delivery of oligonucleotides. The method for the construction of ligand-functionalized nanoparticle was simple and reproducible. The stability of the nanoparticles displaying clustered carbohydrates greatly increased in serum compared to nanoparticles without carbohydrates. In order to investigate the targetability of oligonucleotide–nanoparticle conjugates into primary hepatic parenchymal cells, freshly isolated rat hepatocytes were incubated with nanoparticles and the amount of internalized gold nanoparticles was evaluated by an inductively coupled plasma mass spectroscopy analysis. Nanoparticles displaying clustered carbohydrates internalized more efficiently than nanoparticles without carbohydrate modifications. In particular, the cellular uptakes of oligonucleotide-conjugated gold nanoparticle increased 1.7 ～2.0-fold by galactose modification. Competition assay revealed that clustered galactose enhanced the internalization of the nanoparticle into primary hepatic parenchymal cells by a receptor-mediated process.

The use of 6-carboxynaphthofluorescein phosphoramidite in the automated synthesis of quencher-dye oligonucleotide probes (QDOPs)

Real-time detection and quantitation of specific amplicons have been achieved using quencher and dye-labeled oligonucleotides such as molecular beacons. The molecular beacon molecule has a fluorescent reporter dye at the 5′-end and a quencher at the 3′-end. When the closed molecular beacon is excited by irradiation, the reporter fluorescence is greatly reduced by quenching through the process of fluorescence resonance energy transfer. When the molecular beacon hybridizes to the target, the stem loop opens making the fluorophore and quencher spatially distinct, thus increasing the reporter dye fluorescence intensity. Labeling of dyes to 5′-end of oligonucleotides has been done typically using manual methods, it is possible to do manual coupling at the milligram scale. Described here is the development of a scalable process for oligonucleotide labeling, which is robust, and has been achieved for 6-carboxynaphthofluorescein by connecting it to a corresponding phosphoramidite [Theisen, P.; McCollum, C.; Upadhya, K.; Jacobson. K.; Vu, H.; Andrus, A.; Tetrahedron Lett.1992, 33, 5033-5036].     

基于纳米金胶标记DNA探针的电化学DNA传感器研究

以纳米金胶为标记物,将其标记于人工合成的5-端巯基修饰的寡聚核苷酸片段上,制成了具有电化学活性的金胶标记DNA电化学探针;在一定条件下,使其与固定在玻碳电极表面的靶序列进行杂交反应,利用ssDNA与其互补链杂交的高度序列选择性和极强的分子识别能力,以及纳米金胶的电化学活性,实现对特定序列DNA片段的电化学检测以及对DNA碱基突变的识别.