Unprecedented Cu-catalyzed coupling of internal 1,3-diynes with azides: one-pot tandem cyclizations involving 1,3-dipolar cycloaddition and carbocyclization furnishing naphthotriazoles

A one-pot protocol for the synthesis of triazole-annulated polyheterocycles via metal-catalyzed coupling of internal 1,4-disubstituted 1,3-diynes and organic azides has been described. The mechanistic rationale for the reaction suggests tandem cyclizations involving copper-catalyzed cycloaddition and 6-endo carbocyclization reactions. The cascade cyclization leads to an increase in molecular complexity to furnish naphtho[1,2-d]triazoles in satisfactory yields. The generality of the method has been demonstrated by using a series of aromatic/aliphatic azides and symmetrical internal 1,3-diynes.     

1,1,2-Trihaloalkenes and Dimeric Acetylenes from Acetylenic Tellurium Species

Reaction of 1-teliuroalk-1-ynes with bromine and iodine or with Cu(II) chloride furnishes respectively 1,1,2-trihaloalkcnes and 1,4-disubstituted 1,3-diynes.     

CuI/iodine-mediated homocoupling reaction of terminal alkynes to 1,3-diynes

A facile and efficient pathway for CuI/iodine-mediated homocoupling reaction of terminal alkynes to symmetrical 1,4-disubstituted 1,3-diynes in good to excellent yields was reported.     

Regioselective synthesis of fluoroalkylated [1,2,3]-triazoles by Huisgen cycloaddition

A series of fluoroalkylated 1,4-disubstituted [1,2,3]-triazoles were synthesized by the 1,3-dipolar cycloaddition of fluoroalkylated azides with terminal alkynes in the presence of Cu(I) salt as catalyst at room temperature. All the reactions were performed in highly regioselective with 1,4-disubstituted, no 1,5-disubstituted product was formed. For aryl or alkyl-alkyne, triethylamine should be used as ligand. But for propiolic ester(amide), triethylamine couldn’t be used, otherwise no products was formed. A mechanism of Cu(I) inserting the internal alkyne was suggested.     

Copper(I)-catalyzed synthesis of 2,5-disubstituted furans and thiophenes from haloalkynes or 1,3-diynes

A regioselective synthesis of 2,5-disubstituted furans using copper(I) catalyst from haloalkynes in a one-pot procedure has been reported. This chemistry proceeds through the hydration reaction of 1,3-diynes, which can be readily prepared from the coupling reaction of haloalkynes in the presence of CuI. The procedure also can be used for the facile synthesis of 2,5-disubstituted thiophenes.     

Synthesis of 1,4-diarylsubstituted 1,3-diynes through ligand-free copper-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids

An efficient method of ligand-free Cu-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids was developed. When CuI was employed as the catalyst and I₂ as the oxidant, the decarboxylative homocoupling reaction for C_sp–C_sp bond formation in DMSO underwent smoothly to afford the corresponding 1,4-disubstituted 1,3-dialkynes in good to excellent yields without any organic ligands. This catalytic system was applicable to aryl propiolic acids bearing different steric, electronic, and functional groups.     

Efficient synthesis of allylic azides and one-pot regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles from homoallyl alcohols

This protocol is for an expedient and operationally simple synthesis of allylic azides and one-pot synthesis of 1,4-disubstituted 1,2,3-triazoles from homoallyl alcohols. Synthesis of allylic azides involves the palladium-catalyzed hydroazidation of unactivated olefins with migration of double bond. This hydroazidation can be coupled to Cu(I) promoted 1,3-dipolar cycloaddition to afford the corresponding 1,4-disubstituted 1,2,3-triazoles.     

Synthesis of Isomeric Dimers of Deoxycholic Acid Derivatives Linked by 1,2,3-Triazole

Steroidal propargylic ester 6 and the propiolic ester 7 were prepared in a few steps from the deoxycholic acid. The Huisgen cycloaddition reaction of alkynes 6 and 7 as dipolarophiles with a 1,3-dipolar compound, the azide 5, afforded the dimeric compounds 8 and 9, respectively, in good yield. The dimers of deoxycholic acid derivatives linked by 1,4-disubstituted 1,2,3-triazole were characterized by spectroscopic methods.     

Synthesis of 1,2-disubstituted acetylenes via copper-catalyzed Suzuki coupling of organoboronic acids with 1,1-dibromo-1-alkenes

An efficient synthesis of 1,2-disubstituted acetylenes has been described. Reactions of organoboronic acids with 1,1-dibromo-1-alkenes in the presence of a catalytic amount of CuI (10 mol %), 8-hydroxyquinoline (10 mol %), and using potassium phosphate as base in C₂H₅OH afforded the desired 1,2-disubstituted acetylenes in good to excellent yields. It is important to note that the formation of 1,3-diynes, which are derived from the homocoupling of 1,1-dibromo-1-alkenes, can be almost completely suppressed under these optimized conditions.     

Reversal of selectivity in gold-catalyzed cyclizations of 3,3-disubstituted 1,4-diynes

A general synthetic access to 3,3-disubstituted 1,4-diynes bearing a quaternary carbon center from acetylacetone was developed. The compounds were cyclized to the corresponding enol ethers by cationic gold complexes. The reactions occur in complete exo-selectivity in contrast to compounds incorporating an alkoxy substituent in the 3-position. A mechanistic rationale for this reversal of selectivity is provided.     

Synthesis and characterization of polycarbonyl compounds via their BF2-adducts

A cobalt-catalyzed 1,4-hydrovinylation reaction is the key step in the synthesis of 1,3-dicarbonyl and higher tri- and tetracarbonyl compounds after ozonolysis of the 1,4-diene intermediates. For the isolation and characterization of the products, the 1,3-dicarbonyl subunits were complexed with a BF(2)- or a BR(2)-fragment eliminating the keto-enol tautomerisation. Other 2,3-disubstituted 1,3-butadienes can be generated by a Grubbs enyne metathesis of a symmetrical internal alkyne with ethene. After hydrovinylation and ozonolysis, other 1,3-diketones are accessible.     

Diastereoselective Synthesis of Cyclododeca-1,6-diallenes ( = cyclododeca-l,2,6,7-tetraenes)

The synthesis of substituted cyclododeca-1,6-diallenes.( = cyclododeca-1,2,6,7-tetraenes) from cyclododeca-5,11-diyne-1,4-diols is described (Schemes 1 and 3). The ca. 1:1 mixtures of the stereoisomers of the cyclododeca-1,6-diallenes were formed in high yields from the ca. 1:1 diastereoisomer mixtures of the 1,4-disubstituted cyclododeca-5,11-diynes by reactions with Me₂CuLi or t-BuMgCl/Cu^II. In mechanistically relevant experiments with the pure diastereoisomers of 1,4-dimethylcyclododeca-5,11-diyne-1,4-diol, it is demonstrated that the configuration is conserved in these reactions. The first synthesis of a 1-substituted cyclododeca-2,8-diyne bearing only one propargylic leaving group gives access to a mixed 12-membered allen-yne (Scheme 5).     

Atom-economical chemoselective synthesis of 1,4-diynes and polysubstituted furans/pyrroles from propargyl alcohols and terminal alkynes

Under different conditions, the reaction of propargyl alcohols and terminal alkynes leads to the selective formation of 1,4-diynes and polysubstituted furans/pyrroles. Water is the only byproduct in the selective synthesis of 1,4-diynes and pyrroles, and the strategy for the furan synthesis is of 100% atom economy.     

Synthesis of 1,3-diynes via palladium-catalyzed reaction of 1, 1-dibromo-1-alkenes

[reaction: see text] Both symmetric and unsymmetric 1,3-diynes were prepared from the palladium-catalyzed reaction of 1,1-dibromo-1-alkenes. The formation of symmetric 1,3-diynes 2 (homocoupling) was catalyzed by a weak ligand, tris(2-furyl)phosphine (TFP), and the addition of catalytic amount of CuI accelerated the reaction. The synthesis of unsymmetric 1,3-diynes 4 (the Sonogashira reaction) required a highly electron rich tris(4-methoxyphenyl)phosphine as the ligand, and CuI promotes the formation of byproduct 1,1-diynyl-1-alkenes 5.     

Domino synthesis of 1,3-diynes from 1,1-dibromoalkenes: a Pd-catalyzed copper-free coupling method

Pd-catalyzed domino synthesis of 1,3-diynes was accomplished using 1,1-dibomoalkenes under copper-free coupling conditions. This domino procedure involves base mediated in situ generation of 1-bromoalkyne and its subsequent coupling to give 1,3-diyne. The optimized copper-free coupling method afforded good to high yields of symmetrical 1,3-diynes in a one-pot operation.     

Synthesis of disubstituted imidazo[4,5-b]pyridin-2-ones

Regioselective palladium-catalyzed amination of 2-chloro-3-iodopyridine followed by a subsequent palladium-catalyzed amination leads to 2,3-diaminopyridines. Treatment with triphosgene affords highly functionalized unsymmetrical imidazo[4,5-b]pyridin-2-ones in just three synthetic steps. A two-step synthesis of pseudosymmetrically disubstituted imidazo[4,5-b]pyridin-2-ones, 1,4-disubstituted pyrido[2,3-b]pyrazinediones, and 1,3-disubstituted thiadiazolo[3,4-b]pyridin-2-ones is also described.     

Green synthesis of 1,3-diynes from terminal acetylenes under solvent-free conditions

Herein, we report the microwave-assisted synthesis of 1,3-diynes from terminal acetylenes, catalyzed by CuI and tetramethylethylenediamine, in the presence of air as the oxidant, at 100 °C for only 10 min under solvent-free conditions. This efficient methodology allowed the homocoupling of several terminal alkynes in moderate to excellent yields. Moreover, the same protocol was also applicable for the synthesis of some unsymmetrical 1,3-diynes through the cross-coupling reaction.     

Ruthenium-catalysed double trans-hydrosilylation of 1,4-diarylbuta-1,3-diynes leading to 2,5-diarylsiloles

Dihydrosilanes undergo double trans-hydrosilylation with 1,4-diarylbuta-1,3-diynes in the presence of a cationic ruthenium catalyst to afford 2,5-diarylsiloles: in particular, 9-silafluorene is a good hydrosilylating agent to produce spiro-type siloles in good yield.     

Head-to-head polymers. XV. A facile synthesis of 2,3-disubstituted succinates and butanediols-1,4

A synthetic approach that makes symmetrically 2,3-dialkyl-substituted succinates and compounds prepared from 2,3-dialkyl-substituted succinates easily available has been developed. Coupling of α-bromoalkanoic esters with a zinc/copper couple produced in about 40% yield 2,3-disubstituted succinates which were reduced with LiAlH₄ to 2,3-disubstituted butanediols-1,4 in nearly quantitative yields. Some 2,3-disubstituted butanediols-1,4 were cyclodehydrated under reduced pressure with KHSO₄ to 3,4-disubstituted tetrahydrofurans or acetylated and the diacetyl compounds pyrolyzed at 525°C to 2,3 disubstituted butadienes-1,3. The length of the alkyl chains of the 2,3-dialkylsuccinates and consequently the 2,3-dialkylbutanediols-1,4 ranged from C₂ to C₁₆. 2,3-Disubstituted butanediols-1,4, 2,3-disubstituted butadienes-1,3, and 3,4-disubstituted tetrahydrofurans are interesting monomers for polymerization experiments.     

Regioselective synthesis of 1-(2,6-dichloro-4-trifluoromethylphenyl)- 4-alkyl-1H-[1,2,3]-triazoles

A new and efficient method for the synthesis of 1-(2,6-dichloro-4-trifluoromethylphenyl)-4-alkyl-1H-[1,2,3]-triazoles by the room temperature 1,3-dipolar cycloaddition of (2-azido-1,3-dichloro-5-trifluoromethyl)benzene with terminal alkynes in the presence of Cu (I) salt as catalyst is reported. All the reactions gave 1,4-disubstituted products with high regioselectivity, as no 1,5-disubstituted product was formed. The structures of all the title compounds have been confirmed by elemental analysis, 1H- and 13C-NMR and in addition, the structure of compound 5a was investigated by X-ray crystallography.